Hi friends, in this video tutorial I will present a wireless router extremely cheap but very good.
Our star today is TP-Link TL-WR740N a wireless router that emits B, G and N but (150N).
When I pulled it out I never imagined it was too capable but when I plugged it and I put it to work I was amazed at that price?
The administration interface is extremely well organized, is on everyone's taste, the left have submenus, the setting is in the middle and on the right is where we find the help-each time contextual explanations very clear.
This router can be set in seconds, and laptop computer were connected very quickly.
I must say that in 2 meters from this router is a D-Link DIR 655, I did not feel any moment any conflict, I must say that D-Link is a router 5 times more expensive, TP-Link CPC did not feel intimidated by strong signal no second D-Link.
I took this from one router to install it on a router firmware after market that turns out one of 90 lei a perforated router 3-4 times more expensive, all without any extra expense.
In the tutorial below we passed quickly through settings that and we have shown what's important, I presented all settings so that they will not use them anyway anyone.
Soon I will make a tutorial video with DD-WRT firmware on TP-Link TL-WR740N, there likely will insist more on settings.
Router shown in the tutorial.
Wireless Router TP-LINK TL-WR740N, Wireless B, G, N
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 500 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.
Instructions for use videotutorial.ro
Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.
Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.
Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !
by Cristian Cismaru
About Cristian Cismaru
Oops Cristi bv
Cristi Hi I bought myself this Router TP-Link TL-WR740N, Sant ff pleased with it but I can tell Sam to realize two network this router but with different names give one another and where to go to do that Thank you very much.
if you learn grammar, I'll explain!
Sant = are!?
sam i = to Me?
I net from rds but I Addicted little strange meaning I owned a kind of modem square connected to the wire cable and netul I can through wire cable Miar longer have such a rooter I had a net faster or just as Besides paying extra subscription from rds will buy and Rooter?
A router or modem does not have the role of increasing the speed of the internet. On wikipedia.org you can find a definition of what a router and a modem do. The router helps you to better manage the "" signal from the net, to distribute it in several places while a modem has the role of transforming telephone impulses into dial-up internet (These are just short definitions and for your understanding but the explanation scientific is more complex and with more details)
bv I think I take it and I better is a USB stick wi-fi? as nush at the price it's cheaper sticku 'please answer me WALK!
Have you been to Shakira and you put wakawakaeee password :))
I was at the concert, passed it on to me after the concert.
Yes wireless router is interesting and I am an older one from TRENDnet of 54Mbps, but it's weak, ala TP-Link was nice if you have Mbps 300 150 not be the most direct 300
Hi friends. Scz I'm leaving my ad here but I don't know exactly where I can say my job 🙂 I have a short question for you and I hope you can help me every time, Is there a setting for Windows XP to put some kind of protection to the CD drive so that it only reads the original CDs? .. More understandable. I have a laptop that I can't read pirated CDs… dak I put an original cd in it it takes without proof but dak bag any other pirated cd reads it to me, it tells me that I have a cd there but it doesn't see anything on it , at the properties I have a ke ke and I don't know what I can do to them sc Thank you and I'm sorry for the inconvenience 😀
Or see what reading speed the CD-ROM supports… maybe pirated CDs are written at speeds too high to be read…
It might be interesting and often tutorial [pre Access Point's, us know how to set up, why should we in the house, and I know they do in addition to a router.
dd-wrt?
I have exactly one year. I took $ 20 from one type (brand new, only without collateral) and go without reproach. Not even a small problem I did in a year. He certainly worth the money
Cristi and I saw this router when rummaging through emag and when I saw him I did not believe it. Actually I wanted to cut my vein Ron difference between Dlink Dir 30 600 you buy me and it. If you have Wireless N Full, we take.
Later Edit: I think you did yesterday tutorial, because I recognized the logo of google with the anniversary of something. Yesterday router was 91 lei and was in stock today reached 95 and stock is limited. :))
http://qrcode.kaywa.com/img.php?s=5&d=Imi%20place%20ce%20faceti%21%20Tineti-o%20tot%20asa%21
tell me what I have got cable to connect the PC and router ??
