In this video tutorial will present a very interesting application that I'm sure you will love it immediately, it is a software with which we put a Windows XP on a USB stick or an external hard drive.
I must say at the outset that this stick or hard that will put Windows XP will not boot in BIOS, it uses existing operating system, basically we have two sites that will run Windows at the same time we will be able to choose a second that we want to use it.
Installation is extremely simple, just indicate to his MojoPac where to install, after installation we have the top of a desktop Toolbar from there we can change in a second operating system on which we want to work.
The advantages of such solutions are very many, to be clear I have to say that MojoPac stick with him will become a portable computer, you can install the stick: games, movies, documents, music programs can store practically be as a bearer computer.
When you enter the MojoPac stick in any computer with Windows XP installed, you can use your programs, your browsers, your players and even your games without leaving any trace and without affecting in any way the operation of the host computer.
Requirements for running this stick MojoPac are minimal, just a host computer with Windows XP pre-installed and functional, no matter what hardware is MojoPac host computer that adapts to any hardware configuration.
MojoPac operating system does not support Windows Vista or Windows 7, the conclusion can not do an install on Windows Vista or Windows 7 MojoPac stick and no MojoPac running a stick with Windows XP on Windows Vista or Windows 7.
My advice to you would be to use a fast and roomy storage medium in order to install programs and favorite games without problems, if you use a USB stick would be nice to have more storage space than 2 Giga, I used 2 GB stick and not left me much free space is also good to NTFS formatted storage media for better performance and to avoid the limitations of FAT or FAT 32.Supotul you install MojoPac must have a decent speed, for example I installed a Kingston DataTraveler USB stick Migo 2 PLUS, it has a write speed of 27 MB / s and a read speed of 38 MB / s and an access time of 0,2 ms, it is a powerful stick, most sticks have these performances and that is why I say that MojoPac depends heavily on the quality of the storage media on which it is installed, even if slowly moving all going to work, I say that because you will be tempted to think that MojoPac bad move, it is not, its speed depends on the stick or hard drive that is installed, if storage is fast then it will be very nimble MojoPac if storage is not fast when MojoPac a move a little harder.
In my MojoPac moves incredibly well, even better than my system, this is because the stick has a good speed and a very low access time, on this occasion and you will see the importance of a quality USB stick.
We wish you a pleasant and are sure you will enjoy MojoPack for this video tutorial are two people responsible: MARIA Antoanela and Adrian, We thank you for the tutorial great idea that I have given you.
About Cristian Cismaru
cristi but the windows are installed? that you have on your PC?
Interesting!!, But for linux you can use this program to linux cuttings from a stik? Thank you. Regards Mircea
yes really loud… but after what martzy said, the windows we have on the comp or how is installed ???. ???
poi dak e asha you need a stick of at least 4 gb [or it depends on whether windows has man '] only for windows…. plus that man wants what you said a program and all that….
ast an rsp… bft
@ Mircea:
from what I understand it says in the tutorial that it can only run on xp… and I think p win 7…. I haven't tried yet…
@ Cristi:
it can run on win 7??
I haven't had time to try yet… logic is for it to work right? only when you want to modify a win 7 NLite tzil recognizes it as xp sp3….
I hope I am not mistaken, but I believe that one of the conditions that can run on other systems is that what you install new stick (windows + programs + games) to be allowed on the system performance we run.
Example: I use a 16GB stck, I install on it win xp sp3, all the necessary programs (Office 2007. Nero 8.0, its necessary programs), the game Time Shift or Crysis go with it to work but there they have a pentium 3. It will run my windows on the stick… to use office 2007 and play Crysis?
if I remember well the trick I apologize if I hope this has cleared up some issues completing
With sincerity and respect!
@ Fanibu:
I think you're right… even more so it's a normal CV !!!
