Hi friends, in this video tutorial you will see how to make a USB stick with Windows 8, for this we use WinToFlash and Demon Tools are free software.
A while ago we presented a software from Microsoft that does the same, it was 7 Windows USB / DVD download tool that I made a video tutorial. Unfortunately 7 Windows USB / DVD download tool does not work very well when it comes to Windows 8, even for Windows 7 problems may occur.
WinToFlash is a software that allows us to quickly put WIndows 8 on a USB stick, job cord goes without errors or other problems.
To put WIndows 8 stick with Win To Flash we need a virtual drive, for this we use Demon Tools is a free software (Lite version) that should not be missing from any PC.
If you want to make a bootable USB stick with Windows 8, we need a Windows 8 course, it is found free in Preview Release version on the Microsoft website, you link below.
I decided to do this video tutorial because I wanted to install Windows 8 on the stick and I didn't succeed, that's because I used Windows 7 USB / DVD download tool, when I booted from the stick I noticed that it doesn't work, on the screen the message “Operating system not found” or “missing operating system” does not appear exactly. I decided to remake the stick and this time I used Win To Flash and I succeeded.
It seems that Windows 7 USB / DVD download tool has some problems that I had the patience to fix them at that time. Today we're timplu sometimes necessary, to resolve errors. Project 7 Windows USB / DVD download tool was somewhat abandoned because Microsoft seems to use open source code for this program, immoral thing considering that Microsoft sells Windows.
However, WinToFlash go and do very well. Be careful while downloading, do not take the first version is an executable that will be filled with bloatware, use the following link or two. Take care and Demon Tools, are full of bloatware software, we must understand that, but are free.
Download Windows 8 Release Preview - free
Download Demon Tools Lite - free
Download WinToFlash - free
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 800 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.Instructions for use videotutorial.ro
Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !
by Cristian Cismaru
I have a Kingston Data Traveler USB stick with windows101 4GB 7 of the 64 bit on it and I want to know how you should format it in windows after that to put winsows 8 him.
After you save all the stick, get the formatting (fat32) and then you can put windows on it 8. And WinToFlash formatting but it is better to have them all right.
It would be advisable to format and uncheck obtiunea fat32 quick. The operation will take aprximativ 10-15 minutes. Obtiunea unchecking quick and as shown in the tutorial you will have problems. Success.
I'm only doing WinToFlash sticks bootable Windows 7 and works perfectly without any problems, I have a small stick is actually a microSD card reader and a card he got A-on and go super fast 4GB 7 Windows installation. I only have this software components used, no other software, this razor went first.
Cristi is a tutorial WinToFlash: https://www.videotutorial.ro/?p=2737 and there say that after the first boot from usb restart must enter the BIOS and change the HDD boot path. It is true in this case and if we can create the bootable stick on win xp sp3? and I posted a problem with Camtasia if you can tell me something. Thanks
I tried the program from Microsoft and had no problems .. I also installed win with him (win8)
And allocation unit size bytes or let them give 4096 default allocation size?
was not simply the WinUSB Maker
http://www.joshcellsoftwares.com/2012/06/WinUSBMaker.html
Hi Cristi, very good tutorial! I have a proposal for a tutorial, more precisely to make a tutorial about "Windows 8 To Go". It would be very useful in my opinion. Goodbye and more tutorials 🙂
Do you understand what you like DAEMON complicated when you are PowerISO! I of 2006 since I discovered they use and install, and writing .. why do space and daemon with ImgBurn / CD Burner XP / Nero etc when you can have a program in 2 1?
My suggestion consists of the following programs:
Rufus or WiNToBootic.Sunt simple programs without daemon tools no other complicatii.Asta inenteles if you decide not to use their own utiitarul created by Microsoft called Windows 7 usb dvd tool.
Respect.
It's a matter of habit. Everyone uses what he wants. Do tutorials too and give an example that you use… blah, blah, blah and I'll come and tell you why you use that and don't use "virtualCD", that it's smaller and better and…. Empty words. The world is full of critics, of PEOPLE like Cristi, Adrian… RARE, very RARE.
I downloaded Windows Build 8 9200 I wanted to install in wmware player and got to step Input your destination where you have to show what I tried to stick with the official series from Microsoft for Windows 8 Release Preview (TK8TP-9JN6P-7X7WW-RFFTV-B7QPF ) and I went what she do?
Christ used Daemon Tools Lite because it's free, it would not be good for Power Iso and you come here and brag about using Power Iso (big deal). And I use Power Iso key but with different sites on the net and do not have money for that and if I had I would not give money liciente, as well as Windows. If you still brag using Power Iso take a photo and show you gave those 29.95 $ per licienta, but I bet you key sites on the net!
Why do you think went wrong?
I did a stick but windows xp install Windows hard stick, quickly go on dvd.
Put the correct series, you can find it on the net! But you will not be able to activate it after installation… .The KMS server is not active yet.
Simple, after the first restart, remove the stick, you do not enter any BIOS…
I used "Windows 8 USB Installer Maker", the program is ok, write the ISO image directly on the stick.
Win 8 64 the bit I could not install the stick, but one bit I managed 32. I think we need to have the system running on 64bit that I can install on the stick all the 64 bit ..?
Very good tutorial, thank Cristi!
