D-Link DIR router configuration 655 for Romtelecom, RDS, UPC, internet starter, 3G - video tutorial

D-Link DIR router configuration 655 for Romtelecom, RDS, UPC, internet starter, 3G - video tutorial
4.18 (17) 83.53%

Hi friends, in this tutorial I will present a router from D-Link, it is the model DIR 655, will present everything you can present to a router, even if you have no router from D-Link, you will surely learn many useful things.
The menus for this router resembles drop all routers from D-Link made lately of course probably will stuff more or less but the location and main functions are the same.
D-Link DIR 655 is a router that knows how to do many, a surprise to many useful functions this device has: QOS Engine technology that knows how to give priority to certain applications for example to others vs. browser manager download, Wireless N (300 Mbps), Gigabit ports, the USB multifunction that we can bagam be a modem 3G be a storage device (USB stick, external hard drive) Guest Zone is a second wireless network that the router a can create, in addition to these interesting features D-Link DIR 655 router has an enviable stability and a long-range coverage, plus it does not require the type of router you never reset basically is anti bullet.
I will show almost all functions of the router, I am sure that in the end you will appreciate this router.
Usually people think a router as a common object, the router no longer has long been a simple "divisor" of net, a router is as a computer has its own processor, RAM, flash, operating system ( firmware), if you use a router head we see that we can obtain some results that the wait just before the software.
A router can be used: to automatically limit the time spent by someone on the net, to limit access to some Web addresses, manage bandwidth allocated to certain applications, etc. etc.
The router can connect multiple IP cameras, so we can do our own video surveillance system.
A good router used effectively can improve our life, plus a good router knows how to work with all types of connections, settings below have major types of connections.

Set router for Romtelecom:
Choose from the drop down "Dynamic IP" and saved.

Set for RDS:
Choose from the drop down PPPoE (username / password) tick Dynamic IP, enter the user name and password, the "Reconnect Mode" tick "Always on", make the MTU 1492 and saved.

Set router for net neighborhood (MAC Authentication):
Choose from the drop down "Static IP", insert ip, dns, subnet etc then cloned MAC by clicking on "Clone Your PC MAC Address".

Set router for connections that are made through Internet application Starter:
Like the mac romtelecon + cloning, in addition, the application must be turned Starter Internet.
Good luck with that!
TRENDnet router if you can follow this tutorial TRENDnet router port forwarding on
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
Enjoy !

by Cristian Cismaru


Get the Flash Player to see the wordTube Media Player.

FacebooktwitterGOOGLE_PLUSreddit

Related Tutorials



About Cristian Cismaru

I love everything related to IT & C, I like to share the experience and information that we accumulate every day.
Learn as you learn!

Comments

  1. camellia said:

    Cristi useful tutorial ms

    View Comment
  2. rosg ft cv and I will play you could help me and me with something?
    I want to launch e vb cv site and can not you be doing?
    miam bought the domain and hosting and goes ... dc? what aces do? please help in soul-ma.dak mss do not bother ... more

    View Comment
    • Adrian admin said:

      Daniel: I will rosg cv ft and beautiful you could help me and me with something?
      I want to launch e vb cv site and can not you be doing?
      miam bought the domain and hosting and goes ... dc? what aces do? please help in soul-ma.dak mss do not bother ... more

      one that you had to come and post on-topic ... well ...
      Use the search box at the top right of the black border: you writing 1 creating the site, you enter and you will find the tutorial. We have a number of 6 tutorials on this subject, to find episode 2 writing in the search box: website creation from 2, to find episodu 3 writing in the search box: website creation from 3, you enter and so to Episode 6

      View Comment
  3. Interestingly tutorial but I do not know if it would be useful and other tutorial like this, there would not be welcome, perhaps to unite not many of us but not all routers have money ... or how the tutorial was good! Good luck in the future!

    View Comment
  4. Cristi I have a request to you what phone to get my myself what about LG Optimus One P500 good as I have enough money for htc how you got I wanted to take my htc desire but expensive and no money so I want something somewhat quality but with android, and still something I saw on some phones write a-GPS means but GPS simply know that means gps but do not know how to take them have integrated not integrated a-GPS lamurestema and me. What htc phone that you currently have? And please tell me if it's good P500 LG Optimus One? Wait for response :). Good day Cristi

    View Comment
  5. Super tutorial, I dropped a shame we had Dlink in 635 6 months twice problems connecting to the internet, simply no longer connect to net.Noroc as it was under warranty and I changed Trendnet 634GRU.

    View Comment
  6. If not with anger - and it would be - make some notes:
    -If (modem) router-to-at Romtelecom you have it set in "Bridge", then
    follow the set-arils as those for RDS;
    -If you have Internet UPC, then just choose Dynamic IP and
    introduces cloning, network card MAC computer with
    you have registered the UPC network.

    Why did you set the (modem) router to ClickNet in "Bridge"? For the simple reason that you will not have to open ports (operaratiune known as Port Forwading) both (modem) router at Romtelecom, and in your router, I purchased. Putting (modem) router Rometelcom in "Bridge" will only open ports in your router, which will greatly facilitate any future set-ari to your LAN network.
    Stringing of the second router - as at present - followed by one from Romtelecom is called "cascading". Basically a inserirere traversing the two, one after another, but not a series marking as some might think, the one that is done in an electrical circuit, but a concatenation of a device after the other.
    ATTENTION: those who have a router (wireless, how new, new subscriptions Clicknet we provide) with 4 LAN ports, ie a router that can give 4 Internet computers, Ethernet cable (without taking into calculating a switch!) did not need a second router (wireless or not!), as received from the Romtelecom can do the same things and the second router used in this tutorial! The second router is only for those who use a modem-router cun one Ethernet port and that it will "cascade" with the wireless router you purchased.

