Hi friends, in this video tutorial will begin a series of tutorials that will show you the steps you need to follow for setting up a video surveillance system audio.
This tutorial is the first in this series and is dedicated room or IP cameras, you will learn to configure the camera and I'll explain all settings.
The great advantage of a surveillance system based on IP cameras is the scalability and flexibility we create a surveillance system from multiple cameras at different locations, these cameras can monitor them from one place, can also store records of all rooms ln one location or multiple locations, even if they are located tens of kilometers apart.
Example:
We set up a surveillance system that is composed of 10 IP cameras, two in Constanta, Brasov and three to five rooms in Paris. All these rooms we can supervise in Bucharest and records can be stored in Iasi, cool huh?
The camera presented in the tutorial is a TP-Link TL-SC3430, this camera is very good but it is only for the interior, if we want a camera for the exterior we have to go to another model. TL-SC3430 has a very good sensor, it has high sensitivity to light and a maximum resolution of 1280 × 800, which means 1,3 megapixels, while most cameras have a resolution of 640 × 480 ie 0,3 megapixels. An interesting feature is the 3GPP support for mobile phones, so we can watch the camera live on the mobile phone via 3G network, I tried and it works without problems even on EDGE (Orange, Cosmonte).
The setting of the IP camera must be done in parallel with the setting of the router, it needs small "treatments" for this surveillance camera to work flawlessly (port forwarding, DDNS where appropriate, UPnP activation).
System configuration starts with setting the IP camera but does not end with this, will follow the system configuration that will store records, that we will see how to do a tutorial future, that if you made a request that the comments box, e much to talk about storage and I need your patience for that.
Careful:
The tutorial takes about an hour, empower yourself with patience and you will be rewarded with information.
The camera was purchased from Pc GarageIf only to buy this camera you can use this coupon code:
88NX2AZW
And find Emag surveillance camerasUnfortunately this model is not in demand at emag find other cameras that I can not say anything because I have not tried.
.................................... ..
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 700 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.
Instructions for use videotutorial.ro
Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.
Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.
Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !
by Cristian Cismaru
About Cristian Cismaru
and I'd like a tutorial if possible with a spy camera directly connected to the PC via USB and does not have any one thing Addicted
Below the video tutorial are "Similar Articles", if you look in that list you will find what you are looking for.
Hello. You can help me set up an 221 model camera
thank you in advance
very good tutorial, bravo guys. if you can make a tutorial about much larger rooms and for the outside… also by connecting to the net… and another on how to replace that electronic part from a hard drive and where we can find them to buy on what site.thank you
Even tutorial came time for me. Waiting on this because we want to make our system of surveillance parking block, also composed of 3 camere.Ca not have problems we would like to assemble at a friend's house rooms in the ground floor.
HEALTH Christ!
Treat your neck with pepper plum brandy!
Or a teaspoon of honey every morning.
Variant you choose.
If successful this tutorial to do it and that the recording console, it's super hard, you will like most certainly.
Thanks for the advice, I think I'll drink a cup of brandy before the tutorial, to have courage.
Honey take and now I have a combination of honey and underbrush. Catina contains plenty of vitamin C.
His tutorials on doing it are very good
Congratulations!!!!!!
Hello Crristi.De yesterday mouseul.Merge not just go up and down but the right and the left than tot.Am and walked through nimica.Daca settings but can you help me thank you wholeheartedly.
I am also interested in an outdoor surveillance system with PTZ cameras (dome) with internet connection. I am at the first comment but I want to say I learned a lot from video tutorials; SIX BIG CHRIST… .. THANK YOU
Wow, and just like that you no longer give money to those who install surveillance cameras. He came to fix this tuttorial. Il look more interest on the recording console.
success
You can continuo
I wonder if I put a net cable directly in this room, how do I set it? or must it be set in advance via the internal network?
Mac address of the camera can change? in my case provideru dhcp ip addresses allocated by poppy must be one that has made the contract.
AS A GENERAL RULE:
ANY diposzitiv TCP / IP - in this case the IP camera - can be set-ata and without a router, if you use a cross-over cable so that one end of the cable inserts into the hole Ethernet IP camera and other in network card to a computer, then set your computer's IP-Yorkers with another IP than the room. Then, enter the IP address of the camera in an Internet browser and - VOILA - so you can enter it in the menu configuration IP camera!
A camera so set-floss - via a cross-over cable - can be connected directly to the Ethernet cable - one example: the Internet from RDS - but with the stipulation that you will not be able to sign anything at that subscription Internet if you have not or do not want to use a router.