SORRY BUT WILL ZIC you said you do not want tutorials BE DOWNLOADED THEN WHY YOU TUBE leat put on ??
OR IS AVAILABLE ONLY TO CHEST PT VIDEOTUTORIAL The site OTHERS THAT RESPECT YOUR SITE go well with them?
Not that I HAVE ANY DATA DOWNLOADED FOR YOUR NEED THEM MAY SEE HERE SIMPLY THE SITE do not understand why people are trying to download them!?!
UTP cable, but most often, if not every case the box is such a cable router, the 1m but so little about.
I bought TP-Link TL 1043ND I gave him 230 and Ron are super pleased with it so far, we have a month and works perfectly without restart or signal failures, and the first day in which him I got transferred from PC Laptop, approx. 50Gb data nor budge went all the time with Mega 1,74 per second for several hours, and all the while surfing the net without probleme.E more than double the price from the one presented in the tutorial, but the menu it is exactly the same, and the difference does that go to 300Mb and has 3 3dB detachable antennas each. I recommend it for those who want a good router.
Why filtered comments?
We do not "filter" any comment, we filter the unrelated comments, like the one you gave earlier, in fact it was a link not a comment.
Try not to put links, if absolutely necessary to put a link, put it in quotes not to be active.
We have nothing to anyone, there are some general rules that are being applied.
Sorry you did not even see what was clicking on that link, it was just a QR code
I found your comment to spam a little later, I posted out there and look above!
Beautiful
Thor? How can I check the read speed is the player? .. I looked at myself in the Control Panel settings but we found nimik
Bai Cristi, the VRO month since you left quite a soft all tutorials about rarute topics interesting when you did not really ... I hope not to let the izbeiste site!
All the best!
First think your way of expression is not to be, secondly tutorials that we do, we do for pleasure, we do something industrial, when we have a subject we like the nice tutorial, we do not have subject or do not provide.
Do not post just for the sake of traffic, posting pleasure.
Each tutorial is a pot, a film, a kind of art.
When I have a contract with someone likely to post a 3 day until then we are free.
There is no way to do tutorials super hard every time you tie seems boring to another can be pure gold.
USUAL with us or search for alternative, that's us: free, bohemian, ..., ...., Most often we turn out well, because we are free in thought.
600 videotutorial.ro are some tutorials, I think you saw them all, I do not think we've seen, all are made of pleasure with a lot of heart and passion.
PS
RESPECT, that word says something unfashionable?
Cristi, please once again, give money to this fool who signs "BGD" that he pollutes the air on this respectable site.
You have all my respect!
Sometimes more demontizi cite something and tell us the tutorial, please show this and some pictures. Thank you.
I was thinking to film but I think it's easier to make some pictures.
I promise you that next time to unfold before you.
Hello,
very good tutorial. Even today I bought this router, and please, if you can keep going with the settings you can do it. It is very good what you do and you multumesc.Am learned a lot from this site.
Unfortunately, I notice that lately doing very brief tutorials on topics that most of us can find ourselves.
I see there are some who comment on this site and are not happy, so is the man (or novel) is never satisfied and do not appreciate the fact that this site can learn many things and everything for free. If you do not agree searching the forums answers to your problems and you will see that you just swearing or part of some who take you to cool or others who ask you for money to tell ceva.Ar have to thank the people of videotutorial.ro to do such as tutorials and learn as we Romans something that we 50 years ago from other states. For me videotutorial.ro is nr.1 website, find almost anything here, what I'm interested in IT and even videotutorial team because I made a website (I do not want to tell her name, I do not want to do my advertisement) .Watch made video tutorials and team videotutorial satisfied that there is such a site, whether some tutorials are good or less good. I have all respect for videotutorial.ro team and thank them for everything they do .Are the best!
Good luck !
Good and useful tutorial about 2 months because of so and I am a TP-LINK TL-meow mr3420 and helpful explanations about the functions of the tutorial because this is my first router so I do not have experience in this field
Hello and congratulations for the tutorial.
