D-Link DIR 655 router configuration for Romtelecom, RDS, UPC, internet starter, 3G - video tutorial

Hi friends, in this tutorial I will present a router from D-Link, it is the model DIR 655, will present everything you can present to a router, even if you have no router from D-Link, you will surely learn many useful things.
The menus for this router resembles drop all routers from D-Link made lately of course probably will stuff more or less but the location and main functions are the same.
D-Link DIR 655 is a router that knows how to do more, you'll be surprised how many useful features this device has: QOS Engine technology that knows how to give priority to certain applications to others eg vs browser. download manager, Wireless N (300 Mbps) Gigabit ports, USB multifunction that we can be a modem stuffing 3G be a storage device (USB stick, external hard) Guest Zone is a second wireless network that a router can create interesting features besides the router D-Link DIR 655 has an enviable stability and long-range coverage, plus it does not require the type of router never reset basically is anti bullet.
I will show almost all functions of the router, I am sure that in the end you will appreciate this router.
Usually people think of a router as a common object, the router is no longer a simple "divider" of the net, a router is like a computer, has its own processor, RAM, flash, operating system ( firmware), if we use a router with a head we will see that we can get some results that we previously expected only from software.
A router can be used: to automatically limit the time spent by someone on the net, to limit access to some Web addresses, manage bandwidth allocated to certain applications, etc. etc.
The router can connect multiple IP cameras, so we can do our own video surveillance system.
A good router used effectively can improve our life, plus a good router knows how to work with all types of connections, settings below have major types of connections.

Set router for Romtelecom:
Choose "Dynamic IP" from the drop down and save.

Set for RDS:
Choose from drop down PPPoE (username / password), check Dynamic IP, enter user and password, in "Reconect Mode" check "Always on", fill in MTU 1492 and save.

Set router for net neighborhood (MAC Authentication):
Choose from the drop down "Static IP", enter ip, dns, subnet etc and then clone the MAC by clicking on "Clone Your pc MAC Address".

Set router for connections that are made through Internet application Starter:
Like the mac romtelecon + cloning, in addition, the application must be turned Starter Internet.
Good luck with that!
TRENDnet router if you can follow this tutorial TRENDnet router port forwarding on
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
Enjoy !

by Cristian Cismaru



Related Tutorials


About Cristian Cismaru

I like everything related to IT&C, I like to share the experience and information I accumulate every day.
Learn as you learn!

Comments

  1. Cristi useful tutorial ms

  2. rosg ft cv and I will play you could help me and me with something?
    I want to launch e vb cv site and can not you be doing?
    miam bought the domain and hosting and goes ... dc? what aces do? please help in soul-ma.dak mss do not bother ... more

    • Adrian admin said

      Daniel: I will rosg cv ft and beautiful you could help me and me with something?
      I want to launch e vb cv site and can not you be doing?
      miam bought the domain and hosting and goes ... dc? what aces do? please help in soul-ma.dak mss do not bother ... more  

      someone like you had to come and post next to the topic… finally…
      Use the search box at the top right of the black border: you writing 1 creating the site, you enter and you will find the tutorial. We have a number of 6 tutorials on this subject, to find episode 2 writing in the search box: website creation from 2, to find episodu 3 writing in the search box: website creation from 3, you enter and so to Episode 6

  3. Interesting tutorial but I don't know if other tutorials like this would be useful, not that they wouldn't be welcome, maybe for some of us but not many because we don't all have money for routers… Or how good the tutorial was! Good luck in the future!

  4. Cristi I have a request to you what phone to get my myself what about LG Optimus One P500 good as I have enough money for htc how you got I wanted to take my htc desire but expensive and no money so I want something somewhat quality but with android, and still something I saw on some phones write a-GPS means but GPS simply know that means gps but do not know how to take them have integrated not integrated a-GPS lamurestema and me. What htc phone that you currently have? And please tell me if it's good P500 LG Optimus One? Wait for response :). Good day Cristi

  5. Super tutorial, I dropped a shame we had Dlink in 635 6 months twice problems connecting to the internet, simply no longer connect to net.Noroc as it was under warranty and I changed Trendnet 634GRU.

  6. If it's not annoying - and it shouldn't be - I'll bring a few additions:
    -if (modem) -you have the Romtelecom router set in "Bridge", then
    follow the set-arils as those for RDS;
    -If you have Internet UPC, then just choose Dynamic IP and
    introduces cloning, network card MAC computer with
    you have registered the UPC network.

    Why did you set your CLicknet router (modem) to "Bridge" mode? For the simple reason that you will not have to open ports (operation known as Port Forwading) both in the (modem) router from Romtelecom, and in your router, purchased by you. By putting the (modem) Rometelcom router in "Bridge", you will open ports only in your router, which will greatly facilitate any other subsequent sets for your LAN.
    Stringing of the second router - as at present - followed by the Romtelecom is called "cascading". Basically a inserirere the two traversing one after another, but a series marking as some might think that the one that is done in an electrical circuit, but a chain of a device after the other.
    WARNING: those who have a router (wireless, as newer, new subscriptions Clicknet it provides) with 4 LAN ports, ie a router that can give Internet 4 computers, wire Ethernet (without taking into calculating a switch!), do not need a second router (wireless or not!), as the one received from Romtelecom can do the same things and the second router used in this tutorial! The second router is only for those who use a router modem cun one Ethernet port and that it will "cascade" of the wireless router you purchased.

    • Xantes: If not with anger - and it would be - make some notes:
      -If (modem) Router software from Romtelecom you have set-at the "Bridge" atunciurmati set-arils as those for RDS;
      -If you have Internet UPC, then just choose Dynamic IP and seintroduce for cloning MAC computer's network card you registered with some network UPC.De you have set the (modem) router the Clicknet in "Bridge"? For the simple reason that it will not need to open ports (known as Port operaratiune Forwading) both (modem) router from Romtelecom and in your router, purchased by you. Putting (modem) router Rometelcom in "Bridge" will only open ports in your router, which will greatly facilitate any subsequent set-ari to your LAN network.
      Stringing of the second router - as at present - followed by the Romtelecom is called "cascading". Basically a inserirere the two traversing one after another, but a series marking as some might think that the one that is done in an electrical circuit, but a chain of a device after the other.
      WARNING: those who have a router (wireless, as newer, new subscriptions Clicknet it provides) with 4 LAN ports, ie a router that can give Internet 4 computers, wire Ethernet (without taking into calculating a switch!), do not need a second router (wireless or not!), as the one received from Romtelecom can do the same things and the second router used in this tutorial! The second router is only for those who use a router modem cun one Ethernet port and that it will "cascade" of the wireless router you purchased.  

