Original ROM installation on LG Optimus One P500 with root removal and ClockWorkMod Recovery - video tutorial

Hi friends, today's tutorial we will see how we bring our Android smartphone to the state it was when I bought it or how we flash-ui original ROM. Specifically, we'll see how we get rid of the root (if we phone at root) and how to reverse ClockWorkMod Recovery, what recovery image allows us to backup our Android phone. That allows us to get phone service at no worries about where it has a problem (rooted phone is not covered by warranty).
About how to flash the recovery image uieste ClockWorkMod Recovery and how we do a backup or as a flash-UIM Custom ROM have already made a tutorial in the past.
Why would we want to do and get rid of ClockWorkMod unroot Recovery?
If your Android phone is still under warranty and you want to send in service, the warranty will not be covered if your phone is at the root!
Basically through a tutorial today to see how we bring the phone to the state it was (in terms of software) when I bought it and turned it on for the first time. We escape and Recovery ClockWorkMod root and all through the method outlined in the tutorial today.
Here are a few steps IMPORTANT that must make them before we plunge:
- turn off all applications, browsers and everything else running on your computer
- disconnect all USB devices connected to the computer
- turn off or uninstall the firewall and antivirus
- remove the SD data card from the phone as well as the SIM card
- make sure you have the drivers installed for your phone. If you do not have them installed, in the tutorial I showed you where to download them
- connect the Android smartphone to the computer through the data cable that came with it and follow the steps presented in the video tutorial.
To do what we wanted, we need the following:
- KDZ_FW_UPD_EN (KDZ Updater) which we will download as shown in this video tutorial
- Original LG Firmware that will allow us to download the Original ROM for LG Optimus One P500 and download it here: http://forum.xda-developers.com/showthread.php?t=1073827
- LG_PCSuiteIV_Setup which will install the drivers for LG Optimus One P500 (in case you don't have the drivers already installed). It was shown in this video tutorial where you can download LG_PCSuiteIV_Setup
Further steps will have to go through the tutorial video. The method used in the tutorial can be applied in case you forget brick-phone, which is called unbrick your phone. That said, I invite you to watch the video tutorial to see exactly how to install the ROM on LG Optimus One original P500 and how to reverse ClockWorkMod Root and Recovery

........................

Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 700 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.

Instructions for use videotutorial.ro

Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.

Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.

Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !

Adrian Burlugeanu.... linux.videotutorial.ro



Related Tutorials


About Cristian Cismaru

I like everything related to IT&C, I like to share the experience and information I accumulate every day.
Learn as you learn!

Comments

  1. Tablet PC while you're fashion and can make a ROM installation tutorial on these devices

    thank you.

  2. Adrian're the best! This really expect, you all my respect! Keep up the good work with Android tutorials!

  3. How to root "orange san francisco"? I know it's possible? Thanks for your attention.

  4. how to root "orange san francisco"? I know it's possible.

  5. Adrian I did a root of joy I 2.2.1 root wildfire with unrevoked and revolutionary Nuami can get rid of it as I get back to S-ON not OFF, as did backup android old iam broke somehow only have nothing if I give the factory reset just simply have nothing on display than pale wallpaper, what to do that I somehow broke the phone only can you get rid of a revolutionary idea? As we better leave it so she knows what the plant root do I put Cyanogen Mod 6.1.0 7.1.0 and we market and fm radio, and I returned to 2.2.1 with HTC SENSE, what? How much does it cost sal resoftez again?

  6. FaraVirusi said

    Awesome tutorial, I'm curious who is the other way to install the original rum.
    I have some questions:
    1) If my phone Lg Optimus One P500 bought from Vodafone, which I have because I use unlocked phone reviews protocalie. If you return to Original ROM and you will need to detune?
    2) Guess Original ROM is Android Froyo 2.2?

  7. If you say that I imfectez Android OS and make it Original Rum method, and return and to factory settings. My phone is that when I took it out of the box?

    • AdrianGudus said

      FlorinP:
      If you say that I imfectez Android OS and make it Original Rum method, and return and to factory settings. My phone is that when I took it out of the box?

      When you root your Android phone you are practically still doing a virus, you use an exploit to activate the root. It is a "virus" used for clean purposes that will allow you to unlock some features of the system that you do not normally have access to.
      Now, since I said that doing that tutorial root bump I think the answer to your question already has an answer, right?

