Hi friends, this video tutorial will show you how to activate AHCI for windows vista ready 7 or install AHCI Advanced Host Controller Interface means, that more advanced management of your hard drive, with the AHCI (Advanced Host Controller Interface) NCQ is enabled and it does not work without AHCI after activation we have a faster hard drive and thus a more lively.
First of all you should find out if your motherboard supports AHCI, most new motherboards average bear it.
Enabling AHCI in the registry is, we change an entry, then you must restart the PC and enter the BIOS to enable AHCI basically the BIOS will change the way host controller works, he is the IDE, we're to choose AHCI.
In the tutorial I show the performance difference between AHCI and non-AHCI, while the ASA score SSD Benchmark to drive without AHCI was 240 to AHCI 370 amounted to an incredible difference I would say the test was done on a OCZ SSD Vertex2 of 60GB.
Managing hard drive with AHCI is more effective in multi tasking is a difference in the crushing and AHCI enabled, unfortunately not everyone can enjoy it, not all motherboards support AHCI.
Enjoy the performance!
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
Enjoy !
VAM legutura asked a question in the past I would prefer microfunu in tutorialu SMAI will kindly answer the question
I told you once, details, details, details!
In other applications you work on? If so in what applications?
Since you have this problem, what microphone you on 3,5 jack or usb?
What hardware do you have?
What drivers did you install?
What operating system do you have?
What sound card do you have?
What is your level of knowledge, beginner, intermediate or advanced?
Since you installed Windows?
Recently you had problems with your malware (viruses, trojans)
You only messenger problem?
You Probation small on another pc?
You've come wizard of messenger?
That means details!
Do not forget that you have the problem, I do not have to pull the tongue! No one is forced to solve your problems, learn to formulate a question here if you want to find an answer!
You can post questions and intreaba.videotutorial.ro, there you will get more answers.
interesting; I really had no idea about that…. I'm waiting for the tutorial with the drivers you were talking about (drivers from microsoft and intel)
Thanks for tutoarial.Sigur that we want such materials related to hardware, their properties, functions and technologies, etc..
hi cristi very good tutorialu tineo so on
It's good that you did higher resolution tutorials, sees much better than before.
Uncle Christ forgot to say that the run write one regret, that to open the Registry Editor.
Not everyone knows that!
Well lest tutorial video is this? You play and you go into another room and listen and not look tutorial? It was clear that in the run box regedit wrote!
Hi. Interesting tutorial, however you had to benchmark an HDD not an SDD as most will start to benchmark the HDD and when it starts to "carry" the HDD :)) and you will notice that the result is not like yours!
The tutorial had to be done "live", that is, with a video camera / where AHCI is activated from the bios, many will enter the bios year and will make another story!
Very useful tutorialu 10 note!
And maybe next year [2011] you will post assembly / benchmark tutorials and much more, something like "" tigerdirect "" // "Motherboards" "
Particularly interesting!
Why do not you tell us how thrift find out if a disc already in operation, supports NCQ, AHCI have ba.
All the best,
Strommy
Everest using which already have tutorial or enter the site your HDD manufacturer's specifications and will write whether or not support NCQ. AHCI should have mobo HDD
Very useful tutorial but it would be interesting how it's done in Windows XP after it was installed in IDE.
In other applications you work on? If so in what applications? Yes I work in other applications such as CamStudio and several programs to capture
Since you have this problem, what microphone you on 3,5 jack or usb? I have this problem since I installed it on jack windowsu microfonu
What hardware do you have?
What drivers did you install? I installed the drivers with Driver.Genius.Pro.9.0.0.189
What operating system do you have? 7 windows x86
What sound card do you have?
What is your level of knowledge, beginner, intermediate or advanced? environment
Since you installed Windows? The aprosimativ one month
Recently you had problems with your malware (viruses, trojans) I had not any problem
You only messenger problem? give only the messenger have problems
You Probation small on another pc? lam microfonu probably give a leptop and desktops 2
You've come wizard of messenger? Am DURING wizard
please help me name comes any ideas I gave dc goes incepund update all drivers with sunetu not have any IEEDI dc mia goes can you help me??
Install official driver, that has a soundcard utility with which you can make best settings.
With Driver Genius drivers install the bundle is not the best way to install.
I couldn't tell you more, a friend of mine said "Must see!", In your case it is very valid.
If problama persists, please post your question with details Retail http://intreaba.videotutorial.ro There you can get more responses from users who were hit by aceeeasi problama.
With all due respect, we're talking about AHCI.
I have those in installation on official after the motherboard cd but still called go go microfonu in CamStudio but the messenger does not work that be the problem?