      Why upset me even more vivid please with completions.

  7. Speaking of “third party firmware”… this wireless router does NOT SUPPORT firmware from DD-WRT !!! DO NOT try, you will run out of router!

    • Xantes: Speaking of "third party firmware" ... this wireless router does not support firmware from DD-WRT !!! Do not try, you will remain without router!  

      Yes, it is, I said it in tutorial, this router processor still does not support custom firmwares, maybe the future will do something about it.

  8. rootalkin said

    I have a question. Is there any program for Linux SharePort?

  9. I would also come with a supplement for those who - as in the case of this router - has the IP class assigned by the form: "192.168.0.1", to change it to the form, either: "192.168.1.1" or "192.168.2.1". Why and when is this IP class change useful?
    If you have - for various reasons, I am not developing the idea now - you want to share an Internet connection - from another computer, through the wired network card and the built-in wireless, as long as the router has assigned the IP class of "192.168.0.1", the wireless network card of the computer that shares an Internet connection, will also assign IPs of the same class: "192.168.0.1" and you will have a IP conflict!
    For this you need to change the IP class of the router, as described above and so the network card of the computer that shares the Internet connection will be able to assign IPs of class "192.168.0.1" to others computers that will take over the Internet connection on their wireless card.

    • Xantes: I come with a complement for those who - as with router girl - has class IPs allocated as: "192.168.0.1" to change shape, either: "192.168.1.1" or "192.168.2.1" . Why and when is it useful to change the class IPs?
      If you - for various reasons, are not developing their idea - you want to share look an Internet connection - from another computer via the network card wired and wireless embedded as long as the router your class has allocated IPs "192.168.0.1" wireless network card to the computer that shares uieste Internet connection, and it will assign IPs in the same class, "192.168.0.1" and you have a conflict of IP- hate!
      For this need to change class IP router, as described above and thus the network card of the computer that shares uieste Internet connection will be able to assign IPs class "192.168.0.1" and other computers will take over the Internet connection, wireless on their plate.  

      Ok, I'm changing the IP class of the router, but you didn't specify anything about changing the "range" (range) of IPs that the router needs to allocate. In vain I changed the IP class of the router if I didn't change the "range" (range) of IPs that the router has to allocate. Then if I have a router why bother with shared networks, the cost difference between a simple router and a wireless one it's not that big, there's no point in complicating myself with shared wireless networks.

  10. costel08_78 said

    Very good this tutoriel.
    I posted to you my problem, I hope you don't mind me coming back with the same problem but I can't find a solution. I have a router from romtelecom model (Huawei hg 655b) on windows I have no problems loading pages or torrent download works very well. The problem is on linux (ubuntu 10.10) it loads my pages hard although I click net power 30 mg / s VDSL and neither did it download torrents with the default transmission utility ami it works with 30-70 kb / s what eff weak.what settings would you make work well on ubuntu ?? someone told me to make it connect automatically… .how to do something ?? no one has the same prbm as me ?? thank you.

  11. I wish you good Važić as fati a very good job and I think the best would be a tutpril you how to put two windows on the pc-s wait goodbye

  12. I have a huge request, I have a D-Link DIR 600 router and modem speedTouck (USB). I do not know him through this modem connection to the Internet. I do not have network cable that tie me to the router. Can someone help with practical advice?

    • Adrian admin said

      BebeteI have a huge request, I have a D-Link DIR 600 router and modem speedTouck (USB). I do not know him through this modem connection to the Internet. I do not have network cable that tie me to the router. Can someone help with practical advice?  

      Well shown in the tutorial just that: to connect a USB modem to the router, the router must have a USB port. Look at the tutorial without running head-tail that showed how doing this, namely as a USB modem connected to a router with USB port

  13. Adrian admin said

    Bebete, your router has a USB port so you can not connect the modem to the router, at least not your router. one presented by Cristi has a USB port.

  14. sal, while a tutorial on how to download internet speeds if you have Windows 7, thank you for further tutorials and good luck

    • Adrian admin said

      Dony: Sal, while a tutorial on how to download internet speeds if you have Windows 7, thank you for further tutorials and good luck  

      Speed ​​is what gives you a net provider of firm to which you have internet. Want more speed, then you do play a larger subscription. Speed ​​does not go "increased" so as like sirloin everyone ... If you have a pipe thick as you and I dripping 5 drops of water per day that flow through the pipe that as you well 5 drops a day it flow, however thick you could / would you do pipe

      • Adrian admin:
        Speed ​​is what gives you a net provider of firm to which you have internet. Want more speed, then you do play a larger subscription. Speed ​​does not go "increased" so as like sirloin everyone ... If you have a pipe thick as you and I dripping 5 drops of water per day that flow through the pipe that as you well 5 drops a day it flow, however thick you could / would you do pipe  

        hello adrian, well pay for a higher speed k per contract write k I speed 20 mb / s and only download with 200 kb / s and sometimes load and heavy websites and youtube I go hard, are England, was not in romania.cand aksa download and 1 mb / s and here the same torrent site that we might use and aksa fail to have somewhat acceptable download speeds and aploud does not move me at all. I did a speedtest and shows me e k download speed of 5,95mb / s and uploud's 0,49 mb / s.

  15. Hello!

    I have a USB stick queries if 3g RDS (mobile internet). What settings should I do in that category router to use it? Thanks for the tutorial.

    • AlexHi! I have a stick's queries if 3g RDS (mobile internet). What settings should I do in that category router to use it? Thanks for the tutorial.  

      Possibly more watch tutorialStep by step and try by probing with each option in that category. I would also be interested in the option of connecting a USB modem from RDS, but for those who have this type of router, did we think you should be a problem, because they posiblitatea try the options available at our disposal, to In contrast to me, who have this router.

  16. cu_minte said

    Hello and I found! It can connect with a mobile internet stick from ClickNet romtelecom? Thank you for any answers.