    View Comment
    • Xantes: If not with anger - and it would be - make some notes:
      -If (modem) Router software from Romtelecom you have set-at the "Bridge" atunciurmati set-arils as those for RDS;
      -If you have Internet UPC, then just choose Dynamic IP and seintroduce for cloning MAC computer's network card you registered with some network UPC.De you have set the (modem) router the Clicknet in "Bridge"? For the simple reason that it will not need to open ports (known as Port operaratiune Forwading) both (modem) router from Romtelecom and in your router, purchased by you. Putting (modem) router Rometelcom in "Bridge" will only open ports in your router, which will greatly facilitate any subsequent set-ari to your LAN network.
      Stringing of the second router - as at present - followed by the Romtelecom is called "cascading". Basically a inserirere the two traversing one after another, but a series marking as some might think that the one that is done in an electrical circuit, but a chain of a device after the other.
      WARNING: those who have a router (wireless, as newer, new subscriptions Clicknet it provides) with 4 LAN ports, ie a router that can give Internet 4 computers, wire Ethernet (without taking into calculating a switch!), do not need a second router (wireless or not!), as the one received from Romtelecom can do the same things and the second router used in this tutorial! The second router is only for those who use a router modem cun one Ethernet port and that it will "cascade" of the wireless router you purchased.

      Why upset me even more vivid please with completions.

      View Comment
  7. Speaking of "third party firmware" ... This wireless router does not support firmware from DD-WRT! Do not try, you will remain without router!

    View Comment
    • Xantes: Speaking of "third party firmware" ... this wireless router does not support firmware from DD-WRT !!! Do not try, you will remain without router!

      Yes, it is, I said it in tutorial, this router processor still does not support custom firmwares, maybe the future will do something about it.

      View Comment
  8. rootalkin said:

    I have a question. Is there SharePort software for Linux?

    View Comment
  9. I come with a supplement for those who - as with router girl - has class IPs allocated as: "192.168.0.1" to a change in form or "192.168.1.1" or "192.168.2.1". Why and when is it useful to change the class of IPs?
    If you - for various reasons are not far to develop the idea - you want to share an Internet connection look - from another computer via the network card wired and wireless built in, as long as the router Your class has allocated IPs of "192.168.0.1" wireless network card of the computer that uieste share Internet connection, and it will assign IPs in the same class: "192.168.0.1" and you will have a conflict of IP- Links!
    For this need to change class IP router, as described above and thus the network card of the computer that shares uieste Internet connection can allocate IPs class "192.168.0.1" and other computers will take the Internet connection on their wireless card.

    View Comment
    • webdan said:

      Xantes: I come with a complement for those who - as with router girl - has class IPs allocated as: "192.168.0.1" to change shape, either: "192.168.1.1" or "192.168.2.1" . Why and when is it useful to change the class IPs?
      If you - for various reasons, are not developing their idea - you want to share look an Internet connection - from another computer via the network card wired and wireless embedded as long as the router your class has allocated IPs "192.168.0.1" wireless network card to the computer that shares uieste Internet connection, and it will assign IPs in the same class, "192.168.0.1" and you have a conflict of IP- hate!
      For this need to change class IP router, as described above and thus the network card of the computer that shares uieste Internet connection will be able to assign IPs class "192.168.0.1" and other computers will take over the Internet connection, wireless on their plate.

      Ok, change class router's IP, but you did nothing to change specified "range" (range) of IPs that need to allocate router-class ul.Degeaba I changed the router's IP if I have not changed and "beach" (range) of IPs that need to allocate router-router ul.Apoi if I why should I look complicate network share, the cost difference between a simple and one wireless router not so great, it does get complicated with the wireless network I share here.

      View Comment
  10. costel08_78 said:

    Very good this tutoriel.
    I posted my problem from you I hope you do not mind me back with the same problem but can not you find a router rezolvare.Am from romtelecom model (Huawei 655b hg) on ​​windows I have no problems with pages or ancarcatul downloading torrents is going very bine.Problema on linux (ubuntu 10.10) ancarca me hard all the pages I click net power 30 mg / s VDSL and any downloaded torrents to default on the utility transmission ami go 30-70 kb / s slab.ce eff s what settings you make it work well on ubuntu ?? someone told me to do to automatically connect the ... .How do something like that ?? no one else has prbm same as me ?? will thank you.

    View Comment
  11. I wish you good Važić as fati a very good job and I think the best would be a tutpril you how to put two windows on the pc-s wait goodbye

    View Comment
  12. I have a huge request, I have a D-Link DIR 600 router and modem speedTouck (USB). I do not know him through this modem connection to the Internet. I do not have network cable that tie me to the router. Can someone help with practical advice?

    View Comment
    • Adrian admin said:

      BebeteI have a huge request, I have a D-Link DIR 600 router and modem speedTouck (USB). I do not know him through this modem connection to the Internet. I do not have network cable that tie me to the router. Can someone help with practical advice?

      Well shown in the tutorial just that: to connect a USB modem to the router, the router must have a USB port. Look at the tutorial without running head-tail that showed how doing this, namely as a USB modem connected to a router with USB port

      View Comment
  13. Adrian admin said:

    Bebete, your router has a USB port so you can not connect the modem to the router, at least not your router. one presented by Cristi has a USB port.

    View Comment
  14. sal, while a tutorial on how to download internet speeds if you have Windows 7, thank you for further tutorials and good luck

    View Comment
    • Adrian admin said:

      Dony: Sal, while a tutorial on how to download internet speeds if you have Windows 7, thank you for further tutorials and good luck

      speed is the one that gives you a net provider, the company from which you internet. Want more speed when you do play a larger subscription. Speed ​​goes "marry" As everyone wants sirloin ... If you have a thick pipe as you and I 5 dripping drops of water a day flow through that pipe as you well 5 drops a day to run, no matter how thick you could / would you do pipe

      View Comment
      • Adrian admin:
        Speed ​​is what gives you a net provider of firm to which you have internet. Want more speed, then you do play a larger subscription. Speed ​​does not go "increased" so as like sirloin everyone ... If you have a pipe thick as you and I dripping 5 drops of water per day that flow through the pipe that as you well 5 drops a day it flow, however thick you could / would you do pipe  

        hello adrian, well pay for a higher speed k per contract write k I speed 20 mb / s and only download with 200 kb / s and sometimes load and heavy websites and youtube I go hard, are England, was not in romania.cand aksa download and 1 mb / s and here the same torrent site that we might use and aksa fail to have somewhat acceptable download speeds and aploud does not move me at all. I did a speedtest and shows me e k download speed of 5,95mb / s and uploud's 0,49 mb / s.