You can do a tutorial on configuring an AP to a wireless router to expand the range.
My question is whether a router and an AP behaves like a single network or when out of range of the one I need to connect to each other.
I want to extend a wireless network with some APs, but I want to be a single entity.
If you said above in the search box right on the black edge: you have given access point and enter you have found the tutorial. are almost 600 tutorials on the site, you just need to search them. You can search with the words: "Set up wireless connection between a router and an access point" you enter and you will find the tutorial.
I watched it when it was created and now again as I care to put into practice.
Urmatoruul thing I do not understand:
- if I am within range of two different wireless networks, they appear in the list of available relays and I connect to the ones I want.
- if I have a router and an AP connected by wire (obviously each with its own range and a common intersection to cover the whole area) I will see two networks or just one.
From my point of view it would be normal when out of range of the router to get into the AP without giving again connect.
I experienced nuam practical and would not want to waste money.
In short: does the router and the AP form a single wireless network? Special settings must be made for this - ie have the same SSID, the same security rules?
Thank you.
Greetings to all!
Hi Cristi, I need your help, a day ago I bought this router with so many qualities, I smiled at the price… but I don't know what the problem is… very weak signal, distance 2 cameras :( on windows xp it connects me with 2 lines and 48 mb and on windows 7 it shows me 4 lines and 48 mb signal: D
If I put it in the attic of the house where I have the rest of the routers… I can't even connect to it: | any solution?
I also have modelu TL-WR543G is also highly praised: | But the same problems: | bad signal.
Thank you: D
and I am in exactly the same situation as you wait for Christ to answer your
hint: if you have other uses separate channels wi-fi routers in area, or pore be interference from other devices through the 2,4 ghz. google is your friend: D
I have an ADSL modem from RTC model Huawei SmartAX MT882. What should be setting to work with this model TP-LINK TL-WR740N. Easy Setup Assistant that I run and get the following error message: Please check the WAN Connection type and parameters.
To have a net and through TP-Link you have to make sure that you have a net from the ADSL modem, and that the modem and the router are connected correctly: in the back of the ADSL modem you have the “ethernet” port, this port must come out a cable that goes into the "WAN" port of TP-Link. Then you make sure that the devices do not have ips in the same class. If there is no problem of ip conflict, then TP-link must be configured with ip dynamically, eventually you will need a poppy clone at TP-link and it has to go through the net as well. broadly
See that creates a conflict between Huawei's IPs and tp-link.
Change your tp-link from the 192.168.1.1 192.168.10.1, be careful when you access the router then to put the new address 192.168.10.1
To avoid the conflict I put the address 192.168.1.2 to the router, the error being the same…
192.168.1.2 is an address that uses DHCP servers of both devices, you changed a shit, do you put you and 192.168.1.106 degeada, all in Class IPs that you spin
I said I clearly put 192.168.10.1 not know why not follow the advice, we know something we do not just talk shop, we're at work.
After you change your TP-LINK router let the dynamic ip and ready.
Do not be stubborn!
To understand:
192.168.1.1 is the address of the modem router but in a Tetea can not have two devices with the same IP address or DHCP server use the same class.
It avoids the conflict need to change the address of one of the devices and the default will change the dhcp server and disjointed class. Not to confuse the modem Huawei is recommended to change the IP router tp-link.
PS
If this time you enter the address 192.168.1.3 or 192.168.1. "Any number", they come to you and break you in a fight 🙂, you do not understand that it is important to run away from the class of ip that Huawei uses ?
Halloooooooo ....... put the address 192.168.10.1 at tp-link and you will not have any further conflicts.
I stayed mask after I searched the site and dd-wrt this model is supported under 100 lei, I'd be curious how it behaves. I found almost 4 times that amount on a router to a more brand praised only be compatible DD-WRT, STABILITY the main criterion for me. I think I will buy backup
Dd-wrt ready I put on wr740 and go now who can help me with settings that I'm not good
I have the same problem with Dtz, I realized I had changed class ip, my question is how or where a change ... thanks.
