In this video tutorial to see how you can put a kit Windows XP (CD installation) on a stick USK to install on those small laptops based on Intel atom that does not have a DVD drive for reasons of space (asus Eee PC, acer one, mSI Wind).
This work is done using three different components, each has its role and together we will help you install Windows on stick on any computer, even those that have a CD or DVD.
These three applications are as follows:
1. USB_PREP8
2. PeToUSB 3.0.0.7
3. Bootsect.zip
You can take the bottom of the text press DOWNLOAD.
On long you longer need a Windows XP installation kit (cd with xp), whether it is on CD or as a virtual image (iso, FIU, yeah, etc.) is the same.
The last thing that you need is a USB stick (USB flash) preferably have a minimum of 1 giga, USB sticks are pretty cheap and does not believe a cost much 1 giga.
First it must estras usb_prep8 archive folder with the same name in C: drive, then you must extract the contents of the two archives that remained (petousb_3.0.0.7 and bootsect.zip) in just usb_prep8 folder we extracted earlier now usb_prep8.cmd launch usb_prep8 dim folder, if you do not have enough rights to launch it with administrator rights (run as administrator), then it says window to press any key to continue, to find a stick that had to be entered into a multi usb port, now press start and then a few windows appear with which you must agree.
Now we will start using command line, we do this from: start / run / write "cmd" and press enter or ok.
In this demonstration we will use two commands in the command line (start / run / cmd), the commands are as follows:
1. “cd c: usb_prep8” this to enter the command line in the usb_prep8 folder on partition c:
2. “bootsect.exe / nt52 h: (h: is the letter of the usb stick that you may have another letter, so put instead of h: the letter you have on usb that is f: or g: or h: or l: etc.
After executing these commands you have to close all the windows except the one with the command line that opened at the beginning when you had to launch usb_prep8.cmd, after which we will notice that the content of this window changes, here we have different options but what we are interested in point 1> where we will introduce the source that contains the windows xp kit, ie the letter of the drive that contains the windows CD, we are also interested in point 3> where we indicate the path to the stick and point 4 > where do we start the copying process, in principle from now on it will be just a routine until the end, we have to agree with all the windows and not remove the stick until the single window disappears from the screen.
After a few minutes you will stick with xp on it ready for installation, insert it in the computer that you want to install, set the BIOS to be the USB stick as a device booting mainly when the turn will be two options: 1 2 gui mode and text mode, you must choose the text mode for a normal installation.
I want to thank those of CHIP magazine and especially IONUT BALAN that gave me the inspiration to create this tutorial, I hope not to offend us because we have learned something of his article to will give to you in finally this content as a video tutorial.
DOWNLOAD
Cristian Cismaru CHIP after an article written by Ionut Balan. CHIP site CHIP Blog
About Cristian Cismaru
Thank you f Superr taree Cristi much !! as a videoturorial !!
FF good tutorialu.
this is really loud
@Ruben: @tataee:
Besides my little effort must thank IONUT BALANCE from the CHIP magazine's article, that article there is no tutorial in this simple form.
Ways to put the stick in operating system are many but this is very simple.
Respect the work of others and that is why I can not get all the appreciation I alone in this tutorial I was just a storyteller, research work did Ionut Balan magazine chip that did not know him but who also thank I hope not believe that I stole article in any way.
When they are original are original, but now we just took over and I translated everything into a video tutorial.
Cristi I have a problem after I make a bootable usb, stick to install and after reboot copy everything and takes, and takes over again and copy etc., can you tell me what to do?
You remove the stick and put it back after passing the bios.
Hi I have a question I want to know how to use the remaining space on a USB image made of several operating systems to have there enentiale after installation kits for windows.
Thank you in advance.
good job greeting happy holidays
Much the tutorial very good and useful: D Anyone know a gates that can save the photos on sites that have flesh?
My congratulations cristi greatly tutorial but Ionut Balan. Installation of windows at my urmataore paote'll try something :).
I have a claim that his raoga I always install Windows and has a laptop but unfortunately has accer dvd drive :)). But on a desktop that has the DVD drive can be installed like a Windows XP?
@danezu: You just proved that you didn't look at the whole tutorial and that you weren't careful or that you didn't even read the text above the tutorial !!!! Because it was specified that it works on any system, whether it's a desktop (pc) or a laptop, it doesn't matter, whether it has an optical drive or not, it doesn't matter… "thank you" for your "attention"… that's your respect… how can you ask something when it was specified twice in the tutorial and in the text above the tutorial? how do you feel about the tutorial if you haven't even followed it head on? how can you say it's really loud when you don't know what it's all about? This is your respect… nice of you or rather yours!
hello luck still useful tutorialu
Bye Cristi, thank you very much for the tutorial. All the best.
Bravo!
after writing that command line with bootsect.exe… message appears:
bootsect.exe year is not internal or external command file or bach.
can someone help me?
why you changed the interface was better with the old guy that revolves circle and choose from there
bootsect.exe year is not internal or external command file or bach.
or not good times you wrote what you wrote there
@Alex:
If he came to me live when I did the first tutorial can not handle it and not you.
You may not have extracted all you need and how to.
not working so today, in error, but is much easier. daemon tools once mounted in the partition that is intaleaza directly from there.
@Alex: Besides the first order is cd c: \ usb_prep8 will allow you to enter the folder usb_prep8 the C: drive and run everything from there if you put in another partition or if you do not have administrator rights to go
After the above command should give this one bootsect.exe / nt52 h: Here we assume that h: it stick, if vostu may be another stick.
This control bootsect.exe and send it to stick h (in my case) to do their job.
As you need to extract the files out as I have shown in the tutorial, I did not put them there ready placed, this will have to do.
Follow the tutorial carefully and ask all exactly as I've shown, otherwise it will not work.
Here goes with half measures have made it perfect.
Let that not so hard If you are careful.
Alex know that you have high speed, take it slowly and carefully follow the tutorial.
My bro did not mean to be rude but this version I'm easy
"Http://www.youtube.com/watch?v=2Vt_8p0VllY"
I hope I don't take money because I "promote" this and I hope that after you see it delete it seems easier because you don't make many settings in cmd I know it's a nice little programming but not everyone wants that. Thank you tutor here for your work. All the respect. Have you heard of ophcrack> :). Good luck
With what program filmed at cideotutoriale!? PliZzzZz Spunetimi!
@X3SPRE10:
To me it seems more complicated boy doing there.
I did it with two command lines, besides that boy has the same tools are available only in a package, and I could do that but you can use these separate tools and other stuff as it was show other video tutorials.
The ophrcrack not heard!
If you follow the tutorial carefully you will realize that it is easiest way we applied it to us.
I can't boot from the windows stick to a desktop with an Asus P5GPL-X card. I enter the bios and in the end I manage to make my stick show, but when I boot from it I see the black monitor screen and the letter "j _" (as I wrote, without the quotes) on the side from the top left and that's all it blocks… Mr. Cristi can you help me with any information?
to another descktop I could, but you have to go to the second stage
one with "GUI mode" maiporneste not the actual installation (please note that the time I tried I had already installed Windows XP on one partition, I basically try to experience this tutorial yours), Power Windows me that I had already installed on a partition. I do not know how clear I was, however, can give me a suggestion? Thank you!
For those who want to create a bootable stick with Vista or Windows 7 I propose a simple variant.
-Insert the USB stick, necessarily have 4 GB;
-To have a file on disk, Vista or Windows installation kit 7 (whether it is image or not)
Preparing stick design:
log in with start… all programs… accesories… right click on command prompt and run “Run as administrator”
Run the following commands:
diskpart (command launches the stick's partition)
list disk (you will see all drives in PC)
select disk # (where # is 1,2,3,4 or 5 and represents the number of allocated disk's stick here and see how the ability FAT or NTFS)
clean (it will erase the MBR on the stick and ANY information about partition)
create primary partition (primary partition creation)
Select Partition 1
active (not mark partition as active)
format fs = NTFS (stick is formatted as NTFS, it may take several minutes. according stick's capacity)
assign (Installed partition and sets the drive letter)
exit (partitioning stick's end).
Creating boot sector (for six can boot from the stick)
log in again with start… all programs… accesories… right click on command prompt and run “Run as administrator”
Now go to bootsect file of Windows Vista or Windows 7 and entered it when you run the following command
-Bootsect / nt60 #: (# represents the letter's stick)
Copying a stick kit:
Now we can copy the contents of windows from the image or from the file, directly on the stick (so be careful… as if you had a CD or DVD in the drive and by dragging and dragging the files to the stick
That's it… you have a bootable stick with windows ready for installation.
@mihay:
Do you think if you put the same question to two different IDs will get an immediate answer?
@mihay:
I captured with Camtasia, because what we did is called capture of video.
Shooting is a video camera, capture method is to record a video stream is a desktop video stream.
But things may not interest you, I facuto capture with Camtasia, you can do with a little studio, we have a tutorial on this.
bravo guys are the hottest
Thank you and I pt. this tutorial!
Good luck !
You are my favorite and always will advertise to friends who want to learn.
Bafta!
I forgot to ask you something: After you install the usb, windows, I could add on that some kits or other USB Support for files?
Thank you in advance !
For DangeR… as much as you want and you want up to the maximum capacity of the stick because it has the properties of a hard drive… you only format and partition it
For example on a stick have windows 16 7 GB / 64 bit bootable, I put the images 2 win xp and vista made with Acronis True Image tablets, which are back-up in just minutes 4 8 or any of the windows sites.
… Sorry I restore from the back-up images when I need… it's a late hour isn't it?
Thanks for this tutorial, however I have a question, for me after installation when windows opens it finds two boot sectors, I have to wait 30 sec. or yes I enter what I selected, on one of the two sectors. What to do. Thank you
assume that the image may not post coment DOS message (bootsect.exe year is not internal or external command file or bach). Who can send pictures, or possibly make a little video capture tutorial identical steps, but do not know where to post. staff ask someone to give me advice on how I can send pictures or videos with that message. Thank you.
Hi Cristi, what else did I want to know, can I put Vista on the stick? I have a 4 Gb Stik and I would try… Ms Anticipat !!
@Ruben: It is generally recommended to put XP but I think it works for vista, not sure have not tried, you see that an interesting comment posted Fanibu can help.
@Danger:
I do not think it is a good idea to put other software on the stick, if you want to do that you have to change Windows XP with nLite (we here) and to introduce programs.
Speaking of sticks… maybe what I'm going to ask is stupid but that's it, I'm going to risk: can sticks be partitioned like a hard drive?
And another question that was mentioned, but it was not too clear: if we stick 2Gb and put XP on it as indicated in the tutorial, my bineintleles a free space remains on the stick can use that space left to store and other data stick or confuse XP?
@bl: Yes it works partitioned like any hard drive… someone even asked this in another tutorial to the one with Acronis if I'm not mistaken then he came back saying that he managed to partition the stick… about other folders or files read Cristi's last comment from here to DangeR !!!
Nice of you, Christ, as you thanked IONUT Balan CHIP magazine for ante-documentary made about him, but I fear that he has not used any more or less tutorial at the following link:http://www. Therefore, neither he, like you, I do not think is a native Cristi tutorial.
But since this is not as important, but that there is a much simpler tutorial on youtube - from the multitude that exists about this type of installation - that will show you step by step how to do it: http://www.youtube.com/
Note: Before however, will prevent that from both tutorials related links above have only drawback they are in English.
As the only file you will need can not be doawnload-at the old link (http://www.), I'll put another link where you can download it to: http://www.
So follow both tutorials and you will see that one on youtube is much simpler than any others mentioned above.
Cristi
I ii translating the man above me, I had no problem. Now be managed.
I have to start with the fact that the comment I made earlier that was waiting to be approved, but that seems to have been censored and was not posted on the site!
Here again my complete tutorial above:
There are many tutorials about installing XP from a USB memory stick, including one with a procedure and an application (if it can be called so) much easier: you can watch on youtube at the following link: http://www.youtube.com/ Appropriate file shown in this tutorial you can find him you download from: http://wwwBecause previous location (the tutorial) is no longer available.
Another tutorial, identical to the one on this site, but detailed step by step without explanation video, you can find it at: http://www
Here, I re-iterate what I said in the comment I was referring to and which was not published: Mr. IONUT BALAN from CHIP magazine, he is not the originator of the tutorial either, because what IONUT BALAN and Cristi did - the administrator of this site - exists in the same form at the link above. Admirably, IONUT BALAN shows his gratitude, through which Cristi practically acknowledges the non-ownership of the origin of the tutorial, but I doubt that IONUT BALAN deserves these thanks, given the fact that IONUT BALAN did nothing but translate it from the original.
I hope that this time, this comment will be published and not censored.
With thanks.
@xavier:
I thanked Ionut Balan for Chip magazine I read the article.
It's you I think there are other sources on the net and not have to give evidence in this sense.
As long as you put a link in comments may be seen as spam, it would be better not put links, this is a comment field, you can say what you want in decent limits but please no links.
If indeed promoted is something we promote but not so wholesale links.
Know that not censor anyone, but it may have been deleted because we use very aggressive spam module spam because every day we have big problems.
The future not to put links (of any kind) and you will be approved directly.
@xavier:
I am an honest man and respect the man who first published this article and even those who created these tools, I have not taken any credit for that moment.
As you say you should not do anything because whatever has been done before by someone else.
I totally believe you and do not doubt your words.
A video tutorial is an easily digestible by many users who would otherwise not have come to know this method.
Nobody is born learned, each learn something from somewhere, it is important to learn, less important is how we learn.
I did not understand what we did wrong?
Can you tell us!
Hello, I found Tell me dc not stick pretty please
@Alex:
Alex Sorry I did not realize, I thought of those problems there.
Tie you came out, you put Windows on stick?
Supporting our friend __ Cristi-admin__ to say that I posted myself above kind of minitutorial wrote about how you can make a stick bootable vista and windows 7, made entirely by me, but by means of information obtained through study of the net and took me long enough.
I did this to complete your video tutorial and not to comment that it was done by one or the other as it tries to "pull your sleeve" __xavier__.
If someone wants to make first observations must follow closely the corresponding explanations videotutorialul and then to come up with pertinent notes.
After our mutual friend __ xavier__ will come with constructive notes, documents and full efficiency then maybe he will realize what your effort and videotutorialului other team members to make our life full of excitement and charm.
Before throwing stones need to meditate.
@xavier: This guy smells like air spray to me !!! I don't know why but I have this impression !!! finally… dear user the tutorial you are talking about from what i understand from your comment is in english and it is not empty but just text… did you think that there are users who don't know english? I myself am hard-headed… here I don't understand anything from a text tutorial… you do so… on the other hand… it's tiring… and the word of colleagues is much more “digestible” easier a video tutorial in which you speak Romanian and show step with the right step !!!
@Fanibu:
Fanibu cards but I applied what you wrote there, if it works it is very good information and I thank you on behalf of the trustees.
If you like to research and find new things to share with all of us invite you to make video tutorials videotutorial.ro.
If you want and wait for the mail you with an answer.
give me your id too, give me add to fyrez_12, because I can't get anything, I made the boot stick but it doesn't boot, I sch in the bios, but nothing… give me add please
Answer both Adrian and for Christ
If you reread the two previous comments, mine, very well, you will see that I did not bring any accusation to anyone, much less to Cristi. If you were more careful - and not put on the map, Adrian - you would have noticed that there are two tutorials, one of which is non-explicit video, while the one on youtube is also video. It is true that both are in English, but the reason I mentioned the one on youtube - not knowing that in the idea of completing Cristi's tutorial, I can not post links from other sites - is for the simple reason that it is much simpler and FIRST of all it is more complete, as it goes so far with the demonstration, including the actual installation of WinXP, as well as the fact that it shows its installation in case these laptops come pre-installed with Linux , which makes the installation a bit more complex. I am one that I already installed, long before the appearance of this tutorial (somewhere in September 2008) and I used the video tutorial on youtube a lot.
I did nothing but come up with another option on the same subject, I share the same common idea to help those who encounter these problems. That there are people like those who are "hard-headed" and do not seem to understand English, they just have to follow the tutorials they are able to understand. No one forces anyone to follow those who do not understand them.
The fact that I posted those links on Cristi's site - which I also admire, honestly for what he does - and I didn't post on other sites, means nothing more than that I wanted to add to those what he wanted to prove, to bring my contribution to him to understand the same situation!
Thousands of apologies to those who felt offended and disturbed by what I posted, but if you bring a surplus of information even with reference to those who are in another language - English (without which even those who will expose tutorials in Romanian, he couldn't have done it!) means such a big inconvenience, then all you have to do is follow exactly what you want and be content with that.
@xavier: If you read all the comments on this site you would see that this includes from 11 year olds to the elderly, retirees… Strange or not… I gave an example as if I did not know English… believe that on the site these are some questions you come across !!! Some of them would be: how do I type on the keyboard? Where is the print screen on the keyboard? If I play in wnamp does it play? So don't say it's hard for you to believe that people don't know English !!! I don't understand Romanian either, although they watched a video tutorial in Romanian, it was explained step by step, they come back in comments with questions they have answered in the tutorial. Now I come and ask you how these people will understand the tutorial in English if they don't even I don't understand Romanian? Think that there are people who only now get their hands on a mouse, and they have no idea what the left click or the right click is or what each click does… we have to be for everyone! both for the advanced and for the beginners or intermediate !!! Take it and learn from the tutorials in English and we'll learn from here ok?
@xavier:
Thank you for bringing additions and we are convinced that there are different ways to accomplish something.
I'll take your word what you said, we do not pretend to have invented anything, just took the information, a focus and exposure in an easily digestible format.
The longer you wait for the new additions and do not think we mad at you, the only thing is to not put links only if no other way and let us know before because it is a very big problem and the spam sites I do not want to be seen as a source of spam our modules.
If you're expecting cation interesting information on dearly.
Adrian!
As a hurry or just do not know how to write correctly and completely Romanian, can not take me, than at the idea that you are among those who do not know the assertions you. Either way, no way to write Romanian!
No matter how much you like this site and help those less known in the computer being explicit demonstrations in Romanian, is not addressed in any case those who have no idea where the ENTER key, for example! For them, this tutorial is way over their preparation, the site NOT to be responsible and who do not think that proposing to teach, to educate them. If you refer here to those who have only 8 classes and want to enter directly to college - that's the extent of comparison right - then go ahead to use them you do tutorials and computer skills! On the other hand, if they will not necessarily want to come to college already 8 only classes, they only, they will not succeed forever and ever! And by the way, a detail that is not mentioned anywhere, on any tutorial on this site: another "tool" indispensable for those who want to debug their own - at least in terms of software - the computer is English! I assure you that without this language will not succeed, any tutorials will find on this site. Why? Because it always will find information that can not be covered on this website and you will find in a much larger and better articulate the Internet, but ... only in English!
Once again: the example of the youtube video tutorial was posted FIRST FOR THOSE WHO UNDERSTAND and write correctly not only in Romanian, because it follows fewer steps with a simpler application, BUT THE MOST IMPORTANT for the fact that it brings in addition the INSTALLATION of WinXP , which is missing in this video tutorial. If you follow this tutorial, above - especially for those you gave the example above - you will not be able to actually install WinXP, as this tutorial does nothing but prepare the support on which it is will do the installation: USB memory stick! The actual installation DOES NOT EXIST! Therefore, this tutorial needs to be improved - with the help of the site administrator - obviously, in Romanian, with exactly what it lacks. Until then, being incomplete, it will not help you to install WinXP on your memory stick at all! As far as I know how to read Romanian well, the tutorial is called "How to install windows xp from a bootable USB stick", but in which the actual installation does not exist!
Instead of wasting your time actually criticizing a piece of information, you would do well to watch the video tutorial on youtube and only then would you notice the big difference between the two tutorials: the present one and the one mentioned by me and you. you could complete this video tutorial to be - as I said - really useful, "from Vladica to Opinca"!
@xavier: If you came to criticize my language and the fact that I don't know how to write, drop it !!! I repeat for you and for the others who criticized us that we don't know Romanian well… THE ROMANIAN LANGUAGE IS NOT LEARNED HERE, BUT ABOUT IT !!! Let me be illiterate, but skilled in IT and be strong in Romanian! ok? Or possibly go to the Romanian teacher to repair your PC or help you with problems related to IT. You have no idea what this site has to offer but you dare to say that this site is not made to educate anyone in IT… how do you know? are you an administrator here? It's good that this is exactly what this site aims to support everyone, both for beginners and advanced and for those who do not know where the enter key is !!! It is a tutorial about copy, paste functions. I have been on this site since it was founded and I know very well what it does, you probably discovered it 3 days ago, you saw 5 tutorials and I don't know from where to where you can afford to say what proposed this site !!! From here we started with this site from those of you who do not have the patience to explain to a man where the enter key is and there are great connoisseurs of Romanian and English but on the practical side in it are cabbage !!! your comment addressed to me will be useless because I will not answer you because you have the insensitivity to say something you have no idea… you have never talked to Cristi to know where this site came from where it started the idea and what this site proposes !! So I invite you to launch your theories on the Romanian language on another site here we do and talk about IT !!!!
@xavier: Both Cristi, Boby, Alex, LuciGL do tutorials on this site, and each of us explains to the man when we guide him to click on something to do what that word means in English, and what it is probably used for. your reply if you did a tutorial would be "give it to me and I will click here as it should, if you don't know what that word means, learn English, I'm not going to teach you English" that's what you would say in a tutorial, look, I'm learning another English or what that word means and I'm not like you, because I have patience and I like to learn another step by step what and how to do and why to do or what to do… Once again I tell you… the fact that you allowed yourself to say what this site proposed without even knowing it doesn't make you be noticed here !!! If you have something to say about IT, we listen to you, if you want to keep our Romanian language theories or to teach us Romanian, we invite you to do it on another site! The tutorial about Copy, paste is made even by the site administrator… so easier with statements like "this site is not intended to educate anyone in it" because you do not know them all!
You are waiting in vain for a reply… anything and no matter how much you post from now on, you will not receive!
@xavier: That was the idea, that means that I do understand and that even you thought you did some wrong afrimatii! Maybe you learned something from this and other time neither here nor on other websites you will not give their opinion about what has proposed that site without even knowing what it is or not to speak to the admin site or without it know!
No, that was the idea for which you will not receive a response, but I've proven once again that you were able to understand! I have made false statements and from you much less! The only one who could say this is just the site administrator, not you!
@xavier:
Dear sir, to install Windows XP on a stick does not have to do something different from the normal installation CD.
I specified in the text of the tutorial the only difference, namely the dialog box from which the user must choose this "text mode" after choosing the boot path from the bios.
We have another tutorial to install Windows XP on videotutorial.ro.
Eventually I do not know what your problem is and what you want from us.
Want to watch tutorials on videotutorial.ro well, and do not want better, do not we have a discussion with you endless.
You answered my comment, I said what I had to say and do not know what else I can do.
Why you follow this tutorial if you do not help in any way.
Adrian is right when saying that sow the aerosol behavior.
