Buyer's Guide as we choose the source for computer - Video Guide

Hi friends, today I am going to offer you some information regarding the sources that feed our computers.
Source is an essential component basically PSU (power) power feeds all components of a computer, as everything in this world and there are many sources on the market, it just makes us confuse when they have to make a purchase .
Many know that they have a 450W source and about the "motor" that powers the components, to realize, I can tell you that there are sources on the market of 500W at 50 lei and 400W sources that cost 300 lei, now it will imagine that power is not a main criterion in choosing the source, in fact we are interested in the power that the source can give to the components, not the power absorbed by the network (in the case of bad sources). You probably don't understand much now but I'm sure that after watching the tutorial you will have a much clearer picture.
Many of you have a poor quality source in your computer (400-500W), these sources are the ones that come equipped with cheap (bad) cases, in popular terms they are nicknamed "pans" or "meatballs". There can be no question of quality, there are some sources that do not offer any protection, and even more, these sources consume a lot and make a lot of noise.
A basic rule when we want to buy a source is not to take cheaper sources of 150 lei (50 dollars), just up from £ 150 can find quality sources, that if we know what we are looking for all sources show almost the same.
A good source means: Active PFC, Short Circuit Protection (SCP), overpower protection (OPP) Overcurrent protection (OCP), overtemperature protection (OTP) Overvoltage protection (OVP) Undervoltage protection (UVP), efficiency above 80 + 4 + 4 / ATX connectors 8 at least two PCI-E connectors, SATA 6 at least a line of at least 12 45V or at least 4 20 lines for 12V.
As riscm not well known producers to choose: Enermax, Corsair, Seasonic, Fortron, Thermaltake, etc..
For starters it would be good to establish what authority should have the power, for it can use an online calculator designed for this.
http://www.extreme.outervision.com/psucalculatorlite.jsp
After decided I must go to shoping power source must be produced by a company dedicated to, if we can say loosely noname sites I threw money out the window.
It would be appropriate to pay more attention to the sources, in Romania we go a lot on preconfigured PCs, to know that the stores that build systems have no interest in putting a good source in your system, most of the time it goes on the source from the 100 lei “frying pan” carcasses.
If you want to enjoy and get your system performance, you must have a source of quality out of system health while earning the electricity bill, sources with Active PFC and high efficiency with a low consumption, so the price source will be amortized over time.
Our recommendations:
Silent System:
Seasonic fanless X460
Media systems:
Cooler Master GX - 550W
Enermax Liberty ECO2 - 400W
Corsair CX500 - 500W
System performance:
Enermax MODU 87 - 600W
Corsair AX750 - 750W
Seasonic X-660 660W
Seasonic X760 - 760W
System overclock, SLI / CrossFire:
Enermax Revolution 85+ - 850W
Fortron Everest 1010 - 1000W
Antec TruePower Four - 1000W
Cooler Master Silent Pro Gold - 800W
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 500 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.

Instructions for use videotutorial.ro

Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.

Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.

Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !

by Cristian Cismaru

 

 


Related Tutorials


About Cristian Cismaru

I like everything related to IT&C, I like to share the experience and information I accumulate every day.
Learn as you learn!

Comments

  1. Yes, a totorial bit long but interesting, Cristi, you know CEMI love you, you know how to explain clearly and + at this more and receipts remove a joke. ms

    • AdrianGudus said

      Omega: Yes, a little totorial long, but interesting, Cristi, you know CEMI love you, you know how to explain it very clearly and + May remove and receipts a joke. Ms tutorial  

      Day "sarutmana" it's free and learn ... You do hear it long Domle .... stop looking ... someone puts you look? It would be better to not have the where? not be at all?

      • AdrianGudus:
        Day "sarutmana" it's free and learn ... You do hear it long Domle .... stop looking ... someone puts you look? It would be better to not have the where? not be at all?  

        Ehehe, the ones with you, it's like you haven't eaten, "Yes, a long tutorial," but interesting. Simply nowadays time is precious, I look with pleasure. All my greetings.

  2. Hi Cristi, very good tutorial. I have a question myself. Why did you quit the browser work?

  3. Very very hard these guidelines. They are very useful. Congratulations

  4. sailorriver said

    Excellent tutorial, master… we are waiting for other tutorials related to the characteristics of the various components.

  5. AdrianGudus said

    Still many things were said, if you think you will learn IT in 5 minutes cheated enormous (as in your conception so both should take the tutorial ... 5 minutes or possibly someone to give you some injection to make them in the brain and so suddenly after injection to be demigods in all)

    • AdrianGudus: Still many things were said, if you think you will learn IT in 5 minutes cheated enormous (as in your conception so both should take the tutorial ... 5 minutes or possibly someone to give you some injection to make them in the brain and so suddenly after injection to be demigods in all)  

      You're right.

  6. AdrianGudus said

    Rectify: injections, and brain… that's how you hurry

  7. mastercrool said

    good tutorial

  8. Antec true power source is external fan to understand that it's a bad source. Here are wrong with your statement

    • ionut: Antec true power source is external fan to understand that it's a bad source. Here are wrong with your statement  

      There is a very good source, the fan was on the outside because there was no room inside sources are built on standards, those from Antec chose this solution to cram as many components inside, so they put the fan on the outside.
      Not the most elegant solution, the estimate is that the performance has not been sacrificed.

  9. You know which is the best antivirus?

  10. cristian watermelon said

    you can make a tutorial on Microsoft Mathematics

  11. corsair ax is 1200 100% modular

    • ionutCorsair's ax 1200 100% modular  

      Yes, sources Seasonic and Corsair (all Seasonic) now come with modularity 100% honest I do not like this method, connectors (24 and 4 4 +) must be perfect cover must be made of gold or something to avoid oxidation.
      Here is the copper wire connecting an aluminum one, after a while there is a reaction and contacts are not really that good, easy and can easily catch fire Heat to use this starter strip or solder contacts.
      Although I do not like this method, I can go into the hands of the Seasonic, they know better what to do, just do it for a 30 years have chosen this solution be thoroughly tested before stabiitatea durability and connectors .

  12. I'm Cooler Master Silent Pro Gold 1200 and haf x case, although I do not need a large source so I thought that she will not have to change so easily

  13. Very good this guide much expect a guide to sources. Referring to unite as they say is too long tutorial I am just on the other side, namely prefer tutorials / guides as long as extensive as that just call themselves guides / tutorials.
    Eagerly anticipated guidance related to choosing a UPS.
    Bafta further.

  14. scump dom'le scump.

    • gioni: Dear sir expensive.  

      There are also cheaper sources, they are good but they are not very "future proof", if you don't have a new motherboard and high-performance video card you can find something up to 200 lei.
      I tend to use a source on the board 2 generation + processor, a good source you get smooth-5 6 years, that if you get something good from the start.