BFT
sal everyone .. can someone help me and me with something with a program Acronis True image.nu know him first makes secure areas after first backupu backupu or after secure areas (secure partition areas is defending you from viruses is not it )
@haosss: For all who do not heed grabitii and text above tutuorialului and all part of the tutorial and is also on our website:
"MojoPac does not support windows vista or windows 7 operating system, in conclusion it is not possible to install windows vista or windows 7 on the MojoPac stick or run a MojoPac stick with windows xp on windows vista or windows 7"
This was a quote from the description and the text just above the tutorial… before you ask questions read the text carefully, watch the tutorial head-to-tail and only then ask questions !!!
@Fanibu. You do not install any windows on the stick. You only install the mojopac program on the stick, which behaves like a windows. When you install mojopac on the stick, it will create a virtual desktop for me to put it that way. This desktop is your new "system". If you try to install a program (inside mojopac) you will see that that program is not installed in "c" in your operating system. The program creates a virtual disk "c" that belongs to mojopac. Once installed all the programs you want, on any other computer you will have your programs. But the speed will depend on the host computer. It is a 3 board, it will go slower. The more powerful the host computer, the better your mojopac will work. In the tutorial it was said about a bigger stick, in the idea that you will want to install INSIDE the mojopac program more programs that will take up space. In short, you open mojopac and everything you want to do, install, uninstall, etc.… you do it in the interface that appears.
@Andrada: Because I could suck as much blood as a tick, as Christ said, I have to find a more vigorous animal. Otherwise might die and my host eu.Adica animal and I must be able to sustain, to they can run the calculation programs and newer games.
If that computer has 512 RAM, 20 GB Hard Drive, onboard video card and 700Mb proc… what else is running… only windows to enter the net?
@ Fanibu. Obviously if you install cryssis and want to play this game on a calculation has onboard video card you will not be able to play. But you will be able to use other programs.
@Andrada: When running on another system with the settings on my account I go to my network settings ie
the chip of my network card… will I have to change the chip of the card in order to be able to use my settings on the net?
@Fanibu: What happens to the IPs, DNS, Gateway etc?
@Fanibu: Nothing, settings adapt to the host PC, the host PC if you have to have a net RDS RDS settings, and so on!
@Fanibu: I die when I see you with more and more questions, don't you better install it and play with it to see its limits? I mean, what is the beauty of the tutorial and your pleasure if we would show and say everything it has and what needs to happen to it? What does it cost you to put it on a stick and test it yourself and see its limits? Aaaa yes… if problems arise and you don't understand something you come with questions and we help you, but you don't even install it you come and ask… I find it strange adik…. Brother it's free, usb stick I'm sure you have it in the house, put it on stick and beat him, because nothing jumps in the air !!! This is how you learn by researching and learning on your own without asking a thousand questions !!!
@ Fanibu. You understand that you, through the mojopac have a portable windows. What you install the mojopac will run on any computer limitations. I mean, if the host computer has no Internet or another network, you can not use your settings so you do not have that. It is very simplu.Mojopacul will adapt to the host computer settings regarding internet. The same story is with the printer for example, if it is installed on the host PC, you can use without you in installing any driver. Automatically detects network and printer. When you log on with another horse you log ip from calulatorul respectively.
The better you do as Adrian says. Install it and then if you have questions intrebi.Va be very simple. I have tested it and are very happy with el.Tutorialul is very well done and look tutoror.Mai meaning every tutorial carefully and you will understand more than likely. THANK YOU for the tutorial. Very useful.
DO NOT WORRY announced MODJO people at CAP as working on a version for VISTA TO BE A BETA VERSION THAT WILL SOON AND WILL LAUNCH AN ALL FREE.
ADRIAN greeting for the tutorial, so on with respect ionel tinetio.
But if the program is based on virtualization, consume more resources? as Virtualbox?
@Mircea: For linux we have something much more interesting, type in the search box on this site "linux on stick" and then press enter.
@haosss: I have only run MojoPac xp on vista and did not want to run on Windows 7 not tried.
Most of the company that makes MojoPac said they do not support vista, but this project had been abandoned across the street were not pronounced clearly, I think windows vista 7 is closer than xp .
@Fanibu: Works on any computer with Windows XP installed, the ideal is to be consistent and the service pack (if Windows is the stick is made by a sp2 windows would need to run all the sp2, but this is not a rule).