Look THIS tutorial (click on this word in red)
I want to know how I find out if my motherboard supports AHCI I have a basic MSI intel chipset p43
Stefan, go to control panel, top right (where it says see :) select lowercase (latest below) select the sound, select the microphone properties and move the arrow to the right. View Image http://img840.imageshack.us/img840/3854/46477934.png
Servus I have a problem, I enabled AHCI in the registry but can not find bios find the option to change, why.: D
Because you have not been paying attention to the tutorial.
Because your motherboard or rather the chipset of your motherboard does not support such a thing or because you did not look where you should in the bios. Forget the tutorial head-on without scrolling. You can see that we also have a tutorial about "some brief explanations about the bios" that you can find with the search box on the top right. There it was said where the AHCI is
I want to know how I find out if my motherboard supports AHCI I have a basic MSI p43 intel chipset. Wait for response
Good tutorial, we are still waiting for tutorials on this topic you were talking about! It would be nice to make some more materials on the blog, no matter how small there are, but to be… It seems that lately tutorials are a bit rare! Do you have any problems in "real life" or something like that, if so excuse me!
Hello I have a Mr. Cristi queries actually watched this tutorial are up to date with your tutorials have your site on favorite, I mean my probelma now:
My motherboard supports or rather has AHCI I modified as you said there from the registers, I restarted and I entered the bios and in the bios I changed the AHCI from SATA to my base is on SATA. I want to specify that I have a Western Digital HDD 640Gb 32Mb Cavier Black. Do I have to have an SSD to work with this option? And please want to explain to me exactly where it is set in the bios. I set from the first interface of the bios what the bios look like when you enter there are a lot of Sata and under it it says SATA configuration and there I found it like this: SATAT, RAID, AHCI ,. And I put on AHCI and after that I came out of the bios and it doesn't install anything, it says like please reboting system that message appears as if you don't have Windows installed and you have to install windows, I hope you understand what I'm saying. And I went back to the bios and set it to SATA and it restarted the system. I want to say that I have an Asus M3A78 motherboard.
Tell me please what to do should you install Windows or elsewhere should set it to AHCI BIOS function.
My opinion had made this tutorial with all the steps together, because certainly not call myself are encountering problems, will definitely come mia all kinds of stuff and others.
Now please tell me exactly where I go in the BIOS to do this, as I said if I am thence where I specified I told Mia goes and what comes up saying you have to reinstall Windows.
Please send your very much exactly you. Please help me
Let the God give you good health to you your family and your daughter is tidy
Look at the tutorial head-tail without running. See that we still have a tutorial about "some brief explanations about bios" that you find in the top right search box. There AHCI told where the
Cristi, as we recognize the AHCI on a motherboard? I looked at the details of certain motherboards and I found nothing http://www.gigabyte.com.ro/products/product-page.aspx?pid=3571#sp
If you were trading on the tab and choose Download drivers for Windows XP for example you would have seen that you are offering and thus AHCI driver supports it. You do not have to navigate in a website
For XP can not in this way?
Adrian, here's what I have otouni andvaced;http://img23.imageshack.us/img23/8880/imagine0536.jpg
It means that you do not support AHCI is not clear?
Hello Cristi! I'd like a tutorial on AHCI if I put the IDE installed win going to fool with it but not see the AHCI blue or have a laptop that has only IDE can make its registry as you did and to grow performance? And in relation to RAID / AHCI, I saw that the Intel site a software + driver Intel Matrix Storage Console but improved it called Intel Rapid Storage technlogy that I am now in RAID and you say the difference is very greater between a safe and two identicee HDD in RAID 0. I about IDE + AHCI want to tell me if it works or if it's so handy to do a tutorial on Intel Rapid Storage from Intel and Microsoft to see what the difference is. Think! Have a good day!
Hello! I first want to congratulate you on the great job they do. I 2 2 vertex60 gb ssd put in raid controlled by Intel Rapid Storage. In the benchmark I mean access time, it's not the same, a little higher. Various software utilities for. windows SSD in analyzing results, as currently no defragmentat.Stiu should not defragment SSD is required. What I want to ask is whether the trim work in raid and why those kind software Tuneup say Perfect Disk or SSD require defragmentation? Thank you.
If you have old motherboard on ICH9 without R (Raid) and IDE BIOS has only go if I walk registry to make him go or I get AHCI on a blue?
I do not understand that the motherboard must support AHCI? If the motherboard does not sporta so you can activate the BIOS and AHCI lu father, since you do not have one on the motherboard you think will happen? and even if you have AHCI on the motherboard since it's not enabled in the BIOS again you can activate Windows on AHCI lu fratesu it will not happen. The motherboard must support AHCI and NCQ hard drive. nothing you hard if you have AHCI with NCQ on the motherboard and nothing of AHCI on the motherboard if you have NCQ hard drive. Do not go one without the other. Not understand Romanian people? Why scroll tutorials, why not look head-tail? you really think so asi?