AS A GENERAL RULE:
ANY diposzitiv TCP / IP - in this case the IP camera - can be set-ata and without a router, if you use a cross-over cable so that one end of the cable inserts into the hole Ethernet IP camera and other in network card to a computer, then set your computer's IP-Yorkers with another IP than the room. Then, enter the IP address of the camera in an Internet browser and - VOILA - so you can enter it in the menu configuration IP camera!
A camera so set-floss - via a cross-over cable - can be connected directly to the Ethernet cable - one example: the Internet from RDS - but with the stipulation that you will not be able to sign anything at that subscription Internet if you have not or do not want to use a router.
I want tutorials and IP cameras.
very useful these tutorials
Hi Cristi, your tutorial is very interesting, I hope it will be compatible with HG520s, which from romtelecom, will only be with tp-link. in fact they want a WIRELESS network of cameras, because when mounting them with cables they can be uncovered!…
Good luck and more tutorials and last but not least happy holidays!
Any IP camera go with any router, only settlement option in the administration interface will differ, and the router and IP camera depending on the brand and equipment level.
I do not know if at my request you made this tutorial but is welcome. There are many stores that are interested in such a system supraveghiere; I asked this kind of tutorial for my install such a system to secure my house before going abroad. There are many working abroad, began building a house and still have, building materials, unattended. thank you very much for this tutorial and we look forward to the next
Hi I just want to congratulate you all do for us ECAC discovered situ and now I am very happy, but I want to thank and congratulate all who do these tutorials. Thank you
Cristi nice tutorial, I just have some objections to the rooms as a former officer in the field. First I am not a professional solution and compared with a camera connected directly to a DVR have limitations on image quality and their specialization in different environments. DVR solution is used in pro shops, warehouses, hypermarkets etc.
For Internet connections, DVR has ethernet port, with a menu where you can connect to the Internet, either directly or through a router. Advantages compared to those which emit directly relates to storage capacity, scalability, codec h264 use, plus the use of ActiveX-based interfaces for viewing video stream. A tutorial succeeded, and for those who need a home surveillance system easy to install, maintain, but without resorting to specialized staff, it's ideal.
Meanwhile things have changed, take look here.
http://www.youtube.com/watch?v=ChqWds5BkLY
I do not recall any past generation system can so.
This stuff there before. Speed-dome cameras talk, servo motors, with elements in motion that binds to a DVR or capture card installed on a computer system. What I've shown here, Cristi is a much easier thing and very easy to set compared to a room Skip to content Home, which sets a dedicated keyboard with laptop and specialized software, etc.
However, I remain and I think that old-school classic DVR solution is the healthiest. What we adopted in exchange for their installation is UTP cable with transceivers at both ends and the ability to power the camera directly via UTP cable on the wire pair blue-white / blue, if my memory serves me, because it supports up to 12 volts and 10 amps. The same pair of wires is used by companies like RDS, Nextgen, to carry phone signals without the need to stop shooting a dedicated infrastructure for telephone service.
"As a former worker in the field" that you should have known that a scalable system gives IP cameras and analog is not linked to a DVR! Scalable - "in telecommunications and software engineering - the ability of a system or a process network to support a high volume load mmai or allow increase or expansion." (Wikipedia: http://ro.wikipedia.org/wiki/Scalabilitate)
In other words, a DVR, no matter how powerful he may be, you can not attach more rooms than supports Digital Video Recorder, so it is scalable so that does not support expansion, increase in size, number of rooms! You will need to purchase another DVR, with a larger number of rooms! In addition, you have to shoot and CATV cables, these cables work horses attached cameras to DVR!
By comparison, an IP camera system can be increased - the scale, if you want - no change, in this case NVR - and no other cables draw the connection IP cameras on the same network can be structured existing which is designated for connection clauclatoarelor, being mounted with minimum investment, an expansion port switch for IP! On the other hand, IP cameras are more peform in video transmission quality than analog, you're talking about video recording of IP cameras have the advantage that they can be made elsewhere DEAC in the room / s, so No risk of thefts and / or compromising video.
Perhaps when you stopped you work in this area, cameras that you know you were very outdated, moral, which is why your knowledge discourages so much IP cameras, on the other hand, definitely lack experience your IP cameras Hattrick: they prefer them because you never mounted too (or you have not installed at all) IP cameras, only analog.