        View Comment
  15. Hello!

    I have a USB stick queries if 3g RDS (mobile internet). What settings should I do in that category router to use it? Thanks for the tutorial.

    View Comment
    • AlexHi! I have a stick's queries if 3g RDS (mobile internet). What settings should I do in that category router to use it? Thanks for the tutorial.

      Possibly more watch tutorialStep by step and try by probing with each option in that category. I would also be interested in the option of connecting a USB modem from RDS, but for those who have this type of router, did we think you should be a problem, because they posiblitatea try the options available at our disposal, to In contrast to me, who have this router.

      View Comment
  16. cu_minte said:

    Hello and I found! It can connect with a mobile internet stick from ClickNet romtelecom? Thank you for any answers.

    View Comment
  17. Cristi good net from romtelecom I now again and I do not know how to have wireless internet on mobile Adika I tried 19216801 and those figures do not find anything you need to do many thanks sara

    View Comment
  18. bogdangelu said:

    Hello.
    I follow with interest and I have subscribed to email to see new tutorials you faceti.Am 2 months of this router model nor yet we did not sign anything (stick, external HD) USB port, following I saw the tutorial you reach the Setup USB Settings I do not ,, Enable SharePort for setting appears Guest Zone http://img193.imageshack.us/img193/5784/dir655.png .Aveam 1.32 latest firmware and SharePort software downloads have 1.15.Cand did you come to your SharePort year saw a new version appeared to him and to firmware.Le I downloaded both but the same problem, router via USB port SharePort software enabled device does not detect any anticipated atasat.Multumesc

    View Comment
    • bogdangelu:
      Hello.
      I follow with interest and I have subscribed to email to see new tutorials you faceti.Am 2 months of this router model nor yet we did not sign anything (stick, external HD) USB port, following I saw the tutorial you reach the Setup USB Settings I do not ,, Enable SharePort for setting appears Guest Zone http://img193.imageshack.us/img193/5784/dir655.png .Aveam 1.32 latest firmware and SharePort software downloads have 1.15.Cand did you come to your SharePort year saw a new version appeared to him and to firmware.Le I downloaded both but the same problem, router via USB port SharePort software enabled device does not detect any anticipated atasat.Multumesc

      bogdangelu:
      Hello.
      I follow with interest and I have subscribed to email to see new tutorials you faceti.Am 2 months of this router model nor yet we did not sign anything (stick, external HD) USB port, following I saw the tutorial you reach the Setup USB Settings I do not ,, Enable SharePort for setting appears Guest Zone http://img193.imageshack.us/img193/5784/dir655.png .Aveam 1.32 latest firmware and SharePort software downloads have 1.15.Cand did you come to your SharePort year saw a new version appeared to him and to firmware.Le I downloaded both but the same problem, router via USB port SharePort software enabled device does not detect any anticipated atasat.Multumesc

      I bought myself about a month this router. Neither me SharePort software does not detect any USB device. I bought because the tutorial video here. I installed Windows XP on two computers and ... the same behavior. the router's firmware is now 2.00 and on ftp from DLINK SharePort I took last

      View Comment
  19. Hello, I have a D-Link router but another model (DL-524) settings do as I do, but I do not know how to have a net present montat.In UPC, and they gave me a ie a cable modem comes in a cable modem then goes to one PC and the phone, but the thing is I do not know if going to mount it.

    View Comment
    • AugustinHi, I have a D-Link router but another model (DL-524) settings do as I do, but I do not know how to have a net present montat.In UPC, and they gave me ie a cable modem comes in a cable modem then goes to one PC and the phone, but the thing is I do not know if going to mount it.

      If you have patience - even read those comments that you find something really CAN - you would not have come to such a question.
      I left a comment immediately after the occurrence of this videotutorial you bring as a supplement details for virtually all cases of Internet connections.
      Therefore, for those who have Internet UPC, a router is cascadeaza (that connects one to the other, or one after the other, as you do not!), As follows:
      -Using the same cable coming out of the UPC converter, instead of introducing it into the computer, you will enter into the hole in which the right write either the Internet or WAN, the router. 4 of one of the holes which, in the vast majority of their write LAN router, you'll come to another cable, with one end inserted into the router and the other computer.

      CAREFUL! for set-area in router: the UPC sparing MAC network card to the computer with which you've already signed, first to the Internet and must therefore be that set-arils router to clone MAC board network, by entering that MAC (an array, numeric digits and letters) in the box required in router.

      View Comment
  20. I myself router D-link dir 300, we managed to configure, download go 5-7 mb / sec, but the upload goes with maximum 0,3mb / sec versus 5 mb / sec as I go without router .

    View Comment
  21. they put firmware on a D-Link wireless 635 nice thank you

    View Comment
  22. Hello,

    I have a bigger problem sucks, I could not give him head DDE.
    I net from Romtelecom, namely click-net, and gave me a Huawei modem mt882 later I bought my wireles router, and can not put the plug in ADSL modem directly enter wireles.cum can wireles router do? wireles router is TP-LINK TL-WR740n

    View Comment
    • AdrianGudus said:

      IsaacHi, I have a bigger problem sucks, I could not give him head DDE.
      I net from Romtelecom, namely click-net, and gave me a Huawei modem mt882 later I bought my wireles router, and can not put the plug in ADSL modem directly enter wireles.cum can wireles router do? wireles router is TP-LINK TL-WR740n

      You can not do this ... let RJ 11 phone jack and the modem in modem with RJ 45 out and get connected to the router and the WAN router with a cable going and what has one RJ 45 at each end in the PC, that the cable end, I put an end to the LAN router and the other end into your PC, then you will need to do some settings in the router as mentioned in the above video tutorial.

      View Comment
  23. Very interesting tutorial, I'm going to get myself a dir-600, because the 80 square meters is how my apartment I need 3 antennas.

    View Comment
  24. Mr. Cristi, I have have a question about this model DIR-655.
    I some time I bought a dlink DIR-600 and noticed that Messenger has some "anomalies". In what consists this:

    If I open a torrent client (uTorrent, Vuze etc) or program type Strong DC + +, then instant messenger programs suffer. I mean when I type something and give Enter or "send" replica arrive late to the other person (or you may not get at all). The same happens when I write something the other person (lines end with late .... 5 10 minutes). Messenger also disconnects and reconnects frequently.