  15. Very, very strong tutorial, it's really useful, we are still waiting for guides like this… Good luck in the sequel!

  16. Very useful this tutorial really wanted to hear something about their sources.

    And now let me tell you something. Those Cristi who write 450W - 500 W those with small cooler you know how to tell them what pans, what meatballs, crackers directly I call them or no-name those immediately burn, or a capacitor swells and you have to replace it good if it's out of warranty. From that site where you calculate the power of a source that you have, it gives me 350 W and I have a 450 W Chiftec calumea source that produces 440W real, it has PFC Activ. cooler I think 80mm, but I have the source down not up that it's better not to heat with an E120 it's ice source. And something I want to tell you right now the mains voltage has dropped a bit, I think under 8200W that the light bulb turned off almost the whole room, but the PC worked without problems, if it has a quiet and real source with a video card hd150 that consumes 5770V and went plus a raid 12 between two hdd. So Cristi source tapana right? Only the net stopped so much but he went, what if he doesn't have opp, ocn, ovf all that he has inside her, she knows how to handle it. Good day Crsiti I hope to see what you say is my pc genius right? I have 0W and with the site it looks like the recommended 450W hard right?

  17. I like most of you because it explains the most and show us even if tutorials are long but worth your time!'d Like please if you want to do a tutorial on all components: video card, memory, motherboard processor etc.si monitor, speakers, keyboard, mouse, (a whole computer) the latest, cutting edge uitandune us the money and the quality of art, excluding price-quality calitatemai whatever and just about money! ! Quote Me!
    Thank you!!!

  18. I really like long tutorials that-s more detailed and complex celolalti not like they're longer to say thank noi.Eu are free and learn things I personally learned a lot from voi.Cum say even if you were me, I like long but worth the time they're complex and you still have a lot to learn and you learn a lot!'s a lot of food on this site!:-bd

  19. Hi Cristi :) very good tutorial I really want to get some new components and I didn't know what source to buy… how can I contact you cristi to show you what components I would like to buy and recommend me a source: D if not maybe that's it. Thanks anyway for the tutorial!

  20. Very good tutorial. I thought and I change my source, but I've changed a lot and if your PC can take several months are all one. I have a "pan" of 3 years of PC's, but I had no problems with it so far (450W Intex ~ 45LEI at a store in the city, has only 1 x + 20 4, 1 x 4pini CPU 1 x SATA, FDD and 1 3 x x ATA).

  21. never cry! What does this Adrian have? it's like he always has his ass smeared with hot peppers, or you play the role of a good cop-a bad cop… .. it's kind of ugly to bark at everyone.

    • clujanu: May Christ! What is adrian this? if the bottom is always smeared with chilli, or roles as good cop-bad cop ..... it's kind of ugly to bark at everyone.  

      Let them eat their asses because scratching is free…

  22. I have a Raidmax power 6 years and I gave it a little at a time and motion ala 500 year today goes well and we all PCI slots filled and 3 colere and has 450W and not scat video card voltage below The 11,97v

    • Felix: I have a Raidmax power 6 years and I gave it a little at a time and motion ala 500 year today goes well and we all PCI slots filled and 3 colere and has 450W and not scat video card more voltage 11,97v down  

  23. I have a UPS when it anafara current energy else I do not know if you want it vrun tutorial

  24. Very good tutorial but you never know Christ as current totals

    12V multiple lines that would say 20. This keeps more

    marketing, namely: these "marketing people" what they do not tell you is

    Each of these multiple lines can deliver a current of up to

    20,But they can not do it all at once. More

    Briefly, the multiple lines 4 12 20V with every means you can not have a

    current to the line 80V 12. If you wish, you can demonstrate

    this.

    • RobertVery good tutorial but to know Christ as never account for multiple curentulliniilor 12V that would say 20. This keeps more
      marketing, namely: these "marketing people" what they do not tell you is
      Each of these multiple lines can deliver a current of up to
      20,But they can not do it all at once. More
      Briefly, the multiple lines 4 12 20V with every means you can not have a
      current to the line 80V 12. If you wish, you can demonstrate
      this. ;)   

      So it is but it's good to know that you 2 eg video cards and have minimum requirements 24, if you have two lines of 24 can put two video cards.
      Normally you can not collect but it's good to know you have that power your lines.
      In other news, there are manufacturers who are clever sources, they can add up to need more power lines 12V, this option is called Rail Fusion.
      http://www.mushkin.com/Power-Supplies/Enhanced/550300.aspx

      Or better:

      http://www.mushkin.com/Technologies/Product-Features/Power-Supply/RailFusion.aspx

  25. Interesting tutorial even if it smells like a post is a paid article.

    • zam77: Interesting tutorial even if it smells like a post is a paid article.  

      Okay, you've exposed, sources admit that all manufacturers we spoke we paid good money, not to mention Emag ...
      I feel ashamed to go into the ground.

      • alexandru: Why my comment was not published  

        Cristi-admin: You broke recognize that all manufacturers of sources we spoke we paid good money, not to mention Emag ...

      • Cristi-admin:
        Okay, you've exposed, sources admit that all manufacturers we spoke we paid good money, not to mention Emag ...
        I feel ashamed to go into the ground.  

        No offense but it seems the article paid if you put links to production or not, it would have to guess, but that's all going to Emag. Anyway what you do on this site is very ok and you really should take advantage of the traffic you have, (in fact I teach you!!), this is not about shame, paid articles are everywhere and probably some money out of them.
        Good luck further, you're good!!

    • View Product said

      zam77: Interesting tutorial even if it smells like a post is a paid article.  

      If we go by your reasoning would mean that from now on all buying guides would actually disguised advertising.
      Cristi experienced before entering the emag.ro said aloud ("EMAG used only as an example, you can buy where you want").

      • Cristi-admin:
        You can try Enermax MODU87 or PRO87, some sources also super strong: Season Series X: X-560, X-660, X-760, they have a top-quality construction, the fan does not start until after [the load over 20% when the fan starts is hardly sounds like a super Sanyo DENKY only cost a fan $ 20 this means dick.
        The Seasonic lines are even nailed to load source 120%.
        You give your money to buy the tool.  

        Cheaper alternative sources are sources Seasonic X Series AX series from Corsair.

        View Product:
        If we go by your reasoning would mean that from now on all buying guides would actually disguised advertising.
        Cristi experienced before entering the emag.ro said aloud ("EMAG used only as an example, you can buy where you want").  