It would be very interesting if you continue with the tutorial. It's really helpful to many for me because I want to buy 2 IP cameras for a live broadcast of a difference of two locations, one static and one mobile.
I wanted to buy IP cameras but did not know how it works but now I found little. What would be the difference between your room and one similar but IP Wireless?
There is a program for managing multiple rooms and vizulizarea all these rooms in the same time (or WEB cameras to be IP)?
The difference between a normal IP camera and one with Wireless is that with the wireless router can connect wirelessly, but when it comes to streaming video cable indicated if we have a little distance mare.Programul management and recording will be presented in soon, you will see how interesting it is and how much we can help a good program.
And I learned something from this tutorial. I want to continue presenting some others.
If you allowed yourself an IP camera, you will be able to afford a router that does not cost more than 100 RON. Plus it will be useful not only for the IP camera…
Execlenta presentation, all the esteem for those who kidnap their free time to others.
Congratulations to all materials not only for this.
It's good that there are people like you .. all is not lost.
Cristi, room ok, but when it comes to the darkness of the night only to do with it, lacks IR LEDs for night What is important. And I am actually an ip camera manufacturer 2 different at the first I ran after her that it was not and I found it is a Compro IP70 with all Wi-Fi, SD card, 1,3mp, integrated speaker , microphone, what room ok and IR LED night with a relay is silent, silent light switches off. What about her Compro IP70 good? and the other is a lousy VGA GRANDTEC ip camera all the IRx6 who sees only gray
Beware, because this statement was not made in this tutorial!
DynDNS from the camera menu it does not activate unless the camera will be connected directly without the interposition of a router!
If using a router, then DynDNS will activate the menu it just it!
Things are not like that chair, I have enabled DDNS from DynDNS in the router and IP camera I used NO-IP, works perfectly, when you enable the DDNS in your router and port but you must make when using the DDNS set in I enter the camera IP camera directly without the need of entering the port after the address.
If it was about two routers can the theory would be standing.
Juggling ports can create magic.
It is a fault somewhere, either due to Dynamic DNS provider's. Instead, DynDNS function of any device TCP / IP is designed to be activated only when there is folosesteg a router. Try and DyNDNS.com and see that somewhere you definitely missing something, because it's not normal situation you mentioned. An anomaly can define a rule.
What fault, you did hear that you can use on the router and the camera / IP camera, or you Whatever you argue?
If you can not does not mean it does not work!
Setting that you need to access multiple cameras, each router has a hostname and that are connected to receive a dynamic IP provider.
Each device is authenticated separately in DNS and DDNS provider's IP and port communicate.
Mark my lips, my friend!
No matter how many cameras you have, connected to ONE router, I CAN'T HAVE EACH DyNDNS, and the respective router another DyNDNS! POINT! Beat the plains, on a situation you haven't even tried… simply, IT CAN'T! If something is not possible, is that what you call the pleasure of contradiction ?!
Again: DynDNS function, the camera menu it (WARNING, not that of the router!) Is specially designed to be activated and only for the case when the camera is connected - on the cable directly without interposing a router ! Also in the menu it stay the same is true for PPPoE function to be activated only in menu it them, and not the router! Maybe try here to set Yorkers to activate PPPoE and .... Who knows, you surprise me and I know you will say that it worked!
The rest are your lab, trial & error stories!
Dude, you're dangerous for naive.
If you keep your stupid mouth, do not put your nose into where it does not. I do not understand why all the frustration and losers perched (in cherry) shall give their opinion, probably because he does not listen to anyone in real life (what a fool I am, it was rhetorical).
I'm sorry, I do not usually act like that, but it got me out of melons fraiericiul.
http://screenr.com/1p6s
I almost forgot, you can also use PPPoE if direct route the fool that you are, only that you need a different username and password from another RDS, understand Mazar-facare?
How stupid,., Yes, I'm even worse because I put myself in his mind!
The specialists who learned from my father Ceasca's books and who barked too (because that's all I know) and give their opinion about the work of others and that's because they are unfortunately unable to do anything better with their "professionalism".
We are specialists in the comments section, we go hard and often stupid with the opinion ONLY on comments but in real life we don't have projects and we don't teach anyone anything we know so that someone doesn't steal our job. In fact, we are "smart" in everything
All you did was prove to me - once more - what dough you are made of, with a language of the lowest order! If you have something to prove and you get angry AND YOU OFFEND HIM - because that's not the case with the Romanians, when he is on his field, he can swear and do what he wants - you have cut yourself the right to defend your cause!