I do not understand what you want, what bother you, I appreciate your additions, I said from the start that I did not invent anything.
I'd be curious how many are of the same opinion with this Xavier who does nothing but bite and run!
I ask all those who continue to post on this site to give each a rating from 1-10 Xavier's behavior.
Just this:
xavier = x (where x is the note at 1-10).
You are waiting for Xavier with a tutorial!
In peace sign come ..
There are fundamental issues, which if you consider, you will make life easier both to you, and your visitors:
1 should know Romanian language (and English) so you can communicate effectively, it requires conciseness and clarity of expression that you can explain something;
2 it is important to use your own technical terms (to explain them), explaining vaguely (through words like “stuff”, “something”) the message is “diluted” .. and the person learns “wrong”;
3 No matter how stupid some people's questions may seem, people come here to learn, whether they are educated or not. Maybe some people know more than you in certain respects and you take them for granted, without realizing that the embarrassing ones are the ones who "attack" the gang.
4 ironies, gainariile, mistourile, stings, intimidation, airs wasting both your time and visitors who seek to inform.
5 we all have to learn, regardless of age, "schooling", how many children we have at home, so let's learn from each other in an efficient way, using our logic and not "feelings".
7 whenever an improvement is welcome, as you Romanian, English, like you it, lifestyle, no matter, there is not but I do not want ..
I saw that you have a problem with cocalarii and pitipoanecele, stupid, lazy, noobii and others. Surprise: and they will visit the site so you have to make yourself understood for them.
If you keep claiming that you made this site to teach everyone, then let's see the "results" that support your claims.
PS In vain you take my smell, people will keep coming to question what you say .. this does not mean that if I am the first with arguments and without "feelings", I will waste my time indefinitely ..
"You can't teach anyone anything. You can only help people find out. ”
Galileo Galilei
@aerosol: Are you talking to me about fairness and principles and learning, who censor comments without someone swearing at you or speaking ill of you, but only because they are trying to make it clear that you do not specify the source of the article you are publishing? In your place, I wouldn't even open your mouth, you fool… as if it were a question of not visiting the site, what are you doing here? Did you come to learn from those you consider stupid and arrogant, arrogant and airy? I invite you not to step on this man for nothing! Look better in your yard and see how you are then give lessons to others man with 2 girls you are !! We found someone to throw smart snow with a stone that shows us how smart he is by digging on wikipedia after pictures of hard pieces and videos on youtube, yes you have no idea to express yourself and explain in your own words… you always give us as a wikipedia source, if you want to know on wikipedia I don't write the definitions of the great scientists but also the people, so you don't consider that everything written in wikipedia has to be believed and that what is written there is indisputable… as long as you see how naive and skilled… would you do well to learn something practical and not "relate" to us from wikipedia or the definition given by nea Joule… what do you know outside of theory and what is your name? To criticize and hunt down mistakes, that's all you know how to do… Even if we "attack" in the "pack" at least we let the man have the right to reply, not like you do by deleting the comment, because I'm telling the truth and I'm giving you away that you take articles and no at least you don't have the common sense to give inspiration… halal of yourself, be ashamed !!!
@aerosol: Every man has "free will" in him and the ability to distinguish if I or you are right… I don't think Cristi or I got on the phone to call visitors to come and support us in comments or to keep up with us in comments… each of us has the ability to distinguish good from evil, the fact that someone says that we do not mean that he is manipulated but that he has eyes to see who is right in his statements, we did not force anyone to stick with us or attack someone in comments, if the people do this it means that they feel the same as us, Start your blog and make monologues or write another article about hypocrisy (don't forget to specify your name) about censorship (also don't forget to specify what censorship you resort to when a visitor wants to say that you have taken an article and it is not yours) and one about how impartial you are but in fact you are only for yourself and you don't like or dislike when someone attacks you in a civilized way and not cursing , when someone draws your attention. The conclusion? YOU DON'T KNOW HOW TO LOSE AND PUT YOUR NAIL IN YOUR THROAT THAT YOUR BLOG HAS LESS AND LESS VISITORS !!!
Folks, today is Easter! You have to be better, more understanding. Fi's your understanding!
During the Easter holidays holy Lord Cristian Cismaru team wish good health, happiness and success more and more tutorials. Also I wish you health and fulfillment in all respects to all those who use this site to learn or improve.
Happy Easter!
@George Iordache:
Thank you very much, we wish you health and wisdom and loved ones.
We were waiting for us.
I have a Asked Question, I put XP on the stick just like videotutorial, and went I did restart the comp I made bios settings to boot from USB, and I enter the letter j appears both here and want to get stuck and I know where I wrong? much the more.
at Holly Easter wish the whole team a pastor blessed by Domnul.pt aerosol, Xavier and others like them if you do not like will not uitati.in instead of Christ I would give them banned vecie.orice no man greseste.voi you never wrong? do and I like them and then comentati.poate for these people to learn something and altii.daca guys are omniscient means that you do not need ei.noi are more stupid and want to learn ceva.desteptii that you have they learn on the website acesta.salutare all
@maryomax:
Incearcasa resume Statute of the end, that means no boot sector created the stick.
In order for windows to be able to be installed from the stick, a boot sector must be built on it, for this it is "bootsect.exe".
Statute of trying to rebuild all over again because something went wrong, try to stop all applications when doing this.
After shaking and you have to install from the inter stick in the bios to "hard disk boot priority" (it can be called otherwise) and put the stick in 1st place with the + and - keys or with F6 and F5, in general the bios are different but in any case, the hard drive or hard drives must be there at "hard disk boot priority".
To boot from the stick to the boot menu does not work as you boot from the cd.
In my bios go to: Advanced BIOS Features / Hard Disk Boot Priority and make sitckul here 1 ranked (priority) go on the stick and move it up with +, when installed WinXP definitely go back to bios and Chicken hardware priority.
I told to you may differ settlement bios but basically the same menus and submenus are called.
SUCCESS.
@eugen:
Aerosol and Xavier think I'm the same person or are friends.
Aerosol also has a website where he tries to do so, unfortunately doing things would need and lack of visitors.
He believes that coming to us with a stinging criticism and to grow traffic overnight.
I long ago I made a proposal that I told him to join forces to promote computer use in an effectively disregarded my proposal and then began to hunt mistakes on this website.
It is a shame that people are still thinking so instead we do something better in mind.
I die when I see that people prefer to waste time elsewhere on the net instead of learning something useful that can would use in later life.
We need to learn continuously to improve ourselves, we can not afford wasting time with nonsense.
We are a poor people and IT only think I could do more.
India is the largest producer of soft, we could take an example from them.
Christ the Envoy! so it is said in Romanian not in Romanian in it is the difference of semantics. I have not seen anywhere or elsewhere literary works or works of grammatical analysis belonging to Xavier or Aerosul or Aerosol or IT or High-Tech.
Leave your grammatical analysis at the level of the keys because I know for myself, that you don't know how to separate "mirasarlumeadetine" and make a video tutorial "like a book" and post it on the net to see which is "smarter".
I made this mix of words and phrases to show that it can make a nonsense or delusion of all.
Let's get better, simpler and more understanding with each.
Let him call pa Xavier or whatever he was chewing gum in front of the computer or the PC (do not know how he thinks it's called) and continue your work honest and common sense.
Sincerely,
Fanibu
@Fanibu: Thank you and I don't think we should waste our time with such people !!! Because we waste our time too !!! However, you had to specify that we did not put you or we did not call you to post comments against these 2 gentlemen and they will accuse us of attacking in the "pack" again =))) That's how people throw stones, without -to realize that he is actually just as "sinful" or maybe more "sinful" we like to take care of the goat in the neighbor's yard instead of taking care of the goat in our yard… Instead of being united we hate and die despite, and we try to defame others better than us, The competition was and will always be very good but not in this way, not offending and giving us great talents… or great knowledge of lexicon and grammar of the Romanian language!
With pleasure…
Adriane There are not subjected parrot or someone to repeat or perform what you want. I my personality, my respect for what I do and I take responsibility for what I mean.
I will never waste time with anyone who does not have the strength of character to discuss beautiful things that we descreteasca forehead and we create a good feeling.
I will never accept that there are no mutual respect.
I do not want to hit any in your work or in what Xavier thinks or anyone else.
We live in our smallest democracy and we can express ourselves freely anywhere and anytime… proof of what we are doing right now.
I am not part of any "pack" I am a computer rebel and a "victim" of the passion for this new science called Computer Science… meaning the desire and science to inform you.
I'm not on anybody's side than human respect and common sense!
I have an ASUS panarama I gave him a lot of money and it's a bullshit see that not only has got a great impaled him think it out the window after all. every month i have to install Windows if I find I give the 100 lei
@teo:
Dane few more details maybe we can help you
Cristi's proposal valid? I would agree to cooperate. Then you were not very clear, but if you want to collaborate I agree.
@aerosol:
I have to consult with my colleagues that it would be unfair to make a decision alone.
@ Cristi-admin
Thanks Cristi for your opinion, and yes I know about that nLite as I saw all of you on the site.
Staff honestly I like your style of doing tutorials.
We support and are with you. I have recommended all my friends and I can say that Meow thanked me and I to you.
Bafta continue and will not let you do what you like!
Happy Holidays!
thank you very much
Nustiu has, I give you boot the stick 8G after this error occurs
Because Windows could not start the Following file missing or corrupt.
sistem32 \ hal.dll
Please re-install a copy of the above file.
I understand that the hal.dll file is corrupt but I can't find it on the stick, it needs to be copied or….
I installed Windows 3 or stick and just as that above error is giving.
please help.
If anyone can help me, I have an OPTOMA computer that's called, I mention that instead of HDD it has CF2, I CAN'T ENTER THE BIOS I tried all the key variants I know F1 F2 DEL states that I don't get the message … key ..to enter SETUP it has no CD-ROM or FLOPY, HOW could I install OS on CF2
@aerosol:
I spoke to all who have direct involvement and decided that no such collaboration is possible, I did not vote at all, I left the decision to the discretion, agreed some others do not.
I wish you success and inspiration.
I saw that you're good at computers I ask you to please help me with anything I have follows: the problem I installed vista more times we did not give internetu install, I downloaded all possible drivers on their site and for vista and for giving xp to install yes nothing that does not go and does not appear to manage my NVIDIA nForce Networking Controller that now I write something with family network and goes. I have older PC and I remember I did not have time cd-u and called someone to me who had the net and came with drivers taken off the net and did not go until I had taken the cd-u nam I give his I'm interested in that for xp vista cd I
ma tot kinui cu windowsuri xp divrese… .imi da errors type -hall .dll and others bleah… .is installed on stik yes not on pc 😛
@marius: We have a tutorial on how to integrate the drivers in a windows… go to the website of the manufacturer of your motherboard download the drivers integrate them in windows with nLite make an iso image and then put it on the stick… you can follow the tutorial here https://www.videotutorial.ro/?p=921
SCZ as my msj has nothing to do with the subject… ..
I can put in the kitu with windows programs ge: winamp, utorrent, etc….
I asked the same question on the same site… and Adrian… ..but he sent me here… .. I tried to put the program .exe adik installation kit and it doesn't work. I also tried text type but not apples or asha ……. is it possible or not ????
I honestly got bored of asking you si .and I'm not the only one… .. to the comments of a tutorial with uTORRENT I think…. corleone and others will keep asking you… .but don't give any answer, give it from bar to bar….
tomorrow is the last day of licensing with windows 7: ((and I really want to change it… ..
PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!
multzumesc advance
@haosss: I beg you and I asked you once again and in quick comments not to repeat and not to post the same comment that you will not receive an answer sooner if you post twice !!! yes from the right !!! I told you to read the comments on how to change a windows with nLite there I said what you need to integrate software in windows… I told about AddonMaker as well as where you can find tutorials with it… if you have not read them to be healthy!!!
the bootsect.exe / nt52 f: not wrong whenever I write bootsect.exe Stik gives me my bach file is f.cum to make it past the asta.multumesc
I also have a problem. I want to install the windows on a neighbor but the CD does not start, even the CD remained with him in the drive because I can't take it out anymore, nor does the light bulb from the dvd-rw flash me. So I start the computer and Press F2 to run Setup and Press F11 to bot menu appears. Press F11 to boot from the CD but nothing, immediately after pressing F11 appears Boot Selection Popup menu has been select. I also pressed F2 but nothing, Entering appears Setup ...!
Sometimes the boot menu appears but only gave me options to choose Floppy.Repet I stuck with the cd in DVD-RW, you can not remove it.
Can you help me?
When you go into My Computer in Devices with Removable Storage Removable Disk have multiple disks, 5 am and I make them disappear permanently removed temporarily managed to restart the PC paan give the Safely Remove Hardware.
very good tutorial, I really need something like that for an acquaintance… question? in the tutorial at the end you didn't say exactly what is the last step, or the last thing that needs to be done to finish the whole job… I still haven't done what you said there, but I will do it these days.
It is important what type of windows (I mean the type of XP)?
ms!
I have a problem! I put Windows on stik but when I give the second option appears after me NTLDR is missing ms.
When you try to do as I ask progranul format in the ajunje momemnttul to 99% gives me error
like {Formatex errors [11]: An error Ocurred formating the drive}
I'm not much of CLC sites but stick it again. I have Symantec Antivirus
is someone plz make me understand?
I followed exactly the tutorial. Honest.
please
Waiting reply asap
In principle waiting response from one who created pictorial.
Not cool
Just missing some words in pictorial.
Pictorial and must be understood by those who have little idea of CLC-s
Thank you again.
Regards,
@g9bahh: Do not know what to say because I have not encountered such an error.
I do not think your error happened because you put into practice what you have seen here.
Try to format with other software and then take it again.
Know that a DMC factory can be broken if new does not mean it should work.
In the future please do not be ironic.
What we do here is called pictorial, they are video tutorials.
For Cristi_admin
Waiting more advice on how to install WinXP on the Memory Stick. I have one of 8 Ga. I do not know whether my CLC is okay. I said I have Symantec antivirus. I do not know if it's because of this. Maybe.
I believe that Xavier's comments are taken into account. Tutorial for me I understood. I managed to put XP on it. Maybe my fault.
Again!
Regards,
g9bahh
I wanted to be ironic I wanted to punt video tutorial.
From my thousand apologies.
Regards,
g9bahh
Waiting for guidance,
Regards,
g9bahh
@g9bahh: Do you hear about patience? Do you think we are non-stop on the site to answer you? the question was answered once, we don't have your stick so we know what's wrong with it… if it's good or not… understand that there may be manufacturing defects !!! It doesn't matter that your stick is 1G or 8, it has to work… that it didn't work for you, I don't know what it can be !!! Uninstall that Symant with that dust anyway and download the archive here from the site and put the windows back on the stick… if that doesn't work either e what do you want us to buy you another stick? There are no solutions for anything… plus we are not there… the best solution to your problems is you, researching, finding!
@g9bahh: 4000 people watched this tutorial, most were successful.
The tutorial is done right because in his time I actually put Windows XP on the stick, which I then installed on a notebook, to know that I never pretended I even put a stick xp if points out something you do not think I can help you.
You must have an aggressive firewall makes decisions without asking you sincerely recommend you get rid of Norton guy or what the sheep have.
We have some tutorials about Avira and Zone Alarm firewall, both of them free and very good.
I don't think anyone can help you with your problem because there are so many variables that we don't know… ..
Be calm and try to uninstall security but before you do a backup, then I think it would be good to check on another pc stick.
I installed daemon tools pro and made a 15 virtuale.Problema images that I found it, I do not know if it has to do with daemon tools is that my computer does not see the stick when you enter in usb.Va kindly help me. Thanks a lot.
@Cochin ovidiu: Try it and put it on another pc it probably broke… it's not good anymore… if it works on other pc it means it's your problem…
@Cochin ovidiu: Maybe you want to say that you have set up about 15 devices (virtual CD-ROMs) If that's the problem… or assign all the letters for the devices to those virtual devices, and as such the USB stick has no letters left! Insert the stick then right click on my computer then go to manage and go to manage and click on disk management, if you see it there right click on it and choose change driver leter and paths…
Thanks for answer. The stick is good, I put it in another calculus and it works. That's how you said I set up 15 devices (virtual CD-ROMs). I right-clicked on my computer, properties, hardware, device manager, click disk drives, here he sees the stick but when I right click on it it is not change drive leter paths… but only scan for hardware changes and properties. I went everywhere here and I can't find anywhere where change driver leter. Sorry for. insistent and thank you for answer.
@Cochin ovidiu: Do you feel forgiven for giving me the hell to put 15 devices? What the hell do you do to me, brother? can't you get 3? you put 15… for what? what to do? To mount a game that is on 2 or 3 CDs, all you need is a friend device, not 15 !!! Uninstall and daemon leaves only 1 device…
I knew you'd ask me what I do with a baby 5 ele.Am years and I copied from the apex some games that are made imagini.Aceste games are ptr magazine. children Reksio loleck and Bolek and many altele.Problema is that it has so many that I had to install daemon tools pro who can do even uri.Daca 32 of devices when not playing by his bag out and another image , so I have tried to unravel the toate.Am image and copy its contents copied but usually do not go giving me some kind of error cyclic believe is protected or do not know why, or you can copy the content but the game starts.
How partitioned HDD??? PLS
@and: Write up to search hard partitioning or just partitioning and give enter… write up on the right to search what interests you and you will find… there are 3 tutorials on this topic
I did everything but the problem is when you choose where to install Windows partition I just stick appears (I'm not c and d). dc?
good people how do I find the RUN window or replace it with any function if I have windows vista ……… in the start it is not found …… ms in advance… ..
...
@haosss: Click Start and in search write this: Command prompt, enter you right click on command prompt and choose Run as addministrator shortcut menu, and you can give commands tutorial!
WHY ARE YOU STUBBORN TO USE VISTA, WHEN EVERYONE USES XP? JUST COOL? AND THAT IT HAS ITS GHITA? WHAT DOES THE VISTA HAVE OR WHAT CAN THE VISTA DO AND THE XP CANNOT DO? AND XP MAY HAVE SUPER THEMES, LOGG OFF OR LOG ON SOUNDS LIKE VISTA, AND XP CAN LOOK FOLDERS LIKE VISTA… WHAT IS MOST VISUAL?
@ Adrian:
so: the pc I have at home I have win 7, on my laptop I have win 7 RS, and I asked you because my father saw how my laptop works with win 7 and now he wants me to change it too SO's LAPTOP [vista with win 7], and since I'm not at home I don't have a cd-dvd, I only have a USB, and I didn't know how to RUN….
MS FOR ANSWER ……
FACETZI OR TRB SUPER…. even dak XAVIER and AEROSOL criticized you do not take them into account …… ..
BFT
thank you very much …… .now i did a recovery scick and i try it. I hope it works ,,,, it's very helpful anyway for those like me who don't know much.
BART PE can be used instead of Windows? And if so, is there any difference in the steps to be followed?
A STIK want to achieve Bart PE and have no idea how I could solve this problem. If you can answer me via email or HERE AN VIDEOTUTORIAL not necessarily.
Thank you and I owe SIMPT for how much I learned when I discovered this site.
I would like if possible to give you some ideas of tutorials or why not if you accept you and I can perform to publish (it's more applications that we have discovered alone and I find FF. Practices and GENERAL INTEREST)
PS NOT pay attention CHIBITILOR (CEI commenting what is good and what is bad) if they do not like or to back off bone nor put to work they may see how much work required a VIDEOTUTORIAL, but so far no other reason I have not found anyone who can correct things or improve his VIDEOTUTORIALUL explained something extra.
call me go I says:
Couble not map partitions to The Associated driver volume device objects:
Access is denied
Nuhs what to do… if you know someone send an email on [email protected]
I know what filming schedule
I'm not saying mimanui
Super hard video tutorial !! I did as you showed in the video tutorial and I finished making the bootable xp on the stick but…. Unfortunately I can't install it in the computer I gave settings in bios but nothing !! can you help me ?? I have usb-fdd, usb-zip, usb-cdrom, usb-hdd in the bios. I also had to have another usb….?
IT'S OK… SUCCESS TO EVERYONE ,,, THANKS…
Ionut stick you use it as boot the boot disk is not on the CD or DVD.
I mean the BIOS and set to boot the not Stick primu HDD. I can not explain to you exactly how to make each motherboard has its BIOS.
I've done my job yeah I forgot to thank the authors of this article and tutorial amandorora years.
PS Mia came first and I had no doubt that I will not get it right.
Hello,
Thank Cristi.Esti tare.Nu a lauda.Este constatare.Nu getting into a debate with whoever he wants to ruin something bun.Putini people do what you do to explain in a simple way how to solve big problems PC. Keep up the good work.
Respectfully
Again welcome,
Nobody is born invatat.Toti learning and inspiration from somewhere.
Poi and mi how to call that setting k r my first stick boot?
Hello And if you boot from the stick get the error Could not biosinfo.inf loaded. What can we do?
@Sacal_ul: You need an untouched nLite unmodified ISO image, a "clean" windows is looking for another ISO image, try another one…
Nasol, I noticed now that in the first part he can't find them, so I try to make the bootable CD with something. There is also a variant to put on the stick of the Hiren's package. Any tips?
ok… I installed it on the stick… but how do I install it?… I went into the bios and I wanted to boot the first stick… but I can't because there is only dvd-rw… how do I put the first stick? so i can install windows on it… I'm waiting for help… PS what a cool site: D
Who's to me I can install Windows XP on Asus EEPC I'm not good and I think I got the virus did not enter my windows, pay course
For everyone who asks how can boot from the stick even if you have the option of selecting from bios proceed as follows:
1. with intodus stick in one of the computer USB output is started
2. key is pressed and there F8 amazing to see that occur or USB boot device Versatile bases
3. select it and ready to boot
(If it does not work please look, more information on this issue, the specification of each tile google basic keyword search)
Hi Cristy! I very much appreciate the work that you put to us the less skilled. I tried to make my bootable USB stick I stumbled phase sticku's formatting. When you stick formats gives me a format error without explanation. I have a usb Fusion Plus 8 Gb. Kindly help!
I salute you and I start giving bottles reformats the 100% Crashes
what is it?
SUPER TARE.Eu with this method I managed to install on SD card 2Gb. (Slower, but it worked ..)
And I read the article from Chip, and now I understand exactly.
I think the idea is very good.
sal phase F8 incerkt Sacal_ul I still do not get why fk? k goes to install Windows?
@Ionut: Brothers should not come in mini boot menu that the F11 or F12 but then go into the BIOS Advanced BIOS Futures or giving you enter Advanced BIOS Setup options to set him on what Windows boot CD-ROM, HDD, or USB, the USB will not see it as but a USB HDD, I have used as a stick MP3 player and I saw the HDD Audio device, because it was a mp3 player, there should be set, chicken primul.O stick to have something like 1 st device: or 1 first device, or boot priority, the names vary from board to board, they then 1 st device must be set to stick, please enter the 1st device or 1 first such device or write to you then you go up and down arrows on the USB and press the plus key on the right keyboard primu to get up! Give F10 to exit and save, I ask you, do you want change settings? and puts you to press Y or N adik YES (yes) or NO (no), press Y and hit enter, it will automatically exit BIOS will automatically restart and give one to boot from the stick! SUCCESS!
