Setting up a wireless router for net neighborhood network from romtelecom and for net from rds - HD video tutorial

In this video tutorial we will present the configuration or setup a wireless router from TRENDnet networks for several types of net, even if I used a router on trendnet settings are almost similar to most wireless roterelor and beyond, these settings are valid for conventional routers (except wireless settings).

Types of networks to which we have referred in the tutorial are:

1 neighborhood network that runs on Mac's boards retea.Aceasta network configuration is quite strict in that they allow the user to connect to the Internet only with registered card or network card when signing the contract, but November 1st to circumvent this rigid thing we clone a Mac NICs by using a setting they have most routelelor, that we can have normal access through internet getaway.

2 network type romtelecom or clicknet that runs on an ADSL modem or ADSL +, this setting is quite simple and many there is no problem in network configuration, in tutorial I welcomed a little problem that I solved immediately by introduction of DNS addresses that helped to quickly establish contact with Romtelecom servers.

3 The PPPoE network from RDS-RCS which is quite easy to configure if you are a little careful, here the user authentication is done with "user and password", data that were received by each user when signing the service contract with the provider of NET.

In this video tutorial we will present in addition to setting up a wireless connection and securing them, we also show how to do a firmware update for trendnet router.

To secure the wireless connection, we recommend using the WPA2 encryption protocol, which ensures greater security and for which there are no (yet) "aircrack" tools with which such wireless security can be penetrated.

We've created a video tutorial on option port forwording in several versions, both DMZ and creating virtual server connection type.

by Cristian Cismaru


 


Related Tutorials


Comments

  1. beb3_mykk said

    yeah interesting ..: D GRT tried!!!!!

  2. beb3_mykk said

    I see if something comes to me: D http://www.gravatar.com/avatar/f4ca402bcc6d59fd69b54b30782fe7ca?s=80
    f4ca402bcc6d59fd69b54b30782fe7ca

  3. Cristi… a little observation… to know that not everyone from RDS has the username BB1234567 !!! If I'm not mistaken, and I don't think I'm wrong… those letters are the abbreviation of the storm… for example I have GL1234567, and depending on the city the usernam code starts with another 2 letters !!! I drew your attention because in the tutorial you said that there will always be BB at RDS 😀 it's not like that… I hope you don't mind the observation made, it's natural to be wrong!

  4. And one more thing that amazes me… what about the question from “Vote…”? it has nothing to do with what we do here! I don't know… I don't think it has a place… you better do a survey about linux… Do you agree with linux? or what do you think is the best operating system… I don't know you could ask something about why it's here !! I don't understand the question… does any Chinese woman want to marry you and you can't believe it? you don't know what to do, whether to run with her or not? if such a thing is possible? :)) it's your site you can ask what do you want… please… I was just curious why that question? I hope you do not mind!!

  5. Interesting tutorial, but net nam romtelecom or rds.Felicitari.

  6. beb3_mykk said

    Adriane dog that hunts like you mane any mistake as mik bang: D and you better judge your name write something like JUDECATOR_ADRIAN is heavy with you ;)))) aa and app how can I have my avatar: (? ?? k Gravatar account and I had nothing: (

  7. @beb3_mykk: what would you say if I compared you to an animal? but I'm not ready… I'll consider that I didn't see your comment… another time be careful with your vocabulary, be more respectful !!!

  8. boby_admin said

    @Adrian:
    Do you realize that the author of this work was not up to the user to know where the rds.
    The idea is that each knows his user name and password.

  9. @boby_admin: Yes I understood, but I made a small observation, I wanted to come in a way in addition… I think they are and I even know many who have no idea to set netu from rds and where the user and pass are, they have never configured netu… some people called customer relations and the boys from the interventions came to set them up

  10. Yes to me they are in Arges county begins with AG and so on.

  11. beb3_mykk said

    SORRY ADRIANE>… .I don't compare you to a dog k nam dc I was saying what crd can crd wrong but from the comments it's good k you're like that….: D all before 😉 it's good and you know how;;

  12. k scz post here yes I have a problem trying to film with Camtasia Studio 6 a game Burnout (TM) Paradise The Ultimate Box

    Everything goes smoothly give clear and after saving the video shown in reloare
    dc? and I expect a response to e-mail [email protected] . THX

  13. @ionutFX:
    It is a long discussion about programs capture for so long I do screenshots and always greet all sorts of problems.
    In general you know that when you run the game Cunda neighbor he eats all resources and therefore no game will not run and does not capture software to do a good job because he uses almost the same resources.
    In collide head.

  14. @ionutFX: go to settings, choose weaker settings… capture and game quality to be poorer, go to the graphics options in the game and capture software… stop everything running backwards: mess winamp, firefox… just keep running software capture and play, other applications close ..

  15. resolved with Fraps

  16. Careveaa know how xpull will be installed on a laptop? will roggggg!!

  17. boby_admin said

    @SRJ:
    DA
    Vague general question and answer
    DA know

  18. @SRJ: You must include in the CD needed SATA drivers xp your laptop! Or another way: put the Windows CD boot it get yourself a USB flopy include her laptop for the drivers on the CD that you got the laptop, and install!

  19. We welcome, in fact all other suuper tutorialu to all tzinetzi Asha continued else instead I want to ask a passion for it and want to give something next year at a university in the field, I was thinking on the sidelines in software engineering But one question what the future would sound like Asha can do with software engineering or dak not think that ash be won to do something like that Computer Economics, Finance banks on six or polytechnic something what I get bn in May Day day of Astrea so that I can find me some jobs after and informed and updated about this as mutlumesc!

  20. @calin:
    I advise you not concern yourself with what is required and what will be required over I do not know how many years, it is best to do what you love.
    Do what you love, folks, if you do not enjoy something good to come out again.
    The most important thing in life is to be happy, not rich.
    If you do what you love and know that you'll earn big money.
    When you do something for financial gain will not only never be tall, a lifetime to be a mediocre money.

  21. cristi're speaking Greek very well, but I'm not talking about money or want to get out once and a t know the first software company to a large and rich as Bill Gates :)), I'm not referring to the fact their are passionate about thing and I want to make a career in this as other t know I want to make doctors etc economists gave examples nijte asha, I am passionate about Asra both soft and hard and want to do it in life, like what I meant io

  22. @ SRJ
    laptopu put the toilet then flush and see that Asha is installed, only have to be careful not infunzi wcul

  23. @calin: Very "smart" your advice… if you still have these "smart" tips please keep them for yourself !!! Here you help if you know… if you don't refrain you don't post aberrations or swear words, ugly words !! you don't know you don't answer… We are a serious site, and we didn't intend to make fun of anyone, Please be careful in the future and refrain from such "smart" comments !!!

  24. by adrian rd but give rights kand see some dumb questions I can not refrain from comments, well do not ask how to put Pisi in socket

  25. I also have a simple question .. I have a net on upc .. and of course a thompson modem… what is interesting? I want to know how I can change the macu to the modem or at least clone it

  26. @bribes: tell me if you want to do this job I'll help you! WARNING! Two computers with the same mac will not work in the same network. So either have to be separated into two different networks, or another computer must be assigned another mac.

  27. only bribe taking bribe

  28. Well honestly .. that's really the problem… I would like to clone my macu because this modem from upc that works on the net doesn't have an input for the phone and I would like to put it on the net too… I have a phone from upc… that's why I would to put another phone .. for this modem I have to move outputs with the ppt phone plug…

    caline is only written loosely as far as I knew>: P

  29. @bribes: use Mac Makeup, change the mac address as many times as you want and it's free, although it's not clear to me what you want to do… I didn't understand anything from: “I have two phones from upc and I want to have a net on… and I have 2 phones with one phone and I want to put one more… ”:)) To die if I understood something :))

  30. Hi… I have a question too, I would be very happy if you could give me an answer… I live in Spain and I am a truck driver, I got a laptop, I had internet for a month, but in vain I paid, it had no signal and I gave it up… I would be interested to know how I could connect to the internet when I am close to companies or places where I can get internet, what should I do… maybe you have a program to I can connect, you would help me a lot… thank you… hello

  31. @NYK: Wirles networks are secure !!! to help you means to break them! fraud… we won't teach you that!

  32. what did i mean I don't know how to lie and that's why I came out .. I want to give up the upc modem and get another one… I have a friend who rarely goes online and I was thinking that I can do some trick…. on the modem I want to change it not from the network card… I tried with that but I didn't bother but to change the one from the network card… now k you know can you tell me dak works?

  33. @NYK:
    There are a few broken things wireless, of which the best known is that aircrack can only break WEP encryption, WPA or WPA2 still can not be broken.
    Know that if you want to break a network pretty much have to sit beside her tipm to capture a certain number of packets transmitted from the network to the laptop owner.
    You know it's not an easy job, though I wish you success.

  34. @bribes: It didn't work for you… I won't teach you something like that !! don't even pay me! honest… be honest! It's not good to steal, and you'll be caught and you'll be sorry for yourself !!! if I wanted your evil we would help you!

  35. It's fraud, you say… yes, what about the programs you have posted…. How to spy on your neighbor, friend, etc. etc what is that called? :)))) LET'S BE SERIOUS! You really don't want to help a compatriot of yours… here in Spain netu costs 60 euro / month, when you go to them to subscribe I tell you that you have the necessary speed to surf, I take your money and speed and you don't see it… what is it called, they don't have fraud?: (((((

  36. Well, what's so hard to say? Is such a thing forbidden? I was asking for advice… is there software for such a thing? that's all I want to know 😀 dak worth torturing me?

  37. thanks a lot cristi… i will try…

  38. @NYK: If you looked good and I answered no to bribe yourself! look closely! keylogger is not illegal is for sale on the net! e commerce site! so there's nothing illegal on this site!

  39. @bribes: Of course it's forbidden!

  40. Oky… ms anyway… super cool with the tutorials keep it up… you are the coolest 🙂

  41. boby_admin said

    @NYK:
    In Spain and Italy are known to have the world's worst net
    One solution would be if you could find a free hodspot and you can connect for free
    The question to you is do not stay too long in one place and chia if you want to use their programs less legal and you need a certain time to be able to break password
    My guess to try to make your subscription to another firm may have better luck

  42. Cristi, I would like to ask you something else… I don't want to break wireless, because I don't have the necessary time… I would be interested if I could log in for example: when I sit and wait for a company to unload me (I'm a truck driver) , if I can connect to the net from that company… maybe it's a program something? Please… I'm sure you know something :))))

  43. boby_admin said

    @NYK:
    I just nicely tell you the password
    And you if you have a wireless net to your house you did not secure?