Experiment and you see what you get, know which are the limits of this solution and put the results here to see them all.
@haosss: I managed to bag a stick 2 MojoPac GB, only certain XP without any software, which is why I recommended that you stick more debris, perhaps install and I read something (software, games) .
@marius: Any virtualization program consumes resources but MojoPac does not consume much, it is a "thin" virtualization, see how much it consumes on you, on my system (MB Gigabite EP35C-DS3R, Intel Core2Duo E8200, 2GB ram, ATI Radeon 4830 HD ) eats very little, almost negligible.
Considering that the use of all systems should not be even the slightest problem on resource consumption.
So Christ mojopac that my windows install? installs one who I am on the PC or installing xp sp2?
Can I install and games?
Don't worry anymore… it's not a big deal… more waste of time. Better use portableapps (ie portable applications) more understandable for everyone… it's a video tutorial on the site. It runs on all types of windows and all types of computers and installs the same on (USB flash drive, iPod, portable hard drive, etc.).
I installed it out of curiosity on a 16 GB stick with different applications on it… it takes time to sync with the host computer… it gives errors in Mozilla Firefox… it tries to run windows from scratch. For those who want to- and kill time and swear in front of the monitor, try.
@Wolfyz: You can install anything from the simplest to the most complex software 3D games.
Cristi, brother, anything, is that so ??? - “write speed of 27 MB / s, a read speed of 38 MB / s”!
Hello! I Stelian, and would like to give me some ideas what could you do to not rebooting my computer, because lately all I restart the computer, and she appears like a blue eror psyche memory dump in Windows Vista especially enjoy a good joke when he asked louder, and I have no idea why and what I can do!
@Stelian: Desfal and clean, wipe the fan from the dust processor, the fan from the video card if you have one, put the vacuum cleaner in it carefully and vacuum the dust, unscrew the source and clean the dust from it… it can be a weak source… it has no power to supply how the outputs should be when requested and therefore restart, there can be many reasons… change the thermal paste between the processor and cooler… put everestu and see what temperatures you have what voltages, It's tutorial with everest here on the site… write up search everest enter and watch the tutorial…
May I please the soul cristi ajutama mine.am and put myself a thousand questions and I answered nimeni.te please tell me 'and me to Acronis True Image secure areas that are first or becapu? thank you very much crystal.
@ Adrian:
Yes ms… maybe you're right… It's better to try, but I didn't have time…
ms anyway…
Cristi_admin:
Thanks a lot…
I think you're right it's almost 7 win vista, but I said experientza own, I tried to change with nLite and I recognized him as a ::. Sp3 win xp pro. ::
bft!
@adytzu: If you read in the comments from the tutorial with Acronis True Image it was said both in the presentation text and in the tutorial and in the comments that first you do secure zone then back-up… it is not mandatory to do secure zone it is only recommended… .eu I backed up without securing the area… Read the comments and look at the whole tutorial before posting a comment, and try to post to the tutorial that links to your topic or problem !!!
@ Aditzu:
try to ask here about "" "acronis" "" https://www.videotutorial.ro/?p=320 i think itzi will rsp cnv….
BFT
Well thanks a lot adrian
@ Adytzu:
ero io!
HAHAHA ....
Understanding a non sei caps di nome, almeno!
che sto scherzando you!
Ciao bello!
yes… scz me with the com above…
I did not read above….
scz again
very nice this program you go where you want with your windows… I'm glad you do such tutorials .. really very practical… and very easy to install
NOTE: for proper experimentation curious and eager I am to go on VISTA version is only beta, merge100%.
Download:http://www.4shared.com/dir/15722303/48677b18/sharing.html.
I insist not advertise any site, is only for those who wish to experience.
@ Martzy. You you you you install Windows on your PC.
Hi there!
I also have a problem: I try to format an NTFS stick; but in the end I get an error: "windows was unable to complete the format."
Any idea what could be the reason?