I need a little help, after I choose 2 "GUI Mode Setup Windows XP…" it appears to me "Windows could not start because the following file is missing or corrupt: \ system32 \ hal.dll. What should I do, I followed the steps right here…
@Then: you are missing hal.dll, or the ISO image you are using is not good… look for an unmodified one with nLite, without drivers included and software you put in it…. look for a clean image too…
It was made after an original xp cd with ..
I tried after 5 CDs, original or pirated. Perhaps I'm wrong somewhere. Can someone help me?
@Then: More attention to the tutorial… we have no way of knowing where you are wrong… pause the frame when Cristi shows the window with the files you need to have them in the folder in C, and look at you to see if you have them exactly like that and named the same… I failed the first time, although I was sure I did in just like in the tutorial, but I had pasted one of the folders extracted from the archive, where it should not… and I said the same to put on pause to see if I have to same as Cristi Folders, number of folders and files, and if the names are the same…
Well I entered the BIOS by pressing DEL!
Hi… first of all I want to say that I watched the tutorial twice I read many of these comments .. I followed the steps just like in the tutorial I put on a 2 GB Usma Kingmax toot .. the files were copied without any error . Ok .. I put the USB stick on the laptop I want to install windows on, I restart .. press F4 (this is how to enter the bios settings) on a Benq laptop I enter the bios I go to the Boot device and I have this: USB FDD, USB KEY, HDD (laptop hard drive), DVD writer (which is broken and I can't use it) and so on… Right on the HDD and DVD appears the model which is .. DVD-Rw bla blah blah .. HDD blah blah .. but to USB FDD and USB KEY .. nothing .. I tried to turn to 2st boot device in turn .. I give F1 .. and in vain… it does not boot .. please help me. Thank you
Who can help me with the installation of xp, I mean "physical" help. I was damaged unul.
Thanks Cristi for videotutorial. It's my first day here, to me it looks super site. Even if you do not keep your merits, to know that I thank him for videotutorial know, it's much easier that way.
Sorry for double post, but I saw that some people complain that they do not come out. I did just stick bootable tutorial works perfectly. Thanks again Cristi.
AleX20
F2 when entering BIOS at boot
SEE YOUR THERE MUST BE IN PLACE 1 USB KEY CARE AND move it by pressing F5 F6
PS. My opinion is do your get a CD-DVD from someone and to boot from CD DVD LAPTOP kick back slightly and I 2 the screws and so BENQ CD-DVD DUS Tried this version and do not go I guess it sticks ARE THE COMPANY TO COMPANY, AND NOW CAN NOT BOOT FROM CD OR DVD
salut.se can put windows vista in the same way?
salut.se Windows Vista can be installed through this method?
@ionut2636593: Look in the comments above for Fanibu's… he explained how to do it 😉
I have a partition called "bios", I have never seen anything like it before. Can it be related to the bios or can I delete it?
NTRL is missing.Daca this error means that you have not deleted all hardul.Trebuie to wipe the bios as you go.
@Then: I don't think it has anything to do with the Bios… give more details… what do you have in it? what does that partition contain what kind of files what name do they have…?
@catalin: NTRL has nothing to do with the BIOS! It is a file that is part of the root of the Windows boot manager! Can be many causes of this error, a CD nebootabil or improperly burned,
To get rid of these steps follow the steps:
1 Type the Windows XP CD (to be bootable) in unit
2 Set the BOS to boot from the CD-ROM and when the message “press any key to boot from the CD” appears, press any key to boot from the CD
3 Windows Setup will start and when you see the message “press the“ R ”key to repair Windows” press the “R” key
4 You will get to the Windows "repair" console where you have to give the following commands:
copy e: \ i386 \ ntldr c: \
copy e: \ i386 \ ntdetect.com c: \
NOTE: The letter "e" is assumed to be the letter assigned to your CD-ROM
After spouse files or copied CD from the drive and restart you
So has nothing to do with the BIOS and must not delete any BIOS to fix it!
Asus eeepc 1000H has several parts in linux xandros, one of them has the bios. I installed windows on eeepc 1000h and "ntrl is missing" and "Windows could not start because the following file is missing or corrupt: \ system32 \ hal. dll ”only appeared before deleting the bios, no matter what type of windows xp I used sp2, sp3.
@ Adrian if you have not seen here speaking to boot from usb stik and not the improperly burned CDs or Nebuta.
@ Dan delete and bios and it will be good, and they gave me the same error.
Because of that stupid partition could not install. Thanks
@catalin: If you want to put Windows on a laptop then you need to disable the driver or AHCI BIOS we also have a tutorial on this write up on Search AHCI hit enter and you will find the tutorial! So if you want to put windows on a laptop by whatever method it's vb stick or bootable CD that must integrate drivers into Windows with nLite and then make it stick or burn bootable CD, I suggest you look at the tutorial recommended above!
So I did not receive any relevant explanation for my post above… I ask Adrian or Cristi to clarify me too ..
Again I say: I put the USB KEY to 1st FDD to USB boot device and boot device 1st .. and nothing in any .. I tried with an external optical drive (external DvdWriter) try to format / install Windows .. but just did not recognized in bios. The same unit Oprica I managed to format a notebook optical drive is built with .. the l `acl laptop bios dvdwr recognized the external, but not my laptop. WHY? can someone help me?
@AleX20: If you get on the site 100 IDs not to answer someone soon
Yes you did not work either with external cd-rom then I doubt the quality of your web WIND or you can come in bios and AHCI deselected (this where you want to install Windows XP), if you install Windows Vista it is not necessary to make this setting.
May I recommend you watch this video tutorial again carefully and safely without getting angry will reuseti
If functioned tutorial should work for you too
Good luck
so… I didn't enter with N nicknames to be answered faster .. I only did 2 posts with the name AleX20 .. this is the 3rd… I don't see what the XP version I have has to do with the fact that the bios does NOT see the DEVICE .. either it is the variant presented in the tutorial .. that is from the stick .. or from the external CD-ROM. They are simply not recognized in my bios.
PS: stick is made ready for Windows to be installed on it .. complying with the steps from there .. `I did it right 2 times different sticks until today and totdegeaba. BIOS does not recognize the stick 'and no external optical drive.
@AleX20: New laptops contain components, the new generation is a windows xp old! and does not recognize the newer components that you do not go! Write up on the right page Search: AHCI hit enter and watch very carefully that tutorial and you'll understand more why do not you go!
but you tari.mersi
Yeah..It took me half an hour to read all your comments and quarrels… b- (
I have the same error: Windows could not start because the following file is missing or corrupt: \ system32 \ hal.dll… blah blah..yes, I know .. ”search up AHCI” ..and what to do with it? where else can I find out what type of motherboard I have, to look for the drivers to integrate them in nLITE..etc ..?
So I broke the old WinXP, which went .. to install anything in place of X-(.
The main culprit is me! why? Stupid .. they are .. =)))
The BIOS section of FIRST BOOT what kind of USB should be:
USB-FDD,
USB-ZIP,
USB-HDD or USB-CDROM? Thank you.
@costyn: USB-HDD so you must have set!
Hello friends…
I tried to do something like that, when formatting my stick gives me an error 🙁 it reads as follows "FormatEx Error [11]: An Error Ocurred Formating the drive." .. I use Apacer 16gb. Help me with this problem.
Thanks in advance!
Thanks again, Adrian.
REMEMBER
You have no idea how much nerves you made me to the scoundrels…. Make a damn site (if you think you're smart) work MOCA how these people work here and may God come to you only…. (No I also say that it's not beautiful) and to comment EXACTLY as you comment: "on another site it was simpler" "beyond it was different" and all the kkt of words thrown away and thoughtless. How do you allow yourself to make statements that the "boys" don't know Romanian… .what the hell do you want to prove… .what the hell do you think is being learned on this site, lb.ROMANA ??? Do you want to leave a thank you comment… or one with a FOUNDED criticism… if something is wrong… please you… (both are welcome-like no…. Nobody is perfect)… but don't come with KKTs anymore - please think big smart!
Cer scz. - but it's a bundle of nerves after I lost 1/2 hour to read the comments from "How to install windows xp from a bootable usb stick" - because I don't have an error like nicolae
July 12th, 2009 at 19:40 ”-gen“ FormatEx Error [11] ”- probably the stick is to blame. I can't even stress the world here with a little help - how aberrant you are ( carcotasilor) it's amazing how the world is not allowed to do MOCA tutorials. O vb. Hi you are not able to add i although many of you have learned… many here. Once again scz. and know that you "video tutorial team" are worthy of appreciation for. what you do. MULTAM 'FAIN pt. ALL!
before we used windows 6 sites, I followed all the steps exactly, I used SATA drivers .. so, brethren not work!!!
Possibly erroare somewhere that nobody knows why and how .. yet .. but the tutorial is excellent for error responses do not see.
Nobody knows why give such error!
@Pro_to: I'd gladly story and about the errors, but I have not met before.
The same tools you've used and I would not be from them, the remaining operating system, yours probably has some bug.
Also important is the order in which applications open and close and when they launch.
You must also consider security that usually uses jazz firewall.
Cristi honest .. I exactly the same as yours in the tutorial windows .. so I walked in he nLITE with anything .. do not understand why I do not go.
One more thing:
I have an ACER ASPIRE 5315
CPU: Intel (R) Celeron (R) CPU 540
I entered their site, I downloaded this driver: AHCI_Intel_v7.5.0.1017_XPx86 AND Chipset_Intel_v8.3.0.1013_XP86, I integrated the first one with nLITE, Chipset… I didn't succeed… in the end..I can't find other drivers on their website!
If anyone has idea where and what drivers must download exactly, is super cool begged him to tell me (give a crate of beer)
Ps: Since everything appeared tutorial I tried to cheat and fail, so do not ask for help without being tried.
Multzi!
So I do not recognize USB stick. I tried 4 types and nothing sticks. I do not recognize.
@cosmin: who doesn't recognize windows or BIO, doesn't your bios see it? details man… dane details that we can't guess the stars here !!! Without details we can't help you !!!
So I start usb_prep8, then press Enter and run the PeToUsb program (which from what I've noticed should recognize my USB type). But it tells me "No USB disk found". I tried with 4 USBs (1,2 and 4 GB, all different companies), but nothing. I installed windows 7, with the possibility of running Windows XP from a Virtual Drive XP. I also tried with Windows XP but nothing. What should I do. I said to buy a USB Kingstone Data Traveler 2 GB like the one in the tutorial, to see if it works. I used a 1 gb one.
@cosmin: I advise you to use to do this on windows… adik to be on a real windows not virtual !!! I don't understand you with the 7s, it wasn't even launched… it's not worth keeping as a basic system… it's an RC… put your brothers XP and don't complain anymore that won't work the other way nu you don't know what an RC means or a beta? here it is: instability, errors, unlocked code and exploitable security holes, incompatibilities with some software, bugs…
Cosmin I think your problem is that you didn't run as administrator… you opened directly; I also tried to do it on vista and it has to be run as administrator, otherwise it doesn't recognize your stick.
It was useful tutorial, it worked and I shared with friends.
Thank you!
Thanks I needed a mult.chiar xp `p stick.mi came first treaba.numai well.
Not working. When I select the path to the USB stick, which is (C :), it says "******* C: is not a valid drive *****". What do I do to them?
I have to admit, the tutorial has a very good idea, but it is very badly written .. that's not how the tutorials are made .. friend, look at a few other tutorials and learn to write one with instructions that are as VISIBLE as possible .. maybe because it's 3am and I have a problem, my eyes are closing, anyway .. it would be good to write as simplified as possible…
- with a dash
- for every step !!
Regards!
I agree with you, there's always room for improvement, always trying to improve how we achieve these tutorials, unfortunately we do not focus solely on text entry, point of interest to us is the video tutorial that I think is the meaning all, quite a few visitors were able to successfully apply the method in the tutorial, do not see why you would not too.
You may not have followed the tutorial carefully, trying to follow him once, maybe you were still a little tired at that time, which is why I think you have escaped and the two letters that I've deleted, just because I was sure you would not write them.
Fatigue knock fault.
You were waiting for us with suggestions or complaints, it would be bad if you come back with the final result, tell us if you succeeded or not.
It's a little odd that you say, usually C: is the hard disk or system partition (the one that is operating system) if you have multiple partitions so I say closer look
Hello, super video tutorial is best, goes perfectly, I took a stick 1 gig, I put Windows after indications of your and surprise goes perfectly, although I was certain firms through town to show me nor take no knew
To say that you want something when you give something in return or when the site will be with money, until then, is a free site and the correct formula was: "Please if you can make a tutorial about Linux on the stick" Finally… this is your respect… to know that tutorial for linux on stick there is only that you did not look for it, see that it is a box at the top right of the site write in it "Search on Videotutorial.ro…" write there linux or linux on stick give enter and you will find the tutorial! Success!!!
RUNS VERY WELL
By the way, THAT Nicolae ON ERROR WHEN MI DAT crashes and I REMOVE stick and still find him already.
BAFTA
I walk in run (cmd) and give to write bootsect.exe / nt52 and stick it in m:
I say that bootsect.exe is Recognized and do not know how what to do?
Yes Play the tutorial and watch it, it's video, in Romanian, with sound… what's so hard to get after a video tutorial in Romanian ???
I looked at the tutorial once again and I managed to do it… but when it boots and I delete the partition where I want to install wind… adik c tells me that the files were not found on the install… it will be blame wind or what to have… ms anticipated
time a file is so right?
and to me it takes more than 2 hours before.
Yes it is a temporary folder, it's normal to be so, for taking so long as you have a slow stick, stick thin and because of this, has a very high speed writing and reading about it taking so long!
may change board cd in the cd-rom dvd rom?
Honestly I did not understand any of your question, what you want to do? Please be more specific so we can help you!
Hi. You can change the logic in the CDROM with one in the DVDROM, but you will waste time in vain because it will not work: it is possible that the data ribbons will have different slots, the design of the board will differ and you risk not working "Language" of the CDROM, etc. Finally, there are several characteristics that you must take into account. Well, think logically: why bother with such a cheap improvisation (not to write otherwise), when you can buy a dvdrw Samsung with 90 RON, plus you have a new one and you have a 2-year warranty. Or look here: 22xDVDRW + Lightscribe Bulk Black + Nero at 100 RON.
help!!!!!!
I sh yo problem .. I followed exactly the steps and all good and ok. .. Windows installation begins to copy some file .. and then obviously the next restart.
And here is the rub, instead of continuing where he remained receive the following message:
Windows could not start Because of a computer disk hardware configuration problem.
Could not read from the selected boot disk.
Check boot path and disk hardware.
What does it have: (.. .. I tried to give it F9 (but it starts again) F10 (enters Bios) F11, F12 (NEt Boot). Nothing works…
what do i have to do… please help me
PS: the object of work is an HP 2133-adik a small thing of that 20 × 30 cm, without CD-ROM (obviously, this is the model)
Hi, I can't do it… I reviewed the tutorial 10 times, I did it step by step everything goes well until I have to show it the way to the mounted iso file. There it gives me an error like: Can't find script engine "VBScript" for script "c: \ usb_prep8 \ u_script \ FolderSel.vbs", meaning the search window does not appear.
Does anyone know where is "sore"?
Thanks.
Install your Java Runtime Environment and Net.Frameworck both are free and you can find in google, download link for the tutorial we also Net.Frameworck with CDBrunerXP. I said above Install reboot the PC and then try again to make bootable stick that tutorial!
Thanks a lot, it remains only rezolvat.Acum not try installing an Eee PC (ASSUS 901).
I'll come back.
for AleX20: you looked in the bios, you didn't deactivate the USB "slots". That's in case he doesn't see your stick either…
After the write command bootsect.exe / nt52 h (bottle usb has letter h) I write this:
“Bootsect.exe is not recognized as an internal or external command, operable program or batch file”
Why?
Someone help me?
Beloved, I read / watched the tutorial and I do not go. I do not mean temporary copy of that image on the stick. Why and how do I set formatting in usb_prep8.exe That and nothing. Stick is formatted but not copy anything on it. Mention that use Windows 7. (Do not see what bug could be because of it)
Pls if you know how and why give a reply. Ms anticipated.
Later Edit:Marcel archive 2 bootsec must remove those files and copy them to the folder USB_PREP8.
Mr. Adrian, I want to argue in terms of W 7, because of my sect that Windoze and Linux user I find the best of the best. Even RC. I am familiar with all version of windowza (I specified do not think I'm any tyro or tilicar by step as baba machine gun). That offtopic. Besides, as I posted above a comment and I do not copy anything on the stick after the "Start"-final.
I tried this method on Windows 7 and works perfectly, probably using the Windows version and build 7100 RC that has yet Bugg's, I've tested this method to make bottles with a Windows 7 7600 and went RTM Build All perfect.Foloseste a clean image of windows (I mean the one that you will put on the stick, not to be changed by software or drivers included)
will erase all data from the computer on which I put on stick Windows?
make a tutorial with VNC
If you are referring to TightVNC, know that we have had a tutorial on this software for a long time. To find it, write in the box "search on videotutorial.ro…" at the top right: TightVNC enter and you will find the tutorial!
Hi Cristian! I have a big problem with a Fujitsu Siemens amilo pi 3525 laptop. I can't install the xp on it. The problem is that I didn't find my motherboard at fujitsu and I don't know what else to do… .I don't know where to get that ahci. Please help me with a link where I can get what I need to insert in windows so I can make it run on XP.
Thanks, Stroe
make a videotutorial and how to install windows xp with BartPE
It's already been done for a long time, write in the box "search on videotutorial.ro…" from the top right: BartPE give enter and you will find the tutorial!
Hello,
I have a problem.
I did stick with XP as in videotutorial.
The problem is that I do not see it as bootable. Please help me.
I set the BIOS removable device, but in vain.
Wait for response and email if possible. ([email protected])
Thank you in advance.
You go in the bios to "Hard boot disk priority" (with the stick connected to the PC) and you will have displayed the hard drive (s) (if you have more) including USB-HDD or HDD-USB, with the "+" keys or "-" you put it to be the first from above.
Many thanks for the tutorial, you deserve.
Thank you very much.
I solved the problem.
We and install Windows on the stick.
It's Ok. Only after court ends 100% does not look to select user and all. (No window appears not set the date and the rest, when it's on the 34%).
Thanks again
Yes stiku ec: \
How do?
Queries if I have a usb stick gb 4 put a bootable xp can store and something else on it but also to boot the xp?
Good evening.
I'm sorry to bother you but I have a request to you.
We covered all the steps to format the stick (stick is the 8 gb), I found the stick and when I click on start to ask me if I keep them I click on yes and yes certainly want to keep, starts formatting when it reaches close 100% gives me the following error: Error on ToUSB! Formatex Error [11]: An Error Ocurred formating the drive.
I `ve looked a little over the comments box immediately after this error to see if someone has my problem to only bother me with this message, and I saw no one, can not I looked good. I apologize if someone posted a message yet and I do not like I've seen.
I tried to repeat all the steps from the beginning error occurs. I wonder at what fi.In hope that you will help me Thank you very much and I'm so sorry to bother you. I hate to bother you because I know you are busy enough as it is but this time I did not even realize what can be, because we have not had problems with any program.
I'm not going to restart. I mean all I did stick with the steps you wrote and I selected USB-HDD boot priority and I did not take it.
He writes me “Verifying DMI POOL DATA… then goes to logon screen 😐
I made a USB stick to boot win.XP sees to the correct time when you have to defend my windows partition setup exactly when it occurs, there appears to me a BSOD, I tried a few friends and go perfectly loaded win XP BSOD does not appear that I have an intel motherboard 865 PEARL be due motherboards wait respuns email.
Hi .. I also have the problem .. I did exactly the same as in the tutorial above .. I have a 2 GB USB stick (Apacer) and I put windows SP3 on the Stick .. but it doesn't stop me from it… or e possible to be from PC? I have an “intel core 2 duo e7500 ″” motherboard: Gigabyte GA-P43-ES3G ”“ video card: NVIDIA GeForce 9800 GT (1GB) ”but I don't think it's from him .. I entered the Bios..am entered from what to Boot first but find only:
: LS120
: Hard Disk
CDROM
Zip
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
and that's all ..
Please help me if you know
Yes restart the pc and hold on F12 until you enter fast boot menu, then in the list that appears below the arrow go down the + HDD then enter all the arrows you go on your site name usb, you Enter a restart to give yourself and stick to boot if you did well that tutorial. to the Windows installation modules choose text mode
Thanks “adrian” I managed to do… aku I am going to install it;)) ms ms ms to live 1000 years;))
I want to know if you put more software… on the stick still sticks? please
Hi, I'm still there 😀 I have a problem again .. so .. when to install the installation on windows a thing appeared "setup connot copy the file: flash.inf" I skipped the file .. but said -windows may not work properly .. and I don't want that..I'm fine at the moment .. but how can I solve the problem with that file? thank you..
saluater I have a big problem I made bootable bottle goes perfectly smoothly windosul I installed after installing all the ends and pull Stik gives me the following error when starting Tracing Error loading operating system will not boot I thought the HDD but it set to boot after hdd say I want to win an Asus EeePc put 701
PS: It works perfectly with Stik put windosul and checked and hdd's heel and put him forward response windosul Self
Very helpful, thanks a lot!
If I copy the xp cd with the stick .. go? ie to make him either directly bootable?
Try and you, if you let us know and something comes on us as we struggle too as nonsense command line and stuff like that.
Maybe your solution will work better.
Kidding of course, if it were so that you do not think we were doing first?
I have an Acer One d150 sall I did exactly that but when put stiku videotutorial I appear like I ave 2 windowsuri car and asks me to run but if I give the laptop hdd Robel show that I c / windows.sistem32. hal.dll and if you give the stick imiapare like that would be a hdd install windows yahoo pls hel: gabiinterlopu
I use windows professional 7 x64, and I want to make a bootable stick with XP Home, I followed the steps above, but the formatting in 16 fat and give me an error and can not continue
That and the stars gicim somehow think? How do you get help if you posted the message we errorii to figure out what it is. if you're on Win 7 disable UAC (User Acount Control) and all those records made of them run with right click Run administering ass! And I have Windows 7 and I managed to make a bootable xp stick with the method presented in the tutorial.
and I encounter an error when I start petousb, and start formatting the stick, I get the error "Failed to set drive layout!" ; I want to say that I gave "run as administrator", and the stick is new, and is easily formatted in windows;
that the stick can not be good? after bag Bootsect.exe / nt52: partition, gives me Could not read from this volume the existing bootcode:
Das ist nicht GEROTA beer.
No bootcode was updated Successfully.
C: \ usb_prep8>
Somebody help me and me please ms
Take a closer look at the tutorial, it didn't work out for me either. If you make the stick on a Vista or windows 7 you have to run everything that is said in the tutorial with right click and "run ass administrator" eventually disables UAC, probably the ISO image you use is not good, it will be modified with drivers included, software, themes, etc. use a clean, unmodified windows.