  44. I think I tried at the so-called good companies here, and the most expensive and nothing… be sure that if I found something good I would not call for help… I paid my subscription and ready… but you pay it in vain, and you do not have part of the net… at home I have the computer and I am satisfied with the speed I have, but instead on the laptop, which interests me more, no way…

  45. hi, I live in a boarding school and we have wireless internet

    the boarding school is structured as follows: ground floor… floor I… floor II… the router is located on the first floor in the middle of the hall…

    I live on the second floor of the building, but there are 4 laptops in the room… and when the net is usually distributed, the laptops near the door have more speed than those that are further away from the door…
    when there are only 2 laptops connected to the net, it's still the same (that is, we have speed a bit) but if there are all 4 laptops connected, we have a lower speed, those with laptops further away from the door…

    I could not use a program that helps me to have more speed net

  46. boby_admin said

    @ease:
    There is no software for it, who knows what it tells you talking.
    If the router which will emits signal in wireless mode N (draft) you could buy a notebook expansion card that you connected to the port express card that you have on one side of the notebook.
    Noted that this wireless card must support extension and it wireless n.
    If the router does not support this standard (wireless N draft) not much to do.
    Maybe you're lucky and your router supports this standard.
    Success.

  47. I must thank f more!

  48. Iacob Florin said

    FrostWire is full of viruses, especially Trojans, can not download anything, every download is virus

  49. @Iacob Florin: Speak unaware of Uncle! Frostwire does not download viruses, but what you have viruses!

  50. laurentyu said

    sall. uTorrent I got problems I do not download properly with 100 200 kb download to me only maximum 30kb 40 60 and after a few hours with my download 10kb putzin of what I do to download and Fri quickly. please do not ask me to comment and review them my id sp me how to pray than totttttttttttttttt fac.to

  51. @laurentyu: first of all you need to know that the download speed is not only about you and the settings but more about your provider (the company you have a net from)! You can make small tweaks but they won't help you much, an example would be to open more ports, for this I advise you to watch the tutorial about xp-antispy, you can find it with the help of the search engine on the top right of the page, also in the series of tutorials dedicated to torrents we have a tutorial about bitorrent, as well as about utorrent, you can also find them with the help of the search engine from our site… in the tutorial is presented how to download, install and set up these torrent clients! I advise you to watch the tutorials I have recommended to you, with great attention and maybe you will have other results by downloading torrents. Success!

  52. I have a problem: I have a wireless router TP-LINK TL-model WR642G rds connected to modem and I connect a wired desktop and a laptop wirelessly. thing is that when I want to play with someone from your desktop by ip not connecting (when one gives host and to another join). I did that thing with forwarding for uTorrent. thanks

  53. hello! I have a question if you can please help me
    I have a trendnet router TW100-S4W1CA 05.17.04.dupa version that I connect on my browser a window where it asks LOGIN PASSWORD only problem is that the book is a note that says: BY DEFAULT, NO PASSWORD HAS BEEN SET ON THE ROUTER
    Why put his password? as admin does not work
    12345.nimic not want any

  54. dc write no password I don't think you should put anything…. lasi gol dai enter

    to be the complete range a tutorial or makar some comments about the net from c-zone there net cable is not introduced in wan but in lan dc is of interest to anyone….

    and during the firmware update it is indicated or be connected to the cable router… .. otherwise the connection may be interrupted and nush if you resuscitate the router…

  55. I put the lan cable Lam gave enter all feel free to write anything Crashes login

  56. noi2jiogaina said

    I have a simens se3161 router that I used in Romania at romtelecom… I tried to install in Austria it didn't work… the people from the service came and brought me a wireless modem ... how did they know that I was struggling to do I install my router? the same router I tried to install on my sister… it worked for 8 days… and now she asks me to introduce a new ip… who helps me?

  57. norok, paca

  58. I give crysty net of increased sam ups how to do speed dawnland I tried xp antyspy give me tat goes aceyasy ms is the speed you can help advance

  59. @dragos: For you and for all those who are still looking for miracle programs that increase the speed on the net, Brothers, there is no such thing, don't look for green horses on the walls, you have the speed on the net as much as the provider gives you! You can't squeeze and where to squeeze more if he gives you so much! If you want higher speed, call the net company nicely and ask for a higher speed subscription, don't take into account all the software that promises you higher net speed… there is no such thing… if it is not, where to get it god forbid? Does he crank clean and increase your speed? Don't be naive anymore !!!

  60. how to do to have a status without being infected with viruses
    at yahooo messenger

  61. more specific program scz

  62. Because a tutorial is meant to guide you as well as possible for the first time on the right path, without those who will use the information in this tutorial groping in the desire to follow those steps: I have Internet both from RDS and from Romtelecom. For RDS sets - NEVER, but absolutely NEVER and under no circumstances, regardless of the type of router - in the "SERVICE NAME" field - DO NOT ENTER ANYTHING, ie leave it blank! Otherwise, you will not be able to connect FOREVER, FOREVER! If you don't think so, try this and that!

    I haven't had time to go through all the tutorials on this site, but if there isn't a tutorial for setting up a router for Romtelecom and you want to do one, then for the situation when their modem is set according to " BRIDGE ”, the same is true for Romtelecom: at“ SERVICE NAME ”DO NOT ENTER ANYTHING, leave the field free! This was not even known to Romtelecom!

  63. @xavier:
    You're right with RDS should not put anything in the service name, I made this set because I somewhat blindly net of RDS is good for you come with some adjustments to correct errors or omissions in the tutorials.
    When setting the romtelecom not have been anything anywhere, you set the router to dynamic IP, enter the IP can also be those of tutorial sites if there are some errors in the network and the connection fails (rarely need to be swept ).
    Thank you for completing Stop waiting for us.

  64. Where can I find a tutorial which shows me creating a sait

  65. @tudor: Ohoo if you knew how many tutorials there are on this topic !!! Write brother in the search at the top right of the site how to make a site… NO ONE REALLY SEES THAT SEARCH ENGINE ON OUR TOP SITE ON THE RIGHT ????????????????

  66. WHERE TO FIND DRIVERS FOR WINDOWS XP Asus PRO72SL-7S055?

  67. @George: You need to look on the manufacturer's website, go to their website http://www.asus.com —Asus global site – support – download – at general download, please select the product, there you choose the product, series, model.

  68. ASUS laptop Windows XP drivers PRO72SL-7S055. I can help, I have the same model of laptop, I have all the drivers, except the pt. firewire (1394). It is true that BL's advice is absolutely correct, but the site of the ASUS is well known for slowness with which it moves. Contact me on messenger [email protected] or give me an email and help.

  69. Congratulations CRISTI! Congratulations to your colleagues for these tutorials, which help some a lot. I don't care what all the illiterate people say on this forum: they have the impression that they are in scandal scandal newspapers, not in technical information. Don't be discouraged, keep going! I was very impressed by your conception of life:
    "Do what you like, good people, if you don't do something with pleasure it will never go well.
    The most important thing in life is to be happy, not rich.
    If you do what you love and know that you'll earn big money.
    When you do something for financial gain alone, you will never be tall, you will be a mediocre person with money all your life. ”
    Much continued success!

  70. Shloim said

    Hello, We Black Box economic wireles router which in my case I set it to my 192.168.1.254.Problema can not access the router unless I put an IP in the same class, say 192.168.1.15.As like if you know me explain how to set my router on my address normal, which is fixed in another class, namely 195.16.xx.xx?
    I need this because my English shines through absence and I would translate online do not understand, but that's not possible because if I put IP 192.168.1.15, I have net access only to router settings page.
    Mention because I do not want to give up this class of IP that I have because I upload pretty good, with the state and 1,2 8 to Bucharest, so necessarily I need from my class to access the router if the anticipated ul.Multumesc enlighten me!

  71. relaxattul said

    Even out your tutorialel I looked for about an hour on the site
    and the wireless router's settings with really useful
    What do you look bro by this country
    learn English and go to make real money off brother
    Respectfully "I"

  72. IT SHOULD BE SPECIFIED THAT FOR THE RDS CONNECTION, NOTHING IS PASSED TO THE "SERVICE NAME" FIELD, BECAUSE IT WILL NOT WORK. SO THE HOUSE WILL BE LEFT FREE.

  73. Hello

    Brethren, I made the mistake of having an asus pro72sl laptop ,, and I can't find those xp drivers. suggestion …………… thank you very much ………… ..

  74. @IONUT: It is a general problem, almost all notebook manufacturers withdrew their support for Windows XP on their websites just find some drivers for xp at all.
    This is a deliberate action to cause the world to go to vista and windows 7 future.
    If you want to search drivers have to go to device manufacturers sites, eg Realtek, Atheros, Intel, Marvel, etc..
    And this partial method is not good for man how do you know what model sound card or what exactly is wireless PC's.
    I advise you to stay up to vista because that way you get away with nerves on end.
    Vista has matured, even in this time launched 2 for vista service pack that gives it stability and speed work best with the resources consumed things have stayed the same.
    I advise you to give the aero interface of Vista (if I use this OS) for AERO is responsible consumption of resources.
    We will also do a tutorial on the methods of "easing" this operating system so blamed.
    If set correctly windows vista can move very well.

  75. "Radu" how did you manage to connect with him? (wireless router tp-link TL-WR641G) or anyone else if you know. I made all the settings correctly, but I can't go online. Thank you !

  76. MANDATORY said

    Only for those who have Windows XP SP2 not SP3:

    When securing the Wireless connection of any router, with the highest level of security, WPA2-PSK TKIP, Windows XP with SP2 cannot interact on Wireless with that router if you do not add to the windows a necessary patch for this security! That patch is called "Windows XP WPA2 Hot Fix KB893357" and you can find it at: http://www.pcworld.com/downloads/file/fid,30721-order,1-page,1-c,allinternetdownloads/description.htmlOr on Microsoft's site, only here you will check Windows XP.

  77. Uncle Crsiti, your effort is commendable to do this tutorial, but you should still matale you better prepare them ahead of time, and not all crazy and walk about blame or network stuff. Other colleagues of yours, still have more respect for what they do.

  78. @Bula: Thanks for the suggestion !! And we invite you to do a tutorial to see how "simple" it is !!!

  79. Yes, I was sure we'd get such a response. But it does not hurt there, write down some ideas on a sheet of paper. It is commendable that you do, but that does not mean there's no room for improvement.