  17. I cristi good Romtelecom's net new now and do not know how to have wireless internet on mobile adika 19216801 I tried those numbers and do not find anything you need to do thanks a lot sara

    • Sara: Good Cristi I now romtelecom net from new and do not know how to make the internet I tried mobiladikawirelessam 19216801 and those figures do not find anything you need to do many thanks sara  

      • Sara:
          

        Look at the back of the router (modem + router), you certainly don't have the address "192.168.0.1", the address for Huawei is "192.168.1.1".
        And you be careful / careful another time.

  18. bogdangelu said

    Hello.
    I follow with interest and I have subscribed to email to see new tutorials you faceti.Am 2 months of this router model nor yet we did not sign anything (stick, external HD) USB port, following I saw the tutorial you reach the Setup USB Settings I do not ,, Enable SharePort for setting appears Guest Zone http://img193.imageshack.us/img193/5784/dir655.png .Aveam 1.32 latest firmware and SharePort software downloads have 1.15.Cand did you come to your SharePort year saw a new version appeared to him and to firmware.Le I downloaded both but the same problem, router via USB port SharePort software enabled device does not detect any anticipated atasat.Multumesc

    • bogdangelu:
      Hello.
      I follow with interest and I have subscribed to email to see new tutorials you faceti.Am 2 months of this router model nor yet we did not sign anything (stick, external HD) USB port, following I saw the tutorial you reach the Setup USB Settings I do not ,, Enable SharePort for setting appears Guest Zone http://img193.imageshack.us/img193/5784/dir655.png .Aveam 1.32 latest firmware and SharePort software downloads have 1.15.Cand did you come to your SharePort year saw a new version appeared to him and to firmware.Le I downloaded both but the same problem, router via USB port SharePort software enabled device does not detect any anticipated atasat.Multumesc

      bogdangelu:
      Hello.
      I follow with interest and I have subscribed to email to see new tutorials you faceti.Am 2 months of this router model nor yet we did not sign anything (stick, external HD) USB port, following I saw the tutorial you reach the Setup USB Settings I do not ,, Enable SharePort for setting appears Guest Zone http://img193.imageshack.us/img193/5784/dir655.png .Aveam 1.32 latest firmware and SharePort software downloads have 1.15.Cand did you come to your SharePort year saw a new version appeared to him and to firmware.Le I downloaded both but the same problem, router via USB port SharePort software enabled device does not detect any anticipated atasat.Multumesc

      I also bought this router for about a month. No USB device detects my shareport either. I also bought it thanks to the video tutorial here. I installed on windows xp on two computers and… the same behavior. the firmware of the router is now 2.00 and from the ftp from dlink I took the last shareport

  19. Hello, I have a D-Link router but another model (DL-524) settings do as I do, but I do not know how to have a net present montat.In UPC, and they gave me a ie a cable modem comes in a cable modem then goes to one PC and the phone, but the thing is I do not know if going to mount it.

    • AugustinHi, I have a D-Link router but another model (DL-524) settings do as I do, but I do not know how to have a net present montat.In UPC, and they gave me ie a cable modem comes in a cable modem then goes to one PC and the phone, but the thing is I do not know if going to mount it.  

      If you had the patience - to read at least those comments from which YOU CAN REALLY find out - you would not have come up with such a question.
      I left a comment immediately after the occurrence of this videotutorial you bring as a supplement details for virtually all cases of Internet connections.
      Therefore, for those who have Internet UPC, a router is cascadeaza (that connects one to the other, or one after the other, as you do not!), As follows:
      -Using the same cable coming out of the UPC converter, instead of introducing it into the computer, you will enter into the hole in which the right write either the Internet or WAN, the router. 4 of one of the holes which, in the vast majority of their write LAN router, you'll come to another cable, with one end inserted into the router and the other computer.

      CAREFUL! for set-area in router: the UPC sparing MAC network card to the computer with which you've already signed, first to the Internet and must therefore be that set-arils router to clone MAC board network, by entering that MAC (an array, numeric digits and letters) in the box required in router.

  20. I got a D-link router dir 300, I managed to set it up, download the go-5 7 mb / sec, but the upload goes up 0,3mb / sec from 5 mb / sec as I go without router .

  21. they put firmware on a D-Link wireless 635 nice thank you

  22. Hello,

    I have a bigger problem sucks, I could not give him head DDE.
    I net from Romtelecom, namely click-net, and gave me a Huawei modem mt882 later I bought my wireles router, and can not put the plug in ADSL modem directly enter wireles.cum can wireles router do? wireles router is TP-LINK TL-WR740n

    • AdrianGudus said

      IsaacHi, I have a bigger problem sucks, I could not give him head DDE.
      I net from Romtelecom, namely click-net, and gave me a Huawei modem mt882 later I bought my wireles router, and can not put the plug in ADSL modem directly enter wireles.cum can wireles router do? wireles router is TP-LINK TL-WR740n  

      you can't do this… leave the RJ 11 telephone socket in the modem and exit the modem with the RJ 45 socket and connect in WAN to the Router and from the router you leave and with a cable that has an RJ 45 socket at each end in the PC, the latter cable, plug it with one end into the LAN Router and the other end into the PC, then you will have to make some settings in the router as shown in the video tutorial above.

  23. Very interesting tutorial, I'm going to get myself a dir-600, because the 80 square meters is how my apartment I need 3 antennas.

  24. View Product said

    Mr. Cristi, I have have a question about this model DIR-655.
    I bought a DIR-600 dlink for some time and noticed that the messenger has certain "anomalies". What do they consist of:

    If I have an open torrent client (utorrent, vuze etc) or a Strong DC ++ program, then instant messenger programs suffer. That is, when I type something and give enter or "send", the reply arrives late to the other person (or it may not arrive at all). The same happens when the other person writes something to me (the lines arrive 5… .10 minutes late). The messenger also disconnects frequently and reconnects again.

    Problems like this occur even if you use another client to connect to Yahoo (Digsby or Pidgin). Using my pidgin I connected and Google Talk. The same symptoms appear here.

    I sat on the head of the router for a few days… I tried several things including:
    -Reset
    QoS-activation and customization
    Port forwarding (DMZ for that computer to make sure that I have no problem with opening ports)
    -Update firmware

    No results… Ultimately I replaced the dlink firmware with a custom firmware from dd-wrt.com. There are no more problems now.