I 2000 windows is his colleague and windows can calc.Se 2000?
First learn to speak Romanian properly before doing tutorials. Information is good, but you're disobeyed.
You do not teach Romanian language nor English, here is talking about IT, if you're not a snob please visit this site.
We conducted these tutorials for those who need hardware and software information, grammar and literature are taught in scoli.Dar can not you liked the school and visit various websites to learn to talk.
It speaks clearly enough for to understand the message of an absurd Tudor, you thought that Romanian, eng. appearance can be improved and mistakes are due to lack of training of language today.
First of all, I greet you with the deepest respect (both for your staff and for the work done by the entire staff). I am a "young" beginner in IT (but I am 66 years old-retired-) and I learned a lot of things watching your video tutorials and I experienced some (even successfully) for. Thank you from the bottom of my heart. Now comes my request, if you have time to give it a go, I have the program "Acronis true image home2010" and I would like you to tell me the steps to make a bootable DVD with the "C" partition .I tried after the video tutorial with the program "paragon" but the result is that the Back Up has ~ 6.5GB. I think I made myself understood. Thanks in advance whether you answer me or not.
CD / DVD bootable backup on it you can not do. The only thing Acronis Bootable Media of Acronis is a CD that allows you to have access to partitions and Acronis will not work when Windows. Neither Acronis will make him that much smaller backup. You say I do. Make Acronis Secure Zone (you talked about it in the tutorial) and keep backup C partition there. And if you have enough hard disk behind ASZ (Acronis Secure Zone) in backup set, when you get to set the backup parameters you want to make it, you can set the Acronis backup to share in equal parts to burn them to DVD or CD. Watch the tutorial about Acronis True Image 11 version (shown how to do this stuff), it's a soft old but it does Trabant as well.
Here method to a user, but I have not personally tested it works, I hope you understand what this user says:
Fanibu says:
March 20 2009 from 16: 14
Because I realized that missing some initial articl comment I wrote in Word and I repost with apologies!
In order to support those who want to make a DVD bootable with all the image with Acronis True Image and help Cristi following steps (I work with Acronis True Image Home 2009 ie var 12, much is made in principle and the other previous versions):
1. Insert a DVD 4,5GB _pentru XP or Vista GB_pentru 9,5 (the DVD-R buneVerbatim as Christ says) in DVD-ROM.
2. Open Acronis ...
3. Give the Backup and Restore
4. My Computer (create an image of the entire disk or a partition)
5. Let as show [with NTFS (Unabled) (C) marked and give
6. Leave the Create new backup archive, click search where DVD ... usually introduced by C and D ... press the Generate name and name as you like and then OK
7. Give the
8. Again
9. Full (Check First Options above)
10. Next
11. Give the Compression level and put down the last Options
12. fereasstra to backup everything in this place priority on
13. Now comes a very important ...
14. Below you will see the General Media components in the box labeled Place Acronis ...
15. Amelia marked boxes to Advanced
16. Next ... if you want to put that comment about which Christ says it's ok if you do not let it
17. Next
18. Give
AND THAT'S IT
PS Can I see the following problems:
Initially remove the blank (DVD) out ... do not despair, enter it manually and click OK
Will seek to enter a DVD aterminat writing if one partition
If I will 3 9,5 GB DVDs handy everything will be OK
When he finished writing DVD ... .dat reboot your PC to boot it appears and magically dialog with Acronis ... still do as he said Cristi
Good luck! ... .For Those who fail first for various reasons perseverance and patience always give results.
And dumitru32, everything is possible if you want!
Ooooo, I didn't know about that, honestly I was thinking of saving it on DVD, but when I saw that the backup has about 9 GB I gave up ruining the DVD in vain… 😉 Anyway, thanks to Fanibu for the idea.
I am pleasantly surprised by your solidarity with the "troubles" of beginners and the timeliness of the answers. Now I will refer to the comment Mr. Adrian (November 24 to whom I thank for the instructions given) if you want to complete the following paragraphs:
7 give the
8 again
12 .... put on
18 give
Please excuse me, but I want to correct. Hoping that I did not upset my multumirele will bring. M.Ionescu
Sorry, filling these points do not know, from what you have seen, I gave a review copy paste Fanibu given a user who has since been banned for uncivilized behavior and defamatory our site, comment belongs to, I just I did copy paste. He knows what he wanted to say to those subsections.
hello everyone,
someone tells me how to make a ghost image (made with Norton Ghost 2003)
bootable? esteem
I wasted my time reading all the comments, because the 2-3 people who asked me what didn't work out were not answered. The part with making the bootable USB and copying the windows on it is a breeze, just like in your tutorial and can be done with "n" variants. However, the problems appear after the tutorial ends (and it is valid for most tutorials). my opinion (and I'm not ungrateful) would be to do a good thing to the end. After formatting the hard drive, how many partitions is it recommended to have? (I have an asus eee pc 904hd). I made two partitions, all good and beautiful, it starts to copy the files from usb… and then as every time, it stops at 49-51% and gives the error: setup cannot copy the file: xptht04W.jpg (and many more ). in vain I give retry, if I give skip it appears that another one is missing (acelpdec.ax… 13codecx.ax… .vga256.dll… these are so few on the jump) so it stops at 50% and can no longer be copied to reach step two . My request would be to tell me what else I could try because I will throw it out the window. Your tutorial is very good, but incomplete (the name I see is "How to install windows xp ON a bootable usb stick - HD video tutorial" not "How to install windows xp PE a bootable usb stick - HD video tutorial" I'm sure if you answer me, you will clarify many others with the same problem.Thank you in advance!
The tutorial is pretty clear on the subject matter, can not do tutorials 3 hours, no one would look at them, for partitioning have another tutorial, we almost 350 site that addresses tutorials in various subjects.
To make sure you will not have problems, you must use an original Windows errors occur to you that you are because of missing files, these files are no grout as CD or ISO image installation have errors, I Windows XP installed on the stick without any problem.
Do not you think we make these tutorials, only to find the job or to get involved yourself, for any tutorial we study for hours, sometimes days.
I did exactly as the tutorial and installed without a problem on a Windows XP I used a few days without any error, this tutorial before.
If you have problems not because of me or someone on videotutorial.ro, I have nothing more to say, I can do a tutorial in 15 versions once for Acer Aspire One once and for eeepc etc.
And can also stick is not so good, are very many variables which videotutorial.ro website can not control and do not assume any responsibility.
In the comment field are uni who got others who have failed, those who have succeeded as you think they did?
Thanks for the reply! I tried 3 different sticks. They are bootable, everything goes perfectly until it is copied from the stick to the hard drive (50-51%) and then it gives the error that something is missing. Windows runs smoothly, it lacks nothing, I use it without problem on my computer. I tried in all possible ways and we hope there will be some "chichita" that you will have encountered when you did this tutorial and of course others. Someone managed to turn his head (I quote: "I struggled a lot to install win on an acer aspire one. To succeed tick" fix boot.ini "so it will look like it can't find I don't know what files, and does not start ”) but does not give explanations to help others more ignorant. That is, I hope to get an external cd / dvd. Thanks and sorry if I bothered!
Man, don't give up !!! Don't be so sure that that ISO image "works" or that it's perfect !!! It is only apparently maybe, but you see the important things and how good the windows are, you only see them when you start using it for other purposes in more delicate operations like this. What does it cost you to try another ISO image, haven't you heard of torrents ???? I didn't understand what exactly your problem is, you can't make the stick or make it but you can't install the windows on that bootable stick on your laptop?
It's the windows I've been using for 1 year and something without any problems (sp2 student edition) I tried with a media center and another xp pro, at the moment I rubbed it so much that it appears to me after setup is loading files , to set up windows xp now, press ENTER, to reapir… to quit setup… F3… .press ENTER = continue and BSOD appears immediately - the problem… ntfs.sys, below PAGE_FAULT_IN_NONPAGED_AREA and below all ntfs.sys - address F7211CB0base at F7C2000, Datestamp 46dff917) Until now we went in and formatted it to copy the files from the sticks, it reached 49-51% and then error that something was missing. Now I don't even go that far and I die in spite of it. I hope it can be rebuilt with a windows on an external cdrom, otherwise I was damned! I thank you for your attention and know that I did not want to be mean but I go crazy seeing that only a few have my problem and no one knows / answers. Anyway, thank you and I wish you a pleasant evening!
I forgot to answer your question. I made bootable sticks (3 in number), the tutorial is excellent in this regard, my problems occurred during installation.
I want to register (on DVD) is? and how.
eventually was faulty ram. I struggled in vain. If you encounter the same problem as me, check your ram! Have a nice day!
And how did you know it was your RAM?? How did you found that?
I went to the service and after hours of trying 5 they replaced the ram and it worked!
thank you for this tutorial
I knew the site but it did not work all day and I struggled to other websites
How'd I did videotutorial.ro bootable windows in 5 min
Thank you again
Hi… could you help me with a test? I'm going to watch these tutorials on the site but not until the end… at some point it stops and starts from the beginning… I would be very grateful daka send me an email with the solution
Has something if I did not stick format with PeToUSB site? I 8 gb stick and fat16 not stand over 2gb.
yeah! 5 minute clip stops at: 26.aveti problems or have trouble I. pc???
I 16 GB stick. And I can not format it `FAT16 .. How it works in larger sticks?
I tried stiku I do not understand why bootabiil but keeps asking me for my product key for xp cd key.am not tried many variations but all face.va so please help me if you know what settings should be to not defend key!!
eventually I solved problema.pt those who use this software first and then read the grasping of treaba.mi HELP_INFO took some time to do it properly stick with Windows on it but we managed !!
Hello
First I want to congratulate you for the work you do. It is a lot of help. My problem is that they fail to follow some tutorials to the end. Thank you. I wish you Happy Holidays!
My tutorial stops and please think of us who want to know more about the programs, I often look at your tutorials and tinotio as well if you download it would be very good?…
HELLO, I LIKE THE TUTORIAL AND I WANT TO MAKE A BOOTABLE STICK FOR MY LENOVO NOTEBOOK. I FOLLOWED ALL THE STEPS DESCRIBED BY YOU, BUT YOUR TUTORIAL STOPS AT MINUTE 8.00… HOW TO DO OR WHAT TO DO NEXT TO SEE THE FULL TUTORIAL, OR WHAT TO DO ABOUT TO FINALIZE MY STICK SETTINGS ??? I WANT TO HAVE WINDOWS XP ON IT.
THANK YOU IN ADVANCE.
Very cool site, but you ask teas Mr. Cristi to make a tutorial video showing where to download fifa 2010. Waiting to see if you can do this videotutorial for fifa I need and do not know where to get it. THANK YOU! ! !
Unfortunately we can not help. downloading music and movies is banned commercial software let alone show how to do this. However advise you to look though THIS tutorial, more than that we can do for you!
It's everywhere, you just have to look! We have a lot of tutorials about download methods, use the "search on videotutorial.ro…" box at the top right, write there: download, or download methods, how to download movies, or movie music, how to install games correctly… give enter and you will find the tutorials
You may also be interested and THIS tutorial or THIS and you can watch and THIS (click on the words "THIS" and "THIS" as well as in my comment above, by clicking on those words you will go directly to the tutorials)
ok, thanks, I received the entire tutorial by email. I confess that I managed to make the bootable stick with windows without creating an image with daemon tools or magic iso or nero image, but I indicated the source of the windows directly to DVD-rom (I put the CD with windows in DVD-rom and then I indicated the source at the final settings). However, I would like to know why an image of the windous source must be created, because in the final settings an image called "T" is still created… I was wrong somehow, is it good what I did? One more thing, at the end of installing windows on the bootable stick, a message appeared with the name change from bootable stick to something else bootable and it asked me if I wanted to do this operation, and I gave ok. Is it okay what I did?
How do I get all tutorialu and I shoved the stick I gave windosu to install all well and good to me after I restart I did install the drivers installed and pulled sticku
only the problem that without locks stick at a time
I DID THE SAME WORD AS IT WRITTEN IN THE TUTORIAL AND I WAS NOT ALLOWED TO INSTALL WINDOWS, BUT NOW I CANNOT FORMAT STICKU (PRACTICALLY IT CAN'T FIND IT IN CALC. EVEN IF I PUT IT) HOW DO YOU FORM IT?
sal, my problem is k windowsu is not installed! when the partitions should appear it tells me k: (setup cannot continue, press f3 to quit "
I happened to like the other CDs ....... dc????
say k 160 gb SATA I hard, av8 board, AMD 3200 +!
more please help me!!!!!!!!
thank you in advance
You probably have a motherboard and a more "exotic" hard drive and it doesn't recognize your sata, you will have to integrate the sata drivers in the windows installation kit, or maybe the cd you are installing is burned at a very high speed (you have to burned at the lowest possible speed) or maybe your hard drive has badges, give a scan with hdd regenerator, a software you find on hiren boot cd, boot with it and you have more tools (tools) for hard drive, tests ram memory etc etc…
If you can not look you integrate sata drivers HERE a video tutorial (click on the word here)
we have p k stick I do not go for cd-romu
I recognize it's not hardu, but how fit sata drivers?
If you can tell me step by step for k not really have the compu
thank you in advance
sorry for the post, I'm kind of sleepy and I did not see you put tutorial k
Why can not download tutorials that make it easier for me to see them on the comp than the net?
Otherwise ptr thank them learn new things and look news
Here's what the manager says that is Christ
We are not and have never been agreed with downloading video tutorials on this site, if someone downloads something on this site, against our will, that means stealing.
Why try to steal from us? We try to help you and to help everyone.
No need to fear, will not close videotutorial.ro never, never will charge any fee for entering this site.
Anyone can enter, anyone at any time to watch any tutorial on videotutorial.ro.
Resepectati our work and we respect you as you providing you with quality information in an easily digestible format.
Finish with newfound mindset of communism, when people tend to fear and burdusasca refrigerator, you will no longer find food in the store the next day.
Those days have passed, we have to be more relaxed now.
DO NOT WORRY, videotutorial.ro will be open as long as people will need us.
We do not sell site!
Not close the site!
We will not charge!
Will be open non-stop!
You can watch video tutorials anytime!
That's what I say: If you ask this now while ago you could, you took a big ban may not have access never here. If you prefer to be ignorant and comfortable and you're damn hard to get the site to look at them is not our problem but that does not mean he has to steal from us. A little respect please, because we are all people, thinkers and the consequences of your actions not only bring you benefits! Do not care about the other not? new Why would you care?
I can only say this: people debased.
Hi Cristi, thanks for the reply but you were a little harsh in speech, perhaps because I have noted that when watching the tutorial goes off even though there was intent furtŢ did not even tried my trecut.Am install win xp on the stick but I do not recognize sticks, I tried instead did 2.Am really easy to install easy 7 windows stick with both methods that you submitted on the same 2 sticks that Win XP does not recognize the. Method is the tutorial.Care could be the problem?
I installed Windows on my work PC bottles and hard because I do not know that before I 7 windows and went very well have an Acer One D250.
Thanks Solutions wait!
If it goes well, why do not you let it?
Check drivers, you may miss or Windows drivers that you put is not good, many sites are modified windows and lack many functions.
Try to install an official windows (original) windows torrents rarely find good sites.
From what I remember I 3G can be installed from the driver?
But if you go put SATA HDD hard driver or what is going forward answer. Thanks Advance
Hi. First of all thanks for the tutorial, secondly I would have some questions about installing windows on the stick. I specify that I have never installed windows dp stick and therefore I ask you for some advice. the first time I choose the first option 1.TXT Mode Setup Windows XP,…. After seeing the hard drive, I delete all existing partitions and create only a new one (why can't I create more 2,3 partitions and select c for windows installation) , I want you to tell me if this is true with only one partition created. After copying the pc files it will restart automatically, and at boot time we will have to select the second option, namely 2.GUI Mode Setup Windows XP,… , and the installation will continue normally as if we had installed after the CD / DVD. Please the author of this tutorial, and not only, sami also tell me what is correct from what I said and what not to correct me, it would be great help not only me but also many who are testing for the first time an installation ofwindows dp stick.
Thank you!!!
I respond to me one question?
I also managed to install win on the stick, the problem is that now I installed windows 7 and I don't like it. I tried to put an xp again but it tells me that "drive d is corupted", after that I took out a another windows and when the partitions have to appear it gives me an error (the blue screen is made)
that could be the problem?
Hi, I have a Samsung NC20 and after I make the bootable stick… after I switch to Txt mode… when I go to the 2nd stage it stops and I get an error like: Windows error .. can't find a corrupt file and I says I'm missing hal.dll… I redid the stick with 3 variants of windows and it still doesn't work… windows xp Professional sp2… I redone .. in the sense of formatting all the partitions and it still doesn't take it… what the hell to do? I have no more ideas…
maria you select boot device in BIOS 1st be sticku, if so you go to the second phase of Windows installation you must select 2.GUI Mode Setup Windows XP, Continue Setup + Start XP and forth after each restart select all option 2 up your end of instalat.Dupa windowsu you windowsu finished installing, go to Local Disk C: then right click on boot.ini Properties. Uncheck the Read-Only and click OK.
Open boot.ini with Notepad and delete everything you find there, then Copy + Paste this:
[Boot loader]
timeout = 30
default = multi (0) disk (0) rdisk (0) partition (1) \ WINDOWS
[Operating systems]
multi (0) disk (0) rdisk (0) partition (1) \ WINDOWS = ”Microsoft Windows XP Professional” / fastdetect
and save the file. Then click Read Only.
Every time I select mode 2. Gui and so on… I get the error… my installation doesn't work… I kept trying… Windows doesn't install due to the error… I have nothing to do… ms advice… but no go… nush what to do…
try with another stick, and another option to win the stick with the wintoflash you can find the tutorial also here on the site. We are waiting for a success… :)
Congratulations tutorial, please <if you are nice, tell me what to do in case the connection of a device to USB does not show me the partition with remouveble disk.
I do not remouveble disk partition occurs even when plugged into the USB camera even when connected, and even when canectez phone. This happens only on Saturday afternoon when I changed the hard drive.
Could you tell me what to do to solve this problem?
Thank you.
But when you restart your PC buteaza dp stick?
Well I did not stick because of these problems.
It means that you have disabled USB in the BIOS
Not to do something in the Command Prompt?
command prompt you use it to install windows on the stick but if it doesn't see your stick… Right click on my computer-> manage-> device manager. Say what appears with the exclamation mark or question mark, yellow
I did exactly as in the tutorial, but when I put the stick in the computer it doesn't seem to stick because my stick opens and what is on it appears, the autorun from windows does not appear, as it appeared on a windows on the cd … Didn't I do well?
anyway super strong d-your tutorials.
keep up the good work !!
Did it look like XP only when you stick it happens in XP but will go to boot and install Windows on it! Tested by me!
The good solution goes. mc
I went in my computer but I can not manage something else comes out C, D and E which is the DVD writer.
I think you gave the disk Management see the above Device Manager
Dear friends,
Everything is very cool and easy, the apple thing is greased until it starts to copy on the stick. There the first… tens of lines appear “file not found” followed by “0 file copied”. At the end I have folders and files copied to the stick worth about 600MB. When I find him on the USB from the minilaptop, he wants to boot the XP, but then he immediately says that he can't know which tab is missing or corrupt! Jerk! You hear me, corrupt! I took it from the beginning, I reinstalled it on the stick n-spe times and on the optical and virtual drive in iso format. As. Could it be that I have a licensed xp? Who knows, please insult me with a solution. Thanks a lot!
greenfinch
I also have a problem..I follow all the steps..I did it after this tutorial and it came out..but now it doesn't work out..all the steps come out..but at the end when I press the 4 key to copy the windows to the stick. .it appears 2 times press any key to continue I give..and it closes..it doesn't appear to me with y / n and it doesn't last… it lasts very little..it used to work for me..now why doesn't it work for me?
The Asus Ee PC goes.
I'm sorry. He spoke his mouth without me. Go to EE Pc !!!!
Thanks ptr tutorial.
Bai, brothers tutorial is very good, does not stop at any minute offers blackberry in the mouth, only to sit stunned, which is incomprehensible? maybe you have too weak systems, the internet sucks, what to say, really works very well, I made a bootable stick jmecher badly, very carefully, and I will succeed. We kissed, and luck.
Hello
I have a question: Where can I get a good, clean xp? aiau s not on the net if I'm not sure it's clean: D
From agazin, otherwise we are sorry we can not help you, do not support piracy.
ok
I wanted to mention something
Please do not make a tutorial, how to install xp alone.
I do not think I know of you (maybe wrong)
thank you
yes we have, write up in the box "Search on videotutorial.ro…" on the right: install windows xp sp3, enter and you will find the tutorial.
Hello
I followed exactly what is in this tutorial, but when I install the stick windowsu tells me this:
Because Windows could not start the GMT file is missing or corrupt
\ System32 \ hal.dll
Can someone help me?
I don't know if it's allowed but I'll sell you one, cheap with installation / serial instructions… as much as you give, I got a laptop and I don't need it.
Very beautiful description. And elegant and accurate, so that he would not be any reproach. Sincere congratulations and thanks for the gesture!
From the first time was a challenge and I tried a stick on one of 1 4GB GB and source Daemon Tools Lite ISO image file and copying the optical drive. After "n" attempts lovescde me a problem. Booting from the stick next step is to choose the Text option .... start by Setup inspect your computer for installing but immediately to the next step when the Windows Setup window appears with the title sounds a shortcut to the hard disk and After waiting for a few seconds a window appears in which the claim is made that the operation can not continue because .... blah, blah, blah .....
I fully respect the steps, everything was copied USB bottles and was charged with the 630GB 1MB and the GB is busy 4MB 935. Everything went smoothly with no problems apparently normal and very good quality as described.
I tried to see where the error occurs and I arrived at the NTLDR file depicting a paragraph below:
u may need to upgrade your computer or run a configuration program provided by the manufacturer. Memory Map:% lx -% lx NTLDR is corrupt. The system cannot boot. NTLDR is corrupt. The system cannot boot. ax:% x dx:% x cx:% x bx:% x es:% x TRAP% lx
DEBUG TRAP == DOUBLE FAULT == STACK SEGMENT OVERRUN or NOT FAULT FAULT == GENERAL PROTECTION FAULT ======= PAGE FAULT ==== ** At linear address% lx === EXCEPTION === tr =% X cr0 =% lx cr2 =% lx cr3 =% lx gdt limit =% x base =% lx idt limit =% x base =% lx cs:% lx errcode =% X eax =% lx ebx =% lx ecx =% lx edx = X flags =% lx Cy NoCy Zr NoZr IntEn IntDis Up Down TrapEn TrapDis Link% x Esp0% x SS0% xEx0% lx Cr1% lx
Eip% lx Eflg% lx Eax%… ..
I suspect there is a link in this personal failure and tried to no avail to solve one problem but I could not. I gave this detail in the hope that I get for wanting to help thank you very much.