    Problems like this occur even if you use another client to connect to Yahoo (Digsby or Pidgin). Using my pidgin I connected and Google Talk. The same symptoms appear here.

    We had a router head for days ... I tried several things including:
    -Reset
    QoS-activation and customization
    Port forwarding (DMZ for that computer to make sure that I have no problem with opening ports)
    -Update firmware

    No results ... Ultimately I replaced the firmware from dlink with a custom firmware from dd-wrt.com. Now there are problems.

    Question: The D-Link DIR 655 shows the same abnormalities as the model D-link DIR 600? Have you ever encounter such problems on this model router?

    View Comment
  25. F. Good tutorial, bravo!
    Do they really have me with these security settings on wireless so I have a problem to connect my smartphone to router DIR-655 that I just installed. I set exactly as in tutorial (WPA2 with AES), we defined the 63 preshared key characters (with all kinds of characters: @ # $ '"{} [] \ _ + -, etc). The phone found the router SSID defined by me and write under it 'Secured with WPA / PSK WPA2' but when I want to connect my bag not know what the password was. Besides the pre-shared key I defined a password in the router configuration. We introduced the phone, pre-shared key as the password but not connected, moreover, came from me writing 'Disabled' as my access point.
    Someone can enlighten me what to do?
    Thank you!

    View Comment
  26. I solved the problem. I ran the setup wizard wireless router and left to generate the key. I put the same key in smartphone and went. Thanks anyway

    View Comment
  27. Hi Adrian I have a problem I 2 PC. and wants to connect them both net of Romtelecom hghttp have a router :/ / rds www.huaweidevice.com/worldwide/productInfo.do?pinfoId=2215&directoryId=2663&treeId=663 net and the problem is that I connect to the net with old calculatoru and it new settings do not work as I tried to do what u do in the tutorial but it does not work and no call go ala ala ip of the router I have it in his book .... What should I do Thanks!

    View Comment
  28. Hello,

    I have a dir-600 router and can not access the page. A few days ago I had problems with netul and I called in the RDS, I do not know what they did, but now works on direct netul and the router.

    I gave reset, and tried to configure it with cd, follow the steps and when the wire net bag and give my next says it can not find the router.

    Thank you

    View Comment
    • FlorinHi, I have a dir-600 router and can not access the page. A few days ago I had problems with netul and I called in the RDS, I do not know what they did, but now works on direct netul and gave nu.Am reset the router, and I tried to configure with cd, follow the steps and when the wire net bag and give next it says it can not find the router.
      Thank you

      Cable to the WAN jack RDS(Or Internet) and another Ethernet cable inserts into the router, in one of the LAN jacks (4 are the same) and the other end of the end inserts into the network card (wired) computer. Then follow the steps below:

      If you ever want to set your router Yorkers get into a browser IP router configuration - which from what I remember is I bring 192.168.2.1 - and enter the username and password allocated Skip to factory configuration, the PPPoE connection set-area and enter the username and password assigned by your Internet cotractul RDS.

      If all else fails you can go into the setup menu it, you'll need a crossover cable and a few other set-air the network card of the computer.
      But first leave here a message with the details and I will return to what you have to do in case you can not with those given above.

      FlorinHi, I have a dir-600 router and can not access the page. A few days ago I had problems with netul and I called in the RDS, I do not know what they did, but now works on direct netul and gave nu.Am reset the router, and I tried to configure with cd, follow the steps and when the wire net bag and give next it says it can not find the router.
      Thank you

      View Comment
  29. Hi, I have a DLINK router 635 that fail to pair mobile devices (PDA, mobile phone with android Samsung) PC and laptop go perfect.Un a tip? thank

    View Comment
    • adrianHi, I have a DLINK router 635 that fail to pair mobile devices (PDA, mobile phone with android Samsung) PC and laptop go perfect.Un a tip? Thank

      If you have these filtering router set-ate the wires connected computers and wireless:

      -At least WPA2
      -Filtering MAC
      then at least one of these reasons make impsobila, wireless connection with them. In the sense that many phones does not support WPA2 security protocol. Some only supports WEP, WPA and some maximum. On the one hand, on the other, there's no point to have MAC filtering (which is somewhat difficult to do) for your Android phone and PDA that.

      In the above case, if this is why you can not connect, then there is a solution only if your router has the option "multi SSD". This means that you can assign a separate connection - wireless (with another SSID) - to secure various types (ie, it can set the WEP or WPA) wireless to each other that you WPA2 filter.

      View Comment
      • Xantes:
        If you have these filtering router set-ate the wires connected computers and wireless:-At least WPA2
        -Filtering MAC
        then at least one of these reasons make impsobila, wireless connection with them. In the sense that many phones does not support WPA2 security protocol. Some only supports WEP, WPA and some maximum. On the aside, on the other, there's no point to have MAC filtering (which is somewhat difficult to do) for your Android phone and that PDA.In above case, if this is why you can not connect, then there is a solution only if your router has the option "multi SSD". This means that you can assign a separate connection - wireless (with another SSID) - to secure various types (ie, it can set the WEP or WPA) wireless to each other that you WPA2 filter.

        Thanks for the reply
        I had a DLINK 524 before that worked perfectly just do not have great coverage. connect all devices perfect.La model 635 mobile devices (PDA MIO I560 550 and Samsung) have internet traffic although I see sees reteaua.PC network and access to the MAC filte internet.Nu I have updated Firmware Version: 2.34EU with version B3.Toate devices support WPA \ WPA2

        View Comment
  30. welcome.
    If you can help me in a problem with a router tp link tl wr 740 n.Deci I installed the firmware upgrade I did a week I had no problems with it but for once he failed, although the router and the laptop goes with me shows me connected to it is connected to the net but can not access netul.Am system and log into the router and as I say there are not probleme.Am tried a modem USB rds idea that I fell in network card, but it works without any problem.
    Thank you in advance.