    Question: The D-Link DIR 655 shows the same abnormalities as the model D-link DIR 600? Have you ever encounter such problems on this model router?

  25. F. Good tutorial, bravo!
    I don't really have them with these wireless security settings so I have a problem connecting my smartphone to the DIR-655 router I just installed. I set it exactly as in the tutorial (WPA2 with AES), I defined a preshared key of 63 characters (with all kinds of characters: @ # $ '”{} [] \ _ + -, etc). On the phone I find the router with the SSID defined by me and it says under it 'Secured with WPA / WPA2 PSK' but when I want to connect I don't know what password to put. Apart from the pre-shared key, I did not define any password in the router configuration. I entered on the phone, the pre-shared key as the password but it did not connect, moreover, then it appeared written 'Disabled' under my access point.
    Someone can enlighten me what to do?
    Thank you!

  26. I solved the problem. I ran the setup wizard wireless router and left to generate the key. I put the same key in smartphone and went. Thanks anyway

  27. Hi Adrian I also have a problem I have 2 pc. and wants to connect them both on the net I have a romtelecom router hghttp: //www.huaweidevice.com/worldwide/productInfo.do? pinfoId = 2215 & directoryId = 2663 & treeId = 663 and net with rds the problem is that I connect to the net with old computer and this again doesn't work the way I do the settings, I tried to do what u do in the tutorial but it doesn't work, it doesn't work and I don't have that one on the router in his book how to proceed Thanks!

  28. Hello,

    I have a dir-600 router and can not access the page. A few days ago I had problems with netul and I called in the RDS, I do not know what they did, but now works on direct netul and the router.

    I gave reset, and tried to configure it with cd, follow the steps and when the wire net bag and give my next says it can not find the router.

    Thank you

    • FlorinHi, I have a dir-600 router and can not access the page. A few days ago I had problems with netul and I called in the RDS, I do not know what they did, but now works on direct netul and gave nu.Am reset the router, and I tried to configure with cd, follow the steps and when the wire net bag and give next it says it can not find the router.
      Thank you  

      Cable to the WAN jack RDS(Or Internet) and another Ethernet cable inserts into the router, in one of the LAN jacks (4 are the same) and the other end of the end inserts into the network card (wired) computer. Then follow the steps below:

      If you want to be able to EVER set your router in a browser on the router's configuration IP - which as far as I can remember is 192.168.2.1 - enter your username and password assigned from the factory and go to the configuration, by setting up the PPPoE connection and enter the username and password assigned by RDS in your Internet contract.

      If all else fails you can go into the setup menu it, you'll need a crossover cable and a few other set-air the network card of the computer.
      But first leave here a message with the details and I will return to what you have to do in case you can not with those given above.

      FlorinHi, I have a dir-600 router and can not access the page. A few days ago I had problems with netul and I called in the RDS, I do not know what they did, but now works on direct netul and gave nu.Am reset the router, and I tried to configure with cd, follow the steps and when the wire net bag and give next it says it can not find the router.
      Thank you  

  29. Hi, I have a DLINK router 635 that fail to pair mobile devices (PDA, mobile phone with android Samsung) PC and laptop go perfect.Un a tip? thank

    • adrianHi, I have a DLINK router 635 that fail to pair mobile devices (PDA, mobile phone with android Samsung) PC and laptop go perfect.Un a tip? Thank  

      If you have these filtering router set-ate the wires connected computers and wireless:

      -At least WPA2
      -Filtering MAC
      then at least one of these reasons make impsobila, wireless connection with them. In the sense that many phones does not support WPA2 security protocol. Some only supports WEP, WPA and some maximum. On the one hand, on the other, there's no point to have MAC filtering (which is somewhat difficult to do) for your Android phone and PDA that.

      In the above case, if this is the reason why you cannot connect them, then there is a solution, only if your router has the possibility of "multi SSD". This means that you will be able to assign a separate connection - wireless (with another SSID) - with DIFFERENT security (ie you can set it with WEP or WPA) compared to the other wireless that you have filtered with WPA2.

      • Xantes:
        If you have these filtering router set-ate the wires connected computers and wireless:-At least WPA2
        -Filtering MAC
        then at least one of these reasons make impsobila, wireless connection with them. In the sense that many phones does not support WPA2 security protocol. Some only supports WEP, WPA and some maximum. On the aside, on the other, there's no point to have MAC filtering (which is somewhat difficult to do) for your Android phone and that PDA.In above case, if this is why you can not connect, then there is a solution only if your router has the option "multi SSD". This means that you can assign a separate connection - wireless (with another SSID) - to secure various types (ie, it can set the WEP or WPA) wireless to each other that you WPA2 filter.  

        Thanks for the reply
        I had a DLINK 524 before that worked perfectly just do not have great coverage. connect all devices perfect.La model 635 mobile devices (PDA MIO I560 550 and Samsung) have internet traffic although I see sees reteaua.PC network and access to the MAC filte internet.Nu I have updated Firmware Version: 2.34EU with version B3.Toate devices support WPA \ WPA2

  30. welcome.
    If you can help me in a problem with a router tp link tl wr 740 n.Deci I installed the firmware upgrade I did a week I had no problems with it but for once he failed, although the router and the laptop goes with me shows me connected to it is connected to the net but can not access netul.Am system and log into the router and as I say there are not probleme.Am tried a modem USB rds idea that I fell in network card, but it works without any problem.
    Thank you in advance.

    • Xantes said

      nicolae: Welcome.
      If you can help me in a problem with a router tp link tl wr 740 n.Deci I installed the firmware upgrade I did a week I had no problems with it but for once he failed, although as routerulmerge and laptop that I connect to it shows me that it is connected to the net but can not access the system netul.Am and log into the router and as I say there are not probleme.Am tried a USB modem rds from the idea that I fell NIC, but it goes without any problem.
      Thank you in advance.  

      Connecting a USB modem mobile Internet connection - regardless of service provider, does not prove anything at all your motherboard dysfunction wired network, or the computer! In other words, wired network card on that computer is most likely still work, but to convince you, right or wrong I take your laptop and go to a friend and connect to an Internet connection, cable Ethernet.
      A USB modem not realize Internet connection using the wired network card to the host computer, but the USB modem is included in, or emulation which makes software that comes with USB modem!