  80. Adrian returns initially thought're part of the group that publishes tutorials, but reading the above comments, I see not. You're the one, that if one cares about you, do it yourself. In general I see you cutting of crap.

  81. Adrian said

    @Bula: Look better on the site to see that I have tutorials… I was hurt by your comment… you have known this site for a few days, I since it was founded, but some do not understand the fact that we who do tutorials are still people, and want everything on " plateau ”eventually to go to their home to move their mouse under their careful instructions… not to mention the convenience of people, and the laziness that many of you show, we better watch porn than read some text or I was watching a tutorial right? Yes ... maybe are "damn" and more boldly, for that again, we are all people, and how we can can and others !!! Already when you are lazy to read and look at a head-to-tail tutorial in which it was clearly specified what needs to be done is no longer our fault, but your eyes, sharks or brain have a problem and it is harder to assimilate… so… train- you, read a book… and leave the page on page 5

  82. Adrian said

    @Adrian: and please, next time, refrain and stop talking ignorantly, you have an advice, a suggestion we listen to you, we do not criticize personality here, let's keep space for those who need help say it all 😉 (I hope you realized that the phrase "I was hurt by your comment" was ironic !!)

  83. Catalin said

    and one more thing: For the RDS provider at Username enter GL (or resp city) in lower case !!! VALID ONLY ON EDIMAX ROUTES (2 days I discovered this alone to be successful for what they removed white hair); another variable would have decreased 100 to MTU ex: 1300 (1400 Default).

  84. Adriene, you should do a little tutorial to explain what you mean roamana language that you Really serious deficiencies in speech and grammar is great mourning. Yes please tell me what you hatched tutorial you here, I really want to have fun and to hear what you charge. Instead of watching a funny movie, I'll listen to you.

  85. @Bula: Here we learn and "research" IT, if you want to analyze grammar I invite you to go to cultural blogs, or other sites related to the Romanian language of culture and the grammar of the Romanian language !! If only my Romanian is the problem, then it means it's good, and you didn't have to take anything else, because you're "too smart" so you took my Romanian too !!! Talking to you becomes useless and I will put an end to it here! since you answered my comments it means that my grammar is not so bad and you understood perfectly what I meant;), it is important to make yourself understood, and I succeeded, I also received an answer from you like that that…

  86. I is sincerely sorry for you, and your only neuron that you seriously afflicted, to write a few lines. Give notice, using a new term, RESEARCH, May Adriene, see you not tired lonely neuron. There is no connection between your bullshit and research, so do not use words that you do not know.

  87. @Bula: I put the word RESEARCH in quotation marks, open your eyes harder, as if you knew Romanian… learn what attributions give quotation marks to a word and we'll talk more…

  88. @Bula: Do not know what you want or what we here in comentariila that you leave this site shows that you do not need anything from here.
    You are very arrogant and made only CEOS, see that you are full of frustrations, we are not to blame for your situation.
    If you have specific requests or suggestions, we're listening, please be a little more seriously, cut the crap and get decent behavior, this is not behind the building or shed with beer in one hand and the other seeds.
    Please respect the visitors, if you feel like making fun of someone I am at your disposal "[email protected]".
    Let's keep the comments box clean, if someone comes in here in a week can not learn anything from your comment in conclusion are useless, and you make yourself useful.
    As you can see I've approved all the comments though, the first was ironic at me, I'm not a communist, not an idiot.
    Romania is full of d-mistocara guys, unfortunately in Romania do not have smart people to do something.
    From your confrontation with Adrian had nobody won, you think you did, you're wrong, he was the smartest guy on that one, after a few months you should be abolished with all long comment, enter While Adrian has matured and you replied in a neutral tone.

  89. francine said

    I searched for your router tutorials because I got some specific viruses, "vectra scan" and "tcp fin scan". antiviruses don't really see them. how do i get rid of them? they have already restricted my access to settings.

  90. @francine: Reinstall windows, if you don't know how, we also have a tutorial about this, write up the search on the right: "install windows xp sp3" enter enter and you will find the tutorial

  91. NOT neccessary said

    Mr. Cristi-admin, I don't know what the problem is between the two: Adrian and Bula but one thing I know for sure: that there are a large majority of the tutorials on your site in which this Adrian, who although not part of the site team of yours, benefits from a sustained moral support from you, despite the fact that this Adrian (the pianist, as he likes to display) constantly has an execrable naughty attitude, with a brave manelist …… ..! Maybe you could tell us, Mr. Cristi-admin, what would be the reason why this Adrian is so supported in your graces, that you support him so much whenever he enters, because of the language and the anagratism his stubbornness, in controversy with practically anyone ?!

  92. @NOT neccessaryAdrian is an old visitor on this site, when he first came here helped many visitors, it has 2220 comments, of course all these comments are some who does not drink.
    Indeed sometimes surpasses the limit, can say things that would never be said in public.
    Adrian has not found favor anyone, is responsible for his actions.
    Adrian is not a part of the administration of this website.
    Nobody benefits from any preferential treatment from us, the management, whenever there were conflicts I tried to mediate them, in the case of "Bula" I have nothing to comment because he did not like anything he saw on here, I know that when you dislike something, you avoid doing it.
    We are running this website free men in thought and I never censored anyone, than when it was violated any rule of common sense, always try to be impartial when channeling some small conflicts can not always and that we apologize.
    Anyone on this site can be an "Adrian", as long as they keep a certain limit given by the seven years at home.

  93. @NOT neccessary: What would you like to do or do you? We swear we porcaiti mistocara us to be arrogant lazy careless comfortable and we say thank you we swear?? Work these people work here, and if you come and put your feet in their work and I swear, I get the cool, aber commenting like that is not right And you can not kite you and to thank you for this! ! Yes, we appreciate the advice a suggestion, not a criticism but diplomatic arrogance and cheek irony! these people leave their family, baby that do tutorials and learn the world and you get? irony, bullshit, complaints?? No thank you very much we do not need it, it's as simple as that, do not like do not look man, go to another site, but no offspring, no taunt, do not be rude!

  94. @NOT neccessary: actually you know what I think? I leave you with the same name as a proxy Bula and other nick name

  95. Adrian said

    @NOT neccessary: if you put this ironic label with (Adrian, pianist as he likes to be displayed, with the attitude of a manelist) it is clear that you are one of the narrow-minded people who label without thinking and for them all musicians are gypsies… in short, no I make the theory of life with you, know before you judge !!! musician does not mean gypsy or manelite, Ludwig van Beethoven was not a manelist and he also plays the piano !!! only a man with limited IQ and narrow horizons labels someone as a manelist if he has connections to the piano or loves a musical instrument !!!

  96. francine said

    darling, I have one more question! if I set the encryption for wep and wpa, I can no longer make the wireless connection! don't I have to have this thing, protocol or what is set somewhere? (sorry for not knowing the terms, I'm a chemist, but I need a lot of computer work) I have this router - barricade has been called for about 3 years, and I used it with unencrypted connection with minimal settings - ip and password from rds - made at startup with cd. I can only make the settings in the browser for a short time.

  97. NOT neccessary said

    Cristi-admin @

    If I asked you such a question, it wasn't just rhetoric! It means that you really benefit from your partisanship. So, I did it to see if it has 2220 comments (how many decent ones will be among the 2220 ?!) has the right to have such a language that a lot of decent users on this site can not swallow (I have no doubt that there are a larger number, but who did not dare to take a stand against him)! The very motivation with which you come, with reference to the "n" comments on this site, does nothing but show the partisanship it enjoys from you. Because I just want to give an example - as you did - if the controversy with "Bula" had some subjectivism, then maybe you can tell me what it has to do with "fable" (which I do not know, honestly , but which one did he admonish in his characteristic style ?!

    I'm sorry to say all this, because I don't see what the big loss would be if you warned him to stop using such language, after which, at the first relapse, you forbid him at least limited access to the site ?! YOU, you are not of his kind and you do not "taste" such behavior and language, after all, with your clients, and in no case his (you, who have worked so hard for what is now) " videotutorial.ro "! THIS and no other is the step to be taken with the kind of maladaptive, irritated and irritating people like him!
    If he benefited from the possibility of posting certain (I repeat, a few decent) tutorials, he could do it because of your clemency, but in no case his way of being and even less so your affiliation to such behavior. He does nothing but use this site to "growl" every time he does NOT like something PERSONALLY, to throw all sorts of invectives at those ignorant and beginners for whom and to whom this address is actually addressed. site and, ENOUGH enough, in a grammar that he justifies and puts it in balance with his "high" level of IT knowledge, minimizing with this motivation, anyone who dares to comment! It cannot continue indefinitely and, in my opinion, it is a matter of time until, for one reason or another, it is removed from the list of users of this site.

    Personally, I will NEVER address him, because I can not go down to the level of this type of individuals, but honestly and as objectively as possible, studying closely several dialogues with some of the other decent users on this site, I I address you to take a firm stance not only against him, but on all those with a general behavior like his. It is neither the "salt" nor the "pepper" of this site and therefore no one will be able to call it "the great loss for the good of this site"! On the contrary, his absence will surely bring greater coherence in the comments posted following your hard work, so appreciated by everyone else!

  98. NOT neccessary said

    Thank you very much Mr. Cristi-admin, for the much proclaimed freedom on this site! Long live the "videotutorial.ro" censorship!

    I did not expect you can not stand the harsh reality, censuring my criticism goals!

  99. @Cristi-admin: Hi Cristi, and even speaking of arrogance, is what characterizes you. I was well-intentioned, and I suggested that it would not hurt before making your tutorial to make some small notes, and not rely on the inspiration of the moment, sometimes betray anyone. Your tutorials are good, but it would be very good. Recunopsc And frankly, as a result I have saved them many personal efforts.
    Mon Adreian, I am allowed to give her nose because it's naughty, and as a stray, if someone spreads a piece of bread barking anyone.
    I followed the tutorial best rated, Sharing, and saw that you made an error in your assumption heads and platters, otherwise your error has been reported by many who have watched your tutorial. If you did not conceited, giving a correction, and you did not let those who have trusted you to count platters and heads, by the way, one that Adreian, is able to remove with a screwdriver and chisel and HDD Acronis does not follow either it can help to make the toy back.
    If my proposals irritate you please excuse me. Make these tutorials assume you take long, and I think you're busy, often heard in the background little girl, who rush to finish them and I suppose he does not understand, why do not you attend to it.