The thank you box
@ionut:
for proper ANDRADA: We specified that is ptr. vista, yes if you have vista you go, if you follow tutorialulde xp where you download ptr.xp.ITI WANT BAFTA.
s website vizitatimi me http://fileextra09.wordpress.com
@ Daniel. Do not really understand Taul comment. I have not made any remark to what you have posted. I answered his Martzy, but I think that is just exactly what I said. I did an experiment. I installed on my computer mojo I xpsp3 and then I put it to run on a xpsp2. To be honest I'm not really clarified what Windows is installed on mojopac because when I click right on my computer (in mojopac) shows me the version of XP that is installed on the host PC, or if it runs on a computer xpsp2 where xpsp2 xpsp3 installed and if it runs on a calculation which is installed xpsp3.Motiv which tend more to think on mojopac not install a specific version of Windows. Program runs on Windows PC clone creating an interface identical to that of Windows. There are several functions that can not be accessed from mojopac. Every time you run the mojopac on another computer he started, heavier load (@ Fanibu) because he takes host PC settings. Once you upload all settings, mojopac going very well. Two small problems would be mojopac regarding KIS and Office (solved), but otherwise works perfectly mojopac and gives no error but no calculator.Cred that in this respect the best we can clarify Christ. I only said what I noticed eu.Posiibil I am wrong regarding the version of Windows that is installed on mojopac. The above comment was strictly on speed mojopacului games. No matter if your PC is a Pentium 3 host where you want to run some applications.
Sall… if I go to a friend and he has a infected calculus but he doesn't know, my antivirus installed on the stick only protects my MojoPac or the USB stick, or I become a carrier of viruses from one calculus to another !!!! !!!!!!!
Hi I have a question can I ask or what windous xp
I like it, you can do a lot… ..thanks a lot Cristi for this toturial…
I want to make a tutorial on startmart nero download from the internet.
be ready in an hour.
hellooo!
I tried Mojo and is ok, but to see if it works at my service porblema mojo.exe is you have to execute on the stick and I do not work right, but I'll try.
From what I see your mojo clones (as said) wind host!
I installed a portable hard MojoPac
go FB.
The problem is that I do not have access to host hardware, nor the
portable hard drive.
I have access only to what I installed MojoPac.
There is a solution to acceasta problem?
If you turn on the computer and it does not want to enter windows, and you have connected the external HDD to the computer correctly, then you need to rearrange the boot order in the BIOS. If you have windows installed correctly on the external hdd, and you always want windows- to boot after it, then in the BIOS you will set the first boot to be the external HDD. Now I don't know what bios you have, but it would be good to see in the menu "boot" -> "HDD boot priority" [or c- I have something like this 🙂]. If it doesn't appear like that, then try to see where you have the boot option and from there you arrange the "booting" to be done for the first time after your external hdd. And if you want windows to boot permanently from on the “host hdd” then in the BIOS you arrange the boot order to be done according to the desired HDD, (“host hdd”). But to recognize the name of the “host hdd” you need to know its name and capacity .If you want to temporarily boot from the external HDD, when the computer starts you have to press a function key (F10 or F11 or f12, it writes to porn anyway ire which is that key. Write somewhere at the bottom of the screen), and which will display on your screen the list of computer components from which you can boot. In your case you will choose to boot after the external hdd.
For webdan
Thanks for promptness.
You do cuttings with MojoPac.
In MojoPac go after Windows startup.
The problem was access to hardurii after entry (start)
in MojoPac.
After installation I was able to have access once probably happened before or restart figure was the first launch of MojoPac, I did not realize.
No, I wrote one of the methods that I would have approached if I had been in your place. If it didn't work as I just wrote, I would have connected the external hdd only after I entered the windows. many times not to enter my windows when I had connected a USB stick to the comp. I had some emotions when I saw that the message "NTLDR is missing etc .." appears, but after removing the USB stick everything came back to normal. No, it still happens…
Hello I have a program that queries will then be installed or portable regular programs?
You can install any program, portable or not!
Thanks
Cristi - I installed 4g MojoPac on a stick and I have the same problem as Elmit: the problem is that I do not have access to host hardware, nor the
a portable hard drive, I can access only stick I installed MojoPac.
there is a solution to acceasta problem?
going to run on your computer at work where I have no right
thank you
Hi am .I have a question… ..you can create a pre-installed xp… I have a license for xp… .and kum you can do something like that… with what software? [email protected]
Thank you!!!