      As a solution to your problem - from what you say this does not appear - re-set your router through the specific re-set button, usually located behind the souter and start over with the router settings- because, apparently, you do something but you don't do completely well, until the end. On the other hand, what you didn't mention is also mentioning your home Internet provider so we can figure out where you are making - if you make - certain mistakes.

      • nicolae said

        Xantes:
        Connecting a USB modem mobile Internet connection - regardless of service provider, does not prove anything at all your motherboard dysfunction wired network, or the computer! In other words, wired network card on that computer is most likely still work, but to convince you, right or wrong I take your laptop and go to a friend and connect to an Internet connection, cable Ethernet.
        A USB modem not realize Internet connection using the wired network card to the host computer, but the USB modem is included in, or emulation which makes software that comes with USB modem! That the solution to your problem - from what you say it does not appear - enter it re-set your router through specific re-set button, usually located behind Souter and take it through to set-aryl router, because apparently do something but do not completely well until the end. On the other hand, what you have not mentioned, mentioning also is providing Internet from your home so we can figure out about where you - if you - some mistakes.  

        First, thanks for reply, so about what you said, I connected the laptop to an ethernet cable and go smoothly, I reset the router and reset button but with no effect, so I did and I reinstalled the software but degeaba.Furnizorul is RDS and Internet connection type is PPPoE, and frankly if you do not know where I was wrong after I installed it first went a week without problems, another thing I've done with the idea that maybe a USB modem is faulty and that I changer with a new modem, but still nothing.

        Xantes:
        Connecting a USB modem mobile Internet connection - regardless of service provider, does not prove anything at all your motherboard dysfunction wired network, or the computer! In other words, wired network card on that computer is most likely still work, but to convince you, right or wrong I take your laptop and go to a friend and connect to an Internet connection, cable Ethernet.
        A USB modem not realize Internet connection using the wired network card to the host computer, but the USB modem is included in, or emulation which makes software that comes with USB modem! That the solution to your problem - from what you say it does not appear - enter it re-set your router through specific re-set button, usually located behind Souter and take it through to set-aryl router, because apparently do something but do not completely well until the end. On the other hand, what you have not mentioned, mentioning also is providing Internet from your home so we can figure out about where you - if you - some mistakes.  

        • AdrianGudus said

          nicolae:
          First, thanks for reply, so about what you said, I connected the laptop to an ethernet cable and go smoothly, I reset the router and reset button but with no effect, so I did and I reinstalled the software but degeaba.Furnizorul is RDS and Internet connection type is PPPoE, and frankly if you do not know where I was wrong after I installed it first went a week without problems, another thing I've done with the idea that maybe a USB modem is faulty and that I changer with a new modem, but still nothing.
            

          When connecting to the router for RDS (WAN> PPPoE), do not write anything in the "Service Name:" field, leave blank. On many routers, if you complete something in that field, it does not make your connection and peace… you can set what you want. Do what I told you and see if it works. Come back with the result…

          • nicolae said

            AdrianGudus:
            When connecting to the router for RDS (WAN> PPPoE), do not write anything in the "Service Name:" field, leave blank. On many routers, if you complete something in that field, it does not make your connection and peace… you can set what you want. Do what I told you and see if it works. Come back with the result…  

            Yes I did what you said but equally, no results, I think I'll go to work with him as far as I am concerned me as a customer I think I have exhausted all variantele.Va thank you for your time.

          • AdrianGudus said

            nicolae:
            Yes I did what you said but equally, no results, I think I'll go to work with him as far as I am concerned me as a customer I think I have exhausted all variantele.Va thank you for your time.  

            Can you make a video using THIS service and he shows us how it works you exactly what you do in router settings and what properties of the network card, what settings, etc..

  31. Lots of tips and no one says to give him the MAC clone. It's fine as Xantes and AdiGudus said, really perfect, but if the MAC on the router is 000000000000 billion it won't work forever.

  32. nicolae said

    Here is the tutorial on how I set the router, please tell me if it's good and if I went where have linked to NIC

  33. nicolae said

    I do not know if I have appeared several posts with the same answer, if so, I apologize but I think I have some problems with the browser because when I go to view my writing I do not post to the address shown on screenr, but only after that post again when I appear as I posted several times the same thing .. sorry

    • AdrianGudus said

      nicolae: I do not know if I have appeared several posts with the same answer, if so, I apologize but I think I have some problems with the browser because when I go to view my writing I do not post to the address shown on screenr, just barely After you post again when I appear as I posted several times the same thing .. sorry  

      Honestly, I do not really understand your problem.
      1. If you connect the router for RDS, it shall not be done in the PC or laptop. You do not have to walk anywhere in the PC settings or laptop once RDS connection (PPPoE) is done in the router (that wizard that you go and talk about it in the video ... when I say "make the connection in router")
      2. In your video, it looks like you created a PPPoE connection in control panel, the network card. Normally, the connection called "RDS" does not belong there, nor in laptop
      3. Do you access the internet through the router or on the desktop or the laptop?
      4. If the PC you have access to the internet using the router (cable connected to the PC and router) on the laptop, you take the cable (that comes from a router LAN port) and put it in the laptop network card, you net?
      Return to the answers.

      • nicolae said

        AdrianGudus:
        Honestly, I do not really understand your problem.
        1. If you connect the router for RDS, it shall not be done in the PC or laptop. You do not have to walk anywhere in the PC settings or laptop once RDS connection (PPPoE) is done in the router (that wizard that you go and talk about it in the video ... when I say "make the connection in router")
        2. In your video, it looks like you created a PPPoE connection in control panel, the network card. Normally, the connection called "RDS" does not belong there, nor in laptop
        3. Do you access the internet through the router or on the desktop or the laptop?
        4. If the PC you have access to the internet using the router (cable connected to the PC and router) on the laptop, you take the cable (that comes from a router LAN port) and put it in the laptop network card, you net?
        Return to the answers.
          

        In the remaining old pc I had a connection cable, and forgot to delete it, I access the internet through the router that is connected to pc desktop cable internet instead I have a laptop that uses a modem usb.
        Yes, if the bag net cable LAN port of the router in laptop I net.