        You have someone to talk to, novel in general is obsessed with conspiracies.
        Advertise masked what? All good sources, I apologize that I have not recommended sources 50 lei.
        Why would not advertise the front, you would have to disguise, not looking at me nicin CNA.
        KFC
        McDonalds
        Computer Warehouse
        Ultra Pro Computers (bankruptcy)
        Azerty
        Emag
        PcGarage
        ShopIT
        CocaCola
        Pepsi
        Mercedes
        Kent
        Danone
        Microsoft
        Samsung
        LG
        Nvidia
        AMD
        Intel
        Firefox
        Salam
        Sausages
        Brandy
        Beanie
        Tuborg
        HTC
        Nokia
        Android
        Cico
        Brifcor
        Chocolate with Rum
        Eugenia
        Gealan
        Durex
        Joye EGO
        Tusnad
        Biborteni
        Santal
        Sibiu Salami

        Mamaaaa, what money did I make …….

        • SideBySide said

          Cristi-admin:
          Cheaper alternative sources are sources Seasonic X Series AX series from Corsair.
          You have someone to talk to, novel in general is obsessed with conspiracies.
          Advertise masked what? All good sources, I apologize that I have not recommended sources 50 lei.
          Why would not advertise the front, you would have to disguise, not looking at me nicin CNA.
          KFC
          McDonalds
          Computer Warehouse
          Ultra Pro Computers (bankruptcy)
          Azerty
          Emag
          PcGarage
          ShopIT
          CocaCola
          Pepsi
          Mercedes
          Kent
          Danone
          Microsoft
          Samsung
          LG
          Nvidia
          AMD
          Intel
          Firefox
          Salam
          Sausages
          Brandy
          Beanie
          Tuborg
          HTC
          Nokia
          Android
          Cico
          Brifcor
          Chocolate with Rum
          Eugenia
          Gealan
          Durex
          Joye EGO
          Tusnad
          Biborteni
          Santal
          Salami SibiuMamaaaa what money I did .......  

          When I started reading the list I laughed, but when I got to "durex" I laughed out loud :)) One of the things I like about you, Cristi, apart from the way you explain, is the fact that in all the tutorials you introduce and a joke :)). Sometimes I laugh at myself when I watch a tutorial of yours. :)) Good technique, to relax the good while watching the tutorial. gj

  26. Regarding Videotutorial is good, but the source itself does not consume it 350 500w totalizing voltages and amps but that she substrate that can withstand the power within, that is the only source 350-500w not eat it without having consumatori.Sunt a beneficiary of Chieftec sources and are satisfied with the performance ei.La contact modular plugs have two, namely the source and motherboard, which can happen to oxidize over time so the best solution without the module, do not stay all day staring at the computer to see how the cables look asezate.Protectiile, PCF and others are at the discretion of the manufacturer that implements the technology invented by DELTA old company that used brenduri established.

  27. very useful and we will see a tutorial interesant.Cand says about purchasing a UPS? wait for response as the three-second message is that we give-ups about ul.Numai good guys!

  28. costel08_78 said

    very interesting and very useful this tutorial really makes me think of making a pc from components and it helped me a lot with this tutorial. I would still have a request if you could make a tutorial with the assembly of the components (assembly). I say, I want to make a PC myself but… I still think it's hard if I've never done it before. I have a laptop I have no idea about desktop components. Thanks for the tutorials made

  29. I want to be vali hi please if possible to make a videotutorial with KeyLemon

  30. hello, there were problems with the site? for an hour I could not enter the site, nor any work with Internet Explorer, dc nus? I have a request to you .. is a tutorial on the site on youtube, but I care about how you can become a youtube partner? and account settings .. etc. .. all you can know. if there are other users interested in the subject?! fratilorr say .. maybe guys do a tutorial. Thank you.

    • sklipy: Hey, there were problems with the site? for an hour I could not enter the site, nor any work with Internet Explorer, dc nus? I have a request to you .. is a tutorial on the site on youtube, but I care about how you can become a youtube partner? and account settings .. etc. .. all you can know. if there are other users interested in the subject?! fratilorr say .. maybe guys do a tutorial. Thank you.  Cite me

      sklipy: Hey, there were problems with the site? for an hour I could not enter the site, nor any work with Internet Explorer, dc nus? I have a request to you .. is a tutorial on the site on youtube, but I care about how you can become a youtube partner? and account settings .. etc. .. all you can know. if there are other users interested in the subject?! fratilorr say .. maybe guys do a tutorial. Thank you.  Cite me

      understand that you have an account you Touba, simply a little English, courage-but nothing you will not succeed by trying and hurt all at once. good luck
      write on google., and you will find

    • AdrianGudus said

      sklipy: Hey, there were problems with the site? for an hour I could not enter the site, nor any work with Internet Explorer, dc nus? have a request to you .. is a tutorial on the site on youtube, but I care about how you can become a youtube partner? and account settings .. etc. .. all you can know. if there are other users interested in the subject?! fratilorr say .. maybe guys do a tutorial. Thank you.  

      The opportunity to become a YouTube Partner is not granted to all countries. We are "lucky" to be among the countries for which this opportunity is not granted. Anyway, even if we were, the conditions are high, at least 10000 subscribers as far as I knew plus many others….

  31. back to the question? I'm sorry if double post. Is there a problem with the site? I talked to some friends and I can not access videotutorial, and I'm just still struggling with the work, Internet Explorer, Mozilla, Safari really. I tried required a lot of issues and it gives me error? Does anyone know dc? the time since I posted ultimu 16 comnetariu I could not enter the site.

  32. why my comment was not published

  33. that source that you talk to a tutorial I 2 months and successfully done without the system that I have is about the last generation 3000 euro note I gave him ten tutorial dace may wish to make a tutorial on how to choose processors and motherboards and video cards thanks

  34. Even I was thinking to buy a new source because this that I feel like are "result". Do not know what to buy, but after seeing this guide, I decided (ENERMAX). Although it is a tad bit expensive, I try to buy as soon as

    • Kosler: Even I was thinking to buy a new source because this that I feel like are "result". Do not know what to buy, but after seeing this guide, I decided (ENERMAX). Although it is a tad bit expensive, I try to buy as soon as  

      You can try Enermax MODU87 or PRO87, some sources also super strong: Season Series X: X-560, X-660, X-760, they have a top-quality construction, the fan does not start until after [the load over 20% when the fan starts is hardly sounds like a super Sanyo DENKY only cost a fan $ 20 this means dick.
      The Seasonic lines are even nailed to load source 120%.
      You give your money to buy the tool.

      • Cristi-admin:
        You can try Enermax MODU87 or PRO87, some sources also super strong: Season Series X: X-560, X-660, X-760, they have a top-quality construction, the fan does not start until after [the load over 20% when the fan starts is hardly sounds like a super Sanyo DENKY only cost a fan $ 20 this means dick.
        The Seasonic lines are even nailed to load source 120%.
        You give your money to buy the tool.  

        Cheaper alternative sources are sources Seasonic X Series AX series from Corsair.