Pixy
LAN Settings of this function in most routers. In this case, the router submitted, you will find the Network function
I bought one and it 741 wr2.4nd version with original firmware, wireless and over 80m keep in touch, but one that I bought it the first time (wr740n) goes to 10m
I put on wr740 dd-wrt and I do not like the original firmware can put in place to send him back he's warranty
In connection with firmware updates when a tutorial promised to do?
I bought this router and I have some trouble connecting (Contact RDS), that should keep him permanently connected to not have problems reconnecting. I hope that through firmware updates that may resolve and my problem ....
What do you mean "I have to keep it permanently connected" ??? Do you unplug the router at night? Man… consumption is tiny… lasal in the socket! The router is not a kitchen mixer, it has no motor… it must not be unplugged!
That is, at the network-wan connection mode-connect on demand option (set to 0-this means continuous connection). I tried to put another value (ie 3 min) and when I connect with the browser the connection is very difficult. And of course I don't take it out of the socket at night cum If anyone knows how it should be, please let me know too….
dd-wrt not put it that has bugs in beta
let him not from baseline to me was to 15 min and I go perfectly rds
What settings should I do to get connected utorrent?? more please! and how do sami occur to me that tie utorrent UPnP?? Regards!
I took yesterday. Cristi Thanks for the tutorial. I 5 configured in minutes, going razor.
what program can be used for AAFL if someone is connected to my wireless and unlink them as his asputea
This router can be used to connect me to another wireless router? ie wireless bridge supports?
Yes, it supports wireless bridge…
I documented myself about this router. the conclusion is very capable. Mr. Cristi look forward tutorial about upgrading to a custom firmware (I suspect it is a DD-WRT firmware) and I would be interested in how it behaves
I have an Edimax router that I have a Fast Ethernet net from RDS 5 MB, and me just remove my router 2 MB, why are you so and I do not give out direct 5 MB / s, has a limitation that. Or seek professional CISCO routers or SYSCO, as I advised?
Hello, I have a router TP-LINK TL-WR740N, but nothing like the one shown to you in the tutorial.
Looks like this one here:
"Http://www.price.ro/preturi_tp-link_tl-wr740n_246898.htm".
I am very pleased with him and I would like to know what the differences are between that I am me and one that I've shown you.
What have I not (still) not found on the official website. Firmware update can do with what's on the official website of TP-LINK?
Thank you!
salut.la installer will not let me move on to network adapter should download a newer driver?
I did it
salut.la a power routeru goes and I need to start again with setarile.cum I could solve the problem? the rest is ok.
you lose cloned poppy, poppy returns to original
Ionic and that how do? poppy writing PC to the router, or vice versa? intredevar see that not correspond
What year I said is true only if your provaiderul filter Internet access by MAC address of the network card, or you have not properly stored settings
how can I make my own wireless network share?
is useless to install a software firewall router if we in?
super good tutorial. I've listened to his advice and I laut a similar model. go super well. thank you
Hello! you could tell me exactly how many dBi is antenna? the EMAG is the pcgarage 3 5 and elsewhere have seen 5 thanks!
The router has 5 dBi antenna. At least that is mentioned on the official website in the router manual.
nobody even explain how it is with me macu know mac and pc has routeru has? the settings that remain?
It was explained in the video tutorial if you have forgotten head-tail, use and what about Mac.
If the setting used for authentication in your net provider network is via the NIC mac of your PC. That usually happens before the district providers. Now I have gone about this type of authentication. RDS If you do not need authentication by the NIC mac.
I bought myself this router model from emag today. But I have a misunderstanding: if you shut down the power button on / off, restart Internet is not working. I need to give reboot the router System Tools menu. So it's happening to you (those who own the router)? Please answer. Thank you!
Install DD-WRT on it
I installed dd-wrt not on him not to lose the warranty, but I see that no more trouble
Marius L have the same problem if I .cred fix announces it's something macu
I think the issue is resolved, I do not know exactly how: D. I can tell you I did update the firmware version on the official website tp-link, even after I did the update I noticed it was the same firmware version to the one that was installed on the router. So I do not know to what extent has helped this process. Regarding MAC router, I cloned myself to be identical to the PC. Now close it, and unplug it when you do not open again no problem. But another thing I give pause: I notice it after a while about Heat router. The same happens to you?