I have an Acer Aspire 5738z and figure out where to call to watch to see if the motherboard is compatible fail to find the acer site issue. Thank the one who can help me
As fce in xp activation AHCI and NCQ default to hard
"Uncle Cristi" thanks again for what you do! keep it up!
for those who ich10 gigabyte motherboard, go to bios INTEGRATED PARIPHERALS year and there find SATA AHCI MODE is the first in the list is the default AHCI disabled and modified escape ready give will ask to save the settings and exit the BIOS, say that I have a GIGABYTE motherboard EP43-DS3L and on-site, no way to support something and when I did a search bios year I was surprised when I saw that I like the setup ceva.bafta note all tinetio 10 so, only better.
for those with ICH 10, enter BIOS INTEGRATED PARIPHERALS year and there find SATA AHCI MODE, the default is disabled, change the AHCI, say I have a GIGABYTE motherboard EP43-DS3L and on-site, I found writing as stand this, and when I am given a surprise search this land, which manufacturers have facuto publica.nota 10, and luck all year setup, only better.
Does this work on XP? I mean I've already installed XP and from what I've seen on xp I think it has to be done from the beginning ica that is since when do you install windows 😕 so in the end to activate this function on xp what should I do … Is it done?
Yes, Adrian asked me not to do anything stupid to pc it's not my pc and daia.Nu's no offense! Bravo to the tutorial note Cristi 10 wait to see the Intel Rapid Storage if something is done, I expect no hurry.
Dear tutorialisti Cristi and Adrian,
Track and are interested about 90% of your tutorials and I must admit that they are of great interest and well done. Observe that the presentation addresses a segm average PC user, so do not bore the advanced tutorials and quite enlightening for the middle class. The large number of comments from some tutorials belong to the fun and careless, or are not accustomed to consult documentation, as they say in the old days, engineering. There is also the category of those who possess knowledge about PC. ECAC intrigues me the contrast between very pedagogical and methodical in how they are made tutorials and how to address the responses to comments, completely devoid of condescension contariu and easy. This reminds me of a former professor of physics at school, which was very well prepared, but feel free teaching and more. Work only with the tips of the class and the rest of them treat jicniri. I would be glad if you think a little more on this issue, or pity for your excellent work!
I was patient to collect some of your answers (true, taken out of context, but still…):
- "You have no idea how to navigate a site"
- “Don't you understand that the motherboard has to support AHCI? If the motherboard does not support something like that, you can also activate AHCI's father from the bios, since you don't have something like that on the motherboard, what do you think will happen? and even if you have AHCI on the motherboard since it is not activated in the BIOS again you can activate it in Windows and on the brother of AHCI that nothing will happen. The motherboard must support AHCI and NCQ hard drive. in vain you have hard drive with NCQ if you do not have AHCI on the motherboard and in vain you have AHCI on the motherboard if you do not have NCQ on hard disk. I don't go without each other. Don't you understand Romanian, good people? Why do you run the tutorials, why not look head-to-tail? Do you really think so? ”
__ ”You play and go to another room and listen, don't you watch the tutorial? It was clear that in the run box it was written regedit! ”
__ "Because you didn't pay attention to the tutorial."
All the best,
Strommy
That teacher doing very well and knew for sure what it does. Fair enough that as long as you raft and do nothing additional to what you teach me not to bother me with you. What I struggle if you do not? for you to explain if you're not interested? what bother me if you're ignorant and you do not do any effort and I expect a miracle to inject your cleverness in that ball of yours?
Lazy people who will not, who are ignorant, who do not read, who are struggling, who will not, deserve the contempt of the world.
I gave what you said but I don't have msahci or ahci in those folders but I went into the bios and I have the option to activate it and I activated it from there …… .now it seems to me that it works better… .has no effect if I have the option in bios and I don't have it in windows… .I use an ordinary xxp without modifications !!! I'm waiting for rasp !!!
Good. Cristi, I did exactly what you said in tutorial but I receive error:
NTLDR is missing
Press Ctrl Alt Del to Restart
Do you know what can I do?
He compared the effort and read what it says on the home page of this website last category. He just posted a tutorial linked 2 days NTLDR. Do not really understand how you get there if you do not read bro? how you are able to get on this site if you did not even bother to read this site. Browse blinds or how to make aterziati on this site?
All respect to arguments but not at school, we are not teachers.
The tutorial should be monitored carefully because the information is highly concentrated.
We do not like to repeat the same things shown in the tutorial.
Who is careful chooses something, who does not…
I do not know how many students are in a school, here come close 10.000 visitors per day, 2-3% of them ask questions in 80% of cases, the answer was in the tutorial, it means loss of time means less time tutorials less.