    View Comment
    • Xantes said:

      nicolae: Welcome.
      If you can help me in a problem with a router tp link tl wr 740 n.Deci I installed the firmware upgrade I did a week I had no problems with it but for once he failed, although as routerulmerge and laptop that I connect to it shows me that it is connected to the net but can not access the system netul.Am and log into the router and as I say there are not probleme.Am tried a USB modem rds from the idea that I fell NIC, but it goes without any problem.
      Thank you in advance.

      Connecting a USB modem mobile Internet connection - regardless of service provider, does not prove anything at all your motherboard dysfunction wired network, or the computer! In other words, wired network card on that computer is most likely still work, but to convince you, right or wrong I take your laptop and go to a friend and connect to an Internet connection, cable Ethernet.
      A USB modem not realize Internet connection using the wired network card to the host computer, but the USB modem is included in, or emulation which makes software that comes with USB modem!

      As a solution to your problem - from what you say it does not appear - enter it re-set your router through specific re-set button, usually located behind Souter and take it through to set-aryl router site, because apparently do something but do not completely well, until the end. On the other hand, what you have not mentioned, mentioning also is providing Internet from your home so we can figure out about where you - if you - some mistakes.

      View Comment
      • nicolae said:

        Xantes:
        Connecting a USB modem mobile Internet connection - regardless of service provider, does not prove anything at all your motherboard dysfunction wired network, or the computer! In other words, wired network card on that computer is most likely still work, but to convince you, right or wrong I take your laptop and go to a friend and connect to an Internet connection, cable Ethernet.
        A USB modem not realize Internet connection using the wired network card to the host computer, but the USB modem is included in, or emulation which makes software that comes with USB modem! That the solution to your problem - from what you say it does not appear - enter it re-set your router through specific re-set button, usually located behind Souter and take it through to set-aryl router, because apparently do something but do not completely well until the end. On the other hand, what you have not mentioned, mentioning also is providing Internet from your home so we can figure out about where you - if you - some mistakes.

        First, thanks for reply, so about what you said, I connected the laptop to an ethernet cable and go smoothly, I reset the router and reset button but with no effect, so I did and I reinstalled the software but degeaba.Furnizorul is RDS and Internet connection type is PPPoE, and frankly if you do not know where I was wrong after I installed it first went a week without problems, another thing I've done with the idea that maybe a USB modem is faulty and that I changer with a new modem, but still nothing.

        Xantes:
        Connecting a USB modem mobile Internet connection - regardless of service provider, does not prove anything at all your motherboard dysfunction wired network, or the computer! In other words, wired network card on that computer is most likely still work, but to convince you, right or wrong I take your laptop and go to a friend and connect to an Internet connection, cable Ethernet.
        A USB modem not realize Internet connection using the wired network card to the host computer, but the USB modem is included in, or emulation which makes software that comes with USB modem! That the solution to your problem - from what you say it does not appear - enter it re-set your router through specific re-set button, usually located behind Souter and take it through to set-aryl router, because apparently do something but do not completely well until the end. On the other hand, what you have not mentioned, mentioning also is providing Internet from your home so we can figure out about where you - if you - some mistakes.

        View Comment
        • AdrianGudus said:

          nicolae:
          First, thanks for reply, so about what you said, I connected the laptop to an ethernet cable and go smoothly, I reset the router and reset button but with no effect, so I did and I reinstalled the software but degeaba.Furnizorul is RDS and Internet connection type is PPPoE, and frankly if you do not know where I was wrong after I installed it first went a week without problems, another thing I've done with the idea that maybe a USB modem is faulty and that I changer with a new modem, but still nothing.
            

          When you connect the router to RDS (WAN> PPPoE) in the field "Service Name:" Do not write anything, leave blank. On many routers, if you fill something in that field, you do not make the connection and you alone ... you can set what you want. Do what I said and see if it resolves. Return the result ...

          View Comment
          • nicolae said:

            AdrianGudus:
            When you connect the router to RDS (WAN> PPPoE) in the field "Service Name:" Do not write anything, leave blank. On many routers, if you fill something in that field, you do not make the connection and you alone ... you can set what you want. Do what I said and see if it resolves. Return the result ...  

            Yes I did what you said but equally, no results, I think I'll go to work with him as far as I am concerned me as a customer I think I have exhausted all variantele.Va thank you for your time.

            View Comment
            • AdrianGudus said:

              nicolae:
              Yes I did what you said but equally, no results, I think I'll go to work with him as far as I am concerned me as a customer I think I have exhausted all variantele.Va thank you for your time.

              Can you make a video using THIS service and he shows us how it works you exactly what you do in router settings and what properties of the network card, what settings, etc..

              View Comment
  31. webdan said:

    Many tips and no one says not to give such a good clone MAC.Este said AdiGudus Xantes and even perfect, but if the router MAC 000000000000 forever is not going to work.

    View Comment
  32. nicolae said:

    Here is the tutorial on how I set the router, please tell me if it's good and if I went where have linked to NIC

    View Comment
  33. nicolae said:

    I do not know if I have appeared several posts with the same answer, if so, I apologize but I think I have some problems with the browser because when I go to view my writing I do not post to the address shown on screenr, but only after that post again when I appear as I posted several times the same thing .. sorry

    View Comment
    • AdrianGudus said:

      nicolae: I do not know if I have appeared several posts with the same answer, if so, I apologize but I think I have some problems with the browser because when I go to view my writing I do not post to the address shown on screenr, just barely After you post again when I appear as I posted several times the same thing .. sorry

      Honestly, I do not really understand your problem.
      1. If you connect the router for RDS, it shall not be done in the PC or laptop. You do not have to walk anywhere in the PC settings or laptop once RDS connection (PPPoE) is done in the router (that wizard that you go and talk about it in the video ... when I say "make the connection in router")
      2. In your video, it looks like you created a PPPoE connection in control panel, the network card. Normally, the connection called "RDS" does not belong there, nor in laptop
      3. Do you access the internet through the router or on the desktop or the laptop?
      4. If the PC you have access to the internet using the router (cable connected to the PC and router) on the laptop, you take the cable (that comes from a router LAN port) and put it in the laptop network card, you net?
      Return to the answers.