  100. @Adrian: It seems as though, you're not really that smart to figure out, you know that it is NOT neccessary BULA. Notes, however, that lately and spelling mistakes make serious efforts were also rare.
    Adreiene now on weekends I have more free time, tell me what you did tutorials, NITEL want to have fun, and do not have money to go to the sea or mountains, so what a delight me you did.

  101. @NOT neccessary: Unfortunately, Mr. "no name" neither you nor others and I am not customers of this site! Client and visitor are 2 totally different terms, therefore a client benefits from some services and gives something in return and has the right to ask for more, better services, because he paid he gave money and it is his right, but unfortunately not you are just a visitor like me and the rest !!! In order to ask for something and to have pretensions, you must also offer something, or you have intervened and commented twice in an aberrant way on this site, and you have no right to ask for anything but to suggest something to do. a proposal to give some ideas not to ask !!! Why doesn't someone else do what I do ??? How many of the visitors of this site intervene in the comments to offer help ??? Although there are many with "calm" and "diplomatic" vocabulary like yours, no one does, It's a word… after the war many heroes show up, we all complain but no one gets to work, no one helps, everyone no one says their problem and not even a thank you says no one (with a few exceptions) You all "know" and can not stand to be overtaken by anyone but none of you "skilled" do anything, and does not help this site , through comments that will help others, but you know how to come with pretensions and that's it !!!

  102. @NOT neccessary:
    Do you censor only one I have not had time to approve comments
    Adrian was warned for language and way of addressing vizaivii by other visitors and I can say that lately changed its attitude and hope began to grow.
    This site has two administrators discretion (and Pelu Cismaru Cristian Bogdan) and keep and appreciate every visitor.
    Unfortunately for some, we can not overlook this site work that he had Adrian challenged and appreciated equally.
    I do not think I would need to prohibit access to this site just do not approve of the some visitors and I think would need to leave aside all malice, and to focus more on tutorials
    An administrator should not have any sympathies or antipathies and I think we can not be accused of this because even a user has been banned for speaking only ugly comments have been deleted and were banned people were because they download at tutorials
    Please kindly let's not unnecessarily fill these fields for comments and talk just about IT

    • NOT neccessary said

      As I said: "the absence of [this Adrian] will certainly bring greater coherence in the comments posted following your hard work, so appreciated by everyone else!"

      I mean, not a single moment I mentioned the fact that Adrian is sympathetic or antipathetic to certain users! What I said was plain hard simpler: to be taken much more obvious language and his attitude! His contribution to the image of this site has nothing to do with the home 7 years, whose absence is so little evidence!

      And, a request, Cristi: tell your "protegee" that I also have some beneficial interventions, on your site, even explicit tutorials (I won't tell you more!) - by virtue of anonymity and freedom choosing a username and not the real name, posted under another username and another eml address, to which, advanced as you are, you did not notice and mention, respectively, without which, you notice, all those tutorials would not be showered nowhere. Believe me, I know what I'm saying!

      • Proves that hide everything but a man leave Vile and use something like this, a man with dignity, as who really has something to say he will not ever hide the identity, but the fact that you show and prove tot.Un man facuto worthy will not ever hide anything, especially as she has only posted a comment and did not commit any act or a crime ever! Anonymity is applicable only if you put your safety is if you apply in other cases it means that you're a liar

      • Cristi-admin said

        To know that we know about the people who visit this website, we know quite a lot about each one, this is not important, but it is "mandatory" for the proper conduct of activities on this server.
        Even if the man doesn't give us his real e-mail address, it doesn't bother us, it's about everyone's "backbone".
        You had some very interesting few even thanked you in behalf of all.
        I do not know what to talk both about Adrian or the X-ulescu believe that discussion is not profitable as a single person.
        Believe me, I have so much exciting work every day we think not only Adrian us.
        The main subject of the site must remain videotutorial.ro tutorials and articles, personal repercussions not have to pay so much attention.
        I do not know why you keep saying that Adrian's protégé, if you say that 2 months ago would have another value, now this statement is without foundation.
        I NEVER got his defense in a confrontation ADRIAN WITH ANOTHER visited the contrary, I even had arguing with him many times.
        We try to be impartial in how it can arise when a question is perhaps not always, we are not perfect.

        • NOT neccessary said

          Communicate them you please, Adrian anonymity has other connotations as the one who knows he has nothing to do with his references.

          Thanks again for the answer, I consider "Adrian" the finished topic!

          • Late… I already know who you are !!! Shame on you, for me you are a man without a spine and without verticality!

  103. How to setup a router on the network ilink? It would be of great help to compliment site

  104. andreieicho557 said

    Hi, guys I have a netgear router lan rp614 and do not know him I montez.specific wireless internet through modem.ma can not help?

  105. @

    andreieicho557: Hi, guys I have a netgear router lan rp614 and do not know him I montez.specific wireless internet through modem.ma can not help?

    First of all… the net cable that comes to you from the provider in the wan port. Then from the lan1 port you pull a cable to the pc. after, you open a browser page and in the router's manual it writes to you on which address it connects, it usually has the shape http://192.168.xxx.xxx. After you have entered, you go to setup, and there you choose the WAN connection type depending on the connection mode, PPPoE, automatic, modem, dsl. After you have chosen it set to share the connection. So much. Return and you in more detail what type of connection you have, the name of the provider, internet solution.

  106. andreieicho557 said

    I honestly do not know how to tell you.

    PS if you are in Bucharest you can you could you do to me? Contrcost course

  107. andreieicho557: I honestly do not get to you if you're in Bucharest spun.PS can you could you do it to me? Contrcost course

    Dude I don't understand you why does your father buy you such toys if you have no idea what that toy does, how is it set up… ??? to what?

  108. andreieicho557 said

    lam friend took moca.si culmmea I needed. answer the question so that I've put o.asta if you

  109. Hi I've got a Siemens Gigaset SE 361 router and do not know where to put gates to the torrent that I block certain addresses in the torrent and the download speed is lower at.Ce can I do?

  110. Cristian LUNCAN said

    Hello,

    I have a Trendnet router and forgot the password to it. How do I retrieve.
    Thank you so much.

  111. Cristian LUNCANHi, I have a Trendnet router and forgot the password to it. How do I retrieve.
    Thank you so much.

    It matters less what the company is the router that you use
    If you forgot the password to see the back router has a reset button
    The router must be plugged into the wall with a toothpick or needle down about 10 you must press the reset sec
    After you reset the router 192.168.10.1 written questions (this is the address from trendnet think) and the password admin, admin username, and then set it as you want
    tu
    good luck

  112. Cristian LUNCAN said

    Thank you very much. I reset and now works very fine. Note 10 for tutorials.
    Regards.

  113. Hi, I also have a question, maybe someone can help me too:) I have a net trend rotator tew-432brp, I install it and when I open the explorer I put those settings with 192.168 etc… it doesn't work anymore, what should I do? to go in because I'm a little tormented with him or I'll throw him out the window:) ms ..

  114. Hello
    I live in Italy and have a net pretty good but a little expensive I think, 60 pay per month and I want to share that amount with neighbor meu.AS SAD I COULD NET YOU USING currently? dak ie buy a router I set it as you say here I have a chance to go, as I'd like to buy it degeaba.Si in case of fail i will eat my bandwidth?

  115. shine: Hello
    I live in Italy and have a net pretty good but a little expensive I think, 60 pay per month and I want to share that amount with neighbor meu.AS SAD I COULD NET YOU USING currently? dak ie buy a router I set it as you say here I have a chance to go, as I'd like to buy it degeaba.Si in case of fail i will eat my bandwidth?

    Hi Luci! If you and your neighbor do not exceed 90 m distance from each other, is not concrete walls with steel reinforcement (no signal propagates well) and both computers to be equipped with Wireless net you can give the following program Virtual Access Point 2.2.Through this program you will become access point (AP) allowing connection Unia or more clients.
    Wireless equipment work usually in two ways: AP (access point) and client. With their original antennas, go between 90m (indoor) and 500 m (outdoor). AP can connect to one or more clients.
    Virtual Access Point is a simple software that turns the laptop connected to the Internet or a Wi-Fi reference point; wireless access. So anyone nearby can surf the Internet through your. A great idea bill reduced internet.
    Click here ... Click here .
    I have tried you have another method to relieve you of some euro spent.ATTENTION! This method is valid only if two computers are equipped with wireless.Unul give another take.

  116. Hello!

    I have a little problem and I if I can help! Have a friend who has the RDS net via wireless router (not sure what model), the problem is the following:
    He has 2 laptops and a comp (all 3 system running on wireless) Who did not put the router setup password and the net of him who vrea.Eu for example if I set her password as shown by crystal tutorial to walk somehow a setting somewhere to do exactly that to connect to the net, that if she set my router password you want to connect to the net for example on a laptop or all 3 the same time, it connects automatically asks a password or what? do not understand that!
    Waiting for an email response the SAR could be perfect!

    Thank you

    • ADL: Hello, I have a little problem and I if I can help! Have a friend who has the RDS net via wireless router (not sure what model), the problem is: he has 2 and a comp laptops (all running on 3 wireless system) Who did not put the router setup password and the net of him who vrea.Eu for example if I set her password as shown by crystal tutorial to walk somewhere somehow do any specific setting to connect the net, that if she set my router password you want to connect to the net for example on a laptop or all 3 the same time, it connects automatically asks for a password or something? do not understand that! wait for response if could jump an email would be perfect! Thanks  (Cite me)

      He can not anyone help me??

      • ADL:
        He can not anyone help me??  

        although if you set now password to the router, you might like the 2 PCs + 1 laptop when it connects to no longer ask password when connected first time to tick an option to automatically connect and no longer requires password only if when connecting then disconnects when looking to give wireless network and want to connect then yes will ask password, and others who connect for the first time will require the password to connect

  117. constantin said

    hello, I have a big problem with the internet neighborhood (is from MITNET). want to connect through a router and laptop 432BRP.Cind Trendnet router and want to set to get the address 192.168.10.1, are not allowed (access denaid) . because the provider is not accepting mount my router?

    • constantinHi, I have a big problem with the internet neighborhood (is from MITNET). Vreausa and laptop connect via a router Trendnet 432BRP.Cind want to set the router and enter the address 192.168.10.1, are not allowed (access denaid) . because the provider is not accepting mount my router?  