  34. nicolae said

  35. dragomir24l said

    hello cristi, I watched your tutorial with interest and I liked it I learned interesting things. I live abroad and here the internet operators have mounted some pretty rudimentary routers but the settings are similar but not as rich as the router presented, I would like to ask you for an opinion if you can answer me. I live in an apartment with two other girls (China), I contracted internet through 12 mega fiber optics and I decided to share with the 2 girls by wi fi everything is fine but when you connect both on who knows what pages in China my ping grows a lot and it is annoying especially to play counter strike, I would like to ask you if there is any way to share the internet band, each girl 2 mega and I 8 mega this if it is possible from inside the router or if it is not possible with an affordable router or even with a program if you know any one. Thank you for the time given to the tutorials you do and for help I hope to contact me at email “[email protected]". Ciao

    • AdrianGudus said

      dragomir24lHi Cristi, I watched with interest your tutorial and I liked the things I learned here interesate.Eu living abroad and internet operators have installed some routers fairly rudimentary but CAN ditch settings similar but not so rich as presented router I'd like to ask you an opinion if i can raspunzi.Eu I live in an apartment with two other girls (China), I contracted 12 fiber optic internet mega and I decided to share with the 2 girls wi be fine but when it connects both on who knows what my ping pages in China grows more and is especially annoying for playing counter strike, I'd like to ask if there is any way to share Internet bandwidth, each 2 to this mega mega and I 8 if possible inside your router or if you can not access a router price or even if you know a program unul.A thank you for your time for tutorials and help you make hope contact me at e mail "[email protected]". Ciao  

      Explained in the tutorial just as if the router has QoS technology (Quality of Services) can limit the bandwidth on each port as LAN and wireless connections

      • dragomir24l said

        AdrianGudus: Explained in the tutorial just as if the router has QoS technology (Quality of Services) can limit the bandwidth on each port as LAN and wireless connections

        Hi I followed the tutorial so many times that I know almost by heart but still do not see where you put the limit for wi fi.Am seen in other websites that may be limited by IP and poppy but you do not explain something tutorial, is what I ask you, how to limit it to two laptops wi fi please be more specific if you can, thanks

  36. Thank you, I could not imagine Romtelecom not have Dynamic IP and PPPoE (that makes your Speedtouch).
    Thank you very much.

  37. you can FACIT a tutorial hg655b router please

  38. Monetta said

    Hello,
    I Dlink DI-524 but the question / answer would be valid for all routers.
    So how can I access the configuration page of the router's own :)) outside LAN's, that the WAN. Router's LAN address in clear, but how can access the router from another computer located somewhere else in geography homeland? What settings should work for this goal?
    Thank you in advance.

    • AdrianGudus said

      Monetta:
      Hello,
      I Dlink DI-524 but the question / answer would be valid for all routers.
      So how can I access the configuration page of the router's own) outside LAN's, that the WAN. Address in LAN router is clear, but how can I access the router from another computer located somewhere else in geography homeland? What settings should work for this goal?
      Thank you in advance.

      Find a function related to Remote. For example my router I Remote Management port you choose, tick Enable and you're ready.

      • Monetta said

        AdrianGudus: Dlink DI-524

        It is sometimes not even see your own nose if you do not tell someone like him in the middle of the face
        Thanks, my settings are just that and not until I had seen you said there.

  39. Petre Vişoiu said

    Acknowledgements for the work, you deserve the best

  40. I have a question: How can I get to reconfigure the router or enable / dezantivez some function after it has been previously installed. I try to access ip (not one generated by it) but it works. And another thing if I connect to the wireless router as an IP camera to see what the camera is filming real time. Thank you very much.

  41. Regarding the request above, I expressed correctly. How can I activate some functions of the router from another computer that is connected to the Internet.

  42. polferis said

    Hello! I want to ask someone who knows, maybe Cristi-admin who made this tutorial. What is it: I have dynamic IP, I set static ip laptop alone, but my connection drops almost daily. The only remedy is to give restart. Maybe a few times a day! You set static ip and router, but I ask isp gateway address that you do not know. How can I find out? I tried so many ways, do not go. Whatever you put isp address: http://cl.ly/3L2t2D32161G1S0a3B0C I say it's invalid;
    http://cl.ly/2O2j0E2K1E3O301S0b2M Send your restarts to get rid of these!
    Please if you can help me! Thank you.

    • Xantes said

      polferis:
      Hello! I want to ask someone who knows, maybe Cristi-admin who made this tutorial. What is it: I have dynamic IP, I set static ip laptop alone, but my connection drops almost daily. The only remedy is to give restart. Maybe a few times a day! You set static ip and router, but I ask isp gateway address that you do not know. How can I find out? I tried so many ways, do not go. Whatever you put isp address: http://cl.ly/3L2t2D32161G1S0a3B0C I say it's invalid;
      http://cl.ly/2O2j0E2K1E3O301S0b2M Send your restarts to get rid of these!
      Please if you can help me! Thank you.

      When an Internet connection is provided via a router - her again - do not assign a static IP in network card set-countries, the respective computer! It is only that router.

      Set-area that I did not do it, there is only valid when the provider of your Internet connection gives you a fixed IP based Internet! And even so - in your case in which, as I told you and that router will be assigned fixed IP router! So if your internet provider has assigned you a fixed IP, then you must enter it there. If you allocated a fixed IP, under no circumstances enter something there, but do set-aryl for other connectivity almost: Gender PPPoE (with RDS and Romtelecom) or Dynamic IP, PPTP, etc.. If you have Internet UPC certainly have no no no static IP and PPPoE, Dynamic IP but most likely or let the "NONE", ie do not select any option - depending on which menu options you have available in your router it .

      What you need to do is to solely your router to provide a fixed IP, class router, your computer, and this is not done in that menu that you presented yourself in those screen shots sites, but from elsewhere: somewhere where is called "Static DHCP Leases Table ', based NIC's MAC.

      • polferis said

        Xantes: When an Internet connection is provided via a router - her again - do not assign a static IP in network card set-countries, the respective computer! It is only that router.

        Set-area that I did not do it, there is only valid when the provider of your Internet connection gives you a fixed IP based Internet! And even so - in your case in which, as I told you and that router will be assigned fixed IP router! So if your internet provider has assigned you a fixed IP, then you must enter it there. If you allocated a fixed IP, under no circumstances enter something there, but do set-aryl for other connectivity almost: Gender PPPoE (with RDS and Romtelecom) or Dynamic IP, PPTP, etc.. If you have Internet UPC certainly have no no no static IP and PPPoE, Dynamic IP but most likely or let the "NONE", ie do not select any option - depending on which menu options you have available in your router it .