  8. Hello again, I followed the tutorial and I have done almost the same as in him, but when it came to the part where I have to remove all of the USB ports, I even removed all for the mouse and keyboard are USB, and I would not be could continue without them. The second thing that I did, is that I put the card simulator and I followed the steps in the tutorial and I knew it must be removed only after I went to finish the tutorial. Now comes the problem. After I finish and I came off the phone, it does not start, and in emergency mode screen appears yellow to me not green. I think I've managed brickuit phone, but do not worry me very much, because I know that it can solve. So please if you can do these days debrickuit phone tutorial, I'd be grateful. Thank you!

    • AdrianGudus said

      Mihaita:
      Hello again, I followed the tutorial and I have done almost the same as in him, but when it came to the part where I have to remove all of the USB ports, I even removed all for the mouse and keyboard are USB, and I would not be could continue without them. The second thing that I did, is that I put the card simulator and I followed the steps in the tutorial and I knew it must be removed only after I went to finish the tutorial. Now comes the problem. After I finish and I came off the phone, it does not start, and in emergency mode screen appears yellow to me not green. I think I've managed brickuit phone, but do not worry me very much, because I know that it can solve. So please if you can do these days debrickuit phone tutorial, I'd be grateful. Thank you!

      Very bad of you! So you need to read if you run like hell incense!
      Correct steps to be followed before watching a video tutorial:
      1. It reads the text above tutorial very carefully. It should not be ignored because it is very important, just as important and sometimes more important than video tutorial.
      2. After reading the text above tutorial entirely, you play the video and watch it head-tail without rewind
      3. If you want to stop letting and comment, it is desirable and even necessary to read the tutorial first reviews already posted many times that it is possible that someone had the same problem before you have received and responded to it.

      Not put into practice until you have read the tutorials and have not acknowledged the text is above tutorial! The text is often important notes or warnings or details on what goes and what does not, what operating system is available as mentioned in the tutorial, and so on.

      If you are still ignorant, you think you are too "skilled" and refuse to read the text above the tutorial, at least make sure you have watched the tutorial head-to-tail and only then can you implement what was shown in the video tutorial.

      • AdrianGudus: The text above to read the tutorial very carefully. It should not be ignored because it is very important, just as important and sometimes more important than video tutorial.

        As I have done? Let that card thing is not my fault that I looked forward to the end, but to some extent it's your fault, that you have forgotten, but do not blame you, it's human to forget something. But all USBs as I had emptied it, because I would not have continued without mouse and keyboard. Thanks for the instructions, but that is already consumed and criticism not help anything, so please when you have time to do that tutorial. I have searched the net and found some tutorials but I do not trust, because it is a sensitive issue, and you're the only one who can help me.

  9. Goods!

  10. LiviuFlorin said

    I'd like to remind you a small look at this gorgeous tutorial, namely, to do nothing that the computer runs a few minutes on how ROM writing is good time to disable the screen saver or to give a very long time to not be surprised to be activated during this process.
    I'd like to ask about when can the same type tutorials and Samsung Galaxy S2, Tutorial with KIES?

  11. FaraVirusi said

    After you have installed the new ROM Original've had Froyo or Gingerbread?

    • FaraVirusi said

      FaraVirusi:
      After you have installed the new ROM Original've had Froyo or Gingerbread?

      I see neither the hell not telling me: ((
      I did install the rum and is Froyo.

  12. Adrian I copied V10R_00.kdz ROM and would like to know if it is possible to do it in ISO format

  13. We debrickuieste a tutorial on how to p500 lg. It happened with KDZ and the service took a JTAG tool to revive. Until this tutorial do not have the courage to touch the KDZ.
    Thanks for your tutorials are very helpful.

  14. AdrianGudus said

    Mihaita: As I have done? Let that card thing is not my fault that I looked forward to the end, but to some extent it's your fault, that you have forgotten, but do not blame you, it's human to forget something. But all USBs as I had emptied it, because I would not have continued without mouse and keyboard. Thanks for the instructions, but that is already consumed and criticism not help anything, so please when you have time to do that tutorial. I have searched the net and found some tutorials but I do not trust, because it is a sensitive issue, and you're the only one who can help me.