      You need to set the settings on your network card to "Automatic", if it does not work, you must make the following settings on the network card:
      ip adress: 192.168.10.101
      subnet: 255.255.255.0
      Gateway 192.168.10.1

      dns1: 192.168.10.1
      dns2: no need

      After that you enter the address 192.168.10.1 in the browser's address bar and press enter, at the time of login you have to enter the username and password, usually these are: user "admin" and password: "admin", the password can be "trendnet" or "123456"
      Do not forget the mac cloning site.

  118. constantin said

    I tried in "Automatic" mode and with the settings sent above and in vain. I get the ad "401 Unauthorized" (your client does not have permission to get URL / from this server. There is another solution (besides giving phone ISP)?

  119. Hi, I have a problema.Nu goes my wireless connection and no settings not know and frankly I would not know. If you can help me please tell me the steps CCAR have to scroll through them to solve problema.Mie I look connected but not working. Thanks a lot

    • constantin said

      Violeta: Hi, I have a problema.Nu goes my wireless connection and no settings not know and frankly I would not know. If you can help me to tell me CCAR rogpasiipe you must scroll through them to solve my problema.Mie show connected but not working. Thanks a lot  

      Follow the tutorial very attentive to details, the computer connects to the router, then connect the router to clone mac network.If not make a misstep let provider.

  120. I have a problem! when I do a firmware upgrade ate I put the .bin file and it says that it has a size error ..: - ?? .. who knows what the problem is to help me !! please

  121. I have a question .. how secure my wirless router (TEW-652brp)? (Mention ppot not see the tutorial!)

  122. Hello,

    I have a TP-Link wireless router WR541G and fail to enter the menu (I have Windows 7), that's Ip acela.Nu can understand why not go for this router I had went somewhere else where very good (Windows XP). It may be from Windows???
    Thank you.

    • AlexHi, I have a TP-Link wireless router WR541G and fail to enter the menu (I have Windows 7), that's Ip acela.Nu can understand why not go for this router I had elsewhere which went very well (Windows XP). It may be from Windows???
      Thank you.  

      Disable the Firewall and try again, I recommend you to turn off Windows Defender, I showed you how to do all this in a video tutorial. Write up in the box "search on videotutorial.ro…" on the right: install and optimize windows vista da enter and you will find the tutorial. The settings and everything I showed in that tutorial also apply to Windows 7

  123. I gave mers.Cred reset the router and change your IP as their one and why not mergea.Multumesc much for response.

  124. I have a problem. My internet comes from a network of neighborhood. ISP restricts 1 welcome package. How can I increase or bypass or 2 TTL for connecting computers via router. We tested the DIR-2 825 D_Link routers and Belkin N + that I can not access the internet. I have an old ASUS G but only that I can have access. What can I do to use and one of the 2 routers?

  125. adytzul89 said

    Cristi Hello :) I have a question, when you set settings for net neighborhood with 89..si mac ip and DNS sites etc., to manage the router is usually in your case 192.168.10.1 http://ip-ul that you have to manage the router? I'm right, right? But how can I disable this thing? I do not really like to write ip agree that I have the provider, maybe get others, though we put a different username and password but ..

    • adytzul89 said

      adytzul89Hi Cristi, I have a question, when you set net neighborhood settings with 89 ip .. and mac and DNS etc., For managing router is usually 192.168.10.1 in your case but if it says ip 89 website .. you put it on and set the Mac DNS etc. you can write directly in browser http://ip-ul that you have to manage the router? I'm right, right? But how can I disable this thing? I do not really agree to write the ip you got from provider, can we also have others, though I put a different username and password but .. something can be done? expect a reply | Happy Holidays |   

      who can help me with this 🙁 .. how can i vote for this tutorial or if someone can help me .. 🙁…

  126. TRENDnet TEW-432BRP has that thing with cloning poppy? You can set the same?

    • constantin said

      DDC: TRENDnet TEW-432BRP has that thing with cloning poppy? You can set the same?  

      Yes, I have done this type of router cloning harder but I did, I took a listen carefully empirically tutorial

  127. Hi, I have a wireless router TEW-432brp net Romtelecom I have followed your instructions and it does not work without the modem router only romtelecom (Thomson st516 v6) goes, I tried and wizard from the beginning but that still does not work. Thanks in advance waiting for your email

  128. Hi I have a question for this router net work from UPC

    • kataHi I have a question for this router net work at UPC  

      Any router goes for any net. Googled the role of a router and probably understand that no matter what provider you (from the firm of net)

  129. hello cristi.am WGR614v7.problema NETGEAR router is I have UPC internet and from their cable modem goes directly Addicted calc or a router that has a plastic head size of a lan cable and I at the router where you should enter the WAN connection is lower for both telephone and cable intra.daca not connect internet via the LAN port does not work unless you disable DHCP in the router but when you go Internet only disable a computer and does not solve anything I have a laptop and a desktop.te Please ajutama

  130. Hello, I have a question, are clicknet client and have a Huawei modem SmartAX I want to replace it with a router 585v6 SpeedTach wirelese, ST 585V6 is bought in Spain can use it or not?? Someone You must instead firmwer said that otherwise the net give me (I'm a beginner in terms of job Aast).
    Otherwise 10 note for tutorials learn more

    • mihaiHi, I have a question, are clicknet client and I have a Huawei modem SmartAX I want to replace it with a 585v6 routerSpeedTach wirelese, ST 585V6 is bought in Spain can use it or not?? Someone You must instead firmwer said that otherwise the net give me (I'm a beginner in terms of job Aast). Otherwise 10 note for tutorials learn more  

      I don't know who was the one who advised you, but he certainly doesn't know what he's talking about. You can use it. Why do you prefer to follow the nonsense of others? what do you lose or what happens if you still try to see if it works even if the "professional" told you no ??? Something jumps in the air, something explodes,!?!?!

  131. Rusu Andrei said

    Thank you so much!!

    I've been struggling for 2 days or so, today I spent 4 hours setting up a router, until I came across your site. It all lasted a minute.

    Thank you again! Do a good job!

  132. Although no one can help me!?

  133. I've been struggling for 4 hours with a router and it doesn't connect, firefox gives me the answer: Firefox can't establish a connection to the server at 192.168.2.1.

    HELP

    • constantin said

      AEA: I struggle to 4 hours a router does not connect, firefox gives me the answer: Firefox Can not Establish a connection to the server at 192.168.2.1.HELP  

      First connect the PC to the router (without connecting the router to the cable tomers) Mac clones as in the tutorial, then enter the cable from the router net.

  134. it also has a problem with the on LED that is not on and a connection is not made I think, everywhere it gives me the answer CHECK THE CONNECTIONS…

    Hello,

    It is possible that your router have a technical problem, because normally power LED should light.

    Will also send a setup guide in Romanian http://www.edimax.ro/images/Image/FAQ/Router/Cum_configurez_routerul.pdf But if it still does not work go with him to guarantee the shop where you bought.

    Respectfully,

    Mihai Ciobanu

    _______________________

    Edimax Balkans

    T: + 40 31 425 0127

    T: + 40 31 425 0790

    http://www.edimax.ro

  135. Thank you so much, Cristi, pt. this tutorial! With your help I managed to set my wireless router, although it was a different brand. God give you health tutorials to doing so that I (we) help tremendously!

  136. hello! congratulations to you who have so much patience and willingness to share and those less skilled in the IT community, your knowledge. will follow a year or so and I can say that I learned enough yet to bother me any 2 nights to make a network between two sites and two laptop desktop sites and not actual reusesc.mai: I Romtelecom's net modem and Hawea mt882 ASUS Wireless Router RT-g32.net we all like this: PC (desktop) directly from the USB modem, the other PC on the router (which it was normal to be connected all the modem jack enthernet) and s laptop wireless.as network administration wants to do on a laptop.precizez as we all ZoneAlarm firewall, your router's firewall and I think your modem (not sure).'ve tried with all firewalls disabled sites ( removed) and still have not got it. and another thing on your pc net modem I sp3 the other pc runs xp ultimate win7 x32 win vista ultimate on a laptop and the other win32 ultimate x7 x64.ajutati please me with some guidelines if you can, please play! Thank you!

  137. Sall
    I have a question!
    eg say: we go somewhere in the country and take our laptop (or have a pc) and we Roter wirles to us and we want to connect to the Internet at network wirles May accu
    what should we do?
    How are we doing?

  138. MUST BE public network FREE

  139. the address above does not work and I tried many variations.

  140. byanca16 said

    I sent you a comment. but I want to send another one to thank you… .I greet you Bianca….!

  141. Hello!

    I need some help from you. I had to clicknet internet and looking at your tutorial I was able to configure it exactly k router that you had you made. Wireless struna.Dar I walked the contract expired and I decided to stick to akta.Cu internet these is a problem. When I try to configure my router, I did not succeed. I have two computers and tried to clone and mac address and nimik.Ideea is they gave me a user name and password, as if Rds but I understood that I recorded and poppies on one computer. Please, give me a reply to me. Thanks a lot

  142. Hello,

    Thanks for the hard work you give for this tutorial as others, like me, thanks.
    question: I have a trendy TEW-632BRP (it's for a PC and a laptop) and an rds connection. I followed the tutorial and when I get to work… surprise I can't log in to the address "http://192.168.10.1" with the user and password "admin" and in the book, help, box everything that came with the router I did not find a other password / user… what can I do?
    Please, give me a reply to me with a solution. Thanks a lot

    • Hello,
      Thanks for the hard work you give for this tutorial as others, like me, thanks.
      Question: I have a TEW-632BRP trendent (e for a PC and a laptop) and an RDS connection. I followed the tutorial and when to go to work ... surprise I can not login to the "http://192.168.10.1" with useru and password "admin" and the book, help, box everything came routeru what I have found another password / user ... what can I do?
      Please, give me a reply to me with a solution. Thanks a lot

      I managed to get the phase username and password, I did exactly as said in tutorial but not working

  143. Cochin ovidiu said

    I bought a router wierles Serioux, I configured the RDS works fine but when I got to encrypt mau packard bell laptop with wifi Realtek NIC does not recognize any WEP encryption or no encryption wap nimic.Fara go perfect.Am only managed atat.Am filtering by mac and tried to update the laptop network card was not working after update deloc.Va pretty please if you can help me see the log I try to connect a lot to my router and I read that MAC filtering is water ploaie.Va thanks

  144. After setting the router, the cable between the computer and remove it?

  145. I bought a TP-LINK wireless router, network RDS super.Dar go home now I want to use it at home to work where there is no internet than Romtelecom.Persoana the net is that I want to take 330 ST modem with USB Output . Tell me what I need, something like a plug that has a head at the other USB input and network output, a converter, and if you can. Do not want to invest in ADSL router.

