Simple overclock for the video card with tuning and testing the results with furmark - video tutorial

In this tutorial we will go into the realm of graphics performance and overclocking acquis with software that will ease our task is to overclock video cards from Nvidia and test results (Benchmark).

These programs are: the first is Ntune which is an overclocking and monitoring utility for the video card, produced by Nvidia and the second utility is Furmark, a software that helps us test the performance obtained after the overclocking process (Benchmark) and after that is to check the stability, by stressing the video card, simulating an intense use of it (stability test) or (burning stress).

Overclock CPC is used increasingly more to raise performance without paying extra components, simply lift working frequencies for GPU (graphic procesing unit), memories video card and frequent-their shaders.

Essentially overclock site is getting high performance at low prices, but in time this branch IT has grown and moved away from the original goal, now enthusiasts overclock's invest thousands of euros in components of increasingly sophisticated and cooling systems revolutionary.

When the highest frequency of a CPU (central procesing unit), GPU (graphic procesing unit) or RAM ( random access memory ), Increases performance, but as a side effect increases the temperature and that is why we need an active cooling system, ie the fan.

Video card manufacturers out of their need to reduce costs have eliminated active cooling from many entry level video cards (beginner range) and some mainstream (middle range which is the best selling) and that is why videotutorial.ro does not recommends overclocking for those video cards that do not have an active cooling system.

This video tutorial is part of a series of video tutorials dedicated components and overclocked PC, you can find using the search engine on our website.

Videotutorial.ro assumes no responsibility for any damage that may survenii in the process of overclock.

This we do on our own responsibility, we will only show, but the choice is yours for the implementation of the explanations of these video tutorials.

by Cristian Cismaru



Related Tutorials


Comments

  1. salut.felicitari.am learned a lot from voi.am a problema.am a GeForce 2mx 400.stiu it's veche.nu originale.le I can put drivers from nvidia last, even on an older computer in 2003? merci.cind make a tutorial with azureus.

  2. beb3_mykk said

    here is my id: beb3_mykk if it's one of you cristi or boby to clarify me and on my hand with something put this idu makr to clarify me …… online… ..ms beautiful

  3. @beb3_mykk: Clarify about what? you did not ask anything! Not contact anyone will not let IDs and receive emails as spam splendid from the most malicious!

  4. Good and this tutorial too bad I don't have Nvidia

  5. pity we ATI Catalyst anyway pc mine is outdated morally and physically, actually I Cumar the store obsolete just as he said Cristi tutorial last I got fooled but never would I have taken Tiete it all so I hope I will not let these beautiful tutorials just fine

  6. salut.am put myself a intrebare.astept a raspuns.merci.daca sorry I did something bad.

  7. @eugen: no one answered you because the answer is right under your eyes! it was shown in the tutorial how to go and how to download a driver for the nVidia video card, if it doesn't have one for your type of card, this is it anyway, you can't know a different driver than from your card model!

  8. I can rezolvat.merci.cit percent overcloca a plate without a ardem..sau placa.am depends on how much a gt.depide 8600 nvidia motherboard supports?

  9. @eugen: Overclocking doesn't really have limits… you have to know something about frequencies… you have to feel when you can or not to "give" them to feel when you get tired… when it's enough… not to be chalice to throw yourself at high frequencies … But to raise them a little… to feel when you have to lower them

  10. What would be the highest temperature a video card reaches, without "frying" it?

  11. boby_admin said

    @ovvvy:
    There is a certain temperature (depending on each video card)
    Depends on the video eg video cards are going and over 100 degrees and do not say nonsense
    But a normal plate between 50-80 degrees but the most important is that the board remains stable after overclock
    I personally had a video card from nvidia asus 8600gt with passive cooling that reaches 105 degrees

  12. bebe_Mykk said

    then for 1 week I keep leaving messages k it doesn't work to see the latest video tutorials… from the network it doesn't work any tutorial apart from the last ones… ..any site I go to see what plug-in should I install or with what ??? neither on mozzila 3 nor on opera 9 does the same say that it loads but… .does not load… .it doesn't stay like that at all… .transfer data from the 10-hour video tour in vain… what is the problem / ?? makr let me know? ?????????????????? everyone works only for me does not want to go the latest tutorials I mean… ???????? dc pc not weak net is not weak ..the others as I go I refer to tutorials… ..what problem AM ????

  13. @bebe_Mykk
    mozilla uninstall with Revo Uninstaller (vz it's a tutorial on it can you see him) delete all the registry after reinstall mozilla ones may have a conflict in your browser so you do not go to see my opinion VIDEOS

  14. or go to state> programs> mozilla> and choose firefox safe mode

  15. brothers an overclocked and about 7600 gs go up to as

  16. boby_admin said

    @bebe_Mykk:
    We've changed some time resolution tutorials in higher resolution
    What you say is quite serious that you can not track the latest tutorials
    I do not know what to say may have a weaker net
    For now you are a unique case and ask the others about such problems if they bring us informed

  17. boby_admin said

    @marius:
    Knowing that I had a list of video cards on earth but I pierduto
    If you want to overclock you start to know that is not so
    There is a table, a list or something like that unfortunately
    Even if I had a video card identical to yours I still could not tell you and I tell you and why
    Because computers do not find two alike
    In computer we have and processor power, memory, motherboard and all contribute to the stability overclock's made of you or of course you can if you are weaker and disadvantaged
    Pesonal me I would like someone to tell me what frequencies can raise my video card
    Here's its beauty and bother you to do more than the other
    It's a competition
    Believe God and that even if I ask nicely it can not respond to you
    The answer is you !!!