    The steps are identical for unbrick. If you try to reflashuiesti, you get this phone not found.
    Next, turn off the KDZ, remove the data cable from the smartphone, remove the battery from the smartphone and put it back. Now you reopen KDZ, and press the volume up and back keys while inserting the data cable into the smartphone (I managed to do this alone although at first it seemed impossible, I have a few fingers a little longer) Keep them pressed (make sure as in KDZ everything is set as I mentioned in the tutorial) and click on Launch software update continuing to hold the volume up and back keys on the smartphone. You can release them (volume up and back keys) only when you see that KDZ starts counting…

  15. valentine said

    Hi, I would like to know if you can install a newer version of Symbian on Nokia n95 verse. note. S60 3rd 1 edition feature pack.

  16. I can do over the phone if you do not light up? command takes no

  17. justclaudiusss said

    hello, you can make a tutorial pls installing an alternative to google maps on android? would be more useful if you do all the steps in a p500 :)

  18. very good tutorials ..... and I'd like a tutorial on how to put on Optimus One cyaogenmod ..... Many thanks

    • AdrianGudus said

      -I-:
      very good tutorials ..... and I'd like a tutorial on how to put on Optimus One cyaogenmod ..... Many thanks

      If you read the text above tutorial, you know, there are already tutorial about it and you link to it in the text above tutorial!

  19. I sall not find the LG Optimus Hub freware e510 c I do?

  20. Dimi good and I have a question I k in total bricuit :))) lg p500 only way nimik emergensy not see any lights at all niciotasta ecrand Perge not black nor usb to pc sees not that she can do? get this software? but the second method that is? still waiting for answers luck

  21. [HKEY_LOCAL_MACHINE_CRACIUN \ Happy Birthday \ Merry Christmas! \ Www.videotutorial.ro/ \ Cristi Adrian \ admin]

  22. FF Salut.Asi want and more if you can please put a tutorial (for LG P920), namely: how to reverse ClockWorkMod Recovery because I ate year I rotated back I mentioned installed without installing any room a because I was afraid that ami catch ears and stayed with him (ClockWorkMod Recovery) got rid of root and unroot but I did ClockWorkMod Recovery reusesc.Cand not you give me no factory reset android appears the small and boxy but my display for the program. (mention that I dezinstalt that program thinking that I will get rid of him but in vain)

    • MARIUS:
      Doris Salut.Asi FF please more if you put a tutorial (for LG P920), namely: how to reverse ClockWorkMod Recovery because I ate year I rotated back I mentioned installed without installing any room something that was my fear, that ami catch ears and stayed with him (ClockWorkMod Recovery) got rid of root and unroot but I did ClockWorkMod Recovery reusesc.Cand not you give me no factory reset android occurs at small and boxy but my display for the program. (mention that I dezinstalt that program thinking that I will get rid of him but in vain)

      MAENTIONEZ the whole thing ABOVE AM FACUTO because he wanted to install Android version 2.3 because the phone is taken from 2.2 VERSION AND ORANGE AND ARE NOT ANCA VERSION OF INCOME FOR TELE 2.3 lock (P920)

  23. can do this on a htc wildfire? pr mode7 cyanogen and I want to get rid of el.nu I do back up when I installed

  24. I would like if you can another download link than on multiupload for MIUI-Gen71 v0.666 Suicidal Edition… ..multiupload does not load :)) if you can help me who give a beer :) app GOOD JOB for tutorial

  25. Good. Congratulations tutorials created. I have been a big help to root, install custom ROMs and ClockWorkMod Recovery and especially debrickuirea P500 phone. But a question that me off: All above actions should be carried out on the computer, because I tried to install the original rum on the phone with KDZ on laptop and gave me a number of errors, managed to brickuiesc. We resumed all those mentioned in the tutorial on the computer and I managed to debrickuiesc.

  26. AdrianGudus said

    Bangy:
    Good. Congratulations tutorials created. I have been a big help to root, install custom ROMs and ClockWorkMod Recovery and especially debrickuirea P500 phone. But a question that me off: All above actions should be carried out on the computer, because I tried to install the original rum on the phone with KDZ on laptop and gave me a number of errors, managed to brickuiesc. We resumed all those mentioned in the tutorial on the computer and I managed to debrickuiesc.

    I doubt that just because you use a laptop this happened. I did uirea flash original ROM and a virtualbox and everything worked as it should (do not try this at home!)
    I'd rather the fault was probably windows you had on that laptop, antivirus or other security software you had on it ....
    Probably you have not installed the drivers for smartphones as it should ....