  35. Agree with what you said about the function Cristi Rail Fusion which combines 12V lines taking power from a line and taking it to the other but when it comes to actually know how many amps you have 12V line from a source you can look at what is written in brackets, eg. 41 (so you did the right thing said when referring to the maximum current provided), Meaning power 492W on that or those lines (e).
    That's where it is clearly specified amperage, it occurs more from all sources single rail but if not, see the ocz600sxs series, things get a little complicated by having to do some calculations to find out the real current offered by all those lines together. Here I wanted to "beat" more about this tutorial useful to many of us. I hope I was helpful and quite explicit. 🙂

  36. Cristi bravo best guide I hope to help many
    the conclusion was not long tutorial, was even for short mn
    I like your way of explaining
    2 hours if kept even kept looking at it.
    I liked that phase :)) “smells from a post that the tutorial is paid” =))
    "Guide"
    yes .. all the source providers were looking for you especially to make a guide
    for the people)) =))
    I don't understand what some individuals have in their heads…
    instead to say thanks for the guide, or to say anything stupid infara a
    they like to comment like in kindergarten…
    addition to this I do not like to see him nervous adrian explaining that the children
    success so much more guides like this crsti
    Daka can do a guide says about LGA 1155 would be ok
    Good luck

  37. tutorial is well done but you have points that would interest those who look and price. Okay I want to give a total of £ 1500 normal system I will not give or 200 400 500 lei or only source. You showed that sources are good but the quality as good as the quality / price less.
    You could do the following for a system between 1000-1500 lei this source is the best in terms of quality / price between 1500-2000 this source is the best between 2000-2500… etc.
    Honestly sources you have presented seem a little expensive. I know that I speak for the quality of cost but renteaza sources that most of those that are not good quality.

  38. I find it great prices at the tutorial, and I will say something good friend who has loat source 450w the price lions 50 2 years and likes to play and play fifa 08 2-3 many hours almost cation day and going well, it's true that her little noisy but it works.

  39. I want to answer user GABY: I asked what is one thing about you is something else! do not know English? and even if I know it's a problem? I prayed and I proposed a related tutorial youtube delivery dates / partners. I searched before I inquired and were some things that I have overcome. There's no shame in that, just why I asked sbubiectu users who are interested in that I intend to vote for a tutorial. but there is no need for the Adrian / ADMIN answered my questions and I thank this way. so I had to say thanks.

  40. Congratulations guide 10's note. I'm curious of how to connect the cables in the slots. How can we tell if they enter the correct cables in the slots? I heard that it is possible to err in connecting cables in the slots. It can damage the components if connected the wrong wires, especially those with multi-pin linear form? How to find out what's the point of connecting them? Thank you.

    • AdrianGudus said

      Roxana: Congratulations to guide 10's note. I'm curious of how to connect the cables in the slots. How can we tell if they enter the correct cables in the slots? I heard that it is possible to err in connecting cables in the slots. It can damage the components if connected the wrong wires, especially those with multi-pin linear form? How to find out what's the point of connecting them? Thank you.  

      You can't go wrong, you heard wrong, who told you or the one from whom you heard this thing, I think he was a "great master" of the PC. The connectors both at the end of the cables coming out of the source and those on the components have some bevels, others some mules, clips and all sorts of clues, have a single connection position and if you put the wrong connector in the component you will notice or you will realize that you connected incorrectly because the "plug" will not enter, it's like the puzzle, only one piece (only in one position will enter connector in connector) fits.

  41. Thank you Adrian.

  42. I'm a comp nam nimik performed p1 Intel dual ddr 4 3000 g rami 2mhz and a video card 256 must for me mes net music nimik special games do not give me the source that made Chesty thoughts as mine is about time killed and figures about making many more stynge pc longer a restart da nam imported so far given the source sam should take?

    • AdrianGudus said

      kosty: I'm a comp nam nimik performed dualddr 1 Intel p4 3000mhz and a video card 2 g rami thousand mes 256 need for net music nimik special games do not give me the source that made Chesty thoughts as mine is about time killed and figures about making many more stynge pc longer a restart da nam imported so far given the source sam should take?  

      If you read the text above tutorial to see you and some recommendations of sources (written in red, simply click on the words in red) and link to them.

    • kosty: I'm a comp nam nimik performed dualddr 1 Intel p4 3000mhz and a video card 2 g rami thousand mes 256 need for net music nimik special games do not give me the source that made Chesty thoughts as mine is about time killed and figures about making many more stynge pc longer a restart da nam imported so far given the source sam should take?  

      it is very nice that you take after take after the tutorial that if you get to give him a few hundred lei in this prostie.Sursa http://www.pcgarage.ro/surse/sirtec/hpc-400-h12s/ is perfect for you and report sitemului catilate / price is mare.Dupa as possible and they can see the site is a very popular source.

  43. Can you recommend a source about the lions by 350 lead a NVIDIA gts450 a quad core AMD Athlon 640 a 250 gb hdd and a motherboard like this http://www.emag.ro/placi_baza/placa-de-baza-asrock-n68c-s-ucc-socket-am2-am3–pN68C-S-UCC?ref=hdr_cos ? Source that http://www.emag.ro/surse/sursa-corsair-cmpsu-600cx-600w-atx22–pCMPSU-600CX?ref=vp_ap_assoc Is it good? I saw a comment that no one took them x3 unlocked processor and Radeon x4 5870
    Thank you in advance.

  44. Why no longer mentions anything about sources fanless passive cooling? True they were perfect expensive, but that does not mean they no longer talk about (cost between Roni 400 600 and five six years).

  45. Thanks for the answer. I was having a lot of problems because I heard everywhere that the power that the producers say is not the real one and so on…

  46. Servus, nice tutorial ... very useful. I have a source trumpet that theoretically charges about 650W. It started to make an infernal noise after a week, I greased the camp ... the idiot. I don't have a very new processing, but the video card heats up a bit ... it's 512 Mb. it can be seen when the pope, the whole source and the plate are heated, it is over-requested. Congratulations again for this tutorial, it's a very useful guide, listen to what Cristi says, don't skimp, I fixed some bad sources .. it breaks again and again…

  47. Hello good as some say totorialu all doing this for advertisement even if so after all everyone has something to live although I do not think doing this for advertisements should rather thank you for doing this free e and that hard work and we have and what we learn not to fool some others that you are buying the correct even

  48. Lucian Gabriel said

    Good tutorialul.Chiar you like to enlighten man:) (a very good thing but increasingly rare today)

  49. Hello
    I want to ask some advice.
    about PC configuration
    I have an Intel celron 440 2.0 GHz. soket 775
    a ddr2 gb ram ...
    recently a friend and has taken another pc and the other pc sells component
    and said that the video card gives me so moka.
    num is 9600 nvidia gt is a good video card.
    and I want to put on configuration.
    1 want to know how well my video card will work with my processor.
    2 have a "source pan"
    even 50 lei (because the old one was burned source) and I terribly
    on this from Flanco with fixed 60 lei.
    say out 450w
    whatever.
    spunetimi how well I will go system
    intel celeron cpu 440
    ram 1gb
    nvidia gpu 9600gt
    psu (I do not know the risk I have to take another) so currently
    I have no money by the process must invest intro source
    zicetimi a lead source system. )
    and basically want to know how well they understand the video card
    processor