  18. Craigslist said

    I pulled 3.373 what about good score ??

  19. boby_admin said

    @Craigslist:
    Interestingly would tell us what you achieved these results configuatie
    Maybe we'll do a ranking between ATI and Nvidia
    I personally did 14800 2duo E8400 core processor Nvidia RAM 8800GTS 2giga

  20. Craigslist said

    I have a board that is too good not really bad is about love GeForce SE 7300 / 7.200 2GS giga RAM and processor Intel 2duo 2 6.500 with this CPU

  21. Craigslist said

    even make a top would be of interest for the luck and so on tinetio

  22. Salut.Pe to Nvidia website of the series when I select my plate part video series that 7 filter Product disappears and I'm not sure if mia found the right driver.

  23. Craigslist said

    you found it
    I do so to me and I yo series 7

  24. Mia loved this tutorial Cristi especially overcklocul.La benchmarking temperature that went all the time (except for inceputl testlui) of fsot 78-79, but I went with the frame 2 30 minutes secuna.Am state to the test my .Intrebarea if I would be able to state that sky spin my fur increasingly more smoothly?

  25. I can not find where to uninstall the driver from the video card !!!!! We looked everywhere, but I simply do not know where E. Revo Uninstaller IN THEN NOT !!! ????? What do you say?

  26. good… not having a video card, but an integrated CHIPSET, if I buy a video card can it be installed or adapted to the computer ??? I don't know if it has the right place to mount a video card inside. maybe you know !!!!!!!! AND IF I BUY MY VIDEO CARD, IS IT HARD TO ASSEMBLE ??? THANK YOU……

  27. @Dany 75:
    Come as you ironically, I would not know what to your pc?
    You must have an expansion slot for video card, whether it be PCIExpress AGP and PCI can have and simple.
    One of these three still have to have, but you can find out, we do not know where.

  28. makavely said

    hello… I also have a question about overclocking,… I have a video card you have radeon series 3300 (shtyu only because of 512mb) if you need more please tell me how I find out because from the books I have I did not find … ..Details about pc cat shtyu and me: P: processor-intel core 2 quad q6600 2.40GHz,
    G31M-gigabyte motherboard-S2L
    memory ddr2 4096mb dual symmetric ,,, if I didn't write something I really needed or I wrote the wrong excuse… I don't have them with these so detailed… thank you… respect

  29. beb3_mykk said

    hmz and I oveclokat the video card….: D but it started to fit with me: D and I left it softer… as… uruia venilatoru and it had reached 68 dde degrees….: D still I had 730mhz and 990 mhz…: D however: Dpe a 9600GT is something

  30. @beb3_mykk:
    After you have overclocked the board and think it is stable you have to give it a stress to see if it is really stable, run Furmark on stress for 2-3 hours on high settings.
    If and you resist it means you did a good job and if you do not have to start over.

  31. i like overcloku… .super

  32. Yes it is nice chair I overclocku the bus Core: Memory 350 and 530 I uract bus to bus Core: Memory and bus 470: 650 I have to climb and wait Cristi Dabei that you said that race.

  33. Bravo ……. Thousands of thanks for the lost time, for the kindness and patience you had in all the presentations. You are strong, without you I would not have managed. I am glad that among the Romanians there are also “People "Like you. Keep it up.

  34. the coolest site… with tutorials… ..I made my computer perform…:)… gg guys… .continuatzio tot ashea….

  35. radu_admin said

    I have a VideoGe Force 8600 GS video on my laptop and it won't let me change anything. Do you have any idea why? I installed the latest driver from nvidia for the beta version… otherwise I did as you presented and nothing. I tried again many times but it comes back to the factory default settings. Core Bus = 500, Memory Bus = 400. At the FurMark test it took 930 to a minute

  36. buligadanny said

    very good tutorialu it
    Phase I knew this about a month but it's very useful
    I intel core duo 2.2ghz / 1 GB RAM and NVIDIA GeForce GT 7300 256 mb
    I play gta 4 at low without problems…. Until I set the video card it barely moves (I have a question too: the frequency at the core buz was 350 and I set it to 450
    and the other one was at 300 and I put it at 400…. can the video card burn?)

  37. @buligadanny: You don't burn them to burn, but it's useless what you did… you overload them unnecessarily… and you shorten their "life" period MY OPINION !!!

  38. @buligadanny:
    I do not know what to tell you to overclock because no recipe, everyone has to feel alone and components limit is about and variables: power, memory, motherboard, processor revision and others.
    See that we have a tutorial with a stress software for the video card "FURMARK"

  39. buligadanny said

    I force myself only when I play video paca gta4.sau bn cod5 to go, otherwise leave it as it is
    as for her life…. anyway I have to take a 512 or 1 gb

  40. boby_admin said

    @buligadanny:
    If those are your criteria you buy a video card is not a good
    Believe that little matter you have 256,512 or 1 giga memory
    The manufacturers often put giga memory 1 just not that sound good that would increase performance too much
    And as I see and work
    I can show you video cards that have only 256 memory and stick with …… .. many video cards

  41. buligadanny said

    yes that's right… ..but some games don't run properly on older boards. maybe you only have a pc bn configured

  42. honestly this tutorial helped me a lot, I have a rather weak video card (Nvidia GeForce 6200) and I can't play games that ask me more on the video card (spiderman 3… ..)