  27. AdrianGudus: I doubt that just because you use a laptop this happened. I did uirea flash original ROM and a virtualbox and everything worked as it should (do not try this at home!)
    I'd rather the fault was probably windows you had on that laptop, antivirus or other security software you had on it ....
    Probably you have not installed the drivers for smartphones as it should ....


    It can. The drivers were installed fine, I installed previously LGpcsuite4. I tend to think that did not work, because after installing msmlx.msi, I did not restart the laptop. On the computer I did aceeiasi steps, but after each gave installer needed to restart the computer and had no problems. I mention that I did rootarea phone on laptop and went smoothly. I followed the steps in your tutorial. Either you are the best. I watched all the tutorials on this phone. And debrickuirea phone all the methods described to you we managed to do it.
    Keep up the good work

  28. rvdogaru said

    Hello, I brickuit phone and managed to debrickuiesc again, now half-1 2 month ...
    Now I wanted to put the original rum, for that I'm tired of custom ROMs etc etc. .. all well and good until the opening .. the android logo appears, but stays there .. I did the same process 4 times now 2 months now ... the first time I came debrickuirea ..: (
    What could it be? Thank you :).

  29. rvdogaru said

    I forgot to mention that it doesn't write at the end === FINISHED === or how it says :) .. it just writes like The process finished or something like that..and it does some "schemes" there and resets the phone, it reaches android logo and after nothing… I hope it works…

  30. rvdogaru said

    In the end, === FINISHED === appeared, but it still stays locked to the android logo… I don't know what to do with it anymore 🙁

  31. AdrianGudus said

    rvdogaru:
    Hello, I brickuit phone and managed to debrickuiesc again, now half-1 2 month ...
    Now I wanted to put the original rum, for that I'm tired of custom ROMs etc etc. .. all well and good until the opening .. the android logo appears, but stays there .. I did the same process 4 times now 2 months now ... the first time I came debrickuirea ..: (
    What could it be? Thank you.

    You followed exactly the steps outlined in the tutorial? head-tail tutorial you watched? you read the text above tutorial entirely?
    Did you get the data card and the SIM card before you get to debrick-Uriah?
    try to debrick your smartphone on a newly reinstalled Windows without any other software installed on windows, only the drivers, UAC - User Account Control disabled if you use Vista or Windows 7, without antivirus installed and no firewall turned on, without nothing connected to the unit except monitor, keyboard and mouse (without internet cable… you download everything you need for debrick-uire before)

    • AdrianGudus: The steps are identical for unbrick. If you try to reflashuiesti, you get this phone not found. Further KDZ stops, remove the data cable from smartphone to smartphone battery is removed and put back. Now reopen KDZ, press and hold volume up and put back in while in smartphone data cable (I managed to do this alone although at first seem impossible, I have some long fingers less) continue to hold down (make sure KDZ that everything is set as mentioned in the tutorial) and click on Launch updatecontinuand software to keep press volume up and back to smartphone. You can issue (volume keys up and back) when you see KDZ abi begins counting ...

      AdrianGudus: You followed exactly the steps outlined in the tutorial? head-tail tutorial you watched? you read the text above tutorial entirely? Did you get the data card and the SIM card before you get to debrick-Uriah? trying to debrick-uiesti smartphone on a freshly reinstalled Windows without any other software installed on the windows, only drivers, UAC - User Account Control turned off if you use Vista or Windows 7 without antivirus installed and no firewall turned on, no longer have nothing connected to the unit than the monitor, keyboard and mouse (wireless internet ... before you download everything you need to debrick-uire)

      I have lg optimus s brickuit ground, but I can use it. When I go into recovery mode appears greenish yellow background. Another rom I could not install.

  32. Man you are great thanks .. I did and Phone

  33. A small question, if I follow the same steps in this tutorial and for LG Optimus Net or P690 would functinona? I put the original software p690 or goes wrong?

  34. You have good tutorials and made it very seriously just think that you are here at this level.
    I have a question if you can, have a 5800 nokia symbian operating system and I want to know if I can put them phone.O android or windows to make a tutorial about this?
    Thank you!