Marius L cloning as you did briefly tell me if you can
Enter the router in your browser settings. Then select the Network menu on the left, and then MAC Clone submenu. There have Clone MAC Address button. You press that button and then Save and ready. But you should know that you can not clone MAC, if your net retailer relies on MAC's registration. At least to me like it and had to call the dealer net change my MAC with extras from them. But no one answered me about warming :( router. The router is my cam Heat after a while. In yours just happens? Please answer me! Thanks!
Heat is not mine but simply burn the bag into the wall after you take about ten minutes. I beat a nail in the ceiling and hanging above me fear sal lam tin on masa.atarna there so feel there is nobody goes ruter.clonarea think you have the same problem as net cablelink1 modem from rds.
Folks, you are the top! It's also normal for your uncle to get hot, because it's just a router, it has a processor, memory, it has to manage the bandwagon very well, especially if you get a net of 4 devices like my case. What are you whining about so hot? That's what it's made of, and the video card heats up, that's why it has a fan on it, and the processor heats up and that's why it has a fan on it, and the RAM heats up… what do you want them to do since it runs through them? , since they have to process the data?
Put your goggles, the big thing is to use grinders, lest you blow in the eye router.
You go figure!
I recently bought myself this type of router, but the more expensive model TP-WR1043ND port usb.Am attached a stick, and tried to see if the files on the stick can be seen in retea.Sant a bit puzzled that the stick does not seen in the network (in my computer or somewhere network), only when I access the ftp protocol see files on my stick.Intrebarea is it normal to be so? I should not see straight stick hard as a network?
I made all the required settings according to the user manual (share… etc).
How would see if I attach an external hard drive? Just ftp protocol I could see the files on that hard?
Thank you
Please make a tutorial on this router but you ClickNet connection from romtelecom.Mi and I've got a router but not connect to the net and we did not exactly setting to be.
@Cristi: Very useful tutotialul. I want to ask if it is better DIR-600 girl presented router comes with something extra? I saw that on emag bought the router DIR-600. Thank you
Hello. I bought this router, I installed it wirelessly, it still works perfectly excellent signal but the videos on youtube don't work, the videos on any other site work ex. "Videotutorial.ro" but it doesn't work on youtube, it shows me that the video is loading but it doesn't start, and if I put the cable from the internet directly into the laptop, everything works, so the problem is from the router. I want to mention that I have a net from rds, thanks.
Hi, Adrian! I want to tell you that I had a similar problem. I mean: after I set up the router some sites didn't load, like yahoo.mail.com and others. The problem was from MTU (Maximum Transmission Unit), its value being set by default 1480 to this router. This value is too high for some sites. I changed the value to 1472 and the problem was solved. You can change this value from the router menu: Network-> WAN. You will find here, next to the Save button, the Advanced button. Click Advanced and there you have MTU Size (in bytes). Try setting the value to 1472. Don't forget to press the Save button after changing the value. If it still does not work, the value decreases from 10 to 10 (eg 1462, 1452 and so on). I hope your problem is solved. Please tell us what the result was. Good luck!
I changed the value but it still does not work.
Salut.Am and I have this router and several PC connected to it, I wish I could go to the settings on a PC's just how I can do this, it is that possible ??
Hi Marius,
The router can be accessed by typing its address from any PC connected to that router, what you can do is change the username and / or password… for example you can leave the same username: "admin" and change just the password.
Example: When a user who uses that router will type the IP address of the router, you have to input a username and password if you can not go wrong button in the router menu.
So you put your username and password on the router and anyone entering the router address can not make changes unless you know the username and password router.
I want to contradict you Vasi. You can set the router menu to be accessed only from a PC. In the router menu, at Security there is the Local Management submenu. Here check "Only the PCs listed can browse the built-in web pages to perform Administrator tasks" and add the MAC of the computer from which you want to configure the router. Thus, only that computer will have access to the router's settings.