  43. hello, I want to tell you that I admire all the work you do with tutorials, a lot of useful things, what I want to ask about this tutorial I have a nvidia geforce fx5200 video card, I did all the steps as it said in the May tutorial upstairs, I reached the phase with increasing the frequency, I gave all that to the maximum and I gave the test, the test once it finished told me that it failed, ok I wanted to go out and a border appeared with yes, no in which it told me if I want to save, I accidentally gave yes and suddenly it blocked everything I left on the maximum frequency …… I gave a restart and when it enters windows it crashes and I can't do anything anymore, please help
    thank you

  44. Andrei, those frequencies are rising gradually, don't give them to the maximum, it's no wonder that your data is failed. So be careful with the frequencies, the video card must be stable on those frequencies and it will take some time before you find them

  45. thanks for the explanation danezu

  46. Guess-Who said

    I admire what you do here..yes I also have a problem.When I play my pc shuts down, that is, my monitor shuts down and I can only do nothing..Please help me !! What can I do? You can find me on id spider_rapp .please… I have a video card 9600 gt 512 mb ..

  47. andrei21 said

    Mjto Sall site, mijto tutorial bv boys and I have a question one of you that sit in Galati facetii tutorials ???

  48. andrei21 said

    and to do and overclock for processors ???

  49. @andrei21: Yes, I don't think it matters! Don't tell me you want the address too !!

  50. vero23x said

    Hello I did these steps fro 4 times and each time I did not iesit.Dupa I finished all the steps these guys and restart the computer was giving me was to lock Windows and it reinstalez.Eu I FX video card 5500 256 128 bit ram know it because it's very old tile locks?

  51. Hi, I managed to "tune" it. I have an 8600 GT with active cooling and I put 590 with 490. how do you recommend to give stability test? to stress it to the maximum? or medium? how is it better and if it heats up too much during the stability test, what happens? can it burn?

  52. Adrian said

    @vlad: Have you heard of 3DMark? or Furmark? Type it up in Search on the right like this: "Simple overclock for the video card with tuning and testing the results with furmark" give enter and you will find the tutorial!

  53. straw to furmarc I meant, how do I recommend to stress stability test? I saw the tutorial and asked if it can burn if you give stability test and a maximum stress. I give benchmark settings with 590 490 70 board reach degrees and thought that if stress can also reach a higher temperature and can burn's my fear. Excuse me for asking but do not know and I want to aflu..am paid attention to some misunderstandings but I tutorial

  54. Adrian said

    @vlad: It depends on your PC… on your motherboard… when I did a harder overclock on my ATI card the PC restarted uma now I don't know what to say… it depends on what protection it has, what sensors you have on the board… even I don't know what to say… My advice is to overclock just so you can see the limits of your board so that if you keep it overclocked you will know that you will not get a plus in games !! because not only the video card is important but also the source and the processor, plus overclocking shortens the life of the component… it's like beating a horse with a whip to run faster! Overclocking is done to see the limits, not to keep it done and to go with it overclocked every day!

  55. aha, thanks to advice, yes you are right, only problems I have to do gta4 where the medium figuri..si will appeal to overclock only when playing the game a second time, then return to factory settings. I noticed that it's very important source, a current source to see how it distributes. Thank response again. all the best

  56. I have a video card and there 9500GT TEST..cum button to know before giving aplly button that's good enough and so up to move to FurMark?

  57. and yes I did overclock I have a question if anyone knows: I want to bring back plate to the initial frequencies but cun not know that I could do, I 7300 GT.Multumesc

  58. FurMark does not go to my board with nvidia getforce4 APG8X writes that supports: ((

  59. Hello! I want to know overclock is any plaque and if I overclock it or something poatestrica board are risks?

  60. Teodor: Hello! I want to know overclock is any plaque and if I overclock it or something poatestrica board are risks?

    You can not overclock even on any card and any component, first of all gotta make sure you have a good source to fuel properly components, and then gotta make sure you have some components somewhat good to bear overclock, and do it gradually, you need a little patience, obviously risks are everywhere even on components that support and are made for overclocking! About it will do tutorials have made patient!

  61. Hello…. I have the FX5500 video card and I followed steps as in the palm of my hand I am sure I ovecklocated the video card and passed the test… .it passed the test at furmark but after I gave a restart my computer crashed the mouse didn't work anymore it didn't work to access the layer nothing…. why ????
    But if you increase the video card and pass all the tests and computer off before returning everything we increased it locks in place longer ???

  62. I have an Ati radeon video card …… can I do the "ntune" test too?

  63. Danny: I have an ATI Radeon ...... I can do and I test "nTune"?

    Are you laughing at us? or…? Did you play the tutorial? Did you watch him to the end? It was said in the tutorial that this software is for nVidia boards, which part did you not understand?