    • AdrianGudus said

      Mihai: Hello
      I want to ask some advice.
      about PC configuration
      I have an Intel celron 440 2.0 775 ghz.soket
      a ddr2 gb ram ...
      recently a friend and has taken another pc and the other pc sell on Componentes said that the video card gives me so moka.
      num is 9600 nvidia gt is a good video card.
      and I want to put on configuration.
      1 want to know how well my video card will work with my processor.
      2 have a "source pan"
      even 50 lei (because the old one was burned source) and I terribly
      on this from Flanco with fixed 60 lei.
      say out 450w
      whatever.
      spunetimi how well I will go system
      intel celeron cpu 440
      ram 1gb
      nvidia gpu 9600gt
      psu (I do not know the risk I have to take another) so currently
      I have no money by the process must invest intro source
      zicetimi a lead source system. )
      and basically want to know how well they understand the video card
      processor  

      Your processor is a little dust if you get that one right. Surely you will pull down 9600 video card. The rest are details. The source, just what this tutorial taught you how to choose your source! Head-tail look nice on tutorial without rewind (I'm sure you looked scrolling) and do what you said in tutorial.

      • AdrianGudus:
        Your processor is a little dust if you get that one right. Surely you will pull down 9600 video card. The rest are details. The source, just what this tutorial taught you how to choose your source! Head-tail look nice on tutorial without rewind (I'm sure you looked scrolling) and do what you said in tutorial.  
        I watched the tutorial I didn't run,
        vizites videotutorial site of 2 years and watch every tutorial without running.
        but in the tutorial are expensive dc sources to give a source 3 million
        ? better give 3 million on a more powerful processor…
        but it can be a source to 180 lions? 85% efficiency with Active PFC
        ?

        • AdrianGudus said

          Mihai:
            

          Well, do a simple calculation, you have a "beauty" processor, all the components are lightning, but the source leaves something to be desired because you, in yourself, consider it less important when in fact it is the most important. Like the heart for a man, so is the source for the PC. A well managed current and without amperage fluctuations, lead to a longer life of the "organs" (components)
          If the source is dust, you will change processors, video cards, RAMs and video cards quite often, why? Because the heart (source) is not able to "irrigate" enough and properly vital organs (components)
          So you won? You know bad source leads to swelling capacitors on the motherboard and more rapid wear of the components?

          • AdrianGudus: Well do a simple calculation of a processor "bellicose" all components are lightening but lacking source for you, in your self a less important when it's actually the most important. Like a human heart, so is the source for PC. A well managed and no current amperage fluctuations, leading to a higher life "bodies" (components) If source is dust, I change CPUs, video cards, RAM and video card pretty often, why? Because the heart (source) is not able to "irrigate" enough and how vital organs (components) So you won? You know bad source leads to swelling capacitors on the motherboard and more rapid wear of the components?  Cite me

            I am the source of the 2003 and is made with the case, so it's bad trumpet. Glad it says 400W and makes a helicopter. But the point is that there were unflat capacitors and components were not burned because of it.
            The tutorial is very useful, but it is taken to "professional" products, and less for the average user. I wouldn't give 500-600 lei for a source and then give the same for the rest of the components… I can't afford it.
            However when the tutorial author, whom I thank, changes source it has now, I want to take it, that if he wants to make someone happy.

  50. @ Cristi Very good tutorial. Although sources that I know I still learned some new things.
    PS you often refer to some things / companies and say other things / companies. For example, you present Enermax and Corsair "came out" on your mouth. At first I was confused, until I realized that I do not have to "take" you seriously (involuntary humor). keep up the good work

  51. hello world
    spunetimi to me to know which cases are good for OCZ Source 700 W

    1. carcasses sources SUS
    2. carcasses sources JOS

  52. Hi I have a source of 400 Powerlink W and a video card HIS Radeon HD 5450 and honestly I have no problem. By the way I bought a video card from FAME.

  53. Hi guys! I'd also like a recommendation for a system? I want a good source, but not very expensive, because it's a medium and do not want to give money to a crazy expensive source that does not use them to full capacity!
    The system is as follows:
    - processor: Core 2 Duo E8400
    - video: gigabyte-nvidia-geforce-gtx260-oc-896mb-ddr3-448bit
    - motherboard: asus-p5q3
    - 4 giga ram (2 ddr3 modules)
    - hdd 1 tb 7200
    - dvd-rw

    • DragosHi guys! I'd also like a recommendation for a system? I want a good source, but not very expensive, because it's a medium and do not want to give money to a crazy expensive source that does not use them to full capacity!
      The system is as follows:
      - processor: Core 2 Duo E8400
      - video: gigabyte-nvidia-geforce-gtx260-oc-896mb-ddr3-448bit
      - motherboard: asus-p5q3
      - 4 giga ram (2 ddr3 modules)
      - hdd 1 tb 7200
      - dvd-rw  

      It's very simple DragosIf you looked closely at the tutorial you definitely noticed clear to commemorated how can we calculate the our system by computer on that site. That would be one thing. The second, which is also my recommendationWould be that after you get the total power in watts to add another 100 to the power to be as safe and to be the final addition to power and not equal.
      I mean, if you get eg. 400W I recommend you take a source of at least 500W.
      Why do I say this because any computer that is not perfect and it's better to go with a source that is not used because the total capacity would become hot and could shorten life and become louder, to Not to say that in this way would greatly decrease the yield and this means higher consumption power outlet. The same thing happens when we overclocking; need the current increases.

      • Robert: It's very simple DragosIf you looked closely at the tutorial you definitely noticed clear to commemorated how can we calculate the our system by computer on that site. That would be one thing. The second, which is also my recommendationWould be that after you get the total power in watts to add another 100 to the power to be as safe and to be the final addition to power and egal.Adica not, if you get eg. 400W I recommend you take a source of at least 500W.De I say this because any computer that is not perfect and it's good to go to a source that is not used to full capacity because it would heat up and would shorten life and become louder, not to say that this way would yield much lower and this means higher power consumption from the mains. The same thing happens when we overclock, need current increases.   Cite me

        Robert Mc response! The computer gave me a little 330 W. It is best to go on a source 500 W.