        What you need to do is to solely your router to provide a fixed IP, class router, your computer, and this is not done in that menu that you presented yourself in those screen shots sites, but from elsewhere: somewhere where is called "Static DHCP Leases Table ', based NIC's MAC.

        Thank Xantes. So what should I do, actually I did not understand? I net from RDS-dir300 DLINK wireless router and not on the menu that Static DHCP Leases Table. The only place it has something to do with where I showed static. Consequently, what? I do not want so many resets daily! Can you help me?

        • Xantes said

          polferis: Thank you, Xantes. So what should I do, actually I did not understand? I net from RDS-dir300 DLINK wireless router and not on the menu that Static DHCP Leases Table. The only place it has something to do with where I showed static. Consequently, what? I do not want so many resets daily! Can you help me?

          First thing in set-aryl your network card, of your laptop, let DHCP assign its own IP: in XP, from "Control Panel"> "Network Connections"> right click on "Local Area Connections"> "Properties", double click on Internet Protocol (TCP / IP) ”, check“ Obtain an IP address automatically ”, then click on“ OK ”and again on“ OK ”.

          From the "Setup" tab of the router menu press the button below "Manual Configure" and under "Internet Connection Type" select PPPoE from the list next to "My Internet Connection is".
          Below you can easily enter the name and password received from RDS. ATTENTION: at “Service name”, DO NOT INTRODUCE, UNDER ANY FORM, something… leave free! Then, click "Save Settings" above, otherwise your settings will not be saved.

          In order to set your laptop a static, permanent IP - but only as long as it is connected to your router, so when you connect it to someone else, it will not square that static IP - yes click, on the left, on “Network Settings”, where, under “50 - DHCP Reservations List” you enter “Computer name” = computer name, “IP address” = the IP you want the computer to have yours: the last three digits, for example: "12", then click again on "Save Settings", above, under "Network Settings".
          If you need more details: [email protected]

  43. polferis said

    Hello! The company I subscribed to was bought by RDS-RCS. They established the connection directly to my laptop, and I will set up my router. But if I put the main cable in the router it indicates the lack of signal. So I can't set up the router. I can't even enter the web page: "it`s taking too long to respond"
    Dlink original cd I know but how do I set him get into it? Can someone help me? Please beautiful!

  44. I have a problem with D-link router DIR615 going non-stop this router but has a little problem after several surfing the day after a few minutes you get on the net I can not join the network shown below with the mark! and only can come say page not found and if the router out and plug bag again and what goes, what setups should be done?

  45. which ports to put or what settings do I no longer give to disconnect from trun MMO .. I have a dlink pls zhelp dir300

    • Dragos:
      which ports to put or what settings do I no longer give to disconnect from trun MMO .. zhelpam a dlink pls dir300
      You have to do portforwarding in the router with port assigned to the game, check the settings in the game. Enter the router at Advanced section and the gates.

  46. I need help, I have a 655 dir router but I can't make it work like the shareport… what can I do?

  47. I still managed to connect a USB memory stick with shared port. What I care now: I can do so as to send a ping to the server from the Internet, all mine, and if that server at a time to not receive a reply e-mail? And I want to ask if I can use a hard drive attached to the router via USB as ftp server?

    • bogdangelu said

      Nelu:
      I still managed to connect a USB memory stick with shared port. What I care now: I can do so as to send a ping to the server from the Internet, all mine, and if that server at a time to not receive a reply e-mail? And I want to ask if I can use a hard drive attached to the router via USB as ftp server?

      Hello.
      You are kind to me (us) know how you managed to connect via the USB port of the router memorie.Multumesc stick and I anticipated the answer.

  48. Hello,

    I got a router DIR-655 I try to connect to the Internet through a USB stik RCS-RDS. For a while trying this and trying to connect all the reusesc.Am 3G from Vodafone and the same rezultat.Ma someone can help with this problem?

    PS.Atat on laptop computer and run Windows XP.

  49. Sal and I have an Asus Wireles router and can not make connection cable wireles.pe go internet .. appears to me that she connected wireles but I do not go internetu.imi shown wireles signal an exclamation mark. I rds Cable connection.

  50. AdrianGudus said

    Seba:
    Sal and I have an Asus Wireles router and can not make connection cable wireles.pe go internet .. appears to me that she connected wireles but I do not go internetu.imi shown wireles signal an exclamation mark. I rds Cable connection.

    You were not clear.
    What operating system are you using?
    How and what you want to connect to the router wirelessly with your desktop or laptop?
    If you use a desktop and want to have net via wireless router to desktop (PC) PC have a wireless network card or a wireless stick?
    Have you tried to disable the firewall and then see if loading web pages?
    When you hold your mouse over the connection in the system tray near the clock, where you say that exclamation mark appears that your pop-up appears (the message?)

  51. Viorel said

    Hello! I also have a trendnet router, it's just Tew-432brp, I have an Rds network, I tried to configure the router, after I followed all the steps in the router states, at wan… It shows me the error The Dns server isn-t responding… I I saw a tutorial on the net related to this problem I entered the Control Panel \ Network and Internet \ Network and Sharing Center-trendnet-properties / internet protocol version4 / properties / I changed Dns I didn't leave it automatic as you said and I introduced a dns 208.67,222,222. After I did that I still didn't connect another "bug" The windows can't communicate whit the drivice or resource (primary Dns). I really don't know what to do,…: | I did not receive any Dns from Rds…: | I have a Hp 625 laptop, I use win7

    • polferis said

      At "default gateway" and "prefered dns server" put the router address, something like 192.168.0.1 or 192.168.1.1. It depends on the router, write to it or find yourself typing in an ipconfig / all cmd. I think you put, as far as I can see, your external IP, wrong! Put the internal 192.168.x.yyy, where x is zero or one (see above), and yyy is between 100 and 249, depending on the router. At "alternate dns server" put the Google server:
      8 8 8 8
      8 8 4 4

  52. Welcome. I have a D-Link DI-624 +. I tried to get on his settings and it asks user name and password. I tried to stick Admin and password 123456 1234 or blank or admin ... I tried and can not get nothing. I worked with him until yesterday without password. And I thought you now put the password but do not know ... Help me please!