Hello. You do a very good job;) is it possible to put a win p stick so I can use it on a pc that I have linux?… Thanks
No mojopac can not be used on Linux!
I understood from the description that mojpac can not be used on Linux, the question was whether this can be done by any means.
The problem you have is that you use the free version of Mojopac. If you buy the program, you will have access to all the partitions, except the "C" partition of the host PC. However, even in the free version you should have access to the external hard drive.
go and 2 gb memory card?
Yes go, since it's an external storage medium that not work?? Have you looked at all the tutorial? Look more carefully and then ask the question! If you go on their website there's a video with a little demo on the front page that shows you what it is, what media can be placed and used
If you read Cristi's comment about this tutorial you would have seen, here is what Cristi says: "My advice for you would be to use a fast and spacious storage environment to be able to install your favorite programs and games without problems, if you use a usb stick it would be good to have a storage space larger than 2 Giga, I used a 2 GB stick and I didn't have too much free space left ". Sorry now I see that day memory card tea I don't stick I think it works
Comment sry… I see all the partitions on the hdd, except the C partition, and this program also installs on smaller sticks… MojoPac occupies only 81.8MB installed, it can also be installed on a 128MB stick, but without any software you don't have much to do with it… Possibly a mess
It is sooper the program… gj
This article is not really what interested me. I mean to put a stick operating system directly, to run Live, and the back to have the opportunity to boot from the HDD him or computer. I say that the possibility that the computer's hard drive file system to be lost and can only boot. The idea is to get the stick and recover various files. How exactly is the option to Hirren Boot.
To write up what you want in the 'Search videotutorial.ro ... "the top right so Bart PE hit enter and you will find the tutorial! Do a Windows Live (an ISO) following later to put the image on a stick and make it bootable!
Classmate! I probably wasn't very explicit, or I wasn't understood. I want to make a pen drive with windows live, as I wrote above functional as Hirren Boot Cd -> windows live. So I want windows to be already installed on the pen drive with the option to boot from the pen drive and / or hdd.
I even forgot what I said? that picture made with BartPE put on a USB stick and make it bootable! No your windows will be the same as real hard on a USB stick! Can only do what I said above image Live with XP that have few windows programs .. but you can not do or chicken or install Windows on a stick then boot it as the hard!
Of course, I forgot, that just do not eat junk here. Mate! NO FLAME! I insist, this tutorial really does not make any reference to PEN DRIVE (STICK). Bart Pe, Windows Live, Hiren Boot already have. My interest is to have a Windows Live aa stick. I repeat, this tutorial is for CD or DVD depending on the size plugins. And I allow a finding after watching the tutorial: The programs that are installed with a higher level routines (here specific registry) do not believe that this procedure is valid insert programs and programs to be included only in portable version. By analogy we tried to replace the contents of a kit with Hiren Boot Xp course that did not work, needed a lot of files in the folder I386. For the moment I quit when I will make a come back with a comment. Good luck and perseverance both me and to you. Bafta!
mistho schedule (if I had him if you leave this program be created leave .adica be sold more expensive than a windows) are surprised that it is free
It would be ideal if you've manage to install and we also show how this program works (ie to continue the tutorial where you left), that if you can, anyway your words and I think you know what you're saying is very good program, I'm surprised it's free
Good luck in the future
I want to know if I can install Windows on a stick mojopac where I PortableApps?
kids portable apps folders on a partition in Windows, install and then copy back Mojo Pac portable apps in folders stick. You are not at all creative, read more, be more open.
I managed to install and I mojopac, I would know what to do further, how install programs?
Dip stick, start mojopacul installed on stick and install like any normal Windows programs.
Hello, and congratulations for this tutorial, After I watched the tutorial and I mojopac I started to use it and I was really pleased with it ... it was exactly what I was looking for and I found it very useful, but at some point I started to have some problems, do not know if because of this little program or for other reasons, and I thought to write here can I find an answer.