AND I bought this router SI and did not connect all settings namely those LEA have done if Romtelecom's net VOI.Am is this a problem?
Hi Marius,
Romtelecom modem to go on the same IP router, ie 192.168.1.1 ... only connects first free modem router and change the router following menu:
Lan -> IP Adress: 192.168.2.1
Subnet Mask -> 255.255.255.0
Wan -> IP: 192.168.1.3
Default Gateway -> 192.168.1.1
SubnetMask: 255.255.255.0
Wan Connection Type: -> Dynamic IP
Wireless Settings -> Region-Romania
, Saves the settings and then connected again Romtelecom modem router, type the router's new address and then continue with creating 192.168.2.1 router connection.
Dynamic IP connection is made.
I made these settings but can not change manually Wan parameters are only automat.Il 2 weeks and I still can not I connect to net.Multumesc for understanding
Can anyone help me somehow I made it this router OPERATION ??
Thank you all.
Marius listen here how to do
1 you return to the factory the router menu submenu SYSTEM TOOLS FACTORY DEFAULTS
2 laws port LAN cable modem router's WAN port romtelecom and router NETWORK menu submenu instead of IP LAN IP 192.168.1.1 192.168.20.1 do not forget to save that's all you should go is very simple
I gave everything goes, I'm tired, I feel like dying.
Hi Marius,
I tested the settings sent above on my TP-Link WR1043ND router, with these settings my router worked on net click from romtelecom…
The TP-Link WR1043ND router is produced by the same company, I think the software has small differences compared to the TP-LINK TL-WR740N, I have a net from RDS, but I use the router on Click Net when I go to the country, I have the saved settings… and when I go to the country I just give Backup and Restore, from the router menu, I choose the file saved on the computer and I load the Click Net settings, then when I return to the city I load the RDS settings also through Backup and Restore. And everything goes perfectly.
If you send your email settings saved my file Click Net.
Send me an email at [email protected]
Downloadable tutorials on this site?
NOT! I do not agree with that. Our content is created by us, for which we have worked in your favor. It is enough that you have access to these tutorials in HD for free 24 24 hours 7 7 days.
We have every right to decide what, who and what has access to these tutorials. Respectatine work!
I agree with this and will respect for all faceti.Am want to download this tutorial to help me with this I set my router while they watch tutorialul.Pentru that when I connect to this router I have no connection net.Multa luck and success in continuare..Eu honest about almost everything I learned from you pc.
Hello,
Staying in a hostel and use the internet PPoe with username and password at the university.
I followed your tutorial and bought the router in question (TP link WR240). I installed it following the steps in the manual, with CD and Easy Setup Assistant. Everything went perfectly, as long as I had the router connected to the computer via cable. After I removed the cable from the computer and tried to connect "wirelessly", I failed. The computer went wireless, I successfully connected to it, the signal was excellent, but I couldn't connect to the net and only "local only" appeared. On the other hand, my roommate connected seamlessly to the same wireless network on a phone.
So I can connect to the internet, I need to connect a cable between the router and computer.
Do you think I have a chance to get conectey and wireless (as I just bought this router, and [rid of cables)?
Thank you for information and tutorials. I learned a lot from you!
All the best!
In connection with port-forwarding ... since I bought this router, I can not realize anything uTorrent ... so I started looking for the cause of the problem. I looked at your tutorial about port-forwarding, I tried and did not work ... really I do not know why! Port Triggering eg, I utorrent the Common Applications and Virtual Servers I did not even go ... Ideas?
In Router walk for nothing, I have one just like yours and I do not have it setup in uTorrent go to site. See lest uTorrent is not blocked by Windows Firewall or security suite that you have installed
I must disagree with you, Adrian. No me did not work properly uTorrent and dc ++ after I installed the router (Download at very slow speeds, and upload to not mention). After doing port forwarding, I had no problems. I set 2 ports for dc ++ and one for uTorrent. Robert, to run uTorrent normal parameters you must do the following:
1. Open the utorrent and look at which port it uses in Options -> Preferences -> Connection. Ai there Port used for incoming connections. Copy the value from there.