I know not where to post but did not know where to post. I installed Windows XP on one partition then I made another partition on which I installed Windows 7. After a while I got tired of Windwos 7 I formatted the partition where it was installed and I sterso. The problem is that when u open my computer appears to choose between XP and Windows 7 even if I have Windows 7. How can I remove that?
Click on Start
Click on the Run
in the Run dialog box type: msconfig and give Enter
In the window that appears go Boot tab and delete the table entry for Windows 7
Adrian, here's what appears to me there.
http://i640.photobucket.com/albums/uu130/blackzon3/Image1.png
What should I remove?
And I have something like only is ubuntu and win XP. The problem is that I have a hard 60GB and when I installed ubuntu I spent too much space and now I have enough space in windows for games and stuff windows. You can help me tell me how to delete ubuntu that do not use? Thanks in advance.
Hello Cristi! Congratulations for all the tutorials! I have some questions I enabled AHCI (1 image) On a Gigabyte GA-P35C-DS3R and I go way but I try to set AHCI (2 image) And did not work, blue screen and restart. I 2 2 + hdd sata hdd ide on the 2 7 and I win xp. I did well or be as shown 2? Now these two hdd in bios SATA SCSI I appear. It's ok right?
Hello there I am not msahci cristi nor princely pciide but somehow I have to defend my raid? I went in registry editor and start I have installed windowsu 3.Cand value I selected raid 0 which consists of HDD windowsu sites and keep him on ssd Ahac not to be activated?
Hello videotutorial.M and I have faced a problem with a sata hard 2. I researched on the internet and saw that a SATA hard 2 running on a motherboard like mine that only separation from the other performance is 1 sata port. I tried to jump to other drives and the same (hard drives made by the same company) was not recognized. I managed to do it eventually to recognize raid somewhere I could not give as saying that more use should 1 hard. So I got to go back and HDD stay on ide. I would ask the team to make a nice tutorial on the subject sata compatibilities. Thank you!
For I say that SSDs are worth activate HDD AHCI but no obs for a raise performance, I did a test a HDD:
Active AHCI->
http://img217.imageshack.us/img217/7989/captureklg.jpg
In Active AHCI->
http://img219.imageshack.us/img219/5492/capture2nf.jpg
Bravo Guys, super-tutorial… enlightening! In the time of XP I tried in countless ways to activate AHCI and it didn't let me, in Windows 7 it went like a although I was heartbroken like a flea, for fear that it would fail and in this way, but it didn't work, it took the drivers, asked for a restart and now I have AHCI.
Respect.
Any tutorial on SSDs and how performance can be improved computer settings. software, etc.. is welcome. From my sincere thanks. If not asking too much I would like to know more about ssd's behavior, if for example any utility can be run or if there are contraindications such defrag. c.cleaner etc.. Personally I bought a OCZ VERTEX 2 but I have not installed yet.
I also tried bootmanager repair, but it says, "Startup Repair can't repair this computer automatically." So so far I have tried everything you say on the site.
tea, I want to thank you and tell you that: the latest tutorials posted is the best! I was amazed… for real, very good tutorials from all points of view and they seem to be coming on tape! swim 10 boys !!! there was a time when there were very few new tutorials, I thought maybe you said everything there was to say about the pc :)) but here's the proof! that I was wrong;)) grade 10 for https://www.videotutorial.ro
there is absolutely no difference between AHCI and IDE. It is only legend.
Hello
very good tutorialul.Nu are cleared if available ptr.XP. More.
I activate ahci… .I am very upset, I changed the value from 3 to 0, I changed from the bios the sata mode to ahci and after I save the changes in the bios I am stuck with the image with the motherboard that shows it when opening the pc.am waited 30 minutes and it stays the same… am I wrong somewhere?
I forgot I have a p5kr motherboard from asus
Cristi tutorial please if you do not change AHCI drivers look like AMD's AHCI drivers, something that everyone noticed and tutorials uita.Am integration with nLite as referred to only as amd or intel exista.Toate not taken pictures on the net that claim they support AHCI and RAID had only intel.Nu can say that I managed to solve the problem with the introduction of the AMD drivers, but want to be remembered that AMD's AHCI support is required for the AMD branded laptops in general.
I have an ASUS motherboard M2A-VM and I wanted to ask if you know, where I enable AHCI in the BIOS, as I have not found one, if you can please tell me and me. Dear!
I really do not understand why the double set has one in BIOS and another in Windows (Vista or 7)!
In my laptop, once the BIOS run in AHCI is activated, in Windows 7 there is no need to change anything! That value, in the registers, in Windows, running in AHCI already exists, without anyone having intervened after installation ?! Then, in which cases is it necessary to activate Windows as well, if, I suppose, the BIOS determines Windows, after installation to run with the AHCI activated ?! The tutorial is a bit incomplete, due to the lack of details above in my opinion.