Sincerely, George, a retired older ... (64 ...)
Write up in the box "Search on videotutorial.ro…" on the right: wintoflash, enter and you will find another tutorial on how to put any windows on a stick. Please look at it carefully head-to-tail. Try that wintoflash utility and tell us if the problem persists.
The virus
Back with thanks for your help and prompt response so. I installed Win To Flash, I run the application through the wizard and I had great confidence that everything will be fine. I liked about the organization and running boot files but unfortunately buteaza the stick. The video tutorial program after stop at Setup is starting Windows, but now I do not even buteaza.
I watched very carefully all the trappings of BIOS and even returned to the Default Settings in BIOS, but not buteaza place.
Very briefly: Motherboard Asus P4P800 (- supports legacy USB) BIOS Revision 1019, 4 Pentium, clock frequency 2,8GHz, two slots PATA (+ 2sloturi SATA). There are probably a little more difficult to detect inconvenient remote.
Anyway, thanks for Ham Spirit and generosity. If I don't ask too much I would have two more questions with a very short answer: - if it is worth installing Win SP3 instead of Win SP2 and in the case of SATA ports from which location are the drivers available and what "movement" ( operation) must be done during installation.
With many thanks for your kindness. We want to be helpful (and you) for many novices like me.
George Simonov.
For those who do not manage to put a windows xp to baptize on stik i will help you very easy to id jonufilip on yahoo messenger go on stik of 2 gb of 4 gb etc. guaranteed
jonufilip I wrote on yahoodar nustiu if it is your address:
[email protected]
Salut.E super tutorial and I really need to make a bootable stick with Windows ptr a friend.
Ok I followed the steps as in the tutorial, and I reached the stage when he has to find my sick in the comp… he says “Not found” meaning he can't find any stick in my comp, and I put the stick in and tried in many USBs… by the way..I have a 3.2 GB San Disk Cruize Fleur 1 stick… PFF
PLEASE help me .. very nice! Thank you very much!
ahhh .. I forgot to tell you ... I have Windows 7 .. may be this problem?
Please help me ..! Thanks
We have several tutorials on how to put windows on a stick. Write up in the box "Search on videotutorial.ro…" on the right: WinToFlash, enter and you will find the tutorial maybe with that software you will have the stick. or write windows on stick… there are about 3 tutorials about windows on stick. Does Windows see the stick in My computer?
Hello
Totz steps I followed my boots and reach partitzi shows me just one good one and he does not know but that memory has 969 MB hardu show me, I tried all posibilitatzile or format can not even give it delete , after I thought ii memory stick but honestly do not know if I could so you're a razpuns with solutiza Datz, or what I did wrong: P will multzumesc
hello Adrian, yes Win sees my stick, and I even transferred files with it, so it's a special tutorial for my stick? Adrian ms response!
The GUI mode of the setup, ie the second part of the installation, is no longer executed. I specify that in my case I had an xp installed on one partition and I tried to see if this windows works on the stick by installing it on another partition. All good and beautiful until the GUI stage (GUI mode)…, when the start-up appears from the windows that I have already installed, So the second stage of installing the windows on the stick does not work for me. Can you help me???? Thank you! About the tutorial… EXCEPTIONAL!
Before posting a comment please read the other comments, or not responding to you, because we're not here to say the same thing for each of them! You're too lazy to read?
We have several tutorials on how to put windows on a stick. Write up in the 'Search videotutorial.ro ... "Right: WinToFlash, hit enter and you will find that software tutorial maybe it will stick Aveda. or write windows stick ... is there a tutorial about windows 3 stick.
When I create a bottle through petousb it is formed to the end and it gives me an error {formatEx Error: [11]: An error occured forming the drive. }
what to do?????? still be good
Read my last comment that is "incredible" just above your comment. Very loud right ??? Tatre LENOSI you are still reading frateeeee.
Hey I do not mind a question I Faku yo shi kum exactly you said but gave knd to format stik u had to spend a half hour maybe more mention d k d have a stick 4Gb
is there any way to do all this work on an 8 gigabyte stick? because it gives me error when trying to format it and I read elsewhere that the stick would be to blame because it is 8 giga g plm if anyone has an idea please say. thank you.
'You said that going on a stick 1gb minimum-maximum 4 gb
Mention it in the text above tutorial but if you are too dumb or lazy to read it is no longer our problem and we do not look directly at us!
You mean this phrase smarty? They mean "least gigs 1" it seems that you have a problem! Write something up?
Dude, you are either incompetent or ... otherwise not find your description. You must be at least 1G, the rest does not matter ... can be 30G 16G the stick does not matter but have no more than 1G. If there is a maximum limit be sure that it was precisely as was specified and low. Since the upper limit is not mentioned then it is clear that it does not exist, noobule
Maximum limit is 4GB bathrooms .... "smarty" ... and I bet you do not know where Hadrian as the difference between noob and newb, n00bule
Even worse, the maximum limit for the stick is 2GB… and forget what it says in the readme file: SOME NOTES ON DISKS
-------
Will PeToUSB list fixed and removable disks. On the GMT
Conditions: -
It is LESS than 2GB. (It won't format FAT16> 2Gb)
Hadrian So, how about amu?
Nenea expert, there in that file refers to the FAT16 partition format, that's the limit of the 16G FAT2 format and the FAT32 is 4G, you have no way of knowing these aspects because "you're too expert"
Any stick if it is formatted FAT16 you can not transfer more than 2G at once and any stick formatted FAT32 you can not transfer more than 4G at once but this can be avoided regarding the tutorial on: "How can we transfer a file larger than 4 gigabytes on a USB stick or external hard drive ”which you will find with the search box on the top right.
stop !!! it was written that a stick of at least 1 Gb necesar is needed but the maximum value of 4 Gb… was not given but if you are “smart”, explain here why there is a limitation of 4 Gb !!!! :)
How can I make a usb stick with Windows 7? Windows 7 on the 90 trial site?
Write top right search box: WinToFlash, you enter and you will find the tutorial, or write: windows stick, you enter and you will find many tutorials about this.
very simple ,,, if I enter your pc I do anything you want in connection with windows any type boot-able d ……………… ..
dacanu understand this tutorial I can do more in a few simple steps,
Dude, this is not advertisment, go and make your adwords account for published.
Please do not exceed the limit of common sense…
bai… .lasa cicu mic ..
this is about your opinion ..
not great as you know you're doing etc. ..
😉
You're absolutely right, plus the tutorial very well explained how to install
Please tell us how to set the bios to sabotage on the usb
thank you
I greet and respect for everything you have explained everything just right but blame those who do not correctly apply the command prompt if you errors this is for xp Trbuse anteles as for XP you need to run it on a PC that has installed all xp to run this application on a pc with vista or win 7 can not not go that will give errors and year last row if you have XP Cracu so I will give errors must have as possible kit xp original and to go on a stik copy on vista or win 7 run WinToFlash this application goes installed any software on any system whether or win xp vista 7 Regards Michael
Greeting. F Tutorialu is hard, although I know the eeehacks a while. The problem is that I try to install a Windows that I fell in 200 Mb with nLite and always get the message that Windows Setup Files not found or something. If you have solutions, we look most forward (trying to install on an Asus Eee PC with 4 4G GB total).
Thank you in advance
I have a problem! Ok, I did stick bootbalil and everything is fine, the problem occurs when you install Windows on an Asus Eee Pc! When you get to the partitioning sees my USB stick as Part C and hardisk is absent .. do not read it! Please help me! Thank you!
Hello,
First I want to say that I am so pleased with the tutorial. I could download it too.
No, these tutorials are posted on the site for viewing and nothing more.
super.de lot of time looking for something
Hello! I watched carefully videotutorialul and I think I did everything in the OT., At least I tried. We observe that in the end, in addition to the partition C: and D:, I've got another partition 951MB T: TEMPDRIVE. What the hell wants to be? I use something or not?
Thanks nice, even this video tutorial really helped me.
Shawl. I have a problem. I want to put Windows XP Performance Edition on the stick to install it on a 4G EEE PC. But when I select the path to windows it tells me that it can't find any file… I tried with several windows but still the same… it didn't work with Win To Flash the message “Setup is starting Windows” appears some errors… like 0x0000006 and crashes. I tried different methods but I can't make it work at all. Just with an image of an original and untouched xp sp2 went… with the other windows does not want at all. From what I read on the net it's about the lack of necessary files… at least I would know which ones they are, to integrate them in the image of windows to make it work.
Hello
I recently got a Asus Eee PC with Win 1005 him 7p
I tried to install XP but does not work
you have to choose my partition occurs only bottles. I tried all options first boot device and still does not work
Did I miss something?
Who can help me this is my id: fatboyslim_wiz
thank you
I have a question can I install windowswu stranding on a stick on the phone
USB_PREP8 Windows regedit why change? change user, user logon.
and what else changes it… ... I installed windows xp home on a netbook emachines; but I don't mind the logon user change. why did those who made this program USB_PREP8 change it?
administrator please rapundeti the PRB. that the change we all windosul registrilor.as Doris clean without changes
Salu, I have a question
works if you use a stick instead mp3 player
[mp3 has 2 gb)
other details besides those given in tutorial would be?
xp necessarily licensed? go without? I mean I put an unlicensed xp desktop are now and "went right" happens to like the many others on the net ... which unfortunately remain unanswered / solution ... I tried to 3 versions and shit / hard as cabbage ... like to see a tutorial to the end, encompassing all the + installation on netbook, for that to be honest I think this method is not running or missing something important trivial tutorial.
there are several ways to make a bootable stick with windows !!! For example, we have tutorials on this topic! About other ways to make bootable stick with windows. Type in the top right of the search box on the black border: WinToFlash, enter and you will find the tutorial. Creating a tutorial the way you want head-to-tail starting with making the stick bootable and ending with installing it on a netbook would take too long. The average on the site is very small in the sense that users do not watch a video tutorial to the end. either they look skipped, or they scroll and ask idiotic questions on the comments section, questions that have been clarified in the video tutorial but for convenience and not through our fault, unnecessary comments that have already been clarified in the tutorial are posted. I managed to install it on a notebok with the help of a stick by all the methods presented on this site! From what I understand you have the best result if you use WinToFlash. you don't need an original windows but none of it made the harp look like I know what Arab jaxorel downloaded from the tracker with a lot of software and services taken out of it and other drivers and crap included. Try to use a clean windows not modified beforehand with nlite or I know what other tools. You go to someone who has an original CD, make a copy of it, look for a series and voila… Most Windows on the net (torrents) if not all are insecure, have missing files, vital and necessary files when you want to use that windows in other “processing” processes such as creating a stick, because when you make or put that windows on the stick in the bacground without you seeing that certain files are checked, the integrity of the image with the operating system is checked and if it has been modified and files have been removed automatically you will receive errors. Nobody says it has to be an original windows, but CLEAN, unmodified, non-personalized, and without drivers, services and other crap included in it.
Not applicable to annoy anyone because we are not to blame if something comes to you but not yourself! Not knowing how to work certain files, procedures, what actually happens when you do something in bacground PC and so on. Often the culprit is the human factor that is put in front of the user and not the software or the fact that show you how to do!
I apologize for this outing, I forgot that you kidnapped your free time to do so in order to understand the whole novel .. but I was bothered by the fact that there are no solutions to the problems .. I tried with wintoflash… still not it works… until I try wintoflash..I installed linuxmint and it works great (after the stick, obviously..that it's a lenovo s10-2 netbook) .. but I would have liked an xp..the idea was to escape of windows7 starter..and i got rid of it, thanks to linux which worked without any problem.
Well you did not say that the first time you had Windows 7 namely when you tried to put XP. 7 Windows XP does not let you install because you think you want to do downgrade. Now that you say you formatted partition with Windows XP 7 try the chicken again, this time not guarantee a chance to go but you. Most users had problems when installing XP's Windows 7 already have even if they used a Desktop PC and boot XP from a CD.
sall… .am win 7, everything proceeds according to plan… .when I reach step 4
not want to create virtual drives u (t :) Can you explain to me why. And if there is any solution
says this:
-----------------
-----------------
Use Only C: Drive of Computer Harddisk as Partition for Install of Windows XP
And Then Select Quick Format with NTFS FileSystem, XP Install is Automatic
Unplug NEVER ***** USB-Drive ***** Until After First Logon of Windows XP
New Harddisk and Creating Partitions after Booting from USB-Drive:
Direct after Deleting and Creating New partitions, Quit XP Setup with F3
OR Switch OFF your Computer and Boot in any case from USB-Drive again and
Run 1. TXT Mode Setup again to get DriveLetters That Their Correct Value
So in this case one Boots ** TWICE ** in the TXT-mode Setup
***** More Info: Read the Help_usb_prep.txt File *****
Press any key to continue. . .
--------------------
--------------------
Even errorii message tells you what the problem is and what to do! Learn English, you're not here to do translation from English into Romanian! English is the language used internationally and should be known to all of you especially when you want to use the computer!
Translation errorii: Use only the harddisk drive C's that partition to install Windows XP and then select Quick Format (quick format) to NTFS. Installing XP automatically.
NEVER UNPLUG USB stick until you first click on the Windows XP logon screen.
On hard to make a new partition after booting from the USB stick. After you have deleted and created new partition you exit the settings XP (XP setup) by pressing or turning off the computer and boot F3 in any case again on the USB stick and run the first option TXT Mode Setup again so will get value partition correct.
I think it would be helpful if you want to give more details about how many drives you have, what operating system is already installed, you can set where to install Windows. sure you looked at the tutorial to the end? if it's not your problem, you skipped some very important steps which have been cleared and attention that can occur and how to proceed exactly.
The installed know how to install it
The thing is that yo jung not to that stage. When I do not want to copy XP stik
4 step (with usb_prep8)
Yes I looked at the tutorial to the end
And from what I saw from you was good, started to copy stik (which to me does not happen)
So do not think I'm so nob, I've done this on XP and it's good, In win 7 pro does not work
Well, my friend, with this method you have to be on XP (to do the whole operation being on Windows XP) to put Windows XP on the stick !!! if you have windows 7 use winToflash… type up in the search box on the right on the black border: WinToFlash, enter and you will find the tutorial.
7 Windows creates a partition on hard to 4 phase, (when you have to stick a copy win xp partition, copy disk, then asks if you want to copy the files on the stick press Y, press n to finish
I also encountered a problem poate can anyone help me?
when it starts to check my files [after pressing txt mode] it enters like a normal cd… the problem is that after it loads and the part with enter to continue should appear I get a blue screen… what I have to do?
I want to remember… I tried on the pc and it worked… on acer aspirin gives me the problem with the blue screen… I would have put in cd win but it doesn't have for cd - it's one of these new little models that don't have such a thing… what can i do to fix this? … Mutlumesc
I managed to make a bootable stick after this tutorial. But I have a problem installing windows xp sp3 on a hard drive. My stick is booted, everything goes ok until the "menu" appears in which I have to select which partition I want to I install the xp (and format the old one).
At this moment, something like this appears above me written..Mass storage device: NONE… and if I format a partition, I installed something… I only have 2 options..back and restart on pc.
Need to integrate SATA drivers or disable AHCI in the BIOS laptop. See that we have a tutorial on how to integrate drivers. Write up in the search box on the right of black: How to install Windows XP on an AHCI configuration or a RAID array, you enter and you will find the tutorial.
What I said is true joomla name for you!
so super good tutorial, I managed to do each step, and let's see how it works and see the surprise that we had put the stick windowsu not require cd-key you have and on CD, it asks me instalex with stick and cd-key but if you do not install the cd it asks, mentioning again is the same windows that be the problem?
da.totul the MRes ok thanks mult.pt.tutorial
Hello! Everything went normally until at "enter your choice - 1" from usb_prep8, after I choose my virtual image or windows dvd (I tried it anyway) I get an error: "the path H: \ does not content windows xp source files ”.. what should I do? Thank you!
I have problem, I did as it was written on the website image format hdd from check c:'s, begins to copy files on the stick, and when you reach 7% stops can not copy some files skip file if she bad after giving a bluescreen 6-7 files, so I'm not surprised, I just do not understand why it is not able to copy more files and have already tried 2 4 gb sticks that 2 GB , Does anyone have an idea?
I tried to make the stick bootable but we did for it gives me the error from the beginning, namely tunc when the band says that I can not format it. I have a date to 8gb and xp professional
Very helpful, thanks for the tutorial Cristi!
I also have a very important question {I say} for me, I can make a windows on the stick if I pulled the windows in the computer {I want to mention that I have a new laptop and it's from the one that doesn't have a CD, please let me know help me too {I say this because I watched the tutorial 5 times and I saw that you went somewhere on the path that, I do not have that path outside the operating system} I leave a phone number although it is not good maybe but I really need a little help: 0762 ……… .Thank you and I'm waiting for an answer.
the worst is that I never found the stik
I had a 1GB stick and I made it like in the book as in the tutorial but I had a problem that I skipped over but I don't know if at the first installation I will have some beatings since I haven't tried to baptize it yet that it still works ex on the pc. my problem appeared in this area bootsect.exe / nt52 and for me it was the stick on 'G' so I gave it a nice 'g:' but it didn't work, it wrote something there but not I remember what it was but I passed this phase and when I look at the window c: the menu appeared with 1,2,3,4 you know and I gave it before as in the tutorial but I don't know if any defect will appear through that area. by the way I copied it from the dvd-drive xp I don't know if it has any connection. I would also like to say what exactly made it wrong for me to look like that. otherwise iii extra cool tutorial.
it's very simple if you pay attention to the tutorial seems pretty easy instalat.ms
Who made tutorialu or those who managed to make a bootable stick to give me add florin.diablo I did everything to the end are some files
on it but it's not bootable
Type ss to the right in the search box on the black border: WinToFlash, enter and you will find another tutorial, with that utility it is easier and simpler. You didn't even deserve an answer because this was said billions of times just above your comment and to others, but laziness is the big lady and it won't let your heart read. Stay and listen to gout and salami on YouTube… not to somehow read
I greet everyone and I want to thank in a special way the one who struggled to help us who are beginners in the installation on Ee PC .. "thank you Ionut!"… .I just wanted to mention a small aspect for those who try… if you start the notebook with the bootable stick and do not boot it is likely (as in my case) to need to switch from Bios as the hard primary stick with windows on it… otherwise… nothing happens .. (does not boot) I wish you success and as few viruses as possible… !!!!
sorry I forgot to mention Cristi… respect!
Adriane no longer misleads 30 G 16 16 sticks can't be formatted in FAT 1 even in dreams, I tried with a XNUMX gb SD card and poor chances only errors… has anyone tried with a card SD ???
Andrian mind nothing that I want to make a bootable stick with xp vista and 7 WinToFlash go you said in the tutorial that does not work xp
I didn't say that, the tutorial with WinToFlash is made by Cristi, if you pricked your ears better, each one at the beginning of the tutorial we say "Hello friends I'm Cristi… Hello friends I'm Adrian" So I'm Adrian, and even Cristi didn't said it doesn't work but just didn't try XP. But I come and tell you it works because I tested it. You don't have to somehow test to see if it works, not somehow your stick jumps in the air to fuck your little eyes tine Don't touch your PCs… lazy to swallow alms dust, no move the mouse, don't google, don't read the forums… stay with them like this… maybe someone will do a miracle and your problems will be solved by themselves…
I tried this three times totaling treba and reach a point where I did not copy a block simply what the problem
every time I finish inst windowsu tells me “windows could not start because the following file is missing or corrupt: \ system32 \ hall.dll
Please re-install a copy of the above file. "
Anyone else have this problem? how to solve?
Look for another Windows CD, it is very possible that the CD will be scratched or damaged, especially if you have it for a long time… Find an ISO image and burn the image at the lowest speed on the CD. If you don't know how to make a bootable CD with windows XP, type it in the search box on the right on the black margin: bootable cd or how to make a bootable cd with windows
Sal. My minilaptop not get into windows and I decided to make a bootable stick for installing Windows. I did stick, but when I give it to boot black screen appears and there blinking underscore. Thereafter nothing happens. please help if you know the problem. Thank you.
Thanks bro, it worked, I installed, but when I stick another stick an error and have to figure 3 ok times to get rid of it and over 1 minute and appears! Have original xp?
SUPERTARE YOU! I think grandparents would do! RESPECT
I did it and Windows 7 ULTIMATE BOOT STICK TO DO EVERYTHING went smoothly
why can't dreq find my stick? I even tried with 2 and nothing… aman2 have 4 G… I saw through the stations here k there is no upper limit of stick capacity… however what is the problem then?
bv bv thank you goes his job and go stiku miro sd: D it's really nice we hear soon
Hi cristi, I also tried to put win xp on the stick and I followed step by step the instructions presented by you, only the problem I tried to install on my laptop pi3525 amilo which does not want at all and on an HP nx6310 it took but after the boot starts goes a bit and gives me this error "the file iaStor.sys is corrupted" maybe I was wrong somewhere and you can help me, I also specify that I have a 1Gb Adata stick.
If you had read all the comments in this tutorial, you would have solved the problem a lot. To install windows XP on a laptop / eeepc write up in the search box on the right on the black margin: "How to install windows xp on an AHCI configuration or on a RAID array" and enter
And to make a bootable stick with XP, if this method did not went to look tutorial with WinToFlash. he knows how to put on the stick, oricefel for Windows XP, Vista or 7 of any operating system you want to make stick. Find him writing tutorial in the search box above right of the black border: Enter WinToFlash and giving
Hi .. I do everything in minute video to 5: 15 I tried and double click and run Apache administrator I get okey but I do not recognize usb windows are 7 8 and Stik's gb
Hi… This tutorial helped me a lot, I followed the steps and it went perfectly and beautifully
Please, tell me, it may sound stupid, but how do you enter "backslash" in the command line? on which table is it assigned ??
This = >> / is called slash
This = >> \ is called a backslash
Slash the chicken it by holding down the Shift key and pressing the left key and immediately following them. shift means change, so that means holding down the Shift key and pressing any other besides it will make the character key presses (excluding the shift) to be another.
Backslash you get by pressing Shift and backspace key immediately following the left's (to me backslash is located on the same row with the backspace key, which deletes characters immediately to the left of)
Now depends and your keyboard ... Look HERE a picture (click on the word HERE in red)
Thank you very much, Adrian! Indeed, the key is exactly like the picture, I would first saw her, I bit keys deleted. Again, thanks for the information, very useful tutorial, I followed all the steps and had no problems. However, a little further questions: what should I set the BIOS to boot from the stick when you want to install Windows?
Write up in the search box to the right of the black border: Try Google Chrome OS from a USB stick without installation, hit enter and you will find the tutorial, there 6 the minute we showed what should be set in the BIOS.
I understand, thanks for your help!
A small correction: As I said above depends on the keyboard, in some cases must be pressed and shift the other cases. When I simply press the / key-slash and show me or \-backslash and again me and show without pressing the Shift key.