  35. sal, I also have a problem, I tried to install cyanogenmod on an lg e510, it restarted and does not want to start at all. I tried with emergency and with the battery removed and nik. I tried with kdz, lgmdp and in vain. he doesn't see my phone at all in the computer and not in an emergency… .plz help

  36. related to android on nokia… no chance :))

  37. Dragos said

    I have a LG E400 I root and then I installed ROM Manager.Am entered it and gave the first thing that pops up (flash CMW recovery) and was expected blocat.Am some time but nothing, I tried to close it and it did not work then I removed the battery and now when I give her to flash LG emblem has tried mereu.Am thing Volume D + Home + Power and nimic.Daca can help me wait a long raspuns.multumesc

  38. Marian Petcu said

    Good seara.Tutorialul is goldmine for us and many thanks PENRU EL.Ca on here I get my ass eaten from cyanogen android 4.0 from an LG official 2.3.4 2X from Vodafone.Am read 3 or tutorial, I saw twice video.Amscos cards tutorial, I removed all the usb, amoprit node and the Windows firewall, I downloaded all of the lg XDA p990 (2x), I downloaded the original rum The IMEI lg2x with rigor, I installed everything patiently and slowly and it begins to install KDZ 15 seconds after the error and gives me all ready made slowly and with patience and my daughter's laptop which is fairly new (a month) and the same message. now i want to ask two chestii.Prima, if he counts as the phone is locked in vodafone and if you must download another app to install KDZ-ul.Vreau to mention that I tried to I give KDZ program for read phone information and put that same message eroare.Ma to close programmers and search the net for a solution el.sau may have to choose something else instead for lg p990 DIAG.Acum 3GQCT and I made phone after I put the bad ROMs CyanogenMod 5 9 (one room did not work, one could not be called, etc) with a good rom from XDA found all thanks to you and goes well but is still in warranty still one year, I wants to make nou.VA THANKS AGAIN PT tutorials and expect a response!

  39. Darius said

    I managed to ruin my phone twice. Do not do anything. I tried to rewrite the ROM and got stuck while doing upgra. She went into emergency mode whenever da rum all there trying to rewrite stalling. I tried the original software to be upgraded zigea going up from the SRIA 30% and lost about telefonu, to remove the battery and restart it. I did not start only at all. I once happened and so dul lam lau warranty and changed. Just can not do anything? I'm tired of ala original software that when you call someone or someone calls me butonel break appears and press it all the time listening.

  40. Darius said

    Here's the log and made the KDZ:

    [17: 55: 19: 937] ======================================== =====
    [17: 55: 19: 937]: Log is started on 27.05.2012, at 17: 55: 19: 937,
    Executable: D: \! phone LG \ KDZ_FW_UPD_EN \ KDZ_FW_UPD.exe (Procida: 0x00000b84)
    compile time: Jan 3 2010 21: 03: 18
    [17: 55: 19: 937] Version:
    [17: 55: 20: 031]: Get Usb Port
    [17: 55: 20: 031] rsi.strFriendlyName = LGE Android Platform USB Serial Port (COM17)

    [17: 55: 20: 031] FriendlyNameList [iii]. SzFriendlyName = LGE Android Platform USB Serial Port