  146. Bravo Cristi… .I thank you from the bottom of my heart
    with your help I managed to configure my router… ..
    thank you once again, and I only wish you SUCCESS in your activity…

  147. Hello I'd like to know if the UPC Addicted optical fiber that make the Net sitar tutorial from Romtelecom automatic cleaver and if for wireless net mean I need wireless USB adapter to your router and if you can connect the adapter or USB to the router wait for response

  148. cristisort said

    salut.folosesc a wirless router (rds) in order to have net 2 computer but encounter a problem: there are many sites that can not open unless you remove the cable from the router and connect it directly to the computer (when open all websites). what should I do? ms

  149. Good. I have a little problem. I have an asus laptop f5n and I have to block a neighbor who has trendnet wireless. She sits on the floor 1 and I to 3. Catch only living connection, but when I go in my room (room next disconnects. Them go do something? Or is it just about signal strength ...?

    • Ratzoiu said

      Good. I have a little problem. I have an asus laptop f5n and I have to block a neighbor who has trendnet wireless. She sits on the floor 1 and I to 3. Catch only living connection, but when I go in my room (room next disconnects. Them go do something? Or is it just about signal strength ...?

      See that there is the option Extended router connection or so, which router increases the power antenna for better reception. Enter the router and see what can be done. I had a Linksys model and by changing the firmware wr54gl factory with DD-WRT, you could increase the power antenna ..

  150. ciobderoua said

    MDEA, the tutorial .. I understand, but when I give to go on http://192.168.0.1/… Asks me: username and password. In the router manual, I did not find such a thing, well k is not who knows what, 2 pages: D! What can I do in this case? Not another, but I have 2 that steals from me and I would like to reassure them. Any ideas?

    • MDEA, the tutorial .. I understand, but when I give to go on http://192.168.0.1/…imi required: username and parola.in router manual, I found something, well k is not much, 2pagini: D, what can I do for that? another, but I 2care steal from me and I want linistesc.Ceva ideas to them?


      You router behind a hole, stick a toothpick in there, pushing for 10 seconds and reset to default settings, then you can log the data manually.

  151. Valentin1968 iasi said

    Please do yourself a wireless modem huawei echolife tutorial 520s (hc520s) from romtelecom.Sunt so many desperate, like me otherwise, that do not go netul on wireless, but only lan.Mentionez the settings are made as in manual.Va thanks.

  152. I also have a question… I have a new laptop with built-in wireless. and a pc that is connected to the net. from home I can connect to the net via wireless. and to the pc where the net speed is 200 but I can take the net and from others with a speed of 1500 and more sometimes. and now recently I went to greece and there I wanted to connect to the net. I had users from whom I can take the net. and when I gave to connect I could not for some it was private but for some it wasn't and I still couldn't connect. or for example if I go to the mall and I want to connect to the net I can't even if it's not private ask for my username and password. how can i please connect please help me.thanks.

  153. Hello everybody!!!!!! I also have a very recent problem whose search I am trying to find, this being: I live in a two-storey house where upstairs I have "placed" a computer in an office and on the ground floor in another office there is a laptop. The computer internet is provided by ClickNet through Romtelecom etc. In addition to the modem received from Romtelecom, I also bought a wireless router to have a net and a laptop on the ground floor. all good and beautiful, the net worked perfectly on aman2 [both on the computer and on the laptop] until yesterday morning I didn't have a net on the laptop because I don't know what happened but with Hp Wireless Assistant I had WLAN: Disabled and Bluetooth: Disabled . I want to mention the fact that the computer hasn't been working for about 3 months and my hope was the laptop now referring to the net.

  154. Doesn't anyone help me? I wrote above what the problem is esc thank you

  155. Botean I do not really understand the question of what you say but I think that you can connect but can not get because they have filtering by MAC Address.

  156. Hi guys
    I decided to buy a router for laptop and I thought to choose the next model: TRENDnet TEW-432BRP.Ce opinion about him. Is it good?

    • cristian said

      Hello,
      you made a very good choice. I also have a similar one and it goes "like oil".
      if you're not careful when setting you up with him. it's great.

  157. T Florentin said

    A lesson for those who ff required a router. I can only thank you for the explanation and my turn to explain to others.

  158. Florin said

    Hello. I have a problem. I have a desktop, a laptop, a Belkin router and a net from RDS. I made the settings, but it doesn't work to connect with both (desktop and laptop) at the same time to the internet. Instead, I can connect in turn, either wirelessly or by cable. When I try to connect with both it says "Error 691: Invalid username and / or password" (or something). I know I'm wrong somewhere, that it should connect itself (without me connecting from the computer / laptop), but I don't know what to do to work. Who knows what it's about to give me some advice because I've been struggling with this problem for a long time and I can't put an end to it. Thank you.

  159. Good. Please can you explain to me me what's diferemta of a Wi-Fi router and a modem that's normal or better. Thank you.

    • Adrian said

      liviu: Hi. Please can you explain to me me what's diferemta of a Wi-Fi router and a modem that's normal or better. Thank you.  

      Look HERE what it means and what a Router HERE si HERE of what it means and what a Modem

  160. gabicristi81 said

    hello! I apologize for that comment, I do not want to bother anyone but I need a little ajutor.Mentionez that are not in the country, went to Cyprus where lucrez.Am ditch went to the net and Miami FC Cyta quite expensive subscription. I stay at home with fellow one can give to the net but the 3 nu.Netul is wirelessly although I put the key and passwords does not connect, shows that it is connected, good speed but he wants to open a thing. I introduced the laptop steering cable but still nothing to fel.Ce should I do? thank

  161. sal Cristi, a question if I add a network Roter neighborhood with default settings is seen by the network administrator router? such are not to be seen with the router is there any possibility? thank

  162. Hi, I accidentally changed the subnet mask on the router and I don't know what to do with it. I see that it doesn't work anymore ... and I haven't read it since 192.168.0.1… Please help me

    • DragosHi I accidentally changed the router and subnet Masku not know what to make them. Seen as not working .. and do not read him in 192.168.0.1 ... Will help me roga  

      You see that somewhere in the back side you have a hole, insert a toothpick and hold down the button (with the router plugged in) for a few seconds… 10 seconds like that… (read the router's manual, there it will write how long to hold the button to reset the router. If you no longer have the manual, you can find it on the official website of the manufacturer in PDF format. Type in google the name of the manufacturer, and on the official website search for products and support or support, the series of your router.)

  163. thank you very much for everything I did and it is very good… .I reconfigured it..it works well..thanks again!

  164. It's a little old tutorial, I do not manage to make it work. I 2 PCs, net of

    clicknet and a Trendnet router. Only now is very different trendnet menu.

    We have so
    - Internet setup
    - Lan setup
    - wireless
    - DHCP settings
    WAN IP setup internet settings appears to me, but that I can choose DHCP instead of

    Fixed IP must choose the channel mode or routed 1577 times 1483MER (routen

    + Modem) and do not know which one so in any case it was the bridge or PPoE

    their modem.
    I tried to stick and DNS manually, I tried everything I could, no

    sansa.Acum can someone tell me what settings I have setup the internet otherwise

    may realize. Most of my Romtelecom will provide technical assistance

    because it's their router. I'm pretty sure it's easy to make but I know

    exactly what to do, can someone help me step by step, thank you very much.

  165. STIMA.After your video tutorial I managed to install the router and the concrete works, although I struggled for a while, but as you say, CRISTI is the only way you can learn, I admit that I started to retire from PC , but now the first thing after I open the laptop, I go to your site and honestly you find everything you want, once again it's a pity that you can't find a sponsor for you, you deserve it..With respect

  166. Hello. Although it does not seem to be a very natural and "orthodox" thing, I ask you if a wireless router can be used as a network card, practically it can get in touch with another wireless router for the internet. The only thing I can think of is that the WAN plug is no longer used, and the connection to the computer should be strictly only by cable.

  167. Hello! I have a queries about my router DI-524 a D_Link.
    I managed to set it, I have net on pc and mobile phone (iphone 3 g). I receive internet from MitNet. On the pc I don't have any problem, although I take the net directly from the router, I get to the torrent to download at 10 Mb and upload somewhere at 5 Mb. What bothers me when connecting the phone with the router (wireless) to download is blocking the wireless after a few mega downloads. I have to restart it to go wireless again. All this time how much wireless is blocked on the pc I have net net My question would be: ARE THE SETTINGS TO FAULT OR IS THE ROUTER DEFECTED ??? I mention that the wireless lock is only for download, for normal browsing on safari or in the appstore it is not blocked.
    Maybe me and comforted me. Thanks a lot!

  168. Thank you for existing!
    Call back to you for help in the following problem:
    I bought a Belkin wireless G router model F5D7234-4-H V5, own a desktop and a laptop with XP W W 7.
    I tried setting up my router but with no positive result, meaning I can not use wireless laptop.
    I have internet at Fiberlink 2 RDS.
    1 wireles laptop sees the network, connects to it but does not have internet.
    2-LED on the modem router flashes red and the internet does not light at all.
    Please help me with more details, I am novice to install the router and both computers have internet!
    Thank you !

    • Adrian admin said

      Gelu: Thank you for existing!
      Call back to you for help in the following problem:
      I bought a Belkin wireless G router model F5D7234-4-H V5, own a desktop and a laptop with XP W W 7.
      I tried setting up my router but with no positive result, meaning I can not use wireless laptop.
      I have internet at Fiberlink 2 RDS.
      1 wireles laptop sees the network, connects to it but does not have internet.
      2-LED on the modem router flashes red and the internet does not light at all.
      Please help me with more details, I am novice to install the router and both computers have internet!
      Thank you !  

      Have you looked at the video tutorial above? Did you play? 've seen head-tail? Are you sure you wired internet? You put the cable directly into the laptop LAN net? you go on the internet so if you connect directly?

  169. Very cool video :)). It's been a while since posting of the video. I found him now. Enjoyable to watch at this time.
    My PROBLEM (when I went to someone to solve wireless) is that, at the PPPoE connection to RDS, where I put the username and password, I still have to write these when connecting the PC or laptop and when I do it just a 'devide 'can connect, the other no longer recognizing the password. What do I do? I can wait for help at [email protected] .
    Thanks.