Thanks a lot! 10 note tutorial!
salut.mam started last night to make a bootable stick to my windowsu skimb a laptop.am all the steps in the tutorial and then formatted C instalat.am grabbed mam's and everything went perfect even gave restart.normal after restart must continue the installation But I appears like this:
"Windows could not restart Because of a computer disk hardware configuration problem.
Could not read from the selected boot disk disk.Check boot path to the hardware.
Please check the windows documentation about hardware disk configuration and your hardware reference manuals for additional information. ”
Siti somehow is the problem?
please help.
thank you!
In what way you choose booting from USB stick opera? You looked at head-tail tutorial without rewind?
Please detail how you choose to boot from the stick. Using the quick menu by pressing F12 boot menu, or entering the BIOS boot priority?
I have a notebook of this small SAMSUNG nc10 and it works with F9 to give it to me to show me the 2 options. it doesn't work either with F12… it also has a strange fff bios.
I gave it to the 2nd one with text… it stopped normally but after the restart it gave me that era with system 32…
however why does that kestia issue me with system error 32… sistem.dll is corrupt as if to say !!
now give me something error with system 32 / file.dll is corupted… wtf 🙁
I tried 2 windows and it still appears to me… pls help me !!!!!!
hello, I tried to make this win xp bootable and I think it came out but I have a little problem: 1) when copying those DLLs and win stuff (blue screen with yellow stripe if I did not say correctly earlier) gives me something like that can not copy flash.ini what for?? from my Windows? 2) I did skip the flash.ini and continued to copy but when entering the interface serial windows asks me if I menitunea CD installs this series I do not ask if you can help me. Thank you so much for the tutorial and thanks in advance for any help on this topic I wish a good day
are the most tari.tineti it all asa.bafta
Regards tuturor.Cu a while ago (a few months) I have customized XP so that, given the 3 4-orders beginning and can go for a walk
(About 20 min), and when I return I completely installed system functional.Tin to say that I worked after videotutorialul with nLite. Now I made a bootable usb stik using XP customizat.A operation succeeded, but the installer stops the show, and after that give the show goes on and ends installation. The question is: why ask Stik series and the CD after it is made Stik not ask him?
Make bootable stick using WinToFlash which we have tutorial. You can find it by typing in the search box top right of the black border: WinToFlash, you enter and you will find the tutorial. Pay attention to the text above tutorial and tutorial, not head-tail run and watch the tutorial
I have to say one thing, if you stick more than gb 4 3.0.0.7 goes formatted PeToUSB will be PeToUSB 3.0.0.8 version you unpack as PeToUSB 3.0.0.7 but at least I had to rename the folder because when usb_prep8 I was in this format PeToUSB3.0.0.0 unzipped rename fisierul.Il PeToUSB and go smoothly just like in tutorial.
salt.
if I have a comp old and the BIOS does not have USB boot option can do something about it or remain on cd-rom
ms
ATTENTION !!! AFTER THE PROCESS OF MAKING THE BOOTABLE STICK WITH WINDOWS XP IS COMPLETED, YOU CAN USE IT ONLY ONCE AFTER THE NEXT INSTALLATION OF THE XP YOU HAVE TO DO THE STEPS AGAIN DESCRIBED ABOVE in this new boot stick so !! IF YOU HAVE MADE THE STICK… don't wait for tests to see if it works and stop running windows installation… it's enough to do this and… IT'S NO LONGER THE BOOTABLE STICK FOR THE SECOND " test "!! Good luck!
I do not know what to do, but I do not know how to do it. It's criminal gang: -j
Thanks to those from the video tutorial for the simple explanations… and the steps used! You can't go wrong !!!
very good this tutorial…. + 10 up
Doing all the steps successfully, but then I can not format says that Windows can not load the files, why?
I forgot to mention that I used windows 2 different sites and the same result, I tried on PC and as I say ...
Use WinToFlash, we see that tutorial about it, you find the search box in the top right. With WinToFlash is easier
Sall
How many MB should have stick after the whole process finishes?
Hi guys, I also have a problem I go through all the steps in the tutorial but when I have to copy my windows to the stick after pressing 1 I select the driver then press 3 and I show the stick when I press the 4 key it shows me this “Error: ther is not enough space on the disck ”and below after displaying about 3-4 times the same site writes:“ input correct path: _ ”and doesn't let me write anything. what do i have to do please answer me i need it urgently
How much is the USB stick? Did you read my comment above tutorial and learned a little higher? Why do not you read the comments? Do you really think someone will stand for each of repeating what is already written 100 times for others who had the same problem as you yourself just because you're too lazy to read Comments from?
The stick is 2 gb is a pq1 but I have solved I passed on that side only it does not put it now it means it does not make bootable it gives it a copy-apste in some way i tried and with wintoflash i did exactly like in The tutorial at wintoflash puts my windows on stick just as though i would unzip the iso image and I'd give copy-paste do not understand why it can be to blame the stick?
ms fffff much Erge great, I am so happy
I wanted to say that it is going to install and finally managed, but my laptop does not want to recognize the DVD drive, what is to be done, the bios sees it, but the boot from it does not work, I installed wind from stik believing that in another operating system mi = l will recognize it, but it does not seem like it. I mention that I have an aspiring 5220
Best regards. Good job with these video tutorials, a goldmine ptr can tell who is doing harder calc .. I have and I have a request, I've been looking on the net after a quality video tutorial about java installation but have not really found anything concrete. I followed the steps after diff forums but it seems that each explain to me his way and the result was zero barred. Perhaps the future will make your time and ptr quality video tutorial as only you know. Greetings and all good to hear.
What kind of java you mean? The Java Runtime Environment?
Hello. I also have a problem… does anyone help me?
So… I followed the steps… I did everything to be done and I wanted to start installing, but when it starts, it writes to me: “NTLDR is missing” “Press any key to restart”… thanks
Read comtariile above
can add other files on the stick or somehow affects Windows? thanks
sal I have a Sony Vaio VGN-fs115b, and do not know how to boot the stick on, cv indications?
go to the BIOS boot menu and have hard disk drive:
legacy
HITACHI_DK23FA-60-(PM)
optical drive
network
floppy disk drive
and hence do not know ...... pls help
Restart with the stick inserted and press the F2 or F12 or Esc key. Some laptops have a quick boot menu that you can access without entering the BIOS but by simply pressing the buttons I told you about above. But you see that here too it is supported… some Laptops do not have this option activated by default and you can also activate it from the BIOS. You have to have somewhere "Quick boot menu" or "Quick Boot" or "Boot Menu" you give it Enable
when I have to start I can't… you can't find my stick… I tried to solve the problem for hours but I didn't find any solution… please can someone tell me what I can do?
hello! spunetzi please can I install Win XP on this computer a Toshiba Satellite l500-1qk. mam tortured hundreds of times shi primeshte not give errors. seems odd to get something. bios can be anything?
I wish all the steps and I can not boot: (dc?
to me it's not formatted stiku 8 giga yet somehow I managed to format and make bootable stik that I still do not understand why not go something like this jegu Tracing good to go once in his life:
Because you do not read the reviews and look at the tutorial. WinToFlash uses, see we have tutorial about it. You can find the search box in the top right. Read the comments before you post a comment
I have a player of 3 mp2 gb, made bootable go? I tried but I could not after this tutorial
Oaaaa, let's cry and be lazy not to read the comments, oaaa oaaa oaaa, you realize what a tragedy, it's not going to make the bootable mp3 player… oaaa oaaa. Read the comments above the one above your comment. I have not been able to see such people comfortable reading since my mother made me
Hi, I installed it on the windows stick exactly as you explained it worked…. but when I get to do the partitions it doesn't let me delete the C:… partition and not even install over it…
Any solution please?
What operating system you have now installed? Or what operating system you have on that pc that you say that you go to delete?
Windows XP is installed but not started and there was 1 installed but half and I think that's because ... it does not work even removed and installed over any ... I wonder if there is any way to put a stick formatting program such partition magic but do not know how to put it to work ... if you could help please
You said it does not let you delete the partition ... how you tried to delete it? You have selected the up / down arrows of C partition and press "D" and then press "L" to confirm the delete partition (Learn English, there you will say in English what to do and what buttons to press)? What message did you get, what happened? I do not think doing it right rather not know how to work correctly in a Windows XP boor. She can not let you delete the partition ...
I know how to delete the partition you delete the partition on C give me to give back to give back and when I say install it directly over or to delete or change a folder to exchange folder ... did not work and then I gave him began format and then eror
"The following value in the .SIF file used by Setup is corrupt or missing:
Value 0 on the line in section [SourceDisksFiles] with key "SP2.cab".
Setup cannot continue. To quit Setup, press F3. ”
This is the error… I did with several windows with which I formatted calc yesterday by mistake I wanted to really see if windows works….
Try what Vanessa told above or do a scan with HDD regenerator. We could have badd HDD sites. About HDD Regenerator find tutorial writing in the top right search box: HDD Regenerator, you enter and you will find the tutorial.
Vannesa you are the coolest on the word, it went perfectly, I can't believe that after so much work and time I managed>: Thank you very much you are no.1 !!!
k tells me k bootsect.exe is not recognized as an internal operable command program or batch file… .what can i do in this case… .can you help me?
I also say the same thing
I would like to know if I can install Windows XP on a bootable USB stick from a Windows platform 7.va thanks
write in the search box on the right: WinToFlash, hit enter and you will find the tutorial, read carefully the text above tutorial and comments. if your question is already answered are repeated, you will not get any answer. Guilt that you have not read coomentariile yours.
and greeting cards in the first place made for all tutorials are a great help now that I have a problem with this tutorial I did exactly as u say in the tutorial but I have one problem when boot to give him leave and start first surgery but not too far Aung adik up formatting even when asked to F8 immediately gives me that wonderful abastra page (error) and I want to succeed because I am big problem with CDs that I would spoil them all fiimiu be very grateful if you could help me
Thanks and Regards
Get another Windows CD, what do you install on your laptop or desktop? It wouldn't hurt to do a hard check with the HDD Regenerator. Find the tutorial with HDD Regenerator by typing in the search box on the top right: hdd regenerator, enter and you will find the tutorial. as I said look for another ISO image with Windows (you can do it… we do not support and do not encourage piracy) and burn it at the lowest possible speed. If you don't know how to make a bootable CD with windows, we also have a tutorial about it. Write in the search box: how to make a bootable CD, enter and you will find the tutorial.
I tried to do all operations on the desktop and I saw Believe hdd regenerator tutorial and I had no problems with picture windows facuto deamond tools but I do not Depe cd and directly from calc (adik another image that keep you always do for each a cd, that takes care fiimiu to solve immediate :() and stick everything on it is 3giga I tried to install Windows XP exactly I saw in tutorial and went mia That means there would be the problem with sticku
I hope you do not spend too much
I made a bootable stick but I can't install the system on my laptop. error: iastor.sys file could not be found, maybe you can clarify it for me… ???
make me out to understand a single detail acetate windowsu stick can not install on your desktop or laptop only goes for the tutorial it says something in laptop
Please play with response
You can install anything… you could find out for yourself if you tried, nothing jumped in the air!
I tried to stick to 8 Kingdton G and gives me error 99% formatting reach it why?
Why not read comments? WinToFlash uses, it's simply writing up WinToFlash find the tutorial in the search box on the right: WinToFlash and giving enter.
I tried to give the win to flsh and when to boot from the stick locks
I have a Dell OptiPlex GX siostem weaker 270 2.4 GHz processor GB RAM 1
I enable boot menu in startup but baptized
Hi… I have a problem with the installation, everything is ok but when I get to step 2 I give GUI Mode Setup, Windows XP. he tells me:
Windows Could Not Start Because the Following File Is Missing Or Corrupt:
\ System32 \ hal.dll.
I got the same problem some troubleshooting?
I have a MSI Wind u100 that came with XP Home preinstalled Now I want to put xp prof
I solved the problem
at least to me was the fact that I try to install in partition d: that in c: the rest of the data I needed, I thought, I'm not sure that the program is bootable usb only choose C: to boot, I I realized his boot.ini in c: and not in d: which install win
so those who give with hal.dll error trying to change the partition in that installs necessarily be c:
success
Hey, how you chose the partition that you want to install? I know that this option appears later during installation and the hal.dll error occurs as soon as buteaza. Tell me how you did me, please, for I have the same error.
boots from the stick first and then choose the partition you install Windows and copy files and the boot, here's the problem as boot files go in C: drive no matter where you choose to install Windows, then move on to second stage in the boot and the stick but instead of looking for files on your partitions you look in C: Where is the boot.ini and give the error for the hal.dll not in C:
trying to install directly in c:, at least to me went
I don't think I understood… it doesn't get to the point where you can choose the partitions, the error appears as soon as it boots….
cabdi boot from the stick you have two options give the option 2 and go straight into the installation menu where the read data and then choose the partition Sitema
with hal.dll error should give you a doau time you boot and choose 1
I do not know maybe you do not think it's different though
when you boot for the first time you have to choose the txt… option.
You know these two options appear? You can not set the BIOS to boot from the stick or not you managed to stick and sees not as bootable
Hi..I followed the steps until a certain moment namely… ..almost the end when I chose 1) for the G drive for windows xp, and I was going to choose 3 for the stick (I have a 4 G kingstone) which is for me on D: not on H: how is it with you..in the end it doesn't matter..and he tells me: ***** d: is not a valid Drive ***** and I noticed that the icon has also changed stick from the usual one, in one that looks like a folder but open. Can you help me… thank you…
Hello,
I was stuck 8 video: 48 and there no longer want to start, it's not my internet u because now appears! you want to give play to the video, it looks like you have a problem will be fixed soon?
PS: Very useful tutorial, best video tutorial from what I found on the net, and I want to see it completely if you can, or you could burn it to download video?
Hello. First of all I want to thank for all posted tutorials. Are very successful and useful. I still have a question about the use of bootable xp stik. I have done all the steps I have followed, I have been asked, I have tried 3 images and 2 cd from which I easily install and whenever I boot before giving the command F8 gives me the blue screen. I would like to know what a mistake, if I'm wrong or if it can not be used on any desktop.
I also have a problem… I did exactly as you say in the tutorial but when I open usb_prep8.cmd from the folder and give the format to the stick it says “PeToUSB Error!” "Failed To Lock Disk". I need help… I mention that I have a 2 GB Kingmax. Thank you very much! Wait for response
I went f well. It's very clear tutorial. Be careful where you take archives. Some look like usb-prep8 not like usb_prep8 tutorial here and if you are not careful in cmd will not succeed. Have given the command exactly as it is defined folder. Cam so.
If you were careful and watch the tutorial head-tail learns that archive with the necessary tools is available for download above tutorial. Do you have a large download button as the sea horse
Hello! I know it is, but I already archive. Now there's no problem, I just wanted to warn those who intimpina such problems. The rest is ok, it works for both versions installed winu, we tested today. And WinToFlash utility is great, you get rid of all orders easily and ef although the former. Anyway thank you for all the tutorials that at least I've used them before. PS. follow it to the end and not only once.
Hi, I also followed your instructions for. create this stick Bootable but in the end after everything ends, it appears to be bootable but I can not use it for. installation because it writes Boot from usb… ..ok but then it restarts and that's it..I tried several times.What I don't understand is where bootsect.exe / nt52 comes from H: what about nt52?
Try to make bootable utility WinToFlash which we have already tutorial. Write up in the search box to the right of the black border: WinToFlash, you enter and do it with that program (go for xp)
I tried with WinToFlash and exactly the same symptom as with the Cmd. It makes it bootable but it doesn't see it when I install it… and when I insert the stick after I finished the installation with win to flash it doesn't see it as the original source of windows..Do I have anything else to do?
I do not know what to say but the bios you gave him the first usb flash or stick f11 to go straight?
Yes I have on F12 Quick Boot menu and from there I tried and I tried with Bios on F2….
What if the BIOS does not see my USB devices? I can not put the primary boot! Self, do a great job with these tutorials!
USB will you see it on boot if you put a boot in it, if not, it does it will be displayed on boot.
Right so, but there's some problem, namely after the copy PC files on the stick first time you crash and it is solved by putting bottles BIOS labootare be the first but not the hdd drive. Right now I am patito. then be given back when installed completely, because when you remove the stick will not find on which to start.
If the bag goes butat.dar stick in the laptop PC nu.Stima
Important
For those who have a SATA hard drive. To prevent errors like "Windows Could not start because the following file is missing or corrupt:
\ System32 \ hal.dll. ”Or“ NTLDR is missing ”check in the BIOS and you will see an option with SATA Mode: AHCI Mode, or something like that, depending on each BIOS. Ehh .., depending on that, set that option to disable, or switch to IDE Mode, as appropriate
Thanks a lot for the tutorial, works perfectly.
buna.am install Windows as it is in the video, and after I gave him a restart write ERROR LOADING OPERATING SYSTEM can you tell the problema.multumesc
This tutorial is about how to install Windows but about how to make a bootable stick that can boot and install Windows XP. To watch the tutorial to install Windows XP write up in the search box on the right: how to install windows xp sp3, hit enter and you will find the tutorial
I installed Windows and if i make a restart does not start unless you stick in there that would be the problem? thank
thank you, I've been looking for something like this for a long time, but I tried to put xp on the win7 platform and it didn't work, only on xp I managed to put xp, keep it the same, as long as possible many tutorials… success !!!
There are a lot of methods to put windows XP on the stick no matter what operating system you do it from… You could use WinToFlash about which we have a tutorial, it never failed me, not even when I made a bootable stick with xp I on windows 7. Type up in the search box on the right on the black margin: WinToFlash, enter and you will find the tutorial. He knows how to put any Windows pestick…
I have a problem. when I go into my computer sees the stick but PeToUSB sees not why? No USB drive of writing found.
I 7 64bit windows after pressing usb_prep8 ami not seeing the bottle I ancercat 3 different sticks and so please ajutarima.
Try with wintoflash is very good and it is the easiest to work with
We have done a little tutorial about WinToFlash long! You can find the search box in the top right. You write there: WinToFlash, you enter and you will find
I tried the windows 7 and goes to put the stick windows xp .. Why?
hello do you thanked the wonderful work! I followed the tutorial carefully worked my first icercare. bottles from the second bottle I had trouble formatting 8g gave me error so I used WinToFlash
Hello Cristi and congratulations for the very explicit and to the point tutorial. I also tried out of curiosity to learn how to do something like that, all good and beautiful I created the stick it started to boot and it went OK… .but until the moment when the computer and -he gave the first restart (exactly as he gives on the CD). From there he didn't want to. He gave me an error in which he told me that he could not find a way to boot and that it was a problem to configure the hardware. I want to mention that at the end when I created it he asked me some weird if I want it to be for SATA type hard drive or to be universally U type: I honestly wanted to give it a No but I did like you..I quote “give yes yes and ok until the end”. ? I am waiting an answer, thank you.
On the bottle trapped by 4 g I have succeeded but can not succeed on a 8g stiff transcend gives me an error at the end of formatting the bottle can be formatted from windows can put programs on it is new nero .eroer: formatExerror [11] anerror ocured forming The drive .am tried n times it does not want to work with wintoflash start installation and then blue screen.with win to flash. The whole thing was set to the card set.deci the 4g bot works with both prep8 and wintoflas.de utilities what the Of 8g stutters?
Try to format with this software
HP USB Disk Storage Format Tool 2.2.3
click Here
Dear Cristi all due respect but I think you have omitted to say ceva.Prima time after you do and choose boot option 1 text, but the second time they have chosen the option reboot 2 you forgot to say that I was thinking that there put that stupid 2 who continue setup option and so on, and then I 2 to finish every time.
And the one with the missing hal.dll error gossips on other forums say they have deleted the partition and repartition the hard drive nou.Daca dude like trying to put a second windows on C: or D: normal not us walk. Asha look out inadvertently!
I used hp usb disk storage but without success.'m happy that I funcrioneaza other stick.va thanks for what you do!
good tutorial
but I have a problem:
when I give the stick to boot the I'm ntldr is missing
expect any advice that might help me
The tutorial is very interesting… but unfortunately it didn't work for me. I executed exactly the commands on an xp sp3 with a 2 gig A-data stick… Maybe my husband still needs some up-date to the framework or who knows. I will try this option on a win7 and I will post the result then.
Videotutorial Thank you for the effort!
Returning as promised with the following comment: I realized from another computer and it worked! Videotutorial Thank you for information!
The program works. but if you have an Asus EEE series and it won't work, format all the parts and then it will work. it took me 2 weeks to figure out why it doesn't work. Good luck!
stick bootable done ok
was made
but someone installed windows xp sp that be after him and give him and went without installation error???
Yes, I and others who have seen this tutorial. You can also use WinToFlash to make the stick bootable. About WinToFlash is already tutorial, you'll find top typing in the search box to the right of the black border: Enter WinToFlash and giving
Hi everyone!
This version is more simple than some and it works just like a small problem.
After installation, restart your PC if I give a tree to enter between the windows and I still have an option something like "usb repair not to start Microsoft Windows XP Professional" how can I get rid of this first screen?
thanks for idea
lol.se can make windows xp usb stik run dp?, and how??
Sal got a pretty big problem no longer even figure it out. In short I have a Laptop Myria, and the problem is that I do not go Cd rum, I did think 50 sticks bootable, I formatted hdd but the problem is he does not want to start, I mean formatting partitions, I copy files, I loaded Win XP but fall to enter it restarts and loads forever. PLEASE SOLUTIONS
We welcome and please help me and me
After installation, restart your PC if I give a tree to enter between the windows and I still have an option something like "usb repair not to start Microsoft Windows XP Professional" how can I get rid of this first screen?
Hello,
I just followed the steps in the video tutorial but it is something different to me from what is presented. After entering 1 for cd, 3 for usb, enter 4, then Y for formatting, press press any key to continue and in the next steps I do not copy some files. In videotutorial I see it's ok but not me. What's the problem? I also put a picture to make it better. Thank you very much.
"Http://www.malco.ro/eroare.jpg"
Hi, I did exactly that tutorial, only the part where I give bootsect.exe GRT gives me the following thing: bootsect.exe updates the master boot code for hard disk partitions in order to switch between BootMgr and NTLDR. You tihs use tool to spring when the boot sector on your computer
Run “bootsect / help” for detailed Usage instructions
Can someone help me? Nice thank you!
If you make a bootable USB with XP and stick is over 1 gigs, and I still held him, can I use the stick on it so I stored the data in parallel with other bootable image that I have on it without this affecting my stick and not boot in case I put some files on it.
Please kindly do not know what the book I tried WinToFlash method, I finished text mode and when to get into GUI error system32 / hall.dll. Now I want to try this method but at first they give press any key and it opens PeToUSB not recognize my stick. Please nice thing to do, Windows sees but PeToUSB not!
I followed the steps in the tutorial and I f works well. Thank you very ptr tutorial.
please those from videotutorial.ro I have an error and I don't know why! I followed all the steps .. I got to boot .. I select 1 there with txt mode setup… the windy one loads a bit and then the blue screen !! why?