    [17: 55: 20: 031]: WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM17
    [17: 55: 20: 031]: Port = COM17
    [17: 55: 20: 046]: UNKNOWN: Req (12) -> Rsp (13)
    [17: 55: 20: 062]: UNKNOWN: Req (12) -> Rsp (13)
    [17: 55: 20: 078]: UNKNOWN: Req (12) -> Rsp (13)
    [17: 55: 20: 078]: >> DIAG_STATUS_F FAILED
    [17: 55: 20: 093]: >> Get Model Name [DIAG_VERNO_F]
    [17: 55: 20: 109]: BAD CONN MODE: Req (0) -> Rsp (3)
    [17: 55: 20: 125]: BAD CONN MODE: Req (0) -> Rsp (3)
    [17: 55: 20: 140]: BAD CONN MODE: Req (0) -> Rsp (3)
    [17: 55: 20: 156]: BAD CONN MODE: Req (0) -> Rsp (3)
    [17: 55: 20: 171]: BAD CONN MODE: Req (0) -> Rsp (3)
    [17: 55: 20: 187]: BAD CONN MODE: Req (0) -> Rsp (3)
    [17: 55: 20: 187]: FAIL (No Phone)
    [17: 55: 20: 187] GetModelName () Operation Failed Check Diag CMD
    [17: 55: 20: 187]: EMERGENCY Booting Mode
    [17: 55: 20: 187]: >> Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
    [17:55:20:203] : BS/P690/7D1\Darius\LOCALS~1\Temp\DZ32.t
    [17: 55: 20: 203]: WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P690
    [17: 55: 20: 218] DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
    [17: 55: 20: 218] [DLOAD ERROR] NAK_INVALID_LEN
    [17: 55: 20: 234] DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
    [17: 55: 20: 234] [DLOAD ERROR] NAK_INVALID_LEN
    [17: 55: 20: 250] DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
    [17: 55: 20: 250] [DLOAD ERROR] NAK_INVALID_LEN
    [17: 55: 20: 250] NV Write Fail: NV ITEM 9028 (9028)
    [17: 55: 20: 359]: >> GET DLOAD COMM MODE
    [17: 55: 20: 375] [GetCommMode] Communication mode: 2
    [17: 55: 20: 375]: Pre Nand Download
    [17: 55: 20: 375]: >> Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1 = trusted 0 = NonTrusted)
    [17: 55: 20: 375]: WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
    [17: 55: 20: 390]: [COM17] >> NandFlashInitWithFile (TBL PARTITION)
    [17: 55: 20: 390]: WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
    [17: 55: 20: 406] DLOAD_NAK_F reason_msb = 11, reason_lsb = 11
    [17: 55: 20: 406] [JNAND ERROR] ERR_READ_FAIL
    [17: 55: 20: 421] DLOAD_NAK_F reason_msb = 11, reason_lsb = 11
    [17: 55: 20: 421] [JNAND ERROR] ERR_READ_FAIL
    [17: 55: 20: 437] DLOAD_NAK_F reason_msb = 11, reason_lsb = 11
    [17: 55: 20: 437] [JNAND ERROR] ERR_READ_FAIL
    [17: 55: 20: 437] [COM17] FAIL
    [17: 55: 20: 453]: WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
    [17: 55: 20: 453]: Close Port <
    [17: 55: 20: 453] TYPE_WPARAM_UPGRADE_ERROR
    [17: 55: 20: 453]: ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 1002
    [17: 55: 20: 484]: Log finished

  41. I did it and I do spoil my PHONE not open anything (dead), although I managed to install KDZ ROMUL site reopens but only appears ORIGINAL ANDROID LOGO met without opening I tried once and ME DAT ERROR, PLEASE HELP ME Can I do anything? Or if I go longer warranty available, got rid of the root and RICOVERY, now what I have ELCU although not open.

  42. Darius said

    There is nothing on the screen? You can not start even with the combination vol up + home + power? Then Blvd to guarantee for that they can not even say that you are to blame.

  43. Marcel said

    Just what I uisem flash a ROM and I do not your going wireless, then flash the ROM look original, and not opened my phone, I bought it in Italy, wrote WIND lights until then Restart 2 times I tried to flash it but in vain uiesc, same thing, no boot so I kept pressing buttons + HOME + POWER until VOLUMEDOWN appeared an android with a box next to it and a bar progress and fortunately returned to factory settings exactly as I bought it!

  44. Applications such stock Youtube, Facebook, Twitter we will find the phone after the unroot?

    • DA will return back to the system applications include Market, Youtube, Facebook, Twitter, even if they were removed when he was at the root

  45. sall! I got the LG Optimus p500 and has no operating system I tried that tutorial and anything goes and you have to restart starts and an image appears white with spots and always restarts! and if you then start normally arises lg picture box and the android guy then restarts! can someone help me?

  46. 17: 47: 32: Step Complete: Reset Phone (DLL Cmd) does not appear and the phone does not remain on how to load! please help me! Thank you!

  47. adrian I tried what you told lu mihaita and nothing all white with spots and before that something appears on black error …… etc! and the emergency mode is still in yellow! can you help me please ?

  48. adrian you can help please do not fail to bring back to life all my phone image appears black with white writing then closes and restarts and emergency mode image is yellow

  49. debbuging usb can not access because I did too much screen and can not access anything from the phone!

  50. I tried the same thing myself but with a LG Optimus Sol and installing end I closed the program and now telefonu lights up with vodafone logo appears after restarts and so on. What can she do?

  51. I installed an ICS 4.04 on the LG E400, I didn't like it (many shortcomings) and now I can't reinstall the original firmware. After following the standard boot procedure, only the Clockworld Mod menu appears and not my android. You said something in the tutorial on a second method of installing an original firmware…. Please help!