  64. I GeForce 9400gt and does not appear in the control panel Test button overclocking. I like a slick Why are we given as drowning 100 any extra Mhz and saw a colorful screen that I hated escaped only after a restart mechanic. Then I took her up to 580 430 Mhz Mhz core bus and memory bus. To dare climb? Thank you in advance.
    PS You are very strong and not least useful. Keep up the good work.
    With respect Catalin

  65. And I would like an opinion. 9400 gt think nvidia card is a good choice if you want good performance in gaming. I want to buy and do not know how good the game is the 128 1 bytes and GB. Answer quickly. Thank you in advance

  66. Hello, I want to help me up, so I do not really understand computers and bne: therefore I want to help me too. I have a PC processor
    Intel Celeron D 336, 2800 MHz (x 21 133,), NVIDIA GeForce FX video card 5200-128MB.Vreau to know if I can make it a bit more performance with overclocking? Waiting for response urgen.va thank you very utili.Bafta further.

    • KostyHi, I want to help me up, so I do not really understand computers and bne: therefore I want to help me too. I have a PC processor
      Intel Celeron D 336, 2800 MHz (x 21 133,), NVIDIA GeForce FX video card 5200-128MB.Vreau to know if I can make it a bit more performance with overclocking? Waiting for response urgen.va thank you very utili.Bafta further.  

      Not to be mischievous or take me a bad name but in your place I would light a candle PC and I would thank beautiful as you go ... it works or how to tell it as is. I'm afraid that if you do an overclock to their "giving spirit" immediately, a jump in the air and dust will choose him. What you have is too weak to overclock.

      • Adrian: Not to be mischievous or take me a bad name but in your place I would light a candle PC and I would thank beautiful as you go ... it works or how to tell it as is. I'm afraid that if you do an overclock to their "giving spirit" immediately, a jump in the air and dust will choose him. What you have is too weak to overclock.  (Cite me)

        Do not take this the wrong way, I know it's a pc dust, but what can I do to make it a little Buna than it is now? Can you help me? Pretty please

        • Kosty:
          Do not take this the wrong way, I know it's a pc dust, but what can I do to make it a little Buna than it is now? Can you help me? Pretty please  

          Sorry, but unfortunately we don't have magic wands like Harry Potter and I can't help you more why it's posted here on the site…
          If both can both lead, you there you go.

          Write in the box "search on videotutorial.ro…" at the top right: system optimization or system cleaning or windows settings… enter and you will find the tutorials.

          • Adrian: Sorry, but unfortunately we Bachet magical as Harry Potter and I can not help you more than what is posted here on the site ... If both can both lead faci.Scrie not you have nothing to you in box "search on videotutorial.ro ... "from top right: optimization system or clearing system or Windows settings ... da enter and you will find tutorials.  (Cite me)

            Thanks for nice adrian tips and you're the best team we videotutorial.sunteti hottest new guys learn and ignorant of pc-uri.Va watching ever since I found YOU ARE YOUR MOST TARI.PACAT that Romania invests in something.

  67. Hello Cristi I have a petition of you to help me in my problem with the video card to know if a longer keep or be discarded.
    I have a Gforce 8600 GTS OC video card and suddenly my video card started making many squares you can not go see a movie or game, I installed the old deiver, the newest driver, I reinstalled Windows and all for nothing problem is as follows if you do not install and use PC without driver driver install is not just those squares moves reruare a normal driver if not installed.
    Pretty please help me and me to know what I have done is changed the board may fix ??? answer me please.
    THANK YOU

    • Yulian: Hi Cristi I have a petition of you to help me in my problem with the video card to know if a longer keep or be discarded.
      I have a video card gforce 8600 GTS OC and suddenly my board video began making foartemulte squares when I see movies or cant get a game, I installed the oldest various, latest driver, I reinstalled Windows and all in vain problem it follows that if no driver install and use PC without driver installed those squares is not only moves reruare normal driver if it is not installed.
      Pretty please help me and me to know what I have done is changed the board may fix ??? answer me please.
      THANK YOU  


      Your card is trailed factory, ie overclock thread manufacturer probably settings beyond the manufacturer has done in video card BIOS affected and stability on your system.
      The quick (temporary):
      NVIDIA nTune install and down the frequency to the forthcoming specification for graphics chip (basic specifications nvidia), we also have a tutorial with NVIDIA nTune. Also you can use to change fregventelor and Riva Tuner, it is slightly more complex than nTune but the settings will be preserved after restart.
      The solution of the (risky):
      Changing Parameters and refleshuirea its BIOS on the video card, this technique was used by the producer when he trailed plate.

  68. Thanks so much for your help Cristi but please explicami nice to me if I can I modify the BIOS parameters and with what program do not know ??

    • yliuta: Thanks so much for your help Cristi but please explicami nice to me if I can I modify the BIOS parameters and with what program do not know ??  


      Come as soon do a tutorial on changing BIOS video card.
      Warn you right now, this operation may damage the video card.
      I Exit I realize this tutorial because it's pretty dangerous method in this case is the protection of 0, compared update your motherboard BIOS.
      The video card BIOS flashuirea have to do everything perfect or hell goes plate.
      I will show you, I do so at your own risk!