I used Power ISO to put Windows 8 stick without any other tool on him.
Respect for what you do.
Mr. Cristi CIBOX have a stick with two partitions (so I bought it) and I can not delete the partition smaller. I did however boot from my boot partition sees only small and does not work. How do you have only one partition, you can boot it?
Best regards!
We aim for a long time and so I arrived at 8 windows. I have a new system configured by you, ie: MB H61ICAFE: I3 2100-3,1Gb: 8G ram: WD HDD video GT430 500G + Maxtor 80G.
When I installed version appeared on Windows 8 32 bit and everything was OK.
8 Win + Win XP. Today I made a stick with win8 / 64biti. But I got the message that the installation can not be installed on the MBR but the GPT. Honestly I have not heard of GPT. Varog if you can enlighten me on how I can do a conversion GPT and MBR if I should do that.
Thank you for your help.
Hi everyone,
For those who want an alternative to Daemon Tools, use - gBurner Virtual Drive 3.2. A simple program, easy to use and lastly, FREE.
http://www.gburner.com/online-help/virtual-drive.htm
Goes perfectly with their utility. Criati probably has a problem in the system.
Salut.Daca instead of using power iso daemon tools, go?'m Thinking it's all a program to mount the ISO image and not only, so you kind of have to go there?
Hello and how do I do that and give cristi can use power-iso any program installs as do daemon tools.
It can make a bootable stick that to put win xp and win win7 8?
I installed windows 7 ultimate 32 bit iso with the Windows 7 USB / DVD program and I had no problems installing it, I am writing this from your operating system made with Windows 7 USB / DVD but I also made one with windows vista iso, all with Windows 7 USB / DVD <anyway I have the other one 😀
Hello! .I have a big problem that I have been facing for almost a week and I can't figure it out. I have windows 7 as an operating system and I want to put windows 8 on a stick because my dvd r doesn't work read the dvds, read only the original ones. and I can't make this usb, I tried with a lot of programs and it doesn't work bootable. please help me !!!!! yo_liviu11 is my id… .I have a great nephew for help.thanks
Thanks Cristi upload, super nice and easy to botat on stik, I resuit without any problem
Good morning, (it's morning now when I write
I have a question, we stick 8GB (Hama 6MB / sec, 00090891)
I want to make the stick bootable with Windows 8 more on my înţelesu to do it as I make a DVD with Windows 8 my question is this:
It's good stick if so, follow videotutorialu above? If not, why not good?
Another thing is stick format and Windows FAT32 who want to put it on the stick's ISO format 3.33GB.
Thanks and waiting for a reply URGENT
for Alex
Stick is good and gives tutorialul.Daca will have problems with the system size can stick as NTFS format
I followed all the steps I did, but after I restart F12 press the boot menu appears and choose (USB HDD) but it boots and I can say that I set USB HDD frist device in the BIOS.
Please kindly help me!
Tomorrow I'll post a solution for cases where a USB Stick or becomes nebootabil. Thing happened to me, several times with several USB sticks
Pretty please let me know what to do and how to see if it bootable without restart.
It is not our duty to let you know. Precisely for this reason, any website has in the sidebar top right or left the box "subscribe" or how we have "SUBSCRIPTION" as the one who wants to stay up to date with the new articles to be posted. Enter your personal email address in the "SUBSCRIPTION" field then click on the red "Send" button. You will receive on your email account an email from us in which you will have a link that you will have to click (access) to confirm the subscription. Subscribing by email to our site and generally to other sites is free and costs nothing. When we post new video tutorials, you will be notified by email
Now a question for you: why no restart? unprieten you said yourself it's not better to give resets?
Abonamentu thing I know, but as I think there are many tutorials on the day ...
How about restart no one told me I just thought it's probably the first time with stick
Finally you could help me today to know if they look elsewhere.
We used to post 1, 2 maximum tutorials someday. so you do not get too many emails from us.
Eventually you can help me
Hello
Windows CE is going to put it may be images and need to open it with daemon tools
A good and interesting tutorial! Thanks, I got it right! LIKE for all the great work that a deposit!
Hi guys, I also have a question, about windows 8, I installed it, activated it, it works ok, only when from the Metro-Ui interface I press the "windows" key to show my desktop, it appears the desktop, only my wallpaper doesn't load, the color from the Metro-Ui interface remains, and no part of the icons appear, I always have to refresh it to appear! some advice… thanks!
I can not install Windows on 8 32 enterprise-2 3 bit.Astept min then gives me an error and Needs to restart your computer.
Very useful this tutorial. Good job
Thank you very much!
Hello, you have a laptop with Intel(R) Pentium(R) CPU B960 @ 2.20GHz configuration. 4.00 GB ram, I can't install Windows 8 on 64 bits, it gives me an error. Why?
What error do you see exactly? Under what conditions? Yes more details.
Hello Cristi do a tutorial about how to install Windows on a laptop with an old uefi.metoda installation of Windows is not working.
hello, if I did stick bootable with Windows on it can to keep it there and reinstall Windows whenever I need?
hello i have a question Cristi question is that how you osa can boot the Windows XP gb stick 4
To make a bootable USB Windows XP use Rufus. See you on the site tutorial. You find him using the search box.
Cristi links are not going to send me elsewhere me what to do please tell me