  54. Hi Cristi, interesting tutorial (guide) about the noise from the source some time ago I had a frying pan. taken from a store in Pitesti about 50Ron and I had a problem with it… I was happy at that time it was one of about 500 W all good, I mount it in pc I let it go, I play on it (test) it goes pc about 30 -35 minutes and I hear a loud bang, what should it be? :))) the source exploded (the circuits in it) I thought it burned my pc components… at about 5-6 months I bought a source, the seller of the respective store recommended me a “ChiefTec GPS-550AB-A” I am extremely satisfied with it, it doesn't make any noise at all, it can be heard I think that a quarter of what a pan was heard at 50-60 Ron, the pc works well… otherwise, keep it up… good bye

  55. Hello World

    2 time to ask anyone knows or knows only

    Spunetimi to me that you know are good for the carcasses.,
    SOURCES OCZ 700 W
    http://www.emag.ro/surse/sursa-ocz-modxstream-pro-700w–pOCZ700MXSP

    1. enclosures with SUS sources
    2. carcasses DOWN sources

  56. If you say it's not supposed to put links artcol paid by the manufacturer or not, but this should not be a cause for sadness paid articles are everywhere and no one would expect you to admit that it's now
    I think it's normal to take advantage of the traffic you have, submit a job and be rewarded in this way can not only live in applause.

  57. Hello World

    3 time to ask anyone knows or knows only

    Spunetimi to me that you know are good for the carcasses.,
    SOURCES OCZ 700 W
    http://www.dc-shop.ro/Sursa-OCZ-ModXStream-Pro-700W-OCZ700MXSP-prod-17614.htm

    1. enclosures with SUS sources
    2. carcasses DOWN sources

  58. nynymarian said

    CONGRATULATIONS guys are the hottest! VIDEOTUTORIAL THIS VERY GOOD!

    I AM A STUDENT IN PC FOR THE SOON AND I HAVE LEARNED A LOT OF "THINGS" FROM THIS SITE !!

    • nynymarian: Congratulations guys are the hottest! VIDEOTUTORIAL THIS VERY GOOD! YET IN I AM STUDENT OF PC and I learned a lot "stuff" ON this site!  Cite me

      for now you are a student and in writing correctly the word "sait", without upsets! do you write as it is pronounced? 🙂

  59. most of the commercial people who have posted here have serious problems with grammar novels! really be a coincidence or are invaded :))

  60. crysty, without upset, but you are a little too knowledgeable. In Romanian the term "sait" is also accepted. Be interested and you will see.

  61. is a video tutorial that explains how to install windos on your pc and where to buy it '… thanks: d

    • AdrianGudus said

      Denys: Is a videotutorial explaining how to install WIND pepc and where to acquire it '... thanks: d  

      Yes, there are tutorials on how to install Windows, you write up in the search box to the right of the black border:
      Windows XP installation sp3
      or
      windows vista installation and optimization
      you enter and you will find tutorials. WinXP you purchased from any computer store is a commercial operating system. If you want free operating system for which you need a license, using Ubuntu Linux. You have a lot of video tutorials about this operating system here on the site.

  62. the photos (advantages) of the ids no longer appear on the messenger, at more than half of the list, sometimes I don't even see my own photo…?

    • AdrianGudus said

      Denys: The messenger not occur photos (avantarurile) Deida-hatred, less than half the list, or to me uneorii not show own photo ...?  

      Posting the same comment 30 times at different tutorials, than do not get bored and draw from our ignorance! Learn to be patient and acknowledges that no stay to guard the 24 24 site to answer you in your comments. Because you do not know how to wait your turn, I will not answer your question, and if you do not quench the posting random comments and totally wrong / off-topic theme tutorial that post, you will not have the opportunity to post comments on this site.

  63. Computer noise bothered me since the first day I bought it. I wanted the frequent occasions to exchange grinder (we'll say "pans" or "meatballs"
    The problem is different: the quietness of the source highlighted the high level of noise produced by the processor cooler - which makes me think that I only did half the work and that I still have to change something through the case of my computer to have a system as a little noisy. Speaking of the case, in the last tutorial (the one with the 1000 RON system) you mentioned “silent” and even “soundproof” cases - a fact that drew my attention to its importance for the computer.
    So I decided to write in order to achieve two tutorials and suggest topics such as:
    1. How to choose the cover (a small tutorial for 5-10 minutes)
    2. Configuring a desktop as silent (although quietness that because a system is very important, it is ignored by most of those who had bought a new computer).
    That's all…
    Look hopeful these two new tutorials but if they will not be made again, I still thank you for the job that you have done so far and I can only hope to keep so.

    All the best!
    Novac

  64. If you are very stressful, I understand this thing, but I didn't know how to comment on the video tutorial of that question .. ps

  65. Hello
    I bought an Antec HCG source 900 Watts and want to ask some advice if ok with the following configuration:
    MSI P67A-GD65-B3 socket 1155
    Intel CoreTM i7-2600K SandyBridge 3400MHz
    Video Card EVGA nVidia GeForce GTX 580 1536MB
    Corsair Ram 8GB
    Kingston Solid State Drive V100 64GB
    I took it to Snape actually the source of the EMAG told me to go on Antec otherwise I think I made a good choice.
    system since I did not have to end up buying something so I would not know what can source.
    or what advice is welcome thanks

  66. Hello
    I bought an Antec HCG source 900 Watts and want to ask some advice if ok with the following configuration:
    MSI P67A-GD65-B3 socket 1155
    Intel CoreTM i7-2600K SandyBridge 3400MHz
    Video Card EVGA nVidia GeForce GTX 580 1536MB
    Corsair Ram 8GB
    Kingston Solid State Drive V100 64GB
    I took it to Snape actually the source of the EMAG told me to go the Antec.
    system since I did not have to end up buying something so I would not know what can source.

    http://www.antec.com/Believe_it/product.php?id=MjQyNw==

    or what advice is welcome thanks

  67. Constantin Dobre said

    Hi, first of all I want to congratulate the tutorial, it is good to very good. Secondly, I want to say that many people "throw themselves" if I can say so to some sources that MUST necessarily cost a lot, because they consider that if you give fff a lot of money on a source, then it will be guaranteed to be good. At my company, I put some KME sources on PCs, here is the link to the source http://www.smartbuy.ro/surse-pc/kme-pw500epe~769073.html I have not given than 60 lei. Differ 300W and 500W (I took the 500w) and can say that I have no problem, works perfectly. The best decisions in life in my opinion are the ones you make yourself. Thanks nice. Sincerely Dobre C

  68. Hello Cristi.Vreau to make my new computer and I chose for him a source that can lead corsair cx600.Crezi MSI ATI Radeon video card and an Intel Core 5850 5 I2400

  69. cristi026 said

    source guncrie a choice of how many RAMI, video card, CPU
    to know that lead 600 8 RAMI + Gb Gb Video on 1 256 Biti and 3 processor Gb
    if not so someone correct me

  70. Remain I want to buy her are Kingston 7 latency; 4 gb (2x2gb) 1333mhz.
    I would need a power stronger than that of 600w with-conducted 80 +?