  170. hello!'ve set everything as in tutorial but still can not go both computers with the router TEW-432 BRP, RDS, fibra.daca introduce first sanctuary net cord and right cables to the other for pc (in 2 of the 4 ) does not work any computer, whether net cord inserted in another sanctuary (ex 2) cables from the router and PC in 1 and 3 go computer is started first, and the other can not and restart gave conecta.I , I set several times (thinking I was wrong) but the 2 reusesc.Mentionez as I installed a PC and Windows XP 7.ma can you help?

    • cristian: Hello!'ve Set everything as in tutorial but still can not go both computers with the router TEW-432 BRP, RDS, fibra.daca introduce first sanctuary net cord and right cables to the other for pc (in 2 of the 4) does not work any computer, whether net cord inserted in another sanctuary (ex 2) cables from the router and PC in 1 and 3 go computer is started first, and the other can not I gave conecta.I restart, I set several times (thinking that I'm wrong) but the 2 reusesc.Mentionez as I installed a PC and Windows XP 7.ma can you help?  

      anyone can help me?

  171. I have a wireless router Serioux, to me does not work if you pass the name retelei.Am packard bell laptop and network card does not recognize any type of criptare.Daca has happened so someone please answer me as they began to enter the Huns on my router.

  172. costel08_78 said

    Good ziua.Daca can to please and make a tutorial, setup wirless router from Huawei hg655b soon romtelecom.de me and I got it and did not give capat.Multumesc

  173. Hi I have a router model "Broadband Router" I made the settings as shown in the tutorial, it works ok netu only on one PC, namely the one that has the same Mac that is in the contract. If I connect with other PCs to the router I can not access the internet even though they are recognized on the network. I think it may be from the router settings although I think I made them pretty ok. I'm waiting for a rasp. if possible by email [email protected] or [email protected] . Thank you for uploaded tutorials on the site, are useful in many situations

  174. Good afternoon. I have a Belkin wireless G router Router model F5D7230-4. I'm ROMTELECOM.
    I tried to set it exactly as you said in the video but it doesn't work. wired internet always works but via wifi it works for 1 minute (or more… varies sometimes) and then it drops. In order to turn on the wifi, it must be unplugged and plugged in again ... and so on. if you can help me please.

  175. Bravo… you are strong thank you very much…

  176. Thank you! Very useful, I had exactly the problem that ziso, keep your wireless network, now it's fine.
    At several explanations

  177. Cristi, I liked your wallpaper!

  178. Thank you! Very useful the video. (How could I downloaded the video?)

    • stefan: Thank you! Very useful the video. (How could I downloaded the video?)  

      You can not take it. It is and will always be online. Logically speaking, what do you need to have it on your computer? What you do with it without net? You needed to learn what you have shown for free, these guys, not to make money he. That is the rule in this site. Day thanks, shut up and swim.

    • Hello I N10 ASUS Wireless Router RT-LX
      How can I be granted with internet and other users .. Only my laptop I can not connect with one another ... how can I solve this problem?

      • AdrianGudus said

        kmOss:
        Hello I N10 ASUS Wireless Router RT-LX
        How can I be granted with internet and other users .. Only my laptop I can not connect with one another ... how can I solve this problem?

        You have to enter the router and disable MAC filtering in the settings for Wireless (Wireless MAC Filtering) you give it Disable but I would not advise you… .I would rather advise you to find out the MAC of the laptop you want to connect to and to add it in the router to the Wireless MAC Filtering section by clicking on the Add New button. To find the MAC of the network card of the laptop you want to connect, open the CMD (Start> All Programs> Accessories> CMD) and type the command: getmac then press the enter key

  179. hello. I did everything you said in the tutorial and I still do not go netul. So I Internet from RDS. What can I do to give him head.

  180. Nelutzzzu said

    I did an upgrade but kept the password to the router and do not know how to recover a router HG520s

  181. Hi, I have a Zyxel router from Romtelecom, the problem is I can not get into his settings, I reset several times, I tried the password on his label, and nothing. What to do?

  182. Hello I have a question .. I watched the tutorial and read some of commenturi not all because there are many .. I wanted to ask if a modem rooter clicknet can be used for wireless net and into another kind RDS network netul enter .. mention that these modem-rooter through a thin cable to the phone and not through a cable internet with a normal socket but has 4 ports LAN.Multumesc!

  183. backspace said

    dak not enter my id p mfi.yrry then show me step by step what are the router settings kre TEW-651BR. I net rds and not going to keep cs server and how to put radio ports and more by just set?? ast a rasp pls.

  184. backspace said

    someone help me?

  185. backspace said

    I see that no one really pays attention to us here. I managed to make my ports on the router for the cs server. but I don't know if the radio doesn't work, I have the IP address on the radio but it doesn't work, does cnv tell me what ports I need for the radio? or what tr faqt?

  186. benea26 said

    but when you roter rum telecom and want to you put one in the net of it is out of him all the settings that I set sal fail
    local network with mac cloning went smoothly

  187. Salut.super tutorialul.pacat hard, but I did not what to do and when I rds client el.sunt cable net pc functioneaza.cand you wan bag in the trendnet 651br, write in browser http://192.168.10.1 requires connection rds.si all ends here, ptr can not conecta.ma can help to understand why?

  188. Thanks 1000 are hard

  189. A video presentation was great.
    I do not have all the IT but I managed to do all the settings.

    Thank you very much!

  190. I have a problem and I hope someone help me.
    I also have a wireless router from T-com w 500v (it is in German) fail to configure it to me .. I head out to the RDS net. please help me.

  191. Hello!
    I bought myself a edup router with USB. I connected the router to the computer via USB, but when I get on that IP is not loading the page. I installed drivers. Any ideas what should I do?

  192. Hello, since I managed to get the router configuration page, after you have connected to the computer, but I got another problem. I net the rds, and receive netul through an Ethernet cable, but do not know where to put the cable into the computer or router. I tried both options but none worked. After you put the ethernet cable from the router in router should carry out a cable to the computer (I suspect it's the USB since the USB cable I managed to get into the router settings) but after writing your username and password rds and not to give me coecteaza Apply. What should I do? We expect the answer

  193. have blocked comments or what?

  194. Hi Cristi! After seeing this tutorial on the jump (on the jump… because I was interested in the configuration for RDS) I managed very easily to have internet through the router. Great joy! and thousands of thanks to Cristi. But I thought why not follow the whole tutorial? I followed him and finding out that I have to change the login password on the router (admin) I went to work. From the moment of changing the password, at any RDS configuration attempt I receive the message: “Wan setting is taking effect. Please click "Continue" button to do other settings, but I can't connect. I brought my router to work where I have a net from romtelecom, but I receive the same message, of course following the step by step settings for romtelecom in your tutorial. I restarted the router from both the back button and the menu, but still nothing. Please tell me where I'm wrong?
    Respectfully,
    George

  195. A problem that has not used one, that I found no answer. I net from a neighborhood fixed IP provider, cable assembly shall enter router, giving a net intro room and wireless port, now what I want from another port to pull one thread to another router in another building to power a PC wired and wireless I and, the thing is that the second generation router fail to make it on the net give any idea I would be a great help.

    • Costel:
      A problem that has not used one, that I found no answer. I net from a neighborhood fixed IP provider, cable assembly shall enter router, giving a net intro room and wireless port, now what I want from another port to pull one thread to another router in another building to power a PC wired and wireless I and, the thing is that the second generation router fail to make it on the net give any idea I would be a great help.

  196. I bought a router ASUS RT-N10LX to make my house a reta .. I did not know what bag you give me admin password anmin not let it intru.tin mind that I put there some passwords but I think I did something really stupid! really do not know what to do spend hours to solve something nimik! I beseech give me a helping hand

    • AdrianGudus said

      andreea:
      I bought a router ASUS RT-N10LX to make my house a reta .. I did not know what bag you give me admin password anmin not let it intru.tin mind that I put there some passwords but I think I did something really stupid! really do not know what to do spend hours to solve something nimik! I beseech give me a helping hand

      Reset the router, you have a reset button, hold down the button with a toothpick for 10 seconds and it will return to the factory settings. Don't read the user manual… ..it's like that… .because they had too much paper in the factory… ..no? 🙂
      I suggest you call someone who knows if you do not know.

  197. hello. You can configure a UPC HG520s for? or just go for Romtelecom? if so, how? ms

  198. how can i put password on each user to a wireless network connection users say 10 router with external antenna

  199. Hello, nice tutorial, I try to put it in a n00b prcactica as they are. Idea: maybe it would be good to have an option to download the video if I do not go netul, it's hard to watch on the site to see the tutorial.

  200. Hey, I know this sounds crazy loud what to ask, but I grind a thought: If you install a new windows on a computer that's connected to the wireless router, it's possible to change my settings and I can not connect to the network then ? (Please note that laptop computers are still connected wirelessly 2)

  201. Marius said

    Problemaaa ...
    when I enter the site 192.168.10.1… submits that the password or name is incorrect.
    can do something to find out the name and password? Please play ajutati'ma

  202. Roland said

    Hi, I have a problem with the installation, I bought a trendnet tew561br. I inserted the net cable in yuan and the cable from the router in lan4, when I write in the browser "http://192.168.10.1" it writes to me that it can't find the page ( I tried google chrome, mozzila and explorer) after I reset it and it still doesn't work. What do I have to do? Thank you in advance

    • Viorel BACIU said

      Hello I have a question if anyone can help me I have a Huawei router 652 AM SERIES AND HOW on his back going into this router THESE SERIES AND HOW TR plan to use the AC adapter TL-WN7200ND instruct DE THIS adapter router Romtelecom SEEN TO KNOW THAT MY NETWORK ADAPTER Romtelecom 90% satisfied with signal

  203. Viorel said

    Hello! I also have a trendnet router, it's just Tew-432brp, I have an Rds network, I tried to configure the router, after I followed all the steps in the router states, at wan… It shows me the error The Dns server isn-t responding… I I also saw a tutorial on the net related to this problem I entered the Control Panel \ Network and Internet \ Network and Sharing Center-trendnet-properties / internet protocol version4 / properties / I changed Dns I didn't leave it automatic as you said and I introduced a dns 208.67,222,222. After I did that I still didn't connect another "bug" The windows can't communicate whit the drivice or resource (primary Dns). I really don't know what to do,…: | I did not receive any Dns from Rds…: | I use Hp625 win7!