Aaaa… and let's not forget… to answer vicentiu (November 29, 2010 at 03:41):
Is not just a legend and shows how ignorant you are away saying that there are major differences between running in AHCI and IDE emulation! Try the same computer on which you install, first in Win XP first and then try in IDE emulation mode AHCI, after that, try any other OS after Win XP (obviously, all with the original operating system, not cracks look otherwise it is more than obvious where your frustration comes to you!) and you will definitely see big differences!
If you have enabled AHCI in the BIOS and want to install an operating system, if you use Windows XP you will not be able to install it (in most cases, because Windows XP did not know when it was made by AHCI and so it has no AHCI drivers) if you have activated it and you want to install vista or windows 7, they know about AHCI and have several drivers for some chipsets (there are also cases when some motherboards use more "delicate" chipsets and drivers what comes into view or 7 are not enough and still will not allow you to install AHCI) In this case all you have to do is look for the drivers for that chipset and include them in the ISO image or disable AHCI. What was shown in the tutorial with activating from the registers is valid only if you stopped the AHCI when installing the windows in the BIOS and then you change your mind and want to install / use the AHCI.
If installing Win Vista 7 and had AHCI enabled in BIOS, no need to do that showed Cristi registry.
The reason that many thought before the laptop was not working vista install than the AHCI, because Vista knows to see him and he has included drivers and xp does not. Even today in many laptop models can not install XP just because of this (laptops come with AHCI enabled in the BIOS by default, especially if they have pre-installed on a Vista or Windows 7), but if I disable AHCI or include the AHCI drivers in the ISO image, you will not have this problem and you can install XP without any problem
what goes out alone when Adrian pc board bag vidio
I will answer short:
1) I have done that for a long time, I have learned from this site AHCI.
2) no longer use XP 3 years. Use Windows 2 7 years, 2 years ago I bet you never knew existed.
You lose the bet! I use Vista and longer and Win 7 currently, which is why I knew the AHCI. Starting with Win Vista and for Win Vista ripe native S-ATA HDDs! What I did not know exactly what I wrote in my previous post! But because you read between the lines and follow them on videotutorialele skipped, so you never understood exactly my bewilderment!
I understand very well. I said years ago you did not know the Windows 2 7 and not AHCI. I had the IDE and AHCI am a very long time. And there is no difference. Considering that the tutorial is on the SSD test, this test is totally irrelevant. How owning this? Considering that tutorials are designed for beginners mainly test should be done on a HDD. I tell you that many of those who want to learn on this site do not know CEW's that SSD.
BEAUTIFUL! I had no idea of AHCI and NCQ.
An innocent question I have:
-Linux is available on all the above discussion?
Yes, and Ubuntu or Linux in general knows about AHCI and NCQ (if the hard drive supports it) through the "libata" library. Maybe I'll do a tutorial on how to enable NCQ in Linux depending on how many will ask for this…
very good tutorial!! I've got two questions, namely:
1.ne can make a tutorial about RAID?
2. I have a sata / raid array enabled in the BIOS on RAID… does that mean it has AHCI set by default?
Thanks for understanding! gigel
Thanks for the tutorial, now expect similar one for Windows XP.
I 7 ultimate windows and I can not manage to enable AHCI in the BIOS. Someone help me? Thank you.
It was clearly stated in the tutorial where you need to enter and what you need to do. If you do not have such a thing in the BIOS, it means that your motherboard does not have AHCI support and that is enough. I recommend you watch the tutorial with "some brief explanations about the BIOS" that you can find with the search box on the top right
very interesting and instructive is what I found
I have a problem and do not know how to fix it VAM found
unleptop asus and when I go to check if I give the microphone goes ok
but when it get on yahoo to make video called or called name go
gives me every time he could not find link at the microphone
I did ferificarea at Yahoo for audio and vidio and there just is not giving me the microphone. nustiu what to do expect a sfat.tin to say that I scimabat and microphones and the same problem thank you in advance
I forgot to specify that I have a window vista
My opinion is that the audio driver is not installed correctly or completely (forget if you have the audio manager installed)… usually, when you can hear others and they not you, that's the problem… good luck!
Hi I have a big problem
I recently bought an SSD similar to the tutorial just lower it later version 1 Solid State Drive (SSD) OCZ OCZSSD2-1VTX60G, 60GB, SATA II Reading Writing 230 135
The hard drive is quite fast-loading widows, but the game is not up to nivelu an SSD.