  53. polferis said

    Mihai:
    Welcome. I have a D-Link DI-624 +. I tried to get on his settings and it asks user name and password. I tried to stick Admin and password 123456 1234 or blank or admin ... I tried and can not get nothing. I worked with him until yesterday without password. And I thought you now put the password but do not know ... Help me please!

    The default login data, if you have not changed them, are user-admin: admin with a small "a" and no password.

  54. Additional ion said

    hello! I have a dir-600 and I have a problem with yahoo messenger application. I made this router settings for a connection from RDS with dynamic ip. fc problem is that yahoo messenger sign out and then sign in every time. where this occurs? direct cable does not happen so. win8 use pro. waiting for response. will thank

  55. I have a d-link dir-600 and do not know how to get him to give a net RDS stick to other deviceuri.
    Thanks for any suggestion

  56. mihai ionescu said

    I have a router and want to connect DIR655 Romtelecom. I net them and even HG655b router but I want to check if it works better with the dlink meu.Nu know how to connect different cables physically because I (from Romtelecom and entering in dlink) poare someone help me ?
    thank you in advance

  57. mihai ionescu:
    I have a router and want to connect DIR655 laromtelecom. I net them and even HG655b router but I want to check if it works better with the dlink meu.Nu know how to connect different cables physically because I (from Romtelecom and entering in dlink) poare someone help me ?
    thank you in advance

    Dlink connected to Huawei Huawei LAN to WAN in the dlink. In setting Mr. llink must choose dynamic connection type, you can choose and static but you have to put ip, subnet, gateway and dns, all manual. Then you must go. Be sure to be wireless turned on.

    • mihai ionescu said

      Thanks for the answer, go f.bine after your instructions. I'd like to not use the router from Romtelecom (to connect directly to dir655) can?

  58. adrian said

    own a d-link and I question: if we 2 leptopuri connected and want to limit the speed of one of them, perhaps? that is the main one to have priority.
    Thank you

  59. Adrian Avram said

    I have a router DIR Lonki Mr. 653 and have this question: I can set if I have two leptopuri connected, as one of them to have priority?

  60. Hello,
    Please advise me to solve the following problem with a Dlink router DIR-655: when you open your laptop does not recognize my network, but block other wireless networks. Meanwhile, mobile phones can I connect immediately to their own wireless network, which is good.
    How do I recognize my laptop and my wireless network? Mention that no restarts (the router and laptop) and no physical opening and shutting (a router, a laptop and / or Wi-Fi adapter) does not remedy the problem.
    Thanks in advance for your help.

  61. I have a d-link dir635 and I can not configure the ultimate win7 sp1 32bit, my web page appears without login to the router admin and password box. I have a win xp sp3 installed on a USB external HDD that lets me to sign and set the router but I think we are constantly a mistake that does not activate the wifi. I mention that I subscribed rds, and I beseech you learn what to do for me. me crazy that all issue
    especially since the router's new and I gave a lot of money on it. Thank you in advance!

  62. George said

    Hello,
    I did upgrade from Fiberlink Fiberlink 100 300 from (my HG8240 mounted a Huawei GPON).
    But the Net speed remained the same, because I have an old PC: Intel Pentium 4, 3 Ghz CPU, 3 GB RAM, NVIDIA GeForce 256MB 6600,186 GB Western Digital hard drive, gigabit network card, Win XP Pro SP3 (32bit).
    I do not want net than the PC.
    I would like to know if it would help to get a gigabit router net increase speed and what model would be good. Thank you in advance.

  63. Hello. I have a D-Link router 605l. Modem Internet connection is without login and password, IP StatC. How do I connect to this router?

  64. Hi, I have a d-link615 which engages 1 pc ,,, ,,,,, ,,,,, 2laptopuri 3telefoane.pot phones do not catch the signal from my d-link?

  65. Golden said

    I have a problem with the configuration interface of the router! D-Link DIR-300
    After I get the link http://192.168.0.1 and appears menu window and must enter username and password (I put admin and password I left the box blank), I show that I have entered the correct password, I did reset and still shows me that I have the correct password I tried a password "0000" or 123456, nothing! Did you have this problem? or how to keep trying. (Internet e UPC), the problem is they can not enter the setup menu because it asks for a password! the router got from someone not new.

  66. Claudia said

    Short! DNS server address deals with the transformation of gender http://www.google.ro the IP address, physical address of the site. Merge made any public DNS server, those from Google, as already answered, very good. To work ok should have a larger collection of data, a table exactly. The more extensive and updated, the better.
    The DHCP server present in the router handles the dynamic assignment of the addresses inside the home network. Usually this (server) must be activated, it has an address like 192.168.x.yyy or possibly from another class of addresses. Under these conditions, the IP of the computer connected to the router must be "automatic" and not fixed. Usually there are options to fix (paste) an IP of a certain computer (attention, in a computer there can be several network cards..wire, wireless, etc.… .each with its IP). If one DNS does not respond, put another. If toto doesn't want it, the DNS server isn't to blame, but you don't have WAN (internet) connectivity. Attention, you can be connected in LAN (home network) and once you can access the configuration page of the router you really are, but on WAN (net) not to be connected. As far as I know, the router needs to know PPPoE to connect to RDS. All right, I hope I wasn't too confused in the explanations!

Trackbacks

  1. […] This post was mentioned on Twitter by Ady, VIDEOTUTORIAL.RO. VIDEOTUTORIAL.RO said: D-Link DIR 655 router configuration for Romtelecom, RDS, UPC, internet starter, 3G | Videotutorial.ro http://t.co/WReG0AA [...]

  2. […] How to make RDS connection and wireless internet settings in a router (for rds) D-Link DIR 655 router configuration for Romtelecom, RDS, UPC, internet starter, 3G (for other connection types) Don't forget, if have any suggestions, complaints or additions not […]

  3. […] Dmz or TP-LINK TL-WR740N, a super cheap and super good wireless router, presentation and settings or D-Link DIR 655 router configuration for Romtelecom, RDS, UPC, internet starter, 3G. If you use the router only on LAN you don't need to make too many settings in the router, however […]

Speak Your Mind

*