1. When I want to open a design program, which used to work for me, it suddenly gives me a startup error: The application failed to initialize properly (0xc0150004). Click OK to terminate the application. ” I can say that I formatted the external hard drive (600 GB) and reinstalled the program, and the same error;
2. I installed Office 2003 and it works perfectly; I wanted to upgrade it and install Office 2007 and it gives me the following error: “A required I: \ OFFICE2007 \…. \ OSETUP.dll cannot be loaded. This may indicate that the file is missing or damaged ”… I want to say that my previously mentioned programs run on the host windows without any problem. If you have any ideas, I am waiting for an answer. Thank you very much
Mojopac Try using another computer and start the program design, see if it gives the same error. Do the same with the office. If it works, then maybe the problem is from the host PC. Regarding the office might as another pc not work. Office's behavior problems on other PCs (where the office is not installed), but I do not know if you were hit by this problem. But first try to experiment on another computer.
I tried on other PCs 2, and the same result, when I went I used the same design program computers, home ba, ba to work, and from the moment that gave me the error never went on any one: same error!
2007 install Office and give error
Can someone help me! =
MS Office crashes and closes immediately. Maybe someone clarify me??
Please!!!
Did you make any video explaining how you put a Windows bootable stick?
there are a lot of tutorials about windows on stick, through a lot of methods. both xp on stick and vista or 7 on stick, you just have to use the box "search on videotutorial.ro…" from the top right and write there: bootable stick or windows on stick, even the last tutorial you can look for it, it is presented the easiest method, write in the box on the right: wintoflash, enter and you will find. Tired of searching before you asked?
Very interesting program, I haven't tried it yet, but ... I have a question…! When we put the stick in the PC, do we give it another command…., Or does it open on its own ???
Christ, have any video tutorial on installing Windows on PC?
sall please can you do a tutorial "How to install an antivirus on stick"
Thank you!!
Well you do not need a tutorial for that. You take a stick, connect it to your PC, and download an antivirus program on it or it portable vaccine. When you need a scan chicken stick, run updated antivirus and scan it.
These programs can have functions like:
- some are portable programs, with which you scan the PC from syick;
- others protect the stick by: does not allow writing or vaccinate the stick
I will give a few examples, but read them carefully as a mixture. Do not sit and write them into categories.
Examples of portable antivirus programs: Dr.Web CureIt!, COMODO Cloud Scanner Portable, ClamWin Portable, Mx One Antivirus (it has two functions: 1) is installed on your PC and protect it from viruses of stick 2) install it on Stick and protejaeza stick), Avira AntiVir Removal Too (can be run directly from the stick), Portable avast! 1.0.133, Panda USB Vaccine (with that stick vaccinate and protect him from any future infections. Creates a special file that can not be removed except by stick format.) USB WriteProtector (this is not a virus itself but its own a program that protects the stick)
There are also USB sticks bought with preinstalled antivirus.
If you read carefully what I wrote, you can choose according to your needs, desired program. I note that none of the programs presented requires no complicated settings and some are free and others charge.
Bravo .. very interesting.
I have a question mojopac install and then I gotta stick or Windows XP is already installed if you can please tell Sami.
You just showed in the tutorial, just install Mojopac the USB stick and that's more concerned tutorial head-tail once without scrolling and read reviews from 1 page and the text above tutorial.
Below the last comment you have this: Page 2 of 2 [<<] [1] [2]
click on [1] (written in red) to get to the comments page 1 this tutorial.
I have a question mojopac install and then I gotta stick or Windows XP is already installed or to install it? Please if you can tell the id messengers sami [email protected]
Hello! If we put mojopac and windows stick and bag sticu 7 a windows xp windows go 7
Cristi did not understand how out of Stik USB port without losing data on it, what are the steps to be followed
also how can I copy folders from the host clculatorul stik in mojopac
Hello.