I did testu in this article and I think came out pretty weak 4k-speed thrd Write only 64 7,97 Mb
http://img602.imageshack.us/img602/912/iastor.jpg
What have I done proper (2 deployments were 7 ultimate win)
A 1 bought ssd
Lam not formatted 2
3 I installed win 7 Ultimate 64 - the format option was not active to give it a format.
I enabled AHCI in the BIOS 4
5 I enabled AHCI in Windows just as is shown in the tutorial
We tested and is similar to the results registered printscreen
BA second installation
Cleaning 1 ssdu with Parted Magic boot cd loading a program and give it thence secure clean
I put the CDU 2 I formatted and Win option was not active but apparently secure wiped clean however we had for not win.
3 I put last drivare motherboard video 64, upda of windows,
I installed 4 http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19607&ProdId=2101&lang=eng
I did Twik 5 states of samples of here in one of the tutorials (index, defrag, etc.)
I did test the left testu
http://img602.imageshack.us/img602/912/iastor.jpg
I noticed that the ultimu test (left) to SSD data now appears to me msahci princely instead (note the picture)
I think about a test. I say it is a weak test plus hardu not load very quickly somewhere in a normal hd brand new system with it again.
Your opinions
These SSDs are also of many kinds !! if you got an SSD it does not mean that you will fly. Just like on normal HDDs you beat your wife waiting for a 32 M Buffer WD Caviar Green Hard Disk (which should normally be scribble to read reading) to write and read and another 16 M Buffer Hard Disk takes out a much higher speed for writing and reading for SSDs as well, not everything that is written on it SSD will have the same speeds that it took out cr it matters a lot about the type of chips used, the technologies used. we have several tutorials on what SSD means. One that really explained what an SSD is, how does it work… did you look at it?
Search this tutorial search box top right: What is an SSD and you can do compared to a standard Hard Disk
Plus I have the following errors and Results of tests
http://img12.imageshack.us/img12/5389/erorcopy.jpg
Is the fact their hardu I formatted?
I know practically Tutotialul thence I started iteresez of ssduri.
Mine is vertex 1 and crystal has vertex2. I personally seem much difference between tests so I asked here what.
Suspected to be not in fact their not I formatted before installation.
Thank you
Congratulations tutorials. Excellent. Thank you
Thank you from the bottom of my heart to Cristian for the tutorial on activating AHCI on an already installed windows. Finally, through the tutorial, I managed to do what many "specialists" have not been able to do for 2 years since I try to solve this problem. Their answer, like many others found on the forums. it was that this was not possible with windows installed. But I still have some doubts that I'm not 100% sure yet. I have 2 hard drives (a WDC WD3000GLFS-01F8U0 on which the OS is installed and a WDC WD6400AAKS-00A7B0, both with NCQ) and a M3N-HT Deluxe Mempipe motherboard that has SATA II.
My questions are:
1). After enabling AHCI in the BIOS's have NCQ enabled separately from somewhere else or he's automatically activates AHCI enabled site itself?
2). What is the connection between AHCI and SATA? Before activating the AHCI in Bios I was on IDE, now that I have changed on AHCI, to understand that I am on SATA?… Or do I have to do something else for that, or to look for and install SATA drivers ?. The moment I restarted, I saw that win automatically searched for and installed a series of drivers. Do I understand that he took everything he needed and I don't have to do anything?
I ask those who know how to forgive my ignorance. Thanks in advance for answers.
I did not msahci registry probably not support my board, I have no idea. My card is gigabyte 73PVM-S2H, I looked on the site but it shows nothing plaque details about AHCI, yet in the book motherboard am so in addition after you install Windows startup always greets me something like: if I want to set BIOS SATA to AHCI. Once I gave yes and no on has me only after I changed the bios back to ide, that after searching information on the net.
Who I reveal the mystery?
We salute! Folks, I posted on several websites have a request: teach me out as if I watch a tutorial that requires flash player?? I downloaded a 10 and all that I say ....
Maybe I do not know why I set the browser not as in IT, so I turn to you! Whoever can help me I thank you in advance!
I think the thing I posted on this site but nobody cared!
Once again please help me and enlighten me how to do I can see a tutorial!?
All my respect and esteem!
First you have to determine what browser you want to watch tutorials? Then you tell me what operating system you have? Windows 32 64 bits or bytes? You find this by right-clicking My Computers and then choose from the context menu choose Properties.
Basically Flash Player must be installed by 2 times there are two versions of the flash player. One used only by Internet Explorer browser and another version of flash player used by other browsers have.
Flash player for Internet Explorer downloads from HERE (Click on Download Latest Version written in blue on the right page above)
Flash player for other browsers have a download from HERE
Now close browsers and uninstall flash player that you have installed. Then install the downloaded version, and only then start the browser. Very important during uninstall or install flash player, browsers must be closed not only minimized in the taskbar.
Thank you! I uninstalled all other flash player, flash player I installed those two IE and another one ptr ptr 4 Mozilla Firefox my default browser RC and all are as before.
1-want to watch with the Mozilla Firefox 4RC.