  69. Hello again Cristi want to help me with a problem and think you sami u give the correct answer.
    I have a system configuration: Intel Core 6420 2.13 GHz, Mem 2.00 GB DDR 2 Source Intex 600W (it says but I'm not sure) and I bought a GeForce GTS 250 / 512 Mb / 256 Biti problem we intampinato is that when board mounted system starts when I hear that beep and the monitor shows me as if that message would be logged and I do not even look anything BIOS responses we have received are:
    1) Source small
    2) burned Video Card
    3) Not compatible motherboard and BIOS have ubdate
    The problem is that PC lam tested with another video card and works (less than 250 not like that GTS)
    I forgot to say and what I motherboard: Elitegroup 945GCT-M2.
    Please answer me so much to me and I say and what I do.
    THANK YOU

  70. I want to know what to do because I don't get that test and at mhz it's on 0…. My board is nvidia 7025 geforce

  71. Very good tutoprialul bravo to you guys!

  72. hello I have a video card sapphire radeon aty 4830

    and I made overdrive and put MHz GPU clock and memory clock 630 1100 mhz

    I did test custom clocks and said Passed

    temperature pa sit somewhere 38 39 to apply

    current values ​​160mhz gpu clock and memory clock 250 mhz

    Now the question if I did well and if it shortens her life thank you

    nice for everything you do

  73. Hi! Very good tutorial. I followed this tutorial step by step but I stopped at 'Adjust GPU Setting'. I don't see any value here, I have the value 0 Mhz both on the Core bus and on the Memory bus. I don't have the test button either, although the GPU Fans value can be changed. I have the ASUS P5Q motherboard, Windows 7 Ultimate 64 bit, GPX PCX XFX GTS250 ZDFC, RAM KINGSTON DDR2 KIT 4GB PC8500 1066 Mhz HyperX Black Edition and Core2QUAD Q8200 2,33GHz processor, Corsair TX 650W source. I installed the latest drivers, all software is purchased with a license. If there is a solution I am waiting for an answer to this problem here (OCla graphics card can go with another program). Thanks for everything you do.

  74. daciafan said

    I have a similar problem to that of PROEX
    I have a Leadtek 8600 gt TdH, asus p5kc, licensed Windows XP sp3

  75. stavreschi said

    Just do not make fun !!!!
    ATI Radeon for .. can do a overclock?
    For it is clear that what is exposed here apply to NVidia

    Smiles

  76. baptism said

    I put the values ​​given by Vlad on 8600 GT and the benchmark jumped to 1200 2300

  77. burabogdan said

    Hi everyone. I followed the tutorial steps by downloading the newest driver from nvidia. My video card is called Nvidia Gforce 8400 gs 256 mb. I installed the driver and after I restarted my pc, when it is about to display my desktop I get a border in the middle of the monitor that moves to the lower right corner. In this border it says "Out of Range"
    Anyone know what the problem is?
    Thank you!!

  78. Are there any software that can do a catch in games? if so please present it in a tutorial.Multumesc advance!

    • Adrian said

      Are there any software that can do a catch in games? if so please present it in a tutorial.Multumesc advance!  

      Yes, it is called Fraps… but I still advise you until we do a tutorial for him to learn English and read the documentation on their website or the Help file.

  79. dexter said

    hello friends as a great desire to tell me if I can make a hp laptop for procesors an overclock of the 1,6 or 2,8 2,2

    Model: HP Notebook PC Pavilio dv2700
    Processor: Intel (R) Core (tm) 2Duo T5450 @ 1,66GHz 1,67 GHz CPU
    Memory (RAM): MB 3062
    System type: 32-bit Operating System
    I have windows Vista
    Please wait answered here or e-mail [email protected]
    tell me if it's good or not and how and why fac.merci

  80. dexter said

    PS I would like to do overcloak only when uses some programs and games.

  81. radu petrica said

    please tell me what ram trb to take for an HP computer that has AGP slot on the video card. DDR1… DDR2 etc. thank you

  82. I have a shock queries related to your video card. I went 9500 gt my to fregventele they GPU: 620 mhz memory: 1032 MHz shader: 1610, the board is very stable and does not heat up bad temperature request has not passed 54 degrees with FAN to your 50% but also he normally does not heat. The problem is that I apply oc's only when I play using Riva Tuner and after I finish playing it back to the default settings, I want and I know, as soon as possible, if well as I do, or if it's well I set oc's not always when I play?

  83. Salut.Am and I have a request to you if I poate.Eu Mb nVidia GeForce5200 of 128, 1 GB RAM.asi like to know if I can run games such as Fifa 09, 09 PES or nfs undercover? Thanks beautiful and make a great thing with these tutorials.

    • Kosty: Salut.Am and I have a request to you if I poate.Eu Mb nVidia GeForce5200 of 128, 1 GB RAM.asi like to know if I can run games such as Fifa 09, 09 PES or nfs undercover? Will Many thanks and make a great thing with these tutorials.  

      I think that you could play FIFA and PES 09 09 board but that the low resolutions and minimum details, the Undercover doubt I would run, but who knows maybe I said above details and low resolutions. Now it depends on what processor you have.

      • Razvan:
        I think that you could play FIFA and PES 09 09 board but that the low resolutions and minimum details, the Undercover doubt I would run, but who knows maybe I said above details and low resolutions. Now it depends on what processor you have.  

        Intel Celeron processor I use Windows 2.81.aqm 7.si not know, you know better: therefore thank you and ask nicely voi.Va

        • Kostya:
          Intel Celeron processor I use Windows 2.81.aqm 7.si not know, you know better: therefore thank you and ask nicely voi.Va  

          The best thing would be to try the games, but to enlighten you better come hereIs a service that checks if a game can run on your system requires Java installed, Java google search if you do not have this program installed. But what can I say is, if you do not mind that your card (nVidia FX 5200), assume that it is the AGP is pretty weak in games these newer, so that you can play handcuff decent game you need a better video card and another gig of RAM (not required).