  52. Please can and 2 method that does not work is brick. this is :))

  53. I have a friend who flashed that he drove me crazy that he wants 2.2.2 on him that he wants root etc. and I told him to leave him like that 2.3, he didn't and no. And in the end he put it on the stumps, it only starts at all when he presses POWER, he's dead, what else can be done? some say it's the motherboard, others with emergency mode which only nothing appears, he said the screen is black and only does nothing. And it doesn't even work via USB, it only charges the battery, nothing, nothing. What can be done in this case? an LG service somehow? as an answer I did not find anywhere with "not power on" or "not switch on", to help him. What do you say to him? So tel is completely dead !!!

  54. I have an lg optimus black ..and I can't reinstall the original firmware. I also tried with smartflash tool but it doesn't work ..he tells me that the phone was not found ..I tried and open and closed ..I don't know what to do… Please help me too because I don't know what to do

  55. I installed the original software V20H.00 IMI's OK Restart your phone after you spell 6 TOT MIN, THEN ANDROID LG CAR APPEARS ON SCREEN PLAY ALL DA REST nothing that could be? How to start again?

  56. I solved the problem a good day

  57. robert:
    I solved the problem a good day

    robert:
    I solved the problem a good day

    how? I have the same problem?

  58. LG Optimus One Android P500 I 2.3.3 V20h question is can install the firmware on LG Optimus Sol LG Optimus One E730 V20b?

  59. Adrian Gudus said

    Lorand:
    LG Optimus One Android P500 I 2.3.3 V20h question is can install the firmware on LG Optimus Sol LG Optimus One E730 V20b?

    Absolutely not

    • First of all I deactivated LGE modem android platform after which I tried to put the firmware from LG Optimus Net V10A from Romania on my phone I downloaded it I put it on LG KDZ UPDATER> 3GQCT> DIAG I put the kdz file from LG Optimus Net V10A entered it in Emergency Mode, it was awful and it gave me an error, the screen remained, so I took out the battery, I turned it on and the logo from LG appears for a fraction of a second and it enters Emergency Mode. the original firmware Andorid2.3.3 V20h and I gave it so> 3GQCT> EMERGENCY does not work shows me that the phone is not connected although it is plugged into the back port I restarted the computer, I deleted the drivers, I reinstalled the drivers, I removed the battery I put back pornest enter emergency mode I gave again KDZ 3GQCT> EMERGENCY same error 20:21:25: Launching SW update
      20: 21: 25: Unpacking KDZ
      20: 21: 28: KDZ file extraced
      20: 21: 29: Files were extracted.
      20: 21: 29: Load LGMobileDL.
      20: 21: 29: Port =-1
      20: 21: 29: Connecting to phone
      20: 21: 29: PHONE WAS NOT FOUND!
      20: 21: 31: === FINISHED ===

      You make no progress comes loaded directly load Emergency Mode

      Please kindly help!. I see that other users have asked the second method and still have not put

      Thank you for your help.

      • times have you checked debbug or insist it's the rom and I just happened to see you have not started anything to him absolutely, or not to have switched USB data transfer that you do not now what rom KDZ Do you want to put?

  60. Adrian Gudus can put a tutorial to unbrick DOA version

    • lorand tries to somehow make you enter debug mode so that he can read your kdz program otherwise you can search as many programs as you want because he gives you the same phone description …… and if you can't do it go to the service you risk burning the basic success

      • I can not go into debug mode for straight into Emergency Mode! So I just can not get into Android ii BRICK-looking MAINE IL SAD TO SERVICE today I was and asked how much I told them the deal said they can make between £ 50 100 and enter fixing

  61. I have a lg optimus p 500 I put a soft oxygen 4.0.4 and now I give the signal when the signal manual search tells me that's what treebuie er of do not know please Thank ajutatima

    • good problem comes from software you installed
      often not compatible with previous software or seek them out and patch that will activate wifi and the network otherwise you go. otherwise believe everything you work it?

  62. Man, you're strong, I struggled for 8 hours to fix it… and I found the answer here ……
    you are BOSSS… ..

  63. I want to return to the original version of the LG Optimus One P500, but KDZ not open. I mention that Windows 8, and before a month has gone ok, we returned to the original LG ROM, all Windows 8 was then, but now it opens. I changed the compatibility .. I put Windows 7, Wind Xp in compatible mode, but nothing! Same result: Incompatible Program!
    Is there any solution to open this application, apart from changing the Operating System? I love W8. and I would not want to change just for the inconvenience!
    Thanks again by now everyone who tried to help me!
    PS: Thank you guys videotutorial.ro! Are countries, the best! Mullte of your videotutorialele helped me a lot! Being sanatoasi, all the best!