  204. florin said

    Hello. I have a question I can not connect to the internet via router to RDS
    I have a trendnet router. TEW-652BRP. Ppp does not connect?
    I watched many tutorials., and still does not work.
    What is the deal with 1492-mtu-1450 1480 does not work?
    Iam asked the people at the RDS, and asked if I mau router from them., And I said Lam.
    They said it does not work / /?
    My question is, go or not go.
    Putetii ajutati.multumesc to bother me

  205. kipris said

    hello! I for advice. configuration routers. Pt. those who have a WPS router with wps is shown to bllocheze site for that unfortunately this is a security bug and can break wifi code enter code no matter what!

  206. Hello I have a question that I try to find them answered. Now let's get to have a wireless router Huawei romtelecom HG520b to nothing, the idea being that now I have the RDS net and I want to ask if I could just use it as a wireless router for RDS.
    Thank you.

  207. AdrianGudus said

    ovidiu:
    Hello I have a question that I try to find them answered. Now let's get to have a wireless router Huawei romtelecom HG520b to nothing, the idea being that now I have the RDS net and I want to ask if I could just use it as a wireless router for RDS.
    Thank you.

    Yes, you can use it without problems

  208. Andreeay said

    I have the same problem as Marius… my router is from UPC… Cisco EPC3925 please help me find the password and nickname… thank you !!!!

    Marius:
    Problemaaa ...
    I walk on site'ul192.168.10.1 ... submit the password or name is incoresct ..
    can do something to find out the name and password? Please play ajutati'ma

  209. hello please tell me what to do… that I have a belkin router that broadcasts wireless yes I can not connect to this wireless network .. tells me that windows was unable to connect to belkin… and not on the phone it works for me..although the router is set well I say… that I went to a service with it ..

  210. Hi all I got a router from TRENDnet `ip bag there in the search bar and I can not open anything, I appreciate your effort very good but I have a question with the` cd from them what? Expect an email with a solution. Thanks in advance!

  211. I HAVE A PROBLEM
    I have two computers and the router have internet connection. Yesterday my internet was disconnected from the computer (I RDS) but go internetul.Si laptop computer will not let me go to configure ruterul.Nustiu what to do?

  212. HOW DO modem, Huawei router that went Romtelecom, function RDS?

  213. AdrianGudus: Yes, you can use it without problems


    I have a modem HUAWEI Echolife HG Romtelecom has 510 without wirless, you can use the router to RCS? How do I do this, if possible?

  214. Super cool this site… .theory we can read anywhere… but practice always kills us… .Explanations are as simple and understandable for everyone as practical… .all seeing tutorials I started to think that everything is so easy that you see me make a programmer… ..how good would it be);))) congratulations for tutorials!

  215. Hello, I have a wireless router romtelecom echo HG520 life, and I want to configure it using a static ip [net have that classic neighborhood], I just can not access the interface, if I set ip / dns in agreement router acts as a switch only in that port adsl wan come not just plug the ethernet, so I guess that means I can configure a router so it can use the ports 4 only as a switch? , I would be interested only can use / enable wifi network router, wait for a reply, thanks in advance

  216. Hello I have a request to you, yesterday I bought a router just like I did it all go very well Satara only when I bag the 2 pc (laptop) I do not go netul cable to laptop But PC Mege. I turned off the laptop's wireless to go my network connection appears in the bar area that little screen but I still do not net. I can use the laptop as the wireless signal does not reach to where I want it and want to use the cable. What could I make them go? Thanks in advance.

  217. Viorel BACIU said

    Viorel BACIU:
    Hello I have a question if anyone can help me I have a Huawei router and I 652 SERIES ON THE BACK OF HOW CAN enter this router with this series TR THEM AND HOW UTILIZEZPE adapter TL-WN7200ND that I may go ON This adapter into the router from Romtelecom SEEN TO KNOW THAT MY NETWORK ADAPTER Romtelecom 90% satisfied with signal

  218. Sal. I have a modem from HUAWEI HG655Bb romtelecom I Pačuta SHOUTcast_ radio station with static ip on the net like that 192.168.1.2 82.128.326 ami give another ip. # # Can not connect anyone outside the radio network you need to do. thanks

  219. Viorel BACIU said

    Hello I have a Router please ajutama from RomtelecomHUWEI MT 882 increase internet issues for free wirelees network hardly anyone uses that connection fail because it connects many mobile phones. Question is: How can restrict or sort or filter these connections so I can remove them from the network can use this evening even mention wireles router I can go in the water Romtelecom passwords but the issuing wireeles can not enter. sent here and help us with pote clip expect a response Thanks. http://youtu.be/7_0HfNT_06c

  220. Viorel BACIU:
    Hello I have a Router please ajutama from RomtelecomHUWEI MT 882 increase internet issue for network wirelees gratuitanu too uses one connection for fall because it connects with mobile multi mobile.intrebarea is: How can restrict or sort or connections filtraaceste so I can get them out of the network can use this evening even mention wireles router I can go in the water at Romtelecom passwords but who can not get wireeles issue. sent here and a clip pote expect us help you Answer Thank you.http://youtu.be/7_0HfNT_06c

    Enter the wireless router and the wireless paroleaza to enter the wireless router must use another IP address. For example modem from Romtelecom 192.168.1.2 probably has 192.168.0.1 wireless router or something. If a conflict should change network address wireless router, I see I used the modem dhcp allocation. You could stop your modem dhcp allocation and use of your wireless router.
    I advise you to use a specialist if you can not make these changes.
    I would do a tutorial on how to do this, unfortunately I do not have net at Romtelecom.

  221. Thanks but I have a question how to find IP address wireles that I have access to him Huawei router IP address I have is 882 192.168.1.1 can find here the Huawei router settings somehow? exists here and not know it. Please just watch the video again Thank you.

  222. Good evening.
    I have a problem. I have a router from TP-Lynk purchased a few months ago. The problem is that I 3 days very weak signal. We were able to connect to the internet from another room. Now I can only room where the router from a distance rather small. Why?

  223. Thank you for this tutorial without you I would not be able to have and I wierless, because even at that lucrezeaza my service provider I do not set good router (I net neighborhood hires all nepriceputii)

  224. florin said

    I have a thomson router tg 585 v7, I installed the CD but it does not go to confidurez, I wrote code in Ruther 192.168.2.159 and not going to go, someone knows what to do? ms

  225. beseech you help me out I have a router from Romtelecom do not know the settings for a server metin I was terrible at everything I tried if you can help please very much respect.

  226. Hello I have a T-Com router speedport W700V anyone can help me how to set it up?
    thank you

  227. Hello, although the tutorial is old, I hope someone will help me too. I have a trendnet router tew 651br the interface is exactly like in the tutorial I did everything as per the book and 4-5 times the steps you show here. My problem is that in the router's interface I enter, the pc sees it wi-fi I see it with any device but it says I don't have a net. that is, at the bottom right icon I have that sign -! yellow and in network connection I have x red on the internet. specific am windows 7 ultimate sp1. and net from romtelecom. if I put the cable directly in the pc it works without any problem or with another router. One more thing, even though it used to work, now the wan LED doesn't light up. I reset it on the router because I got bored in vain I did and repeated many times. same problem

  228. Howdy,
    I have and I really need help with a router Asus RT-N10E blocking my access to certain sites on your computer (eg Yahoo mail). Mention that some sites and others do not go loading at all.

  229. There will also recommend your site to any notified that you are not able to respond to help oamenii.Stiu what to say but you are not forced to take money from the ads that I as a user clicked them and it Your interest me to be multumit.Nu will never get to you in May.

    • It is not that they are not required but that they have no time. Have their privacy. If you would respond to all comments would not time left to make tutorials as we have become accustomed. And I was upset that I sent Adrian a few posts that did not get answered but api I put in place and I realized that I would not be able to do quality tutorials to answer all comments and I still have time to family and friends. I hope you do not mind I did not want to offend you but to show you why they can not respond to all comments.
      Now about your problem. Did the problem occur when purchasing the router or later? If you put the direct net cable in the unit, is the problem still there? See that there are several tutorials on router configuration. You can find them with the "search" box in the upper right. Or you can take a look at the "similar items" section and there is a setting that can help you.

  230. Viorel said

    Hello. I can help me please? the problem is: I am net to network neighborhood and someone gave me a router HUAWEI model Romtelecom HG655b but where it enters the wire net has a slightly smaller socket. My question is if I can find somewhere an adapter or something to my cable net bag and the other end to have a jack to enter the router. And if so to know if you can use it and what settings to do. Thanks, I hope you understand what I have explained above.

  231. Hello ,, installed the UPC network, thanks. I'm interested in how a router Trendnet TEW password 452 BRP

  232. Good evening!
    Could someone help me? I have a Huawei router and I want to set my hg655b the NextGen network. No username and password to connect, it connects to Mac. How to set?

    • Adrian Gudus said

      It was explained in the tutorial if you were a little more careful. Under WAN choose Static IP and fill in the information and data provider to choose Clone MAC MAC section. Router will clone MAC network card of the PC and so the router will have the same MAC as the computer has been connected in the past to provider

  233. marius grosu said

    Hello! I'm sorry I also have a router from romtelecom hg 655b I made all the necessary and possible settings it works perfectly but when I connect with anything else like a laptop phone etc… it doesn't connect what to do

  234. Hi. I got a TP-LINK TL-WR841N router, I tried to install it from the cd but it doesn't work. he gives me: “no network adapter has been found” ………… what to do?

    • Adrian Gudus said

      Write up in the search box on the right: How to make the connection settings RDS and a wireless internet router, press Enter and you'll find a tutorial on your problem more explicit

  235. I have a router with dsl.Functioneaza speedport v w 723 wired internet RCS-RDS?

  236. Hi my name is Marius in Cluj I have a problem miam changed the password to interface routing and Miami password of routing like I could really unlock routing password is admin and want to im put a padlock on wifi not amparola on wifi Kanon mentioned as routing calls from rCS will en help me with some advice thank you.

    • Adrian Gudus said

      You will need to reset it. Find the reset button on the router, hit it with a ballpoint pen, pencil, matchstick and hold it down for 10 seconds (router plugged)
      Attention, all settings and configurations will be lost after a reset. I recommend you to call (it's free) to customer RCS-RDS and ask for assistance on this

Trackbacks

  1. […] Hello, I also have a clear click and amreusit like that https://www.videotutorial.ro/?p=903 Reply With Quote + Reply To […]

Speak Your Mind

*