  84. I have a 9500 GT video card with 1 gb, MSi-k9m5pgm2-v2 motherboard, amd phenom ii x4 processor 945 -3,00 ghz, 450 W source could I overclock them?>

    • cristi: I have a 9500 GT video card with 1 gb, MSi-k9m5pgm2-v2 motherboard, amd phenom ii x4 processor 945 -3,00 ghz, 450 W source could I overclock them?>  

      You can overclock them do pretty casual, but not abuse. I got a 9500GT 1GB Galaxy shock and I did quite easily, but now depends on what source you like this matter to a board located in oc take some more, and voltages must remain stable.

      • C.Razvan:
        You can overclock them do pretty casual, but not abuse. I got a 9500GT 1GB Galaxy shock and I did quite easily, but now depends on what source you like this matter to a board located in oc take some more, and voltages must remain stable.  

        PS: When I said it depends on the source I referred to the deeds that source must be brand company in Romanian.

  85. I changed my video card and began to walk about 2 hours
    I closed my pc and after I reopened and tried to get into a game that I played in those 2 hours, after a few minutes was blocked and closed monitor (all), I left so any 2 minutes and restarted neagra.de but still image every time you get in a game or on the internet longer this happens to be restarted or when the computer open ICEP try to spin the fans but do not hear that ticking and not parneste
    I reinstalled the old card and went normal.
    I received respunsuri that they say could be due to the source.

    Motherboard: Asus P5VD2-VM SE

    Video card (old): NVIDIA GeForce SE 7300 / 7200 GS
    Video card (new): EAH2600PRO 256mb ddr2

    Processor: Intel Pentium DualCore E2160, 1800 MHz (x 9 200)

    Ram: 2 gb ddr2

    Source: X-gear 400W

    So what to think, it's the source? But the board has been used by a friend with the same source and he had no problems.

    Can someone help me ? THANK YOU!

  86. Adrian-admin please tell me, I have a toshiba satellite laptop A300D AMD tutorial x2 dual-core mobile RM-70 2,00GHz ATI mobility radeon HD 3470… Is it possible to achieve an OVERCLOCK ????????

  87. HeY. I Sall and is a NVIDIA GT 7300 Processor: DualCore Intel Pentium (R) D CPU GHz 2.80 2.81 1.00 GHz GB of Ram it going to do my overclock? who can tell me adyf29 ID or originaloriginal81

  88. I also have a question if I could overclock my proc amd sempron 3000+ 1.6 Ghz 1gb ddr2 (I also have a 512 dddr 2 board) and the motherboard is an Asrock n68c-s ucc what do you think… 10q snake_mihay id

  89. Careful with FurMark ala may even detiorarea components. Especially if you test on a laptop, you will notice that the plate will heat much more, and so much more will worsen running a game. These things should be done only on systems with extremely good cooling and even then should not be exaggerated. Better than investing in cooling component it her best and leave so anyway will come a time when new games will go only quad at least 4gb Ram

  90. hello I have a problem I have an AMD Sempron + 3000 1,8 1 g ram ghz
    how can I solve correctly all games go I hear is a program that makes all games to work, ie not jerky or what kind of game it is possible or not pls asnser

    • AdrianGudus said

      ovidiu: Hello I have a problem I have an AMD Sempron + 3000 1,8 1 g ram ghz
      how can I solve corecttoate games to go I hear is a program that makes all the games to go, that is not jerky or what kind of game it is possible or not asnser pls  

      I have never heard of such software in my life, if it had existed it would have failed distributors and hardware manufacturers…. No one would buy RAM and expensive processors or video cards…

  91. I leave somewhere to send sal til numa vez sam remember is called; :))) lol man

  92. Instead frequency to me after the restart not give it stays the same, I have a gf 7300

  93. Your sistemu concrete

  94. You can overclock the video card on-board?

  95. Ved 3DAnalyze try this and if you do not play great without great video card

  96. 3DAnalyze

  97. Emanuel said

    HELLO WHO CAN HELP ME SAMI MAKE ME AN EEPROM FOR GA-945GCM-S2C F4 THE BIOS WAS BUSY TEL 074 ……. Email “[email protected]"I have a black screen

  98. FurMark is a instalez` if I installed nTune without ???

  99. sklipy said

    A little TIP, related to the tutorial. I exceeded the "limit" and did not overclock gradually with said Cristi (My mistake) and I woke up with the desktop frozen. So in case you skipped too much with overclocking
    to the video card and wake up with the desktop closed and you can do nothing Do not BE AFRAID, do not panic follow exactly these steps: Restart, enter safe mode, uninstall the nvidia driver again a restart without enter safe mode this time and you will see that your desktop looks ugly without the video driver installed and everything looks useless but at least you can "walk" on the comp and it's nothing frozen, good now install the nvidia driver again for the video card do not forget to give the necessary restart and you have the computer as new 😉

  100. sklipy said

    A little TIP, related to the tutorial. I exceeded the "limit" and did not overclock gradually as Cristi said (My mistake) and I woke up with the desktop frozen. So in case you skipped too much with overclocking
    to the video card and wake up with the desktop closed and there is nothing you can do. enter safe mode this time and you will see that your desktop looks ugly without a video driver installed and everything looks useless but at least you can "walk" on the comp and there is nothing frozen, good now install the driver again nvidia for video card do not forget to give the necessary restart and you have the computer as new 😉