      View Comment
      • nicolae said:

        AdrianGudus:
        Honestly, I do not really understand your problem.
        1. If you connect the router for RDS, it shall not be done in the PC or laptop. You do not have to walk anywhere in the PC settings or laptop once RDS connection (PPPoE) is done in the router (that wizard that you go and talk about it in the video ... when I say "make the connection in router")
        2. In your video, it looks like you created a PPPoE connection in control panel, the network card. Normally, the connection called "RDS" does not belong there, nor in laptop
        3. Do you access the internet through the router or on the desktop or the laptop?
        4. If the PC you have access to the internet using the router (cable connected to the PC and router) on the laptop, you take the cable (that comes from a router LAN port) and put it in the laptop network card, you net?
        Return to the answers.
          

        In the remaining old pc I had a connection cable, and forgot to delete it, I access the internet through the router that is connected to pc desktop cable internet instead I have a laptop that uses a modem usb.
        Yes, if the bag net cable LAN port of the router in laptop I net.

        View Comment
  34. nicolae said:
  35. dragomir24l said:

    hi cristi, I watched with interest your tutorial and I learned things I liked living abroad and here interesate.Eu Internet operators have installed some routers fairly rudimentary but CAN ditch settings similar but not as rich as the router presented I want to ask you an opinion if i can raspunzi.Eu I live in an apartment with two other girls (China), I contracted 12 fiber optic internet mega and I decided to share with the girls 2 by wi be fine but when it connects both on pages in China who knows what my ping increases more and is especially annoying for playing counter strike, I'd like to ask if there is any way to share Internet bandwidth, each face 2 8 mega mega myself that if possible within the router or if you can not access a router price or even if you know a program unul.A thank you for your time and for tutorials help you do hope to contact me at e mail "[email protected]" ciao

    View Comment
    • AdrianGudus said:

      dragomir24lHi Cristi, I watched with interest your tutorial and I liked the things I learned here interesate.Eu living abroad and internet operators have installed some routers fairly rudimentary but CAN ditch settings similar but not so rich as presented router I'd like to ask you an opinion if i can raspunzi.Eu I live in an apartment with two other girls (China), I contracted 12 fiber optic internet mega and I decided to share with the 2 girls wi be fine but when it connects both on who knows what my ping pages in China grows more and is especially annoying for playing counter strike, I'd like to ask if there is any way to share Internet bandwidth, each 2 to this mega mega and I 8 if possible inside your router or if you can not access a router price or even if you know a program unul.A thank you for your time for tutorials and help you make hope contact me at e mail "[email protected]" ciao

      Explained in the tutorial just as if the router has QoS technology (Quality of Services) can limit the bandwidth on each port as LAN and wireless connections

      View Comment
      • dragomir24l said:

        AdrianGudus: Explained in the tutorial just as if the router has QoS technology (Quality of Services) can limit the bandwidth on each port as LAN and wireless connections

        Hi I followed the tutorial so many times that I know almost by heart but still do not see where you put the limit for wi fi.Am seen in other websites that may be limited by IP and poppy but you do not explain something tutorial, is what I ask you, how to limit it to two laptops wi fi please be more specific if you can, thanks

        View Comment
  36. Thank you, I could not imagine Romtelecom not have Dynamic IP and PPPoE (that makes your Speedtouch).
    Thank you very much.

    View Comment
  37. you can FACIT a tutorial hg655b router please

    View Comment
  38. Monetta said:

    Hello,
    I Dlink DI-524 but the question / answer would be valid for all routers.
    So how can I access the configuration page of the router's own :)) outside LAN's, that the WAN. Router's LAN address in clear, but how can access the router from another computer located somewhere else in geography homeland? What settings should work for this goal?
    Thank you in advance.

    View Comment
    • AdrianGudus said:

      Monetta:
      Hello,
      I Dlink DI-524 but the question / answer would be valid for all routers.
      So how can I access the configuration page of the router's own) outside LAN's, that the WAN. Address in LAN router is clear, but how can I access the router from another computer located somewhere else in geography homeland? What settings should work for this goal?
      Thank you in advance.

      Find a function related to Remote. For example my router I Remote Management port you choose, tick Enable and you're ready.

      View Comment
      • Monetta said:

        AdrianGudus: Dlink DI-524

        It is sometimes not even see your own nose if you do not tell someone like him in the middle of the face
        Thanks, my settings are just that and not until I had seen you said there.

        View Comment
  39. Petre Vişoiu said:

    Acknowledgements for the work, you deserve the best

    View Comment
  40. dragos said:

    I have a question: How can I get to reconfigure the router or enable / dezantivez some function after it has been previously installed. I try to access ip (not one generated by it) but it works. And another thing if I connect to the wireless router as an IP camera to see what the camera is filming real time. Thank you very much.

    View Comment
  41. dragos said:

    Regarding the request above, I expressed correctly. How can I activate some functions of the router from another computer that is connected to the Internet.

    View Comment
  42. polferis said:

    Hello! I want to ask someone who knows, maybe Cristi-admin who made this tutorial. What is it: I have dynamic IP, I set static ip laptop alone, but my connection drops almost daily. The only remedy is to give restart. Maybe a few times a day! You set static ip and router, but I ask isp gateway address that you do not know. How can I find out? I tried so many ways, do not go. Whatever you put isp address: http://cl.ly/3L2t2D32161G1S0a3B0C I say it's invalid;
    http://cl.ly/2O2j0E2K1E3O301S0b2M Send your restarts to get rid of these!
    Please if you can help me! Thank you.

    View Comment
    • Xantes said:

      polferis:
      Hello! I want to ask someone who knows, maybe Cristi-admin who made this tutorial. What is it: I have dynamic IP, I set static ip laptop alone, but my connection drops almost daily. The only remedy is to give restart. Maybe a few times a day! You set static ip and router, but I ask isp gateway address that you do not know. How can I find out? I tried so many ways, do not go. Whatever you put isp address: http://cl.ly/3L2t2D32161G1S0a3B0C I say it's invalid;
      http://cl.ly/2O2j0E2K1E3O301S0b2M Send your restarts to get rid of these!
      Please if you can help me! Thank you.

      When an Internet connection is provided via a router - her again - do not assign a static IP in network card set-countries, the respective computer! It is only that router.