I have a samsung notebook and has no cd-rom, I would like to reinstall windowsu.daca know a tutorial how to make a bootable USB stick with Windows XP please help
Why do not you use the search box on the top right black border? We have 3 tutorials on how to put Windows on the stick! One about how to put XP on the stick, another about how to make Windows Vista or Windows 7 stick and one of WinToFlash, a utility that knows how to put any of these 3 stick versions of Windows (Vista, XP and 7) So you go play and write in the search box on the right WinToFlash, you enter and you will find the tutorial! We have over 300 tutorials on this site, simply write in the search box the name of the software or what you want to do, you enter and are sure you will find almost everything you need!
I looked exactly as you say and search engine google sends me in no way site search results.
tutorial with Win Vista and 7 lam gasit.m looked and video examples below but it was not XP.sunt tag for a fan of this site and learned many of these tutoriale.chiar me and asks how the nam given over one with what I asked you sus.multumesc response!
It's a personalized search man from Google who searches and offers results only from here on the site… when I see you morrr… how do you see google how ready do you jump from the bottom up… what does google have? bite or what? Search for it with the top right search engine on the black edge of WinToFlash and look at the links. Do all the links written in red start from those results with “https://videotutorial.ro/bla-bla-bla” ??? When you want more, you don't even know how to read and notice that all the results displayed are from here, ONLY FROM HERE!
Hi, I installed MojoPac, and I put a few programs on it that I 16 Gb USB stick, but when mother went to a friend did not want to start any computer, no boot please spunetimi as we start the another PC.
I follow all the proper steps and gives me leptop disk errors .. installation and do so on a normal pc
Hi I saw the tutorial and it is very interesting but I have a question if mojopac run on virtually stik will be required to have windows on your pc +? or go on sites 2 windows: D wait for response on j3b0b0 mess id plsss
Awaiting you response on your ID until the water sit lacing. We need or you need us to answer? Yes, if you want to use Mojopac, you need to install Windows on your PC that stick stick.
It will not let useless IDs will not contact anyone from videotutorial.ro team! Answer questions and discuss here all problems!
Hello, Cristi First I want to congratulate you for all your tutorials are very hard, learn much useful and practical world, I have a big problem now 1 day I purchased a stik of 8 1965 NY gb PNY especially since I put this kit the stik that I had an external storage drive, the problem is that we have introduced in the USB stick I formatted NTFS I did, I installed the program stick just like in the tutorial, all well and good, I between those windows, I gave him a look and then got stuck, now try to format the stick and not go to format the place says it is protected, I tried to take that program and folders to delete, m I forgot vrun button stick maybe have a protective bonding but has nothing now can not put anything on it, I can not delete anything, what do I do? Any idea what causes this lock? there vrun program to unlock protected sticks? mention stick is brand new, I gave him the lions 120 emag.Astept an answer, thank you.
I have a big problem when you open it asks shi account password
These are official rates flash you tested you, please do not post false information (totally bogus)! And also I know of no 2.0 usb flash to go with 27MB / s write, nor to go with more than 30MBs reading!
Speed reading and writing to a USB stick depends on the quality flashcards and controller's performance, I have a Corsair Voyager stick that read almost 33 Mbps MBps write 12 not exceeded.
USB interface can transfer data at a theoretical speed of 60 MBps unfortunately theory collides with practice (maybe explain in a tutorial) where the USB can not transfer more than 40 MBps.
If you stick can be transferred to interfara usb stick 40 MBps, whether these are for reading or writing data.
I still struggle to install Windows XP on stick because I have a mini laptop that I use in the car and classic's hard drive do not last more than a few days from wobbling
can someone help me .. is that possible?
Good evening, I would like to know, when I got to the mojopac installation-install option, my C and D appear, but I don't have a removable disk, meaning F..can I install it in D… ?!
Well to defend your F must have a USB stick plugged into the unit. Do not install Mojopac D. It is designed for both sticks and
sall cristi how can you put a tutoial dezistala widows xp 7 and put many applicants do not go on widows 7.dak you put dami and I'm a lik.
Type up in the search box on the right on the black border: How do we make all the older software work on windows 7, enter and you will find the tutorial that I am sure will help you. By the way… windows is not uninstalled, eventually the partition is deleted, it is formatted but you can't uninstall it to uninstall it…
Hello, if I use the mojopac win win parallel to the pc, I mojopac admin rights can install software from the modem rds ex and I connect to the internet through it? For the moment the PC can not install because I have administrator rights
You hand someone you do not try? Install it yourself and see if it will work or not. I guarantee you will not jump in the air if you try anything ...