I solved the problem with the blue screen (I put another windows) but I have another problem! everything goes well, I get to give 1 TXT MODE… ..it loads, I give ENTER to install windows xp and I get to a step where it tells me: Setup has recognized the following mass storage devices in your computer:
- To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows XP, including those for wich you have a device support disk from a mass storage device manufacturer, press S> si ma duce undeva ce doit sa aleg some stuff !! I do not understand anymore ? help please?
Disable AHCI or AHCI drivers included in Windows. More details you will find if you write up in the search box to the right of the black edge: How to install Windows XP on an AHCI configuration or a RAID array, you enter and you will find the tutorial
stick bootable done ok
it's done …………… but how do I install it ?????????? please rasp…
How to make Windows bootable stick 2000?
hello..I have a small problem too..I did everything right..it seems to me the windows to install it..but it doesn't seem like partition C to delete it and put another windows pare it seems to me only partition U which it's Usp..Either from windows PLs Hellp!
I get “NTLDR IS MISING” why?
Mr. Cristi very interesting this tutorial as well as the other will use both WinToFlash unfortunately I failed the first time indicates the path to XP's setup = I and usb mentioned appears after I start windows give something invalid files like this and in the other reason tutorial everything goes ok until state route setup ie mounted virtual image, I mention that I have a Lenovo netbook idea pad s10e and I want to install Windows again I followed all the steps in both tutorials I've presented just as you and I do not understand why I hit these obstacole.Astept an answer, thanks in advance!
for those drives which will not occur
Look in the BIOS and set the Disable option AHCI or IDE or Legacy, by modelulde BIOS.
and the boy who appears u instead of c and d to finish the last question you will! respect
AHCI change DISABLE OR IDE or LEGACY
Change AHCI IDE OR DISABLE OR LEGACY.SI very important something stick NOT exceed bought 2 5 GB.EU someone told PANA MIA 2 GB ONLY WAY IS BEST
When installing windowsu (xp) on the cd that thing appears pressed down or what key to boot the CD, but if you install the stick what? I want to make my stick bootable also up not only the form, I looked at all videotutorialul.
PLEASE MAKE A TUTORIAL WITH NEW WINDOWS 7
Windows Ultimate USB Stick Edition 7 2.0.
MAKE A TUTORIAL WITH THIS PLEASE
Windows Ultimate USB Stick Edition 7 2.0.
I tried on a stik of 4gb a Windows XP CD and Zver sp2 first time I put this on stik windows but the second time I've tried all the windows and I put it on da stik after I installed Windows after not going to tell me that a file has been deleted.
hi cristi're the best end after hearing the whole cd copy of bottles to get the BIOS to boot form the stick /?, thanks
I did exactly what the tutorial looks like. But now I would like to use the stick to something else. It does not format normally. How can I solve this? Thank you.
I followed the tutorial strictete.Toate went ok.
I inserted the stick in the smailo notebook but it doesn't work. I put the stick in another pc… and it gives me the following error: "windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk check boot path and disk hardware. ”… what the hell is he?
I understand that you just stick cd WinToFlash go on W7
Try the A Bootable USB is much simpler.http://www.askvg.com/a-bootable-usb-utility-to-create-bootable-usb-drive-to-install-windows-vista-server-2008-and-7/
amigo what are you saying here is good but it gives errors and it's very complicated tot ..I did it very simple …… with UltraISO V9.36 ,,, you burn the iso image (xp..etc) look at the steps
1. Menu and open file
2. Select and open the ISO
3. Click the Boot menu, and select the option WriteDisk Image (Burn image to disk ..)
4.In That opened the window you have to select the destination USB drive, That we do in the dropdown menu WHERE it says Disk Drive and Give it to record.
5.Una alert todos los que nos Avisar of Nuestra Archivos USB perderán, click en damos confirmation advertence and streams.
6.The process of writing begins.
FEW minutes 7.After happy ending
MERGE AND STICK WITH ANY OF 8 DE16 DE32GB ,,, NO YES ERRORS
Hi, I did exactly as you said with the stick and when I format and finish with the first part (the one with txt) I give the second part (the one with GUY) and it gives me an error like: “windows root> \ system32 \ hal. dll "! says it is missing or corrupt!
I tried to format an Acer Aspire One!
I tried and I give more xp windowsuri same error the second part!
Can you tell me please what can I do?
Thank you!
I don't know why it gives you an error… it may be from xp, if it's pirated !!! Howdy
Hi I'm trying to install a windows on a netbook on the stick…. I do the first part TXT mode and when I go to the 2nd part GUI mode it tells me system32 / hall.dll
Please reinstall or copy the above file
I tried to do it through repair I copied the file from the stick in windows system32 I gave exit then I gave GUI mode and the same tells me…
Do you have any solution??
Hi Toni, try with A Bootable USB. Download link http://www.askvg.com/a-bootable-usb-utility-to-create-bootable-usb-drive-to-install-windows-vista-server-2008-and-7/.
1. A Bootable USB to download application;
2. Press the USB Check button to select the USB stick you will use, and then USB Format to format it. Attention !!! USB format will erase everything from the stick
3. Choose between DVD ISO version or version (choose DVD for the application to take their necessary files on a DVD or ISO to be able to get the necessary files from an ISO image);
4. And we have reached the end point, press the Start button to begin the ISO that create stick with Windows bootable.
5.Dupa has finished copying files from DVD \ ISO image will be going into BIOS midwife select boot from USB devices.
If you provide a desktop and a bootable CD with Windows would be much better midwife create bootable stick.
BAFTA.
Hey, does not recognize my flash drive, why?
Thanks so much for TUTORIAL is very useful
Very good tutorial!
But I have a little problem, after writing the 2 command, namely: bootsect.exe / nt52 x: (x-being the address of the stick)
After pressing Enter the following message appears:
Target volumes Will Be update with NTLDR compatible bootcode.
Could not map drive partitions to the Associated volume device objects:
Access is denied.
Thank you!
bootsecc.exe year is not Recognized as internal or external command, operable file orbatch Program
What does that mean? I would like more help please
It doesn't boot me from the stick and I don't understand why I went into the bios and started booting from the stick but it doesn't… does anyone have any idea why it doesn't
I have a problem…
I Apre error when Windows Puie must stick:
temimage.jpg cannot be copied…
Why is that?
after sitting suddenly the window closes…
Hi, I managed to put windows on the sick, I enter the BIOS, belong installs what the first part of the bios and then to restart my shows "a disk read error occurred press ctrl + alt + del to restart" I tried and 7 windows and the same.
What can I do about it?
Send your thanks.
What do you want to install Windows on your PC or desktop?
What you really want to install it on the stick? It's just a fond ambition or of an optical drive. if it's just a fond ambition of the computer / laptop or an optical drive, then use Windows DVD or CD 7
What operating system you had before installing the windows that say that is not installed?
Windows on which you put the stick must be a clean, unmodified.
The picture you used ISO is not good or be corrupted, it is also likely that you have done wrong and have not been attentive to video tutorial.
Try to put Windows on stick using WinToFlash tutorial which you will find on our site by typing in the search box top right of the black border: WinToFlash, and giving enter
On a Dell inspirion 6000 laptop where the optical drive no longer works, and the only way to install the operating system is the usb stick I have the original cd with windows, I got over that error “a disk read error occurred press ctrl + alt + del to restart ”acum imi aparea“ windows could not start beacuse the following file is missing or corrupt: Windows root> \ system 32 \ hal.dll Please re-install a copy of the above file.
What can I do to get over this error?
Waiting for an answer, thank you very much.
You did not answer all the questions in the previous comment!
It had Windows XP, Windows XP and all I want to put on it, I tried with Windows 7 and go, but Windows XP does not, I changed and I say stick NTLRD is missing, and when I give her the boot wintolflash stick I appears that line and nothing more.
I'm sorry but I have not been paying attention, thanks.
I tried yesterday to install a Windows sp3 the stick, all well and good but he does not see hard drive with partitions related only appears that we stick Windows that list.
The evening I tried on another PC went smoothly (showing all partitions, I installed OS), the only difference was that I used a different windows wide range that we find torrents.
I want to know if that was the problem (windosul who was on stick) or a hardware problem?
I want to know if he put a CD-ROM function (the current is broken) get rid of this problem with the HDD?
I searched for a tutorial on how I could install an OS on the stick with VirtualBox but I found all the installation files are VB. I'd still like to install an OS (Win SP3 exactly) using a bootable stick to see if errors occur and to test bit OS.
I noticed that someone has put the question:
But no one answered, the world was preoccupied with writing much so stupid and pointless on page 5 I stopped reading reviews. I would like to answer even a "we can not help."
Thanks in advance and keep up the good work!
VirtualBox does not support installing an operating system using the stick.
probably not have SATA drivers on the CD with Windows, you 2 options: either stick to integrate SATA drivers (search on google) or if you are installing on a computer with floppy drive, floppy copy SATA drivers for the motherboard Once you start installing Windows F6 hit a write down there. Then after a short time you will be asked to insert disk. After that everything should be ok. Start by looking at the manufacturer's site `motherboard sata drivers. I hope I have cleared up.
very interesting and useful… but .can i make the stick on a car running ubuntu? I do not use windows but be there!
Hello!
After typing (bootsect.exe / nt52 f :), F is the stick I see this message
Could not map partitions to The Associated volume device objects
What should I do next?
After doing all this stick has just reinstalling Windows, right?
I mean you can not format it and reuse it.
Expected response.
Where'd you get that from? you read the text above tutorial? you read the comments? You looked at head-tail tutorial without rewind?
After you have installed Windows using the stick, you can format it, do whatever you want with it. If it's a big say of 8 stickmai GB, you can make a folder in the root of what you want and you can store there without affecting existing windows bootable on it.
Hello! I watched the tutorial 5 times until I decided I had to post a comment '.
I inserted the stick, I extracted prep8-bootsect-petousb, I ran usb_pre8, blah bla all good and beautiful up to bootsect.exe / nt52 m (where “m” is the letter of the stick) siii… it reads like this: 'bootsect.exe' is not recognized as an internal or external command, operable program or batch file.
Think you can help?
PS In the Drive Label in window tutorial PeToUSB write USB_XP_710, while to me it does not say anything.
Please help me if you can. Thank you!
I came back: After the 7- 8,9,10,11 times I actually understood what I had to do… it was a mistake I made, a minor thing I didn't notice.
Thank you on behalf of myself and others. Job done
Good. How did you solve the problem that I realize nu0mi.
The CD I made, the windowsu reinstalled, and you must change the boot order to stick to the hard disk, and do this, then I restart and iimi says:
Windows could not start Because the Following File Is Missing or corrupt hal.dll
What to do?
PLEASE HELP!
after installing XP's start the notebook in txt mode appears as the CD does not find that to copy files and retry options, and I quit. The obvious retry the same message appears.
Hi . it gives me 99% error when I give it to format the stick with petousb 😐 so either the stick is gone (although it is new) or it is too big because it is 8 GB. What other idea could it be? ....... THX
I face the same problem with an 8gb stick
Hi! I managed to put windows xp on the stick but when I give it to install it tells me “Setup cannot copy the file: _default.pif”. If I give it ESC “Setup cannot copy the file: _1349.inf” and so on … Other. What does it mean?
I do not understand why I did not go exactly as video but you do not give 4 nik last time! I say press any key to 2 times and exits the cmd and I do not nik. what's the problem?? /
Use another method to put Windows XP on the stick. Write up in the search box to the right of the black border: WinToFlash, hit enter and you will find another tutorial that will help you put Windows on the stick, not just xp or vista 7 but next time, before posting a review, citestele existing ones. The same guidance is slightly above what another user had the same problem.
Hello! I followed all the instructions given and I eventually managed to make a bootable stick with Windows XP. The problem is: when I want to install, go to create partitions, and then format, and then get to copying files .. and this continues until a time until I know you can not copy a certain file and have options: either retry, and here if I do not solve anything, either skip this step, that is not to copy the file, or get out. If I skip, I encounter the same error for the next file to be copied. Any idea what could I do? Thank you
How do I make a bootable USB Stick with XP… ..from a PC with w7 on it ???
I did exactly as you showed in the tutorial… .. everything went perfectly until the tutorial ended… I still gave yes… ..and now it doesn't recognize my stick at all… .on any computer… .why?… .what to do
Hi, I want to say that I suffered the same thing, that is, I installed the windows on the USB stick that I reached to examine the hard drive, where I found only USB, and then I turned off the computer, I removed the cables from the hard drive and I I put it back in where you can also take out the fan from the motherboard, the plastic plug with the many wires and put it back in, just take them out and put them back in more precisely, and I did this job where I installed again from usb on my re-examination I found the cd and USB partitions, everything went well and I have to do it and I hope it succeeds baftaaaaa …… I want to admit and congratulate this demential site fff much less often so you will be lucky… ..
Hi, cristi I would ask you to help me if you want…
The tutorial is excellent, it works like oil, I did it in your way and in wintoflash and I managed to put Microsoft.Windows.XP.Professional.Corporate.SP2 on a 4 gb stick…
The only big problem is that when I format, when that blue page appears, in which you have to see your partitions to format the partition where you already have windows installed, it doesn't see my partition, it shows me another partition h: with 3000 mb… 🙁 Why doesn't he see that partition I have… 🙁
I mention that I have a laptop (mini-laptop) Packard Bell, intel atom n455, intel graphics media accelerator 3150, 250 GB HDD, 1GB DDR3 rami…
When I bought it, I took it with windows 7 starter, and that windows takes up too much space for its memory… and I wanted to put that windows mentioned above… but it doesn't see my partition…
In leptopu have one partition that I give in my computer C:
How to format appears another partition h: and who is more naked?
Please answer me much more quickly to this post
Thanks a lot and respect for the work they do
Sal cristi when you said that USB is formatted with that petousb program, it gives me an error that it is already in use !! and I can't format it. what do I have to do ?? Wait for response…
I have a problem I installed daemon tools windows xp sp 1 and to install daemon tools says it can not install the old version and want xp sp2 what to do so I can install xp hardware sp2 squeak not read at all there .. what solution? Dak know please help me!
Write up in the search box to the right of the black edge: how to install Windows XP service pack. Hit enter and you will find the tutorial.
This "trick" goes perfectly with the transformation of XP SP2 into XP SP3. I opened the update and Windozu got everything he needed from Microsoft (other than genuine!)
Thanks for this opportunity.
Hi Adrian, very good tutorial, but can not install windows 7 and stick? but on XP? I saw a tutorial and I have to say that Windows 7 7 so I can install windows on usb!
Question e: Can I install Windows 7 on usb using windows XP ??
Yes, use 7 Windows USB / DVD Download Tool. Write up in the search box to the right of the black border: 7 Windows USB / DVD Download Tool, you enter and you will find the tutorial.
I made on a 4Gb stick with a write speed of 10 Mb and read 20 MB all good and beautiful but but problems with booting when I give TXT Mode dau it appears to me: NTLDR is missing
Press any key to restart
But I tried to do it in different ways: I followed the steps here 5 times in a row and the same result, but also with WinToFlash and only a dash appears as Johnny specified…
But I want to make on this stick 2,3 or 4 windows xp, if possible… I'm waiting for an answer…
PeToUSB Error!
Failed To Lock Disk!
can you please tell me how you made your windows appear as "xp_pro" on dextop
I tried to install ..I did everything to where I need to enter the path to the iso window. I get "in DLLCanUnloadNow does not contain xp source files" although it was windows xp, is there a problem with the windows I wanted to install? can you leave me a windows model to try ..
I sal wind 7 as operating system pc and I have a little problem and I do not recognize the stick as to format, but if you want to get the stick can not get it admits ie Windows, but can only try to Make bootable him for not recognizing me, please help me as I did not go DWD XP and want to install wind
Adrian sal you can help me I install a Windows PC Eee PC 900ha. not, managed to install anything. give me an answer by email if you can help me ms more
Very good tutorial!
Well explained very well shown. Thank helpful to me, I would not be able to get along without you.
Congratulations, continue!
I made the stick exactly like after the video, it came out, it also went on the laptop .. but it seems to me that a file was not copied properly .. it is possible from the operating system. very useful video. Thank you.
Welcome. I used a stik of 2 gb and I followed all the steps in the tutorial, I typed all commands and at one point my pc and block all mail and must give him reset the PC. I tried another stick all the 2 gb and confort story. That is the problem?
Read the above comments
This tutorial is not only to put Windows modelaitate stick above another visitor told a different method.
hello, lest be the rami, try on every pleasant place where you 2, or other rami. if you get stuck during installation can be Stay
it locks up during installation? Tries to get many a pleasant frame of it, can be one fault (if you 2 or more). luck
Hi Eugene. trying to WinSetup.From.Usb.v2.2
Hello everyone, I have a question and would like an answer from those who know the problem ... I installed WinXP I typed the registration code accepted but I ask then to activate Windows? 30 within days I can do? Thank you in advance
Activate it on the last day. If it makes "figures" I give you a link where to get Windoaze and I also give you 50 keys to get to your old age. See the tutorial: "How to correctly download games movies music etc-video tutorial" here:https://www.videotutorial.ro/?p=761
Very useful! Again I was videotutorial helpful RESPECT!
Hello, I tried to put Windows on stick ... but I hit a problem from the beginning ... when I open the executable usb_prep8 not read the stick. I tried another stick on another PC ... and still the same problem. can you help me?
thank you in advance
Did you read the comments above? Of course he doesn't put the readings on either
Hello
I have a big problem because that can not stick bootable. In PeToUSB stick ... I do not find at all. I tried to WinToFlash. There is finish installing all the stick, but still does not make it bootable. We selected though the bios and boot from the stick gives me error. It's normal, as long as he did not stick WinToFlash be bootable. Can someone help me? I really need to install XP on the notebook and do not find another option. Thanks in advance.
I forgot to mention that I installed Windows 7 computer and tried to stick bag Windows XP. Can someone help me?
Hi Adrian, nice tutorial.Ce asked eu.NU we stick for now but I read the card and card-4 8 giga.Se can do with this card reader to put his boot and boot windowsuri can that be?
Yes go, it was not necessary to wait for my answer. Do not blow anything if you try to see if it works. Do not skip anything in the air is something that everyone can test and try
Bravo boys .. do a good job .. much I learned through this now is a hacker .. I blame bravo once again. Scared for the others. Be careful .. other way. Will never come out
Tell me please what to do when i open the notebook I give it to the first option and i say there is missing system32 hal.dll.daca someone can help me. Thank you for your understanding.
I have the same problem too. Please help!
Thank you so much guys I rezolvat.va kept crashing though they were the first ones optiune.dati second option and if you do not recognize hdd enter the BIOS and change or disable achi in height or what you have on there
thank you
I have this problem too. how to solve?
Who can I endure to unravel a mystery:
I used a stick 1GB, (function 100%)
3 the fundamental tools available to download section
undrumat the tutorial I followed those steps to put XP on a stick (I think I was careful)
the problem would be different: now the stick is seen "Removable Disk"
the desire of unexplained boot again I have not deleted that windows already on stick
And I wonder when the tool asked me stick format
giving him "yes", I found that the formatting was done in a very short time, 3 sec.
I tried 3 format for the tools:
1. Repair_v2.9.1.1
2. HPUSBDisk
3. cp006049
No results
Who can help me with-n or with another tool tip for to solve this problem
I do not recommend to buy me altu
thanks is advance
sal.am and I have a big problem if I can someone explain
I did stick with Win XP to Win botabil using flash, I installed it but then I hit a big problem, I restart the PC after you take the stick out of the unit could not boot gave me an error that ladies please see insert the boot media so in other words I could not get into the hard windowsu then if I enter windowsu stick but I had to keep loading stick permanently inserted, so call may explain why it does not work I installed win 7 and go as anointed without holding stick in calc.multumesc
sal. I understand you gotta do but I did not understand a thing Cuz I have a usb stik gb 4 8 or is there a problem? ms
Nu
Country people of tottttttttttttttttttt
salut.am and I have a problem 530 old hp I want to give it a gimmick
Cd_Romu problem is not going to and you can not download a windows xp folmatez.am sp3 but reusec to make them imagin.ma can help you
Regards A
beautiful day. to
See the video tutorial: "How to make an iso image with Poweriso"
Hence: https://www.videotutorial.ro/?p=459
See the tutorial: "How to make an iso image with poweriso-video tutorial"
Here: https://www.videotutorial.ro/?p=459
can someone help me?
has a salutary if we stick 15 GB? on the contrary I think it's best ... The more higher the best right? please urgent response if you can thanks
only works with 4Gb or smaller flash. But people are too smart to specify…
Try and you to be more objective! Plains states and beat until you get to the actual operation ....
And you should tell people that you really made a flash 4Gb or less, do not try to flash a 8Gb will not go!
Would have to say that Windows XP can only do this maneuver and as win7 not work!
Would have had to make a tutorial for XP simulator where everyone has win7 ....
You have a big minus for this ... + tutorials that are much shorter and to the point than the boring voice rambling .... hrrr!
Feel free to watch these tutorials if you do not be boring.
NUWe can and do not want to be liking To all, these are new and soWe loveto do the job.You like it
OKWill not like, againOK.Merge's walls in mouth tutorial :)))
Thank you!
I find wind in j not in h and do not go dc?
I have a question
You can make a bootable stick with the laptop?
What makes you think you could not? Since the laptop has an operating system on it, and have USB port and an ISO, what's the problem?
To make it easier to stick with Windows bootable recommend 7 method WinToFlash or Windows USB / DVD Download Tool
To find tutorials, write up in the search box to the right of the black border: How do WinToFlash or DVD or bootable USB stick with Windows 7 using Windows Vista, XP or 7, you enter and you will find tutorials
Sall! In the end, does it work with a stick larger than 15G? I see that one says yes, another says no…
sal.am and I'll problema.am an ASUS EEPC password admin.cum bag and I can sdai windows xp on it and cancel his admin that? ajutatima.multumesc please
Hi I did this all well and good him but I give the pc restart for start formatting's know need to press f11 or del depends on each pc's press F 11 him and then ask me to choose where to get setup to continue and here I am not occur until the cd rom and I 2 2 current HDD and internal HDD stik is how do I select? thank you
Another solution is to buy external optical drive usb :)
The tutorial is good… if I already have a windows installed and I want to install another..But the problem is how could I install a windows on the stick if the computer does not have windows… Please if anyone knows how to help me ([email protected])
Hi, I have win7 and I can't do this maneuver, it doesn't recognize my stick, I could install a virtual car and put xp on it and do this maneuver there "ms in advance"
I followed the steps 100% bootsect.exe until I say it's not acceptable internal or external command.
I need a XP Home Edition that we license but I have cd and can not find any way to make a stick or bootable cd ..
Can I get a solution .. thanks
Salut.am encountered problems after pressing start.imi following error appears. Formatex Error [9]: Another process has open file (s) on this drive.
ms much bro
very bn presented and easy to understand
nice thank me fst very helpful
Hello ! please help me too… it works for me until i go into the run and write “cd c: / usb_prep8” and it says to me like this: The system cannot find the specified path… please a tip ..