You got it - finally - the true face!
You arrogantly offended first!
You are a man with me, I am a man with you, if you are ragged you do not deserve to be treated nicely. You were arrogant rags while I was trying to explain to you, you weren't, you kept questioning everything and putting me in a bad light….
Shut up when you're wrong, do not get cute. When you get smart and persist in stupidity will never become better.
That's you, the typical novel knows everything and gives lessons at all.
What's the dough kneading?
If you want to prove something, do something! I do, now is the time 23: 33 and I work, do a text tutorial, do it with pleasure and I'm not complaining!
What do you do, come here and ruin what I build, questioning my knowledge?
If we come on here to comment, do it with common sense, not farts and harps.
Can not wait to show us how to make and record with this type of camera. If we make a system such rooms and each room is set separately on the recording we can put grub, each with directories and files them?
Bound we can put the alarm when motion detected in an area to produce a sound (preferably all rooms in the system) and to call the police?
Very nice
If you have a dynamic IP router what?
It was mentioned in the tutorial but if you run and expect to become a specialist on just what suits you and skipping the important things, this is… Good luck!
DVR you buy depending on local needs and supervised by number of rooms. Always good to get a DVR with a larger number of ports to be expanded later surveillance system at no additional cost. And yes, as I said, I'm old-school and prefer analog surveillance systems. The problem is given by the ratio performance / cost, which always has the last word. IP cameras that cost a lot compared to the analog still have connected to a server or a computer system to record local or internet connection plus a solution of routing data packets that are transmitted on the NVR. Appear hardware acquisition costs, which according to the number of rooms must have a computing power and storage space as, problems related to licensing server operating system, and from what I know most of the good run on Windows products appear with other software licensing costs allowing better use of the system which connects via a switch rooms, etc..
I'm not saying your ip is not good or that they are inferior to performance, but the price is much higher and the technology seems far from being mature. When installing a surveillance system, DVR put it in a safe place where only authorized individuals have access to manage and use the system.
The discussion remains open on analog vs. IP cameras, in terms of costs, performance for, and the solution preferred by installers. In the future I'm sure I adopt and IP technology that's natural pace and direction technology goes, I mentioned to you, but right now, I personally do not find mature technology. Progress has been made and the case DVRs by adopting codec h264 plus many others that I'm sure you know, and I do not expose them here.
It remains open for everyone to choose the best solution for him, are free talks about analog vs. IP. Now what are the costs and say the word, and analogue won the battle for now.
I wish you good day.
From the start, when we talk about IP cameras alone significantly increased quality, and therefore an initial amount higher than analog cameras, but:
- only 1% buy DVRs with more ports than the required number of cameras, and when they do, in 99% of cases it proves to be an inefficient choice, as the difference in ports will not be used in full and thus, there is money allocate in vain on a DVR more expensive than the real needs;
- let me "spread" the feeling that a server - for IP cameras - are necessarily servers on a PC, necessarily a version of Windows, whose license, indeed, costs! In fact, most locations monitored with IP cameras are based on NVRs, as a server, which run only simplified Linux distributions, with related applications, in JAVA! OS costs ?! ZERO!
- The H.264 codec (also known as MPEG-4 AVC) EXISTED for a long time on IP cameras, logically long before it existed on DVRs intended for analog cameras.
What we have actually done just now is that, in addition to all the above, the installation of IP cameras for any GREENHORN IS NOT that catch-2 3 bolts several analog cameras, shoot some CATV cable to the DVR and This complete assembly of a video surveillance system! Things got - far-more complicated, obviously longer if anyone handy, involving a skill and / or knowledge muuuulti more advanced in many ways! This is really great reluctance IP cameras, analog cameras versus!
The rest is just a matter of inadequacy!
It would be interesting to do a series of tutorials and surveillance systems on stand-alone DVR with Internet, which have certain advantages over systems with IP cameras.
Xantes it is clear that this is part of a mob of people with low IQ unable to think openly, overall
The crowd that often has a sick tendency to say: "aaa, it doesn't work domle… if it doesn't work it means you can't point" or "aaa, if it doesn't work for me it means it won't work for anyone" or worse they conceived "if it doesn't work for me then it's clearly not good"
People with mental ill and naive to think that everything is set in stone and can not believe it sometimes can make 1 + 1 3 (sarcasm)
We argue that slum: D
If you like children
I am still a child, the child of my parents.
Super tutorial and useful! Thank you!