  101. I also did OverClock on the video card… I have Ati Hd 3400 Series… I raised it from 600Mhz to 720Mhz… and it works as if greased… more than 10 times! thanks app now my temperature is at 45G free when I go in place or something is at 50… I put 2 Culare on it 😀 not to be surprised that it heats up! Do I want a tip to leave it like this or….? Thank you

    • Tzesto:
      I did overclock the video card ... You Hd 3400 Series ... I got up from the 600Mhz 720Mhz ... and go like greased ... over 10 times! I thank app now stand 45G temperature at the pool when I enter the place or something is at 50 ... I've put myself 2 color on it :DI do not like surprises heats up! I want to leave a tip so or ....? Thank you

      After doing the overclock, you must ensure that it will be stable, this must stressing least video card.
      You can use FurMark for stress.

      • Cristi-admin: After doing the overclock, you must ensure that it will be stable, this must stressing least video card.
        You can use FurMark for stress.

        I told a friend that I overclocked to the video card .. and I told him that it works well and he told me like this: "you are fine now a week 2 3… at one point it wears too hard and it's not good" she suggested I leave her as she left the factory… but I wouldn't really want her to move better ..: D what do you say Cristi? Sall

  102. Marius said

    Hello! Cristi, I've been wanting to ask you what windows sp3 you use for a long time, I guess it's sp3 after homework and these… I've been looking for it for a long time but I haven't found it yet, I hope you will help me, THANK YOU!

  103. Cristi is so much I want to ask you the same thing about Sp3 plss Your answer: ((

  104. Laurentiu said

    YOU ARE A GENIUS ! I go perfect

  105. Hello Cristi Alex and I'd like to make you a proposal for a tutorial:
    Overclock for an i5 2500k or i7 2600k (show all the steps to be taken) .. and a tutorial about ram memories (eg I bought a kingston memory at 1600mhz and it actually works at 1333mhz (I also consulted everest and more programs) -> I understand k to work at 1600 I have to overclock it)

  106. hi ami not caseste video card that is correct resolution and appears 1440 900 × × native 1024 768 please help ... ..

    • AdrianGudus said

      par:
      hi ami not caseste video card that is correct resolution and appears 1440 900 × × native 1024 768 please help ... ..

      Uninstall driver from the video card control panel, restart the PC and give you back, re-install Graphics Driver

      • I did so much thanks goes well Adina now the norm! vitor as possible to further INTP?

      • AdrianGudus: Uninstall driver from the video card control panel, restart the PC and give you back, re-install Graphics Driver

        I did so much thanks goes well Adina now the norm! vitor as possible to further INTP?

    • everest seeking a driver for your video card and you're going to

  107. hello to me on the video board goes nTune is geforce9500gt 512mb / 128bit nTune why not go?

  108. I have a problem

  109. I have an Asus GT 440 1gg ddr5 ovarclaging and installation Sidi enlargement draivar they have a factory and it is not know how to increase me who know tell me how to do

  110. florin lazar said

    May brothers, I am not opened nvidia control panel with advanced settings! Why? I installed the driver with the option advance, yet there are no advanced settings! help, please! I have an Athlon 64 x2 dual core 4000 +, 2.11 GHz 1GB RAM.
    thank you in advance

  111. Hi everyone, I have a problem with your laptop, like every day at least once it turn black and display a message such as graphics driver encountered a problem but recovered successfully after last driver who revine.Am installed, even I uninstalled it and installed again trying to make this overclock, but here I encountered a problem when installing utune get on to 80% laptopul.Laptopul is a compaq I freezes and Nvidia gforce 900.
    Very useful site, further luck and success.

  112. edy:
    Hi everyone, I have a problem with your laptop, like every day at least once it turn black and display a message such as graphics driver encountered a problem but recovered successfully after last driver who revine.Am installed, even I uninstalled it and installed again trying to make this overclock, but here I encountered a problem when installing utune get on to 80% laptopul.Laptopul is a compaq I freezes and Nvidia gforce this site useful 900.Foarte , luck and continued success.

    This probkema I had and I tried to reinstall the driver but in vain, after I restored a backup.
    Probably a bug in the video card driver, try to uninstall it after installing an older one.

    • Cristi-admin: This probkema I had and I tried to reinstall the driver but in vain, after I restored a backup.
      Probably a bug in the video card driver, try to uninstall it after installing an older one.

      Hi Cristi, congratulations for the site and tutorials. I have a problem with the motherboard msi radeon x1550 512 Mb, core and memory frequencies stock is 350 / 400.Am overclocato to 500 for each 0.26 ATITool and I tested it with furmark.Dupa time using Everest I saw that card is no longer 512 but 128 Mb. motherboard has two memory chips 128 / 256 think went 256.Rezultatele the data are the same and everest on windows xp 7.Se can do something? Yet her performance did not decline

  113. Hi, I have a gforce fx5500 video card. and with furmark, I have fps 1 max 4, new drivers, and ovarclokata… .can someone help me..what is the problem ??