  71. aaa and I forgot to say is Twin Frozr II Video Card

  72. cristi026 said

    source you choose depending on how many you RAMI video card (how many Gbcu or without CPU) Processor
    to know that lead 600 8 w RAMI + Gb Gb Video on 1 256 bits, and processor 3 Gb
    if not so someone correct me

  73. Thanks for parere.sa's hope so for this week I take that system.

  74. I bought the system and it all goes ok deocamdata.Urmeaza to stress and put them some more demanding games to see how it behaves.

  75. Active PFC false :))

    Active PFC output voltage stability helps when The network fluctuates.

    The network decreases if you 180 V in "secondary" will have all 12 V 5V, 3.3V, etc ... and 10V, 3V, 1.5V,.

  76. scorpion88 said

    I cristi sal of mu nsirtec of 400 watts and took them ncurind a video card ATI Radeon HD 6850 and it keeps me yet but I have a larger one I 6850 hd ugtx I wanted to take my 460 but I heard that my source does not you that gtx 460

  77. Catalin82 said

    Hi Cristi, you've got to follow the much lauded Enermax?
    I took Voria of 800w, too big the law, but are very happy with it. We want to know what you got till you follow, and why.

  78. scorpion100 said

    I cristi sal mountains of the 400 sirtec watts and the mo video card from ATI Radeon hd6850 source heats up a bit and I do not know udaca is good or need to change what we have to do x2 of 6 2.8 phenom GHz HDD The 1 tb. motherboard from Gigabyte GA-ma74gm-s2 dual channel RAM 2gb

  79. scorpion100 said

    sal cristi source gs600 corsair are good

  80. Cristi good!

    I'd like to ask you if you can do a guide for UPS. And peripherals in general. I saw that your guides have great success.

    Thanks!

  81. Ionut Grigore said

    Hi cristi, what can I say about the tutorial ?, extremely successful, especially since my heart was talking about enermax (in my opinion it is one of the best), for example I want to set up a new monster "In the future (maybe we could see you in more detail when you can) and I want to have the best of the best. For now I have a source from silverstone, I honestly understand that they are among the very good ones, for some time now, I haven't been informed much (with the session at the college, it's harder) and I would like to know what you think about my 850 W silverstone, and of course it's modular. Let's get along well

  82. PALL ALEXANDER said

    IF SOMETHING IS IN MY COMPUTER TELEVISION same outlet, the DVD, the monitor, modem, IMPRIMINTA, fridge, cassette THERE COMPUTER is unstable because of this they are all next to each other and the computer is next door and in front of the fireplace and GLASS IS MY NETWORK CURRENT foate old as you turn a fridge and fridge lowers blood to the bulb and the computer and the source is integrated into the housing and AM MB THANK 512 video card if someone has the patience to read my question and answer me

  83. You said you system for financially afford expensive ones.
    I have to change the graphics card, and buy this -> PCI-E with 1 Gb / 128 bits. I have the system: SROCK P5B-DE SOCKET LGA 775; INTEL DUAL CORE E6600 3.06 GHZ; KINGMAX 3GB DDRAM2 (1 + 1 + 2), PALIT GEFORCE 8400 GS PCI-E 512 MB / 64 BITI; LG DVDRW; ATX DELUX 450W. And I'm thinking of replacing the graphics card with the one that has: 1GB / 128bit PCI-E.

    CORE E6600 3.067 GHz

  84. hello I have a Vantec ion2 source of 600W and has two lines on 12 22 volt amperes and voltages on the other two lines are all aces suns 25 amps tell me a review on this source

  85. looks good to me and I almost any 2 years but If I put a better video card now with a gts 250 can lead source having now following PC configuration. 4giga x8 ram AMD Phenom ddr3 1600 tv tuner a second sound card DVD-RW drives and a second ssd

  86. Alexandru said

    Please someone who knows how to please tell me if the components are compatible wishlist
    http://www.pcgarage.ro/vizualizare-wishlist/489570/

  87. AdrianGudus said

    Alexandru:
    Please someone who knows how to please tell me if the components are compatible wishlist

    Yes, they are compatible

  88. I do not mean that a more expensive source is more efficient in terms of quality / consumer / zgomot.Dar should not take into account a factor centrale.Oricat good storage unit as the source if your PC is not cleaned every month or even the possibility 3 months depends dust from circuit current increases very much consmul and warmth that would have to exhale / dissipate highly mic.Eu one have a source that I achizitionato 450W with housing, a Ron 50 credible source but it's much quieter than many other good sources.

  89. Welcome. I bought myself a Corsair gs600 source: http://www.emag.ro/sursa-corsair-cp-9020012-600w-atx2-3-cp-9020012-gs600/pd/E73TKBBBM/.
    The source is stable in voltages, it does its job well, only I have a possible problem with it: the fan does not work. only when I start the pc it spins for 3, 4 seconds and stops completely. I read on the net that the fan works depending on the temperature. The source is warm, it feels like it's working but the fan is nothing… I also played a game (nfs shift 2) so try to see if the fan takes it in vain.
    PC configuration (if it matters): intel core 2 duo 3000 GHz - E6850
    4 G ram ddr3, 1 hdd 250 sata, video card: ATI RX3870-T2D512E-OC - 512 MB, 256 bits.
    If anyone knows of this problem and give me your answer.

  90. Can you help me find my proper source for PC, Asus M5A78L-M/USB3, AM3 + socket,
    AMD Athlon II X3 460, 3400MHz Socket AM3, Box,,
    Gainward GeForce GT630, 1024MB, GDDR5, 128bit, HDMI, DVI, PCI-E
    nice please I'm not the source Price, if possible?
    Thanks !!

  91. Basem: Can you help me find my proper source for PC, Asus M5A78L-M/USB3, AM3 + socket, AMD Athlon II X3 460, 3400MHz Socket AM3, Boxing, Gainward GeForce GT630, 1024MB, GDDR5, 128bit, HDMI, DVI, PCI-Ete me kindly for not PRICE sources, if possible? Thank you!

    Here's the links if you want to help me http://www.emag.ro/placa-de-baza-asus-socket-am3-m5a78l-m-usb3/pd/E6NCDBBBM/
    http://www.emag.ro/procesor-amd-athlon-ii-x3-460-3400mhz-socket-am3-box-adx460wfgmbox/pd/EWV7DBBBM/
    http://www.emag.ro/placa-video-gainward-nvidia-geforce-gt630-1024mb-gddr5-128bit-hdmi-dvi-pci-e-426018336-2593/pd/EDVBKBBBM/

  92. I would like an opinion about the sources below with power of 520 and 550. The processor is an "i7".
    http://www.seasonicusa.com/G-series-450-550-650.htm
    http://www.seasonicusa.com/S12II-Bronze.htm
    http://www.seasonicusa.com/M12II-Bronze.htm

  93. I want to buy a PC for gaming but do not know k option to go: Intel Core or AMD i5 3550 fx8350 and k source do you recommend, I bought ATI Radeon HD7950-3gb ddr5 and wd hdd 1tb

  94. which one would be best for gaming: Intel- http://postimage.org/image/o3g7mzq17/
    AMD http://postimage.org/image/tygxgiunr/

  95. Thank you very very much today Cristi also learned why my pc keeps dying when I play on it when I watch a movie and when I download something even learned how do I choose a good source thanks a lot!