      Set-area that I did not do it, there is only valid when the provider of your Internet connection gives you a fixed IP based Internet! And even so - in your case in which, as I told you and that router will be assigned fixed IP router! So if your internet provider has assigned you a fixed IP, then you must enter it there. If you allocated a fixed IP, under no circumstances enter something there, but do set-aryl for other connectivity almost: Gender PPPoE (with RDS and Romtelecom) or Dynamic IP, PPTP, etc.. If you have Internet UPC certainly have no no no static IP and PPPoE, Dynamic IP but most likely or let the "NONE", ie do not select any option - depending on which menu options you have available in your router it .

      What you need to do is to solely your router to provide a fixed IP, class router, your computer, and this is not done in that menu that you presented yourself in those screen shots sites, but from elsewhere: somewhere where is called "Static DHCP Leases Table ', based NIC's MAC.

      View Comment
      • polferis said:

        Xantes: When an Internet connection is provided via a router - her again - do not assign a static IP in network card set-countries, the respective computer! It is only that router.

        Set-area that I did not do it, there is only valid when the provider of your Internet connection gives you a fixed IP based Internet! And even so - in your case in which, as I told you and that router will be assigned fixed IP router! So if your internet provider has assigned you a fixed IP, then you must enter it there. If you allocated a fixed IP, under no circumstances enter something there, but do set-aryl for other connectivity almost: Gender PPPoE (with RDS and Romtelecom) or Dynamic IP, PPTP, etc.. If you have Internet UPC certainly have no no no static IP and PPPoE, Dynamic IP but most likely or let the "NONE", ie do not select any option - depending on which menu options you have available in your router it .

        What you need to do is to solely your router to provide a fixed IP, class router, your computer, and this is not done in that menu that you presented yourself in those screen shots sites, but from elsewhere: somewhere where is called "Static DHCP Leases Table ', based NIC's MAC.

        Thank Xantes. So what should I do, actually I did not understand? I net from RDS-dir300 DLINK wireless router and not on the menu that Static DHCP Leases Table. The only place it has something to do with where I showed static. Consequently, what? I do not want so many resets daily! Can you help me?

        View Comment
  43. polferis said:

    Hello! I was a subscriber of company was bought by RDS-RCS. I have established direct connection to laptop, following me as I set my router. But if the main cable bag in my router indicates no signal. So I can set the router. No website can not enter, "it` s Taking too long to respond "
    Dlink original cd I know but how do I set him get into it? Can someone help me? Please beautiful!

    View Comment
  44. I have a problem with D-link router DIR615 going non-stop this router but has a little problem after several surfing the day after a few minutes you get on the net I can not join the network shown below with the mark! and only can come say page not found and if the router out and plug bag again and what goes, what setups should be done?

    View Comment
  45. which ports to put or what settings do I no longer give to disconnect from trun MMO .. I have a dlink pls zhelp dir300

    View Comment
    • polferis said:

      Dragos:
      which ports to put or what settings do I no longer give to disconnect from trun MMO .. zhelpam a dlink pls dir300
      You have to do portforwarding in the router with port assigned to the game, check the settings in the game. Enter the router at Advanced section and the gates.

      View Comment
  46. I need help, I have a router dir 655 but I can not make it work or how SharePort - the ... what can I do?

    View Comment
  47. I still managed to connect a USB memory stick with shared port. What I care now: I can do so as to send a ping to the server from the Internet, all mine, and if that server at a time to not receive a reply e-mail? And I want to ask if I can use a hard drive attached to the router via USB as ftp server?

    View Comment
    • bogdangelu said:

      Nelu:
      I still managed to connect a USB memory stick with shared port. What I care now: I can do so as to send a ping to the server from the Internet, all mine, and if that server at a time to not receive a reply e-mail? And I want to ask if I can use a hard drive attached to the router via USB as ftp server?

      Hello.
      You are kind to me (us) know how you managed to connect via the USB port of the router memorie.Multumesc stick and I anticipated the answer.

      View Comment
  48. Hello,

    I got a router DIR-655 I try to connect to the Internet through a USB stik RCS-RDS. For a while trying this and trying to connect all the reusesc.Am 3G from Vodafone and the same rezultat.Ma someone can help with this problem?

    PS.Atat on laptop computer and run Windows XP.

    View Comment
  49. Sal and I have an Asus Wireles router and can not make connection cable wireles.pe go internet .. appears to me that she connected wireles but I do not go internetu.imi shown wireles signal an exclamation mark. I rds Cable connection.

    View Comment
  50. AdrianGudus said:

    Seba:
    Sal and I have an Asus Wireles router and can not make connection cable wireles.pe go internet .. appears to me that she connected wireles but I do not go internetu.imi shown wireles signal an exclamation mark. I rds Cable connection.

    You were not clear.
    What operating system are you using?
    How and what you want to connect to the router wirelessly with your desktop or laptop?
    If you use a desktop and want to have net via wireless router to desktop (PC) PC have a wireless network card or a wireless stick?
    Have you tried to disable the firewall and then see if loading web pages?
    When you hold your mouse over the connection in the system tray near the clock, where you say that exclamation mark appears that your pop-up appears (the message?)

    View Comment
  51. Viorel said:

    Hello! I got all A's router trendnet TEW-432brp only, i have tried to configure RDS network routeru after I followed all the steps in stetarile router to wan ... I show error The DNS server isn t responding ... I seen a tutorial on the net about this problem I entered the Control Panel \ Network and Internet \ Network and Sharing Center-trendnet-proprietati/internet version4 protocol / properties / I changed DNS Automatic lam left as you said and I introduced myself DNS 208.67,222,222. After I did that I have not connected all the other "boil" The windows can-t communicate whit the drivers or resource (primary DNS). I really do not know what to do ...: | I've got a nic DNS folks at Rds ...: | I 625 Hp laptop, using win7 ...

    View Comment
    • polferis said:

      The "default gateway" and "prefered dns server" chicken router address, or 192.168.0.1 192.168.1.1 something. Depends on the router, write in it or are written in a cmd ipconfig / all. I think you made after I see, your external IP, wrong! Put it on the internal 192.168.x.yyy where x is zero or one (see above) and yyy range between 100 249 and depends on the router. The "alternate DNS server" server put Google:
      +34 91 501 47 49
      +34 91 501 47 49

      View Comment
  52. Welcome. I have a D-Link DI-624 +. I tried to get on his settings and it asks user name and password. I tried to stick Admin and password 123456 1234 or blank or admin ... I tried and can not get nothing. I worked with him until yesterday without password. And I thought you now put the password but do not know ... Help me please!