2. Enter the web-based application of the router. Go to Forwarding -> Virtual Servers. Here press the Add New button. At Service Port you paste to set the value of the port used by the user. At IP you put the IP of the computer you want to download with utorrent. It is good to have the IP address reserved for MAC (you can also do this from the router application). In Protocol select ALL, in Status -> Enabled. Then don't forget to press the Save button. It should work now (at least it worked for me 😉).
Please tell us what was the result. Good luck!
By default the router comes with uPnP enabled, if not as grasping walk in it and do not do all sorts of bizarre settings and Windows firewall is disabled, it is not necessary to May Needle nothing like uTorrent is to work.
You contradicted me broken in half ... you gave me on the nose ... (I hope you noticed the sarcasm, right?)
Search Wikipedia pa` `means uPnP and then come to contradict me ...
But did you think that some trackers recommend unchecking "Enable UPnP port mapping" on utorrent? And in vain has the UPnP router enabled by default, if you unchecked that setting. In this case, you need to do port forwarding. So ...
No additional settings should be made on the client unless you can put "Global maximum number of connections" or "maximum number of connected peers per torrent".
The rest of the settings mentioned by "specialists" on private trackers are not necessary, they have a SINGLE and SINGLE purpose. Do not shoot from sources other than their own and do not shoot others from you if you have something to seed unless they have an account on that tracker.
Also for Mariul L, I recommend you to watch our tutorial on "Increasing the download speed, upload and the number of connections in uTorrent" which you can find using the search box on the top right. Those are the only settings required by the uTorrent client. The rest of the options that the "specialists" or administrators on the trackers tell you to do, have nothing to do with the higher / better speed but with the fact of keeping the tracker as closed as possible, so that no one can download those who have an account on their tracker
That's it, it's over. I don't know how, but it worked out. I made settings and settings all night but it still didn't work (and yes, I restarted the router, pc, laptop) and this morning… surprise! It was working! and it still works! without walking to him.
And before, port forwarding when I wanted to download something, the download did not start immediately… we waited for some time (in the order of hours). Upload… don't even say…
for Marius L .: I had made the same settings, but they didn't work for me last night…
What is the significance of the second light? In my lights intermitent.E well?
That led shows that everything works properly and is normally flashing, that means everything is OK
I have a big problem !
I bought myself a wireless rooter this.
I do not Meggie. I respected step by step instructions. I think maybe it from me. I have no modem net, ie the network cable is connected directly to the unit and was using netul so far.
Now I have a wireless rooter this cable is connected to the internet (enthernet) rooter and I connected to a port on the computer rooter. It is further noted that use Windows 7 enterprise (trial) and we have disabled firewall widnows and I uninstalled and security suite.
How can I make him go?
The error is as follows http://i42.tinypic.com/2wmjjx2.png
How do I install to go?
I would be grateful if you could help me.
Internet cable you plugged into the blue port (WAN), right? If so, you're wrong at connection setup. What kind of Internet connection do you have? PPPoE / Static IP / Dynamic IP?
I net the company called Akta e fo Seini (jud. Satu Mare)
It is simply very difficult to comfigurat this rooter we knew it is so hard, did not give him money.
Do not buy it as not good, it installs very hard !!!
Cristi know you have a router like this please ajutama to him comfigurez
If you can not configure it, it does not mean it is very difficult to configure. And I own such a router and installation 3 minutes had net cable and wireless computer on a laptop. What kind of connection do you have? It's almost impossible to configure any router if you do not know what kind of Internet connection you have.
You say it's not good? On the money you gave him, I think that's the best. Too bad that does not install single ...
Adrian Cristi know that you have a router that you could give me some advice, how to make it go repeat that I tried all variants.
I Akta the net. Company web site is akta.ro they gave me 8mb net with 33 lei. Foate are satisfied as I go netul, I know that I have static ip but not sure. In the instruction manual says PPoE to make it go, but I tried all variations apsolut and did not work.
At one point in the tutorial Cristi says that if we