  96. I had a problem with the source computer was too weak, I changed it, now that I connected the computer to the current after a while the fans start to work alone, and the computer can not be started. I disconnected the fan as the source, but the processor fan starts all alone. What is the cause and if there are likely to be corrupted CEV component in your computer?

  97. Cristian said

    Very good tutorial, and yes I can say kiss your hand for free lessons, I know something you do not get the videotutorial.ro DPO and all is clear, thanks again.

  98. Hello, I took some time Cristi source URANO SX500w, NVIDIA GeForce 7600gs 2GB RAM Intel Pentium Dual Core GHz 1.80 250 out DDR3 GB HDD
    Cooler INTEL E18764-source 001 me that old games are not going very well with nothing jerky
    I changed the source and started as guinea pigs 10 minutes after I walked in Counter-Strike PC 1.6 stall
    We need to give restart, today I grabbed him aam got out, plaaca basic and looked at thermal compound apparently looks ok but I did want to paste down tomorrow I'm going to buy pasta quality cnductoare to me Tina does not change every two months

    Question: I have changed something in the BIOS? Thank you!

  99. RaduHi, I took some time Cristi source URANO SX500w, NVIDIA GeForce 7600gs 2GB RAM Intel Pentium Dual Core GHz 1.80 250 out DDR3 GB HDD Cooler INTEL E18764-source 001 me that old games are not going very well jerky nothing I changed the source and started as guinea pigs after 10 min we get into Counter-Strike PC 1.6 block had to give it restart, today I grabbed him aam got out, plaaca basic and I looked at apparent thermal compound paste looks ok but I did want to go down tomorrow to buy quality cnductoare paste to keep me not to change it every two months

    Question: I have changed something in the BIOS? Thank you!

    Restart usually occurs when a component of the system is overloaded, too hot, not enough energy. Thence restart can come from a handicapped driver, accompanied by a blue screen.
    It's hard for me to help you because there are many variables in acrst case.
    Most often reinstall your operating system and drivers solve the problem, unless you have alinentare and cooling deficiencies.
    Locking system comes from system RAM or a hard drive failure.

  100. the system is my ASRock h 55 processor i3,4gb ram.hard of 500gb, 275 GTX video card, the power source 650w silence and I would also like to know what my source if it is not good general guidelines recommended someone a thousand Corsair 450w what you think

  101. Hey, it fits any source to a normal pc?

  102. Which of these sources do you think is better?

    Sirtec EP-700 BR, 700W, 2.3 ATX, Active PFC
    Zalman ZM700-GLX, 700W

  103. Yours sincerely, I recently bought some components (MSI 970-G43, AMD FX4350 Kingston Genesis 4GB 1866, 7200 Rpm HDD, nVidia GT630) and I intend to buy this source ( http://www.emag.ro/sursa-corsair-350w-atx2-31-cp-9020052/pd/EZNMNBBBM/ ).
    The question is: can the source computer goes smoothly?
    Thank you very much

  104. miam recently got a source for PC and is called
    (Source Super Flower Atlas AT-580R14A, 580W, 2.32 ATX, Active PFC) 240 lei.vreau I gave myself an honest opinion about ea.ptr I saw that not one of the best brands for sources .mutulesc

  105. Sal, I bought myself a: AMD FX X6 6350, 3900MHz, 14MB Socket AM3 + Box, an Asus motherboard M5A99X-EVO R2.0 Socket AM3 + 4Gb DDR3, a hard 1 TB SSHD, a video card Asus AMD Radeon R9 DirectCU II OC 270X, 2048MB, GDDR5, 256bit, HDMI, 2x DVI, Display Port, + a housing Versa II Thermaltake ATX Mid Tower, No source, Black (7 coolers).
    What source can advise me!
    Or if the system brings me this source…: Thermaltake Smart SE 630W source.
    Thank you! A good day!

  106. Hello. Please help me and me with some advice. I took a poor source, I fried it. Today I got one but unfortunately I'm worse that the other although I gave 200 lei on it. Turns PC and sacadeaza difficult and occasionally. For an AMD FX Processor X6 6300, 3500MHz, AMD Radeon Video Card Asus DirectCU II OC R7 260X, 2048MB, GDDR5, 128bit, HDMI, 2x DVI, Display Port ,, ASRock 970 EXTREME4. On the video card box tells me I need an output of over 12 25v amps. This source does not. The store told me it's good though not those amps. What do you think?

  107. Hello ,
    Processor AMD Athlon II Dual Core X2 370K, 4200MHz, 1MB, FM2 socket, MSI FM2-A55M-E33, FM2 socket, Kingmax Memory 4GB, DDR3, 1333MHz, PC10600, HDD WD AV-GP 1TB, 64MB, SATA 3 .
    My question is: what is the best source for the system configuration?

  108. Hello.
    CPU: AMD FX-8120 (-octacos 3100mhz) PB: Asus M5A78L / USB3, Memory: DDR3 2x4gb, Video Card: Sapphire AMD Radeon R9 280X OC TRI-X, 3072MB, GDDR5, 384bit, storage: 1xSSD 120gb, 3xhdd 1TB + dvd -rw, Thermaltake Source TR2 RX, 550W.
    I want to exchange heat source because often very strong smell of burning. I suppose it's low on watts.
    What I recommend between 300 source and 400lei?
    How many watts amp 12v should have the power to lead the system without problem?

  109. Nicolas said
  110. Hello I am a cool source 550w master of bronze and prolema 80 plus is that it is worth a warranty repair or have another source to give me what source do you recommend as a lifetime longer than the warranty

  111. Hello, I would like to know if there are other protections or if it is enough?… 1, scp, 2.ovp, 3.ocp, opp, uvp… thank you

Trackbacks

  1. […] This post was mentioned on Twitter by Ady, VIDEOTUTORIAL.RO. VIDEOTUTORIAL.RO said: Buyer's guide, how to choose the source for the computer Videotutorial.ro http://t.co/HIqwH6m [...]

  2. […] If you opt for a high-performance video card (over 500 lei) you have to consider changing the source and the case, the case is too small for high-performance cards. Motherboard is part of […]

  3. […] Does more than "consume 450W from the grid". Some time ago I talked to you in a hardware guide about buying a source, I said in detail what we need to pay attention to, how to choose the source, we even did a few […]

Speak Your Mind

*