    View Comment
  53. polferis said:

    Mihai:
    Welcome. I have a D-Link DI-624 +. I tried to get on his settings and it asks user name and password. I tried to stick Admin and password 123456 1234 or blank or admin ... I tried and can not get nothing. I worked with him until yesterday without password. And I thought you now put the password but do not know ... Help me please!

    Default login details if you have not changed are-user: admin with "a" small, no password.

    View Comment
  54. Additional ion said:

    hello! I have a dir-600 and I have a problem with yahoo messenger application. I made this router settings for a connection from RDS with dynamic ip. fc problem is that yahoo messenger sign out and then sign in every time. where this occurs? direct cable does not happen so. win8 use pro. waiting for response. will thank

    View Comment
  55. I have a d-link dir-600 and do not know how to get him to give a net RDS stick to other deviceuri.
    Thanks for any suggestion

    View Comment
  56. mihai ionescu said:

    I have a router and want to connect DIR655 Romtelecom. I net them and even HG655b router but I want to check if it works better with the dlink meu.Nu know how to connect different cables physically because I (from Romtelecom and entering in dlink) poare someone help me ?
    thank you in advance

    View Comment
  57. Mihai Ionescu:
    I have a router and want to connect DIR655 laromtelecom. I net them and even HG655b router but I want to check if it works better with the dlink meu.Nu know how to connect different cables physically because I (from Romtelecom and entering in dlink) poare someone help me ?
    thank you in advance

    Dlink connected to Huawei Huawei LAN to WAN in the dlink. In setting Mr. llink must choose dynamic connection type, you can choose and static but you have to put ip, subnet, gateway and dns, all manual. Then you must go. Be sure to be wireless turned on.

    View Comment
    • mihai ionescu said:

      Thanks for the answer, go f.bine after your instructions. I'd like to not use the router from Romtelecom (to connect directly to dir655) can?

      View Comment
  58. adrian said:

    own a d-link and I question: if we 2 leptopuri connected and want to limit the speed of one of them, perhaps? that is the main one to have priority.
    Thank you

    View Comment
  59. Adrian Avram said:

    I have a router DIR Lonki Mr. 653 and have this question: I can set if I have two leptopuri connected, as one of them to have priority?

    View Comment
  60. Hello,
    Please advise me to solve the following problem with a Dlink router DIR-655: when you open your laptop does not recognize my network, but block other wireless networks. Meanwhile, mobile phones can I connect immediately to their own wireless network, which is good.
    How do I recognize my laptop and my wireless network? Mention that no restarts (the router and laptop) and no physical opening and shutting (a router, a laptop and / or Wi-Fi adapter) does not remedy the problem.
    Thanks in advance for your help.

    View Comment
  61. I have a d-link dir635 and I can not configure the ultimate win7 sp1 32bit, my web page appears without login to the router admin and password box. I have a win xp sp3 installed on a USB external HDD that lets me to sign and set the router but I think we are constantly a mistake that does not activate the wifi. I mention that I subscribed rds, and I beseech you learn what to do for me. me crazy that all issue
    especially since the router's new and I gave a lot of money on it. Thank you in advance!

    View Comment
  62. George said:

    Hello,
    I did upgrade from Fiberlink Fiberlink 100 300 from (my HG8240 mounted a Huawei GPON).
    But the Net speed remained the same, because I have an old PC: Intel Pentium 4, 3 Ghz CPU, 3 GB RAM, NVIDIA GeForce 256MB 6600,186 GB Western Digital hard drive, gigabit network card, Win XP Pro SP3 (32bit).
    I do not want net than the PC.
    I would like to know if it would help to get a gigabit router net increase speed and what model would be good. Thank you in advance.

    View Comment
  63. Hello. I have a D-Link router 605l. Modem Internet connection is without login and password, IP StatC. How do I connect to this router?

    View Comment
  64. Hi, I have a d-link615 which engages 1 pc ,,, ,,,,, ,,,,, 2laptopuri 3telefoane.pot phones do not catch the signal from my d-link?

    View Comment
  65. Claudia said:

    Short! DNS server address deals with the transformation of gender http://www.google.ro the IP address, physical address of the site. Merge made any public DNS server, those from Google, as already answered, very good. To work ok should have a larger collection of data, a table exactly. The more extensive and updated, the better.
    DHCP server in the router now handles dynamically assigning addresses within your home network. Usually it (the server) must be activated, has a kind 192.168.x.yyy address or any other class of addresses. In these conditions, IP router connected to your computer to be on "automatically obtain" not fixed. Usually there are options to set (of the stick) an IP to a specific computer (attention, a computer can be more .. NICs, wireless, etc .... each IP's). If an unresponsive DNS put another. If toto does not want the DNS server is not guilty, but do not have WAN connectivity (internet). Attention can be connected in LAN (home network) and once you can access the router page configutate really are, but the WAN (net) not be logged. Last time I checked the router must know PPPoE to connect to RDS. Well, I hope I was not too confusing explanations!

    View Comment

other references

  1. [...] This post WAS mentioned on Twitter by Ady, VIDEOTUTORIAL.RO. VIDEOTUTORIAL.RO Said: Configure router D-Link DIR 655 for Romtelecom, RDS, UPC, internet starter, 3G | Videotutorial.ro http://t.co/WReG0AA [...]

    View Comment
  2. [...] How to make RDS connection and wireless internet settings in a router (RDS) Configuration D-Link DIR router 655 for Romtelecom, RDS, UPC, internet starter, 3G (for other connection types) Do not forget, if you have suggestions, complaints or additions not [...]

    View Comment
  3. [...] Dmz or TP-LINK TL-WR740N, a wireless router super cheap and super good, presentation and configuration settings or router D-Link DIR 655 for Romtelecom, RDS, UPC, internet starter, 3G. If you use only routetul LAN do not need to make too many settings in the router, however [...]

    View Comment

Viewpoint

*