Just because you talked about cost, often people choose cheaper solution, but choose to connect to the internet. And when you choose to do an internet connection, believe me it does not any greenhorn.
Talking about scalability, that all you say. I said to more ports than necessary because you do not know with time if the owner wants to modify, add, etc.. Since I gave up this field, I jumped in the boat so-called "tech support", although I have nothing to do with it and yes I started learning in all areas by a bit, not any super-specialized Seek triviality implies a kill and service reactivation.
Flirting with the area, we took the inevitable contact with the IP cameras and not impressed me yet. Maladjustment not sure, reluctance to such solutions probably yes, and that is why I prefer old technology and tested, stable, ie analolic + Camera + DVR with ethernet connection to the internet, the cameras IP. Again I say, it's up to your choice of preferences.
And qualification not, trust me. Who is able to install a router to put a password on wi-fi and make a smooth portfoward install an IP camera with all its needs and options.
You should not be guru with CNAP to put it. Installing and IP and analog capabilities we've tested and I saw pluses and minuses. Question for fourth grade: you do when the man would not buy DVR or NVR and has a PC wants to put the cameras used at? I put Ubuntu Server + ZoneReminder? Or you put softu capture card on a system with Windows, which I enable remote control, you Pitesti in a cellar and you learn to connect to another PC on the network? Just asking. Do not forget the flexibility and solutions are many. Combined solutions, find new ones based on existing and not get stuck. Success. This is the last comment about the field. Everybody uses it advantageous solution and others closest to the needs of money out of pocket.
@ Alex, not arguing, just discussing. Of such stuff were born free ideas. French 300 years of history before us, based on polemics and look where Sund. Who has personally than he has to do something with his lips.
Greet you a tutorial for setting DVR cameras by Romtelecom router?
hello, I have a question. I installed a surveillance system with cameras and dvr 9, I'm tired of Porters laptop for me and I want to know what tablet supports IE and ActiveX, as these programs can only view rooms.
Only those tablets that support Win 7 or wait until the future Win 8! There is no Internet Explorer developed for any other operating system yet! Shameful, for M $, but that's the truth!
Hi Cristi, You said in Rmag text as it is available at a price camera.Acum is something better and without a shipping fee refund (I think that they have mastered critical and they brought her) And Now 0 question for you or for other connoisseurs: What about Edimax IC-3030WN room which is cheaper than TP link you described and has aprox.aceiasi parameters plus Wireless but has not 3G.Poate May has other drawbacks that I do not vad.Astept pareri.Multumesc
I think TP is less than the tutorial link that has a sensor 1 / 3 from 1 / 4 TP-Link has IR LEDs and speaker and has incorporat.La what price did you get it? Now I seen on the net it would be cca.600 lei.Important seen is whether good or donTt would interest me too this product and would like to tell me how it goes.
sallll I bought a wirless ip camera and I don't know how to install it can someone help me - this is the camera – http: //www.lightinthebox.com/it/ip-camera-wi-fi-802-11-bgm-jpeg- DDNS-sensation-delimited 16-posizione-presets OSD IR-motion-detection-nero-bianco_p209046.html? utm_campaign = cartcross
Somebody help me how to install plsss
It would be nice to do a tutorial with DVR. settings, connectors .. who is likely to do with DVR would be welcome.
1 year after
I did not expect from Christ
Hi friends, I bought myself a camera so I conectato to a router, the router is connected to a modem (Romtelecom), only at that location works perfectly but at a different location with no internet at RDS I work, I'm missing something but nustiu, maybe you can help me. Thank you!
I am writing because I found similar topic than here
I have a router and a controller IP romtelecom you want LAN connected to the router and that is to bring cameras or other peripherals, each with IP site.
how to set all this, where do I start?
HELLO, I had got a request TO DINE If you can help me. Bought a camera with IP (LYMA-TYPE: IP-562M) EXTEL, AM install from the installation disc and it works but ONLY AN INTERNAL AND AS wish I could see from the outside with mobile phone or a computer and do not know how to proceed. I have more than a week since AN NETWORK ANCERC to launch but fail, if you could help me with something I would be very grateful (so called EXTEL room LYMA TYPE: 562M IP and modem-router is called NETGEAR Wireles ADSL + MODEM ROUTER N300 DGN2200v3) wait your answer. thank f more
Xantes, you are unaware of, do not need cross over cable unless you want to connect the IP camera directly to your computer's LAN port. If you insert the cable from the RDS / UPC / Provider not need cross-over!