I have windows 2 7 32 bit Ultimate.
3 I did as you said above, but ... nothing. Suspect that I need to set something but do not know why! Can you help me, please?
Once again THANK YOU!
I don't understand what you mean by "it doesn't work for me" apare your video player appears like in THIS picture? (Click on the word the letter in red) click on Close to play and the tutorial will automatically playa, if not start, click on the play button.
While a similar tutorial for Windows XP? if you go acativarea AHCI after installation. I have a GIGABYTE GA-P35-DS3 (rev. 1.0) I installed a Windws 2 XP operating system and a Windws SP.3 7. After enabling AHCI in the BIOS I do not see Windws XP only two SATA HDDs connected on-jacks purple and ATA HDD. SATA HDD connected on yellow jacks are not seen. In Windws 7 are all seen. It can solve the problem of Windws XP? (I found on google some ways it does not work either).
salut.ma can help put an xp on hp mini 110-3100 netbok? mention that known methodology (PowerISO, nLite, WinToFlash,), the problem is that I can not find drivers for the motherboard.
configuration:
manufacturer says Intel ® Atom ™ Processor N455, NM10 + Chipset Intel ® chipset ICH8m
now I have windows 7 care, in device manager it appears at IDE ATA / ATAPI controllers ——— INTEL (R) ICH7R / DC SATA AHCI Controller
–WITH CPU-Z —- MAINBOARD Hewlett-Packard model 148A, CHIPSET INTEL ATOM HOST BRIDGE, SOUTHBRIDGE INTEL NM10, DON'T I LOOK WHERE I NEED ???
You can give a LINCK WHAT TO (possibly where to IAU). Wait for response professionals.
THANK YOU
I 14 110-series models 3100, What's yours? In principle must be disabled AHCI in the BIOS and set the IDE or non AHCI. Or you have to integrate AHCI drivers in XP as noted in one of our previous tutorials. Write up in the search box to the right of the black edge: How to install Windows XP on an AHCI configuration, you enter and you will find the tutorial.
Completion hp mini 110-310sg
salut.ma can help put an xp on hp mini 110-3100 netbok? mention that known methodology (PowerISO, nLite, WinToFlash,), the problem is that I can not find drivers for the motherboard.
configuration:
manufacturer says Intel ® Atom ™ Processor N455, NM10 + Chipset Intel ® chipset ICH8m
Now I have Windows 7 which occurs in device manager IDE ATA / ATAPI controllers --- INTEL (R) ICH7R / DC SATA AHCI Controller-CU CPU-Z - MAINBOARD Hewlett-Packardmodel 148, HOST BRIDGE Intel Atom, Intel SOUTHBRIDGE NM10, do not look place???
You can give a LINCK WHAT TO (possibly where to IAU). Wait for response professionals.
THANK YOU
As I said above, or wholly or disable AHCI AHCI drivers as told in the tutorial that I directed above.
Then you have drivers for Windows XP HERE (Click on the word here in red)
question is yes driver exe maker I need one for integration xp.nu preinstalled?
1.in bios on hp mini 110-3100sg not appear absolutely nothing to IDE or non AHCI.se other way, in that case?
2.pt integrate AHCI drivers in XP, I need to find them than they preinstalate.nu. Exe
3.stiu to integrate AHCI drivers in XP, I did for a Acer Aspire One 532h.totul videotutorial was very clear in and out, but if not just do not find hp drivers preinstall
Any Exe can be extracted, most are just archives SFX (self extract) that can be extracted with winrar, 7-zip on both tutorial we already have on site. If the 2 this goes to extract the exe. Use Universal Extractor
I have an Asus m2a-vm and used long 7 windows on AHCI configuration and now I want to move on windows xp sp3. We integrated AHCI driver in Windows XP just like in the tutorial but when I try to install XP I blue screen crash; mention that I set AHCI in BIOS. How can I solve this problem? Thank you!
Congratulations. For many of us, experts or novices everything you are doing is wonderful and helpful. Please ccontinuati and the hardware. Thank you.
I would like to do a tutorial on how to activate AHCI in win 8
nasty, I think / it looks like my HDD WD7501AALS (Western Digital Caviar Black WD7501AALS 750GB 7200 RPM 32MB SATA Cache 3.0Gb / s 3.5 ″ Hard Drive -Bare Drive), cica good by the way, it doesn't have NCQ, I rubbed it in vain activate AHCI
Help me with an answer, if indeed this HDD has NCQ and NCQ HDD that I can recommend
To see if your hard disk supports NCQ
http://www.hdtune.com/download.html
Tune HD (you can find NCQ listed in “supported features” in the Info tab)
Hi, first of all I'm glad that you are doing these tutorials that help us a lot. I enabled AHCI just like in the tutorial, and in AIDA64 at * Storage - ATA - ATA device features * Native Command Queuing is checked, and it looks SUPPORTED, but it doesn't look supported-enabled or supported-disabled like other features, it's normal or NCQ does it still need to be activated somewhere? I have a GA-970A-D3 gigabyte card with sata3 and hdd sata 2, is that the problem? (I get the kingstone hyper x 120 gb ssd in 2 weeks for a salary). For Romanians in Spain I recommend pccomponentes.es for pc upgrade, they are the cheapest and very serious.