  114. Hi guys from videotutorial, are very strong. I have a problem with the video card model msi site x1550 512Mb.Am found a tutorial on ntune.Dupa nvidia overclock but searching the net I found two software ATITool 0.26 and Atitraytool, using first because it's simple and easy to folosit.Nucleul standard plate is fixed 350.Am 400 and memory in high frequency to 500 for each plate and tested FurMark getting a much better score than did the settings standard.Am right to play on crisys 2 with all settings at minimum, with stock settings failing to come even from Everest using submarin.Cu another occasion, I noticed that the board was not 512Mb but 128.Pe system board has two chips 128 256 memory and mb. believe he's gone the 256.Se can do something? mention that they have low performance

  115. Sorry for double posting is the first time they use the website of

  116. an addition: MSI ATI Radeon x1550 has passive cooling but iam attached a cooler and stays cold case

  117. videotutorial rules

  118. Hi all. that comes is in this tutorial about overclocking, although it is not about processor overclocking, I also have a question… does anyone know a processor with socket 775 (preferably a quad core at a more reasonable price) that can also be overclocked from the multiplier, as on my current motherboard I do not have the option to overclock the clock or bus frequency, but only the multiplier setting… currently I have an ASUS P5N73-AM motherboard… Thanks in advance…

  119. I have an Acer Aspire 5742ZG with Nvidia Cuda 420M of 1 gforce GT gb dedicated and I do not go nTune

  120. Marian:
    I have an Acer Aspire 5742ZG with Nvidia Cuda 420M of 1 gforce GT gb dedicated and I do not go nTune! I am waiting for an answer..

    My opinion would be to stay calm and not try to overclock the laptop… I have an Acer 5750G with nVidia GeForce GT 540M video card of 1 Gb on 128 bits, and when I play NFS The Run it heats up very hard… enough even at 85 degrees, and the processor, an i5 2410M, reaches 95 degrees… imagine what would come out if I overclocked… I've had my laptop for 6 months… I want to buy a coolerpad soon to buy them I prolong my life, because I honestly don't want it to burn or suffer anything else in the near future… overclocking is for desktops, and there it depends on what components you have and what cooling… It's a piece of advice that is worth considering … I hope I helped you… Good luck

    • Ms, I also noticed the laptop heating thing, and I have a Canyon MiniStand cooler! and I can barely control him, but I was curious to see if he could do something… thank you very much for the advice 😉!

  121. I did overclock the video card, but the problem is that I do not stay that way after restart recovers to factory parameters although I gave APPLY. Puta that would be the reason?

  122. balysstic said

    I would also like to know if I can overclock an "Intel HD Graphics 3000" video card on board?

  123. Overclock a VIA S3G video card too… Please.

  124. Do not let me walk to the GPU fan to adjust temperature settings can someone help me .If

  125. I have a problem .. Getting blue screen when I want to give Accept End User License Agreement. .. ? why?

  126. I raised myself frequencies than the video card, but after the restart they give back to factory settings. I stressed mention it, I played and was stable where it had gone. My question is why change settings after giving restart?

  127. Hi, I have an intel 3.2 dual core processor, nvidia 9500gt 512mb video card, 1.8 gb ram and a pretty big fan. What could I do OC without "frying" that component.

  128. I tried to do that but when you go in there to setup Nvidia gives me ecranu erroarea with alabaster and restarts and write something like nvrokl.sys can help me?

  129. Hello, I have a question and I hope someone help me !!!
    I think the problem is the video card, the 2 days grrr I remove a strange sound, like half a second cricket ptr overload the computer and when that time is and blocks, like open photoshop, go into a game and if I look videos on You Tube to 720HD! Does anyone know what may have, you have to change, gave something?
    I say normal temperatures, the CPU and the GPU I 64 degrees all 64 degrees
    Thank you!

  130. I can not wait to try and get me and I eu.Maine the new video card Gainward GF210-1024-HDMI-DVI, you say, would be to try an overclock bn on it?

  131. X1550 on how I can make you overclock ??

  132. hello, I have a problem with him and basically this tutorial I do not go I start the computer desktop appears after the place closes what to do? I really do not know what to do .We ajutatima

  133. I did overclock the video card, but the problem is that I do not stay that way after restart recovers to factory parameters although I gave APPLY. Puta that would be the reason?

  134. Hi I have a video card amd radeon hd oc 7850g 2 256 stemabai bit and went somewhere in temperature-70 80 85 degrees and degrees is normal game so when I took it went normal after months 4 go up and I trimeso parameters to FAME by acolao I took it I did well or not I trimeso. thank you response wait

  135. Hello Cristi are the hottest I love your tutorials. I did as you said. I installed nTune but after go figure Agree nvidia CP and when I go to settings I bloacheaza laptopu erroarea this system exception error occurs (nvoclk64) and sal closure should remain locked i have a asus laptop and Inte i5 procesoru of 2.30Ghz scheda 520m a Nvidia Gforce Gt if you can help me how to make it without you I can overclcka deie ms erroarea top that I can send an email here [email protected] Succi respect to future

    • If you have several slots on the motherboard (directed video card) you can buy a plate of the same example. GTX 650 1GB and take another card too. But if you laptop do not think you can do something.

  136. Good evening !
    You can increase the RAM on the video card?
    Thank you !

    • If you have several slots on the motherboard (directed video card) you can buy a plate of the same example. GTX 650 1GB and take another card too. But if you laptop do not think you can do something.

  137. AndreiDita said

    I have a question when you get into games that are slightly off the screen and after that each recovers

  138. ceau. I have a question, I played and the game crashed. PC makes fan noise at maximum if I uninstall the driver from the video card, it works, I have nvidia, do you have to replace it, do you have an idea

Speak Your Mind

*