I didn't say the same thing… that only in the case of connecting to the network card on the computer, in order to set the area ?! Dehh, if he takes your hand in advance and writes without thinking and reading carefully ?!
And if that link the camera directly to the computer / laptop do not need a crossover. A cable pin connections normally be sufficient. The only concern is to make sure that you are in class aceiaisi ip camera.
hello… .I am very deep in things like surveillance but I called someone to install an internal surveillance camera and he brought me a camera with a small light bulb at the bottom and the eye of the camera surrounded by LEDs. a single cable comes out of this camera, which it connects to the clicknet modem. he / she told me that this camera works even if no light bulb is on and that now I have to call someone to make an appointment or something. QUESTION… .HOW DID HE ASSEMBLE HIM, CONNECTED TO THE MODEM, WITHOUT A LIGHT ON THE CAMERA?
I recently purchased the Edimax IC-3110 ip camera with night view…
Please tell me if it is normal for the IR LEDs to light up a little red (in intensity) when the camera is in night vision. I ask because I intend to have an ip camera as discreet as possible, which does not say "I'm here, come and snatch it"…
Thank you!
It is normal prefect, just because those lights camera can see nocturnal.
Hello ! First of all, I want to thank you for your effort to share our experience! I also have a wireless camera, bought 5 years ago together with a small monitor that captures the video signal, I want to know if I can connect such a camera to the router and if so how can I find their ip from what I saw I need this ip for connection are unfamiliar in the field… .. thanks!
Hello! We have at work, in a store, 3 surveillance cameras connected by IP. The problem is as follows: if I install a viewing / recording program on the PC, the recording files take up a lot of space on the hdd (in one week it took up 120 GB of space. We installed a Smart TV in the store, such as could only the images appear on this Smart TV, not record the cameras, only to see that customers are "monitored"? The image on the desktop PC can not send it on smart TV, because I make another invoice, I send another email and I wouldn't want that image to appear on TV.
I'm dumb in this area and I would like if you can help me with some advice how to set up the cameras. Again, I do not care to record only images appear on the monitor room / TV.
Thank you
Watch your install!
You can choose very easy with a criminal!
Hello !
Please help me with a problem setting 4 Dahua DVR recording channels for viewing online.Cei that I sold all components (cameras, dvr, power, etc) said they can also use a modem (in my case the orange because the location is in a remote area without access to cable internet only phone signal Orange) USB port of DVR but fail to configure.
He also met one problem? Waiting your advice can manage to lconfigurez and can monitor from home. Thanks fine!
Howdy.
I need some ajutor.As want to mount a camera viewfinder instead of the door that can be connected to a mini monitor showing live images of the landing block and also be connected to PC to store images and transmitted on the Internet can view live.Momentan to use a webcam in house with yawcam and I would be interested to do the same thing with the viewfinder.
I am very interested in this ptr 2 days ago my house was broken ptr second time and tend to think it is someone who knows my work schedule.
Thank you.
Please play the song from the beginning of the tutorial (intro understandable)
In primulrand want to thank you for this tutorial is a work of note 10!
if you are preparing for one or more tutorials on this topic I will suggest a configuration with a nanostation connecting several cameras… ..thank you in advance!
Hello
Does anyone know how to access webcam from smart TV? I use it as a surveillance system
cristian hello I bought the product installation video cameras and all you can see all the monitor but the problem is that when I try to connect to another pc me example (I'm in Germany and I want to see my room from romania), do not go any number show model Login rooms blend from ABUS could help with some advice thanks.
sal. Cristi.am conf. An address about ip.cu dyndns.si can see the telefon.fara probleme.cum can conf. The second cam. ip.pe same address or to another address on the same IP DynDNS but .multumesc?
Sal. Cristi
Hello
I bought a lamp sound sensor (microphone). Initially I wanted to be motion sensor. I can replace the sound sensor (microphone) with a PIR sensor?
Hello, Can anyone tell me if you can put one or more IP cameras to DVR.
Thank you.
Very good tutorial! Please about NV Client software can make a tutorial? We lost room nights configuring ip! Regards
Hello ! Can you help me to setup a camera system can see the net on mobile? I digi subscription.
Hello,
I have a router from rds, ZTE model H298N.
In that router I have a IP camera from Hikvision. I made port forward your router and can see the camera and outside the network.
Question: I have a Seagate external hdd 500 gb. If we stick in the USB port, you must do your router settings to make storage from your camcorder?
Thank you for Răspusul.
Emilian