I installed mojopackul but when I run it tells me I need administrator privileges and enter the admin username and password, any suggestions?
ok, I installed mojopack, I run, all good so far, I installed the modem and software for digi, but it just does not run after installation
it might not work on Win 7 enterprise trial??
yes error says mojopac is not supported in this bone…
Why can not I open mojopac only on computers running Windows XP. I tried on vista but wind 7 5 of testing was not successful either.
is an error as there are more users online, and just all administrator.
has anyone encountered this?
Read information about this tutorial!
Look Cristi says:
… "MojoPac does not support the windows vista or windows 7 operating system, in conclusion it is not possible to install windows vista or windows 7 on the MojoPac stick nor to run a MojoPac stick with windows xp on windows vista or windows 7."
I like the tutorial, but know that it doesn't read "hello". but “that one”
If you want to install an OS from USB stick, try UltraISO. It's really good.
Hello,
Everything is OK until I want to install an application. ERROR! Do not go! It's something we have not seen?
Everything is OK up to speed on the stick that moves application, takes more installation programs, load application on a host PC is good for those who stay in a cigarette rabdaresa be patient :))
Great, all tutorials are welcome and greatly help us HAPPY BIRTHDAY keep up the good work thank you.
Hello, please if you can make a video tutorial 7 to put windows on an external hard drive. Thanks in advance!
I was very impressed by how professional and explicitly of this tutorial. Mr. Cristi, personal thank you and I wish you luck!
I tried installing but it happens that in your tutorial stops at 43% and did not want, I tried to install several versions taken from the net but all of which have the same stop at 43%
how to make out your stik?? you said you do not give out direct stop I do not know where? where exactly?
I found everything ok but I have a question I dak XP stik and stick it in a PC that has Windows 7 go?
Welcome. I guess I can install the program on the memory card micro 16 Gb. Thank you.
I think that's how Mr. Cristi Mojopac.
Give my regards Cristi.
I also have to say 2 problems asa.Am a hard 20 GB I Windows XP.
The problem is the following… whenever I change the windows in maximum 1 week the PC starts to work harder and harder. I think it is from the hard drive is too worn.
What software do you recommend to give it "life"?
The second problem would be the following… I have a 2 GB stick on which I would like to put the windows and the windows to boot after the stick… not to boot after the stick.
From what I read above "I must say from the beginning that this stick or hard drive on which we will put windows xp will not be able to boot from the bios, it uses the existing operating system, we will practically have two windows what will run at the same time and we will have the opportunity to choose in a second that we want to use. " it is not possible for the stick to boot from the bios.
I must say that I have an external hard GB 300 the install / download everything.
What I'm trying to do is… I want the windows to work well after the stick and everything I download to download to the external HDD.
What goes faster Windows after stick or by hard?
bravo brothers… keep it up… it went great for me. I sit and wonder sometimes, what do you guys have to gain from such tutorials .. :)) anyway..thanks a lot
If you install an antivirus NOT IN MOJO beat THE COMPUTER MOTHER?
I wonder what would happen if I install Windows XP on a stick and that stick if I'd set the boot device 1st on a netbook. I noticed that if you go into BIOS with USB stick inserted in me sees it as a second HDD. Would I be able to make netbook running Windows installed on the stick? That's because when you try to install XP directly on HDD netbook locks at one time and fail to take action to end.
Well if you install the hard disk does not stick stick that's not too good a life to run his machine
However if you want to install windows xp (windows trying 7 better if your camera has 1 GB RAM for XP next year as it was in May Aiva not support) the BIOS from AHCI to IDE change and vice versa if you install AHCI 7 ie
can you be more specific please do not understand what has changed from AHCI to IDE and vice versa thanks!
Adata stick to digital vision is to 30 lei 16 gb and a very good speed
hi I use a macbook, can I install on stik win? after him? dami some advice if possible.