Hello, I just purchased a system components including: 1 x Intel SSD Series 330 120Gb and a barracuda HHD 2TB 64MB SATA3 both automatically set AHCI in BIOS but unfortunately HHD does not see ... (B75 Pro motherboard Amsrock 3M ). Please reply me what to do to take SSD for boot (windows7) and HDD storage. Thank you, Gabi.
Hello! If moving HDD to AHCI mode only lose data from Windows partition and the remaining side or the other hdd?
Thank wanted answered.
Do not miss anything.
Only data partition with Windows
I had windows installed on hdd 7 in AHCI after I installed the ssd windows sees both fresh and perhaps you do not have windows on the hdd and therefore does not see, try to connect the HDD on sata ports 4- 5 in bios have the option to select ports 4 5-IDE or SATA (gigabyte motherboard). I had this problem in raid0 after connecting to port 4 I saw the third HDD.
Hello !
Can not find msahci in registry. Can anyone tell me how I enable AHCI in Windows I do know that ASRock Extreme 970 3 supports AHCI. I installed OS win. 8 SV300 a Kingston SSD and HDD storage WD1002FAEX that makes a noise drives me crazy (squeak) and do not know why? All PC components are new. In device manager I looked and are on IDE controller and the BIOS is set to IDE. 100 times I searched the registry and found no msahci (and please do not tell me to get another look) is certainly another problem and please help me I do not want to reinstall the operating system if it is possible to make windows.
Thank you!
if you use windows as you wrote 8 then msahci not find registry on win8 is storahci (in the same section where you were looking msahci).
I got 1 enable AHCI problem as shown in the tutorial activities and aoclo go into bios after restart gives me nustiu not find what Ctrl + Alt + Del to give tr restrt what to do.
Thank you.
How do I enable AHCI in Widows XP 32-bit. MSAHCI not find in books. I installed wind. AHCI set in the BIOS and hard drive supports NCQ.
Hi there!
I also have the following problem: after activating the AHCI, this message still appears to me when I start the PC: "AHCI BIOS installed" (a picture here:
http://s111.photobucket.com/user/marskid2/media/AHCI_boot_message.jpg.html ) I want to know how to make me not occur. Can you help me?
Hi Cristi, I appreciate your work and the way you present your work. You are the only one in Romania and the first in this field. I have a question… .is the activation of AHCI done only on SSDs? Or also on normal HDDs? Thanks in advance, I'm waiting for a quick response please.
I have a gigabyte laptop w576m! I can install windows in AHCi mode? I don't know too much about computers… .and I don't know if I can! I installed in ideas… but when I change it in ahci the windows don't start! go to ahci and help me with something? thank you
Many thanks,,,, works
Hello !!! I have an asus x54c laptop and it doesn't work to install windows 7 when the host controller is set to default in ahci… it tells me when i get to the partitions that windows can't install…. etc… But when the host controller is set to IDE it works perfectly… only it moves very hard after it is installed… What can I do?
Install Windows IDE after installation apply what was shown in the tutorial video above then you restart (only after applying what was shown in the tutorial) and not let Windows to boot, enter the BIOS and move controller acquis on AHCI, save and leave Windows to boot normally. that's about all you need to do
I did as in the tutorial but the windows don't load anymore… a blackscreen remains without a cursor without anything…
And no light showing that the processor works not only when to start flashing ..
asus m5a97 r2.0 motherboard I have the ahci option in bios at sata option - hdd wd black 1tb - now comes my question… bomb…. how to set from bios - sata option - before installing win 7 64? ahci, raid or ide ?? !! ahci is somehow valid only for. ssd ??? thank you and that's…!… we learn from others
AHCI is for SSD and HDD.
AHCI Advanced Host Controller Interface means and is a technology that was originally made for HDD.
Hard disk and SSD must support NCQ.
The best. bv tineteo just as they fly laptopu MS bft
Hi Cristi !!! I have an Asus x54c laptop and I just don't know what to do with it! I installed windows 7 home premium on 32 bits from scratch with drivers with everything (I mention that the setting from the bios to the village controller I set on AHCI) and after some time one day I don't know for sure, I wanted to start it and it didn't start… that is, the logo with Asus appears and the dash in the upper left corner, from there it doesn't go on… I want some advice what could I do to them?