  64. Adrian Gudus said

    Planner: I want to return to the original version of the LG Optimus One P500, but KDZ not open. I mention that Windows 8, and before a month has gone ok, we returned to the original LG ROM, all Windows 8 was then, but now it opens. I changed the compatibility .. I put Windows 7, Wind Xp in compatible mode, but nothing! Same result: Incompatible Program! Is there any solution to open this application, apart from changing the Operating System? I love W8. and I would not want to change just for the inconvenience! Thanks again by now everyone who tried to help me! PS: Thanks guys for videotutorial.ro! Are strong, the best! Mullti of your videotutorialele helped me very much! To be healthier, all the best!

    Try to download the KDZ software again. Another solution would be to use a virtual machine (on this topic there are already several tutorials on our site. Use one of the virtual machines presented by us such as VirtualBox or VMware Player. I also recommend the tutorial on "how to use USB devices in VirtualBox or VMware Player ”)
    To find tutorials, use the search box at the top right of the new site.

  65. I also need a little help… with what I flash a p990. I installed a lewa rum that now doesn't open, I get lg and that's it.

  66. I greet you again guys!
    @ Adrian Gudus I tried virtual machine version, but the original purpose (use KDZ software), all we did. Anyway I like the idea of ​​virtual machine with an OS to another OS, exciting experience!
    Finally I succeeded after ordeal and hours lost in the computer.
    Instead I ended up in W8 in Windows XP OS, believing that everything will proceed the book! I was wrong! This time it was open KDZ, but in Device Manager (My Computer properties), I do not see one modem LGE Android Platform. W8 mentioned that I do not even appear in the modem, although I had all the drivers installed correctly!
    Problem with LGE Android Platform phone was, more precisely ROM that I had installed at the time, namely
    MIUI - 20130625-p500 with Android 4.0.4 (I'm not sure, but I think it calls it Ice Cream Sandwich).
    I changed the ROM with cm-7.2.0-p500 (Cyanogen Mod7), then I connected the phone to pc, this time, I came down the right of the clock, New Hardware, but we have updates done manually in Device Manager, I have started this time-4 5 drivers with questionable orders, I gave another update on every, and it was! Then went razor, he appeared LGE Android Platform, we could not connect to PC Suite. The KDZ I had a bit of fork again, made faces and XP, I uninstalled a few times, and reinstalled MSXML, I gave the KDZ compabilitate Windows 2000, and then open and everything worked normally!
    I managed to restore the phone back to its initial state due to this tutorial! Thank you guys for everything you do for us!
    I hope I don't bother anyone with this long message, but I wanted to express my experience, thinking that maybe someone else is facing this problem, and to know where the "bug" is from!
    Health, and All the best!

  67. I have an LG Optimus One with Froyo installed 2.2 original, which I rooted and I deleted some programs Link2SD (Netlog, Twiter), I made a linux partition on the card and moved the applications on it (Thinkoffice, Google Maps, Gmail and so on). I would like to bring to the initial state in which I bought my question is if I could use this method.

  68. Florian Ţugui said

    Hi, I have a s2 and me. I flashuit novel way 10.2 CyanogenMod and had to install CWM recovery with Odin, how can I get CWM recovery on it?, I want to come back and 4.1, we guarantee to him, and I really wish. L go, thank you! How remove CWM?

  69. I also have a problem after installation when I unplugged the cable and turned on the phone, I got that thing with the name ANDROID how to load the operating system the problem is that somewhere to enter the system crashes for a few seconds and charges again and it stays like this… At Device manager -> Modems I can't get LGE Virtual Modem to disable it and I installed it without disabling it… is that the cause?

  70. Valentin Petre said

    Hello, I have a samsung mini 4 what program would go softtul restored to original. Superuser now I put in he can apply security lock of samsung (being stuck in orange) noc security. Dezactivad it and removing it I could cosmote use the phone.
    What I am asking is how and what software can return to the original rom. Fold samsung mini 4 to receive updates from 4.4.2. Thank you

    • With Odin application. You here boys made a tutorial on how to use. Rom software, you can search the sammobile.com
      I suppose Samsung galaxy mini 4 comes from s4 mini.

  71. Erin Bocsan said

    Hey, why not go after the root is I installed this Rom? on LG optimus sol

  72. hello I have a lg e615f I put the pc suite software works fine but I am Romanian language version reads 4.0.4

Speak Your Mind

*