Sall.
I formatted the stik but admits they open USB million prep8.
I give up my 4 appears 'failed to open file tempimage.img.the specified.input file system can not finf the correct path'. want to mention that I used needle tutorial programs and I tried several ISO images and even a few CDs of 2gb.te windows.stick please give me a sfat.multumesc
Use WinToFlash, write up in the search box to the right of the black border: WinToFlash, you enter and you will find the tutorial.
Problem 4 step in the tutorial
picture:
http://postimage.org/image/ytuospigr/
Follow this tutorial to create a USB stick with Windows XP. It's simple to use.
welcome and congratulations for tutorials made a real lesson for me but I would really like to do and a tutorial about a program to subtitle the film stick but the operating system will be the real ubuntu linux
I did exactly as you said in the tutorial ..I restart the laptop and it starts..the two optins appear I give text then it starts to prepare the windows when it writes setup is starting it opens an error: A problem has been detected abd windows has been shut to prevent damage to your computer.if this in the first time you've seen this stop error screen, restart your computer. if this screen appers again, follow there steps: check for viruses on your computer.remove any newly installed hard drives or hard drive controllers check your hard drive to make sure it is properly configured and terminated. Run CHKDSK / F to ckeck for hard drive corruption and the restart your computer. I did what izice in the run yes the same problem again I may not understand well enough what he means… what can
Hi guys I followed the above steps to make a bootable stick and it went very well but in the end a problem arose. I started by setting the bios to boot from the stick everything ok it booted and after the installation was finished I took out the stick and now when I turn on the PC it asks me to choose to start the normal Windows or to turn on USB and repair the windows, please answer me that I don't know what to do with it…
Log back into BIOS and set to boot from the hard drive if the USB remained.
Hi, I also have a problem… all good and beautiful until it reads the stick !? I give it start => Continue? Yes => and again yes. When I format it it gives me an error: “Format Ex Error [11] : An Error Occured Formating the drive ". He doesn't want to format it. Strange that from My Computer it goes formatted. A little help please !! Thanks.
Hello!
congratulations for the tutorials you post on the internet you are super cool. I would also have a small problem, while installing windows this problem appeared to me:
Stop: coooo221 Unknown hard error \ systemroot \ system32 \ ntdll.dll
I wonder what'll it be?
the best tutorial thanks a lot
I used a stick 4 Gb to install Windows XP and now I want to format it, but not allow me. Is write-protected. Could you tell me please how do I retrieve it?
Use HP USB Format Utility. You CAN use it
Its helpful and Free to download. - check this link
http://h20000.www2.hp.com/...
And Then You Can solve your problem.
Use this little program from HP.
It's really good and it's free, I solved it.
You can find it here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839
Congratulations tutorial! it works perfectly!
Sal, tell me if it is possible to can put an image in GIF avatar from MESSENGER and can see and those in the list.
If possible, you must to do.
MS.
Hello Cristi,
I followed your tutorial, I did what you said and was able to install Windows XP on an Acer mini laptop. Bravo!
You're very good tutorials.
Thank you very much.
You are the best.
Good luck !
Hi, I also have a problem… .. I follow the appropriate steps in usb_pre8 I give it a double click I enter…. he tells me press any key I give him enter I get a window where I have to start but up he tells me no usb stick found I have 5 different sticks and as a space and as a company someone knows what I have to do please help me I need help… .
Ms beautiful!
Right click on "petousb" and choose "run as administrator" and then it will see your stick / s. Good luck
Hi… I have a problem too…. I did the same as in the video I left the archives where they had to be unzipped I entered usb_pre8 I got press any key I gave enter the window with Start appeared but I couldn't click because it tells me no usb stick found and I 5 sticks of different sizes and companies I really don't realize it doesn't work… .. I hope someone will help me
Thank you. Goes on the card.
Nobody can give me some advice?? I need a more special stick I know what I do not have to go?
Try using WinToFlash. We have tutorial about Aesta. Go to the SEARCH box in the sidebar, top right and write there: WinToFlash, press the Enter key and you will find the tutorial
all well and good but how por create iso? I have a cd with xp botabil and I want to put XP on a stick, I understand the steps you told me to follow but I iso and do not know how to do, I downloaded daemon tools lite and do not know how can create ISO image and Kitu escritoriu you have you on there, can you help me pls
I also have a problem: when I boot the windows from the stick it gives me the error: NTLDR is missing, press any key to restart. I tried with several windows (xp sp3) and it gave me the same error. a solution idea I'm waiting for…
Iso image downloads from the internet and write you on a torrent site or why you prefer Windows xp.iso
Please ajutatima and mine.Eu me do exactly that after you make tutorial, 4 "I wrote appears and click on something to keep and closes the window, please ajutatima!
Why do not you read the comments? to all the reviews for this tutorial said that there is sooo much easier method. Go and write SEARCH box located in the sidebar above right: WinToFlash, press Enter and you will find the tutorial. It's much easier with that tool.
I did everything it says there without problems I put the stick as a boot priority in the bios but no mention of booting from the stick….
I tried both methods, this one has the same problem as Valentin with "No USB Disks Found", and with WinToFlash I go to the moment of truth when I have to install it, because the netbook only sees my USB, like a hard drive disk, does not see the partitions, and so I have nowhere to install windows
View the BIOS to have AHCI enabled. Write the SEARCH box in the upper right sidebar: Some brief explanations about the BIOS, press Enter and you will find the tutorial. You can also integrate AHCI drivers in Windows. That box seeking SEARCH: integration AHCI drivers in Windows, hit enter and you will find.
Like I said, if you have AHCI enabled in BIOS, disable and if you have disabled when Enable
hello. I have a question I ask tell me how WIIW 2.3 a usb sal do bootabil.multumesc more
'bootsect.exe' is not recognized as an internal or external command, operable program or batch file. WHAT DOES IT MEAN?
I did everything by the book and it is very convenient okfunctioneaza not staying with me CDs after I took a stick 16 GB win him esteem programs etc. all Drivers!
I also have an acer aspire one 110 notebook and I followed the steps, but when PeToUSB opens it can't find my usb… what to do, make it clear I don't have much with these… thanks!
Hey, do this work on Windows 7 Ultimate, and when I access my usb_prep8 pc restarts, why?
Bye. I followed all the steps until I got to: bootsect.exe / nt52 h:
and it came to me:
target volumes Will be updated with NTLDR compatible bootcode.
Could not map drive partitions to the Associated Devices volume objects:
Access is denied.
What did I do wrong or how to correct?
thanks
hello friends I have a problem when someone strong dc from me im upload speed dowload decreases why and what we should do clicknet power 30 mg dowload
and fack dowload the 1,37 mg
because it is in parts viteza.inchidele downloading them and click go and I still have 10mb
closes its net click is slow to speed up and those decreases
Iara deageaba can quickly connect and disconnect disconnect its Iara connects ETSI not vreon schedule for pload
then see what files and upload them to share.nu scoatel think there automatically give out his schedule and if you give slots cut out of the hub
thank you very much
I made a bootable stick after this tutorial but the problem that I have is that I want to start to boot due to an error that has become annoying at some point.
That erroare is:
"Windows could not start Because the GMT file is missing or corrupt: \ system32 \ hal.dll.
Please re-install a copy of the above file. "
The big problem is that even in safe mode can not go, whatever I do I try to give erroarea above.
Returning to boot Stik instead to give me access to tells me to boot the press Alt + F10 and Atheros Boot Agent setup menu.
We have tried all options given in that page but Windows still can not install it.
Can someone help me to pass these obstacles?
Thank you very much.
How can I get and I video?
I did Stik XP is very good! Thanks for the tutorial, your effort for us!
Hi, I have a problem too. When I give them to boot from the stick, it doesn't see my hdd-u. And instead of the other partitions appearing, where to install win, there is a pause… the stick appears on C instead of hdd. Can you help me with this problem?
if I have an older laptop… and it doesn't have the option to boot from usb in the bios ... do I have any chance to format it by this method with the stick?
I have already tried 3 times to make a bootable stick with Xp and I didn't succeed, after I finish giving all the commands in cmd when I get to give ,, 4,, it writes ,, press any key to continue ,, press a key and closes my window….
What could it be?
I tried to make it win to flash but I still failed…
Thanks so much Cristi, the best tutorial!
I have a problem I do not find stick u please help me I only know what he doing.
PLEASE HELP!
I did everything in the tutorial but when I gave 4 appeared to me a car window that says: Would you like to damage the existing tempimage.img? and if yes then give me yes and I filed at all and if I close the window closes and I will)) what to do? help
I forgot to mention, the stick is 8gb!
take that program from HP to stick you in another comment above link for download! Itri in it and choose the first option, restore files. After finish usp_prep8 formatted in the black window opens press any key and skip the formatting's stick! go directly to the next stage! enter the run cmd, go out with the youth stages and must go! Bafta!
I give the same error k and cosmin when I start usb_prep8 I see my stick and do not format it. "Form Ex Error [11]: An Error Occured Forming the drive" I got that program from HP and what to do with he? I've tried the first option to restore my files and still does not want it!
How do I get that program?
Why do not you read the comments? to all the reviews for this tutorial said that there is sooo much easier method. Go and write SEARCH box located in the sidebar above right: WinToFlash, press Enter and you will find the tutorial. It's much easier with that tool.
I don't know what the program is about and I couldn't find the 'download' link above, if you can and want to leave it at this post, thank you.
the best and most original good does its job properly so much for tutorial ms are still great success. Respect
Hi, I set the stick as hard primary and get the error:
Could not open drive multi (0) disk (0) rdisk (0) partition (1)
NTLDR: Could not open drive multi (0) disk (0) rdisk (0) partition (1)
Troubleshooting?
In that section you set BIOS hard stick as mayor?
I think I tried to do 3 times that stick bootable, but still will not boot. Make all necessary commands, we have already learned and no longer need never see the video. After the end of the process cmd, stick out, stick it in place, will not boot. Restart the computer (with an older bios believe, do not recognize the stick) again, not boots.
Suggestions?
resolving this error, please help me someone.
"Windows could not start Because the GMT file is missing or corrupt: \ system32 \ hal.dll.
Please re-install a copy of the above file. "
Problems with USB-enabled format. It gives me error message: "Error Formatex [11]: An Error Occured formating the drive. As is that USB is the 8 GB. Is it because it is too large USB?
Use WinToFlash about which we already have tutorial. It's much easier, an application with a graphical interface, you click on some "buttons" and then on some "next ones". Type up in the SEARCH box in the upper right sidebar: WinToFlash, press enter and you will find the tutorial.
Cendant I started installing everything ok
problem is I can not install on hard
I look at my installation guy just bottles
what to do ?
I performed all the steps and give you a message 4 Would you like to dete existing tempimage.img?
I also say the same to delete existing tempimage.img?? Anyone know what is?? Dolea u gave him head?
Bootsect.exe / nt52 f (ef sticu in mn) does not work! I say it is not a recognized command
you do about it?
Use WinToFlash which we have already tutorial. It's much easier, it GUI application, click on some "buttons" then some "next-s". Write up the SEARCH box in the upper right sidebar: WinToFlash, press enter and you will find the tutorial.
Merge installed on a mp3 or just stick?
I 4 gb stick and I did not read it PeToUSB. says: No usb disks found What could be the problem?
I have the same problem too. So can anyone help?
It happened to me just for caincercam do stick with win7 but I tried another step with xp installed and I went there I detected the stick and then I followed all the steps and managed
bootsect.exe nerecunoscuta.dc order? we did toate.ast answer pls.thnx
Is it because they use to win 7 on USB? today rasp. ms
Everything was successful but when I do not restart boot stick figure.
I have a problem when they reach y / n y give you enter and then closes automatically
how can I go on the internet when you install Windows XP now called Addicted go but I have windows xp call 7 7 like sami please tell
First after installing Windows XP you need to install the drivers. Without drivers, the operating system will not recognize the hardware components of your PC (video card, network card for internet, sound card, and so on)
After you install the drivers for your motherboard model will be doing basic internet connection. Only you are the one who knows what kind of Internet connection you have and we can not help you in this regard.
Installation disc, xs_pro, where did I get it?
Two problems.
1. I made a bootable stick with win7. When I try to install it near the end and then restarts the computer does not continue work remaining black screen in the beginning before installation.
2. I bought a stick 32 GB and my computer can not install it (do not you see, I have XP). I tried on another computer and went including 7 win.
I followed all the steps and it went well, but when I have to select 1 (where I have the xp) it gives me: “please ive the location to your windows xp setup source files 'cscript.exe' is not recognized as an internal or external command, operable program or batch file. what I do?
1 point I heard in my life
be sure he knows that 1 is not the letter, but the number… just that he was wrong… so… don't be like that anymore !!!… thanks for the tutorial… ft useful !!!
Hi, I have a little problem where I got stuck, I do not know what to do .. I did everything the same as you. The thing is even going buteaza but the biggest problem is that I do not see any partition is even more strange that I see as a USB partition. Maybe you can help me, I hope to answer me quickly. Thank you.
Hi, I managed to do exactly as you did above and go all, the thing is that I do not see any partition and what is even stranger sees my USB that partition. That's normal? I hope to answer me quickly. Thanks
give esc when you see only occur partitria stik and the other
Everything went perfectly .. Thanks for the Tutorial… Success Next 😡
Hi, I need help
Who can help me solve this problem?
http://intreaba.videotutorial.ro/sistem/probleme-cum-se-instaleaza-windows-xp-de-pe-un-stick-usb-bootabil/
Thanks a lot!
you have to give to YES or NO
Would you like USB-stick to be Preferred Boot Drive U:
In case migrate.inf That is Changed with MKMgrateInf2.cmd
for Mixed SATA / PATA Config: Don't change mograte.inf
For Bootabe USB-Harddisk: Don't change mograte.inf
YES or NO?
I followed all the steps in this tutorial and in the one with wintoflash, but after I boot, I first choose 1 text mode then it does what it has to do, it gives rr and when I choose 2 GUI it gives me missing file \ system32 \ hal .dll …… .help me please who do you know
\ System32 \ hal.dll
Good evening, you better make a video tutorial about "wintoflash" I installed it and and I can say that it is much better than other utilities, I used it to make a stick with windows 8 bootable less battery head, I want to thank you for bringing us new tutorials weekly, many things I didn't know at first when I started repairing my pc, I've been watching you for a long time with interest, especially on the side of installing new programs that to solve your affairs with less hassle.
I'll try it on a Win XP and went to say whether
ps. link not know if it ala http://www.softpedia.com/progDownload/WinToFlash-Download-136622.html
Hi all, I have been using this tutorial for a long time and I want to tell you that every time it worked for me… so far when I tried on 2 sticks, 1 of 16 Gb and another of 8 Gb and both when I format with prept8 at the end I get this error: FormatEx Error [11] An error occurred formatting the drive: From what I read on the net it would be something fat32 or 16 and that this program goes up to 4 Gb. How do I solve it? Please help. Pixy.
For BachusTeam
Format USB as NTFS / 4096 bytes.Cu this formatting can put USB files larger than 4 GB.
Click derapta USB you want to format / format.It. / NTFS / 4096 / Start.
Before you format your USB Check for important files on it.
Hi, I have windows xp and when I format the stick… in those headers I have nothing like this:
Capacity: 7.22 Gb
File system: Fat32 (I have another the selection.)
Allocation unit size: can not select anything
Volume label: is empty
and those boxes 3. both.
Install one of these software and try to format the USB to him:
9.1.1 EaseUS Partition Master Home Edition or MiniTool Partition Wizard Home Edition 7.6
Both are free
I performed all the steps and give you a message 4 Would you like to dete existing tempimage.img? can you help me please?
good, can anyone say sami dc bootsect.exe not open even if I give run as administrator. ie window opens but disappears
stick to boot Windows will, will go only tried me on windows xp and windows vista will not go 7 have a blockage in RUN. And if you stick with, that they will say stick is not found because the villa is not found because of trying to give your PC the PC reset and after try again.
And I tried to make a bootable stick with Windows XP Windows 7 dupe and not working. Reach the final steps to permanently closed CMD .. If you know a solution how to do and I stick with XP after win7 and leave me a link to something.
Formatex Error [11]: An error occurred formating the Drive
lol not going pff
Exactly look and me. Why?
You can make a video tutorial how to connect your camera or digital video to our use it as a webcam. What can be done?
I need a little ajuot here! I did exactly as you say in the tutorial, everything went exactly as you showed in the video but then I came to enter the BIOS first boot device to usb but not baptized nick, pursisimplu loading Windows without anything happening. Please I need help urgently!
Hi Cristi, I honestly learned a lot of "Tutorials" from you, I have a problem please help me, I have an ASUS K52F Laptop before I could install Windows XP and I still tried with different Windows XP, but unfortunately not I can still install it shows me a blue page at the moment something like, "No hdd dedected" and so on. But I can install Windows 7. I used to use two Windows on the same 1TB HDD Disc with each 50.000 MB (50 GB) partition. PLEASE HELP ME WHICH IS KIND AND I KNOW THAT YOU WILL HAVE A RESULT FROM THIS TROUBLE. thank you
Disable AHCI in the BIOS to install XP, also can you make a Windows XP that contains drivers AHCI. But if you have a RAID array will be reninti it to u to make a windows with integrated drivers.
See the tutorial on something we have ..
Hi guys, I also have a problem for 3 days, I'm on the lookout and I don't mind am .. I have a netbook without a Rom CD drive, I installed Windows from a USB stick
after ending my pc restarts this error occurs
Because Windows could not start the GMT file is missing or corrupt
WINDOWS ROOT SYSTEM32 hal.dll
Please I need help will be grateful
mss but I have a hard on that yesterday I installed Windows and you turn on your PC with the same hardware and all my black screen appears a dash beeps and does not want buta what to do?
I have a problem. everything works perfectly but when I press 1, this appears to me: [Input error: There is no script engine for file extension “.vbs”] Can anyone help me please? I have windows xp dark edition and I want to install xp sp3 ..
Hi, I followed the tutorial step by step until "1> Change XP Setup Source Path, currently [] '
Do the same as in tutorial DVD selection Sp3 virtual Windows XP. but says
"Please give the location to your Windows XP Setup Source Files"
I tried several ISO images with Windows.
Hello .. it's simple after you follow the tutorial
Welcome. I tried exactly that Videotutorial, but when I came home from PeToUSB reads:
Error Formatex Ocurred formating the drive. I have a USB stik Kinqston G3.de 8Gb. Tips? or quit?
Hi Cristian, I also have a small problem, when I install windows after usb, my name is hdd, meaning the partitions that only have the usb stick… what do I have to set for hdd to appear ???
where gasesx xp_pro?
I exactly followed the steps and everything went perfectly. Now I'm at the blue screen where it formats… I'll come back later with details to tell you how the process went. Cristi, I hope it goes all the way because I've been struggling for 4 days with the Acer Aspire One D260 netbook. I tried all the programs for booting, installing, copying, etc. and none helped me.
I hope to succeed this time. Revin
go this way. 2 years ago I worked hard until I managed, with a similar method, also on hp mini 210. Now I've tried several days to realize that you have to put an image that contain the sata drivers. I tried including version here:
https://videotutorial.ro/rufus-cea-mai-simpla-metoda-de-creare-a-unui-stick-usb-bootabil-cu-windows-xp-tutorial-video/
but that did not work. I just do not see the stick with this version. I've tried other versions, all without success.
therefore, only one worked, is this version, provided you use a picture that contains sata drivers. otherwise, the HDD will not be seen by the computer. thank Christ for that movie helped us
Good evening.
Trying to put XP on the stick.
I have a problem. The format's stick (8 GB) I see the following message:
"FormatEx Error [11]: An Error Occured Formating the Drive".
I admit. I slouch.
I tried with two sticks us.
Please tell me where I'm wrong.
Thanks for the possible answer.
maybe your PC is old and deaia do this around, some older computers can not handle more than 4 gb sticks
stick with win xp is only with certain software
Why not try to win or win 7 8 not need any software you go directly from command prompt
but the condition is that the PC that the surgery was Aiva win win 7 8 or installed
see this is a tutorial made by Adrian in showing us how to do
Lost:
Z570 Lenovo Laptop, Windows 7.
I just happened to stik the 8gb not a complete formatarea.Folosind WinToFlash which uses PeToUSB specify max stik 2gb so Trabant same happen here.
Hello,
Return to the same problem.
I followed all the steps outlined in this tutorial. I used a stick 2 GB. Merge.
The problem is that I use a stick 8 GB to put him and other helpful programs.
I tried several 8 GB sticks, but it appeared an error message when formatting was near the end (and going hard formatting). The whole operation runs on a Lenovo laptop with Windows Z570 7.
Where wrong or why not go all the way formatting?
If normal format them in windows 7 is ok.
Thanks for the possible response
Good evening.
I ALSO HAVE A PROBLEM AT THE BEGINNING, HE TELLS ME "NO USB DISK FOUND"
I tried 2 sticks
ANY SOLUTION?
THANK YOU
hello!
can you help me and me?
usb_prep8 launch when I do not appear like you .. I look like
http://s52.radikal.ru/i137/1312/88/70c3a0d43e91.png
Hello, I have a problem when I install Windows XP, after you boot to give me when I give Installing Windows start-date out of a blue screen, I can helps?
Hello,
I followed the instructions and was able to reinstalex XP instead of Linux I formatted partition C.Am two issues:
1 - I don't know what change I have to make so that XP can boot without STICK…
2 - I can't install Office 2007: it tells me I'm missing outlkLR.cab even though it exists. I tried all the methods presented in similar cases and still it doesn't work…
Thank you in advance.
I greet you,
When installing Office 2007 OutlkLR.cab ask me how that would not fly, which does not happen inainte.Ma can anyone help?
Thank you.
Hello. I went through the steps with “sanctity” and at “prepare windows xp localsource for copy to usb-drive”, at “4> make new temp image with xp localsource and copy to usb-drive”
“Failed to open file 'tempimage.img'.
The system can not find the file specified.
imput correct path: “
How do I get Windows XP? please explain better and I just grt 13 years to learn that I hurt pretty often
Why do not I see BIOS stick to boot Windows XP on laptop BENQ A52
I did the BIOS settings I put on the first USB KEY
USB HDD
WRITE DVD
HDD
PARTNERS
give to boot the WinXP and the installed hard potneste please ajutatima how to make a warm boot xpul
the method doesn't work on win 7 the petousb program doesn't recognize any usb only on win xp it works, and on xp it gives me a formatting error with the petousb formatting program so I did it manually otherwise everything is ok, I mention that copying takes as long as installing windows xp about approx. 30 min with a Kingston dt mini 16gb stick of which used 953mb ………… I had no smaller stick…
The method is greatly simplified using Rufus tutorial which is already on our site. You'll find using the search box top right.
1 stick Gb good? and still do sal see something like bios? mss fain
Find our tutorial on "Some brief BIOS explanations" with the search box at the top right. There my colleague Cristi explained how you set up to be able to boot from the stick
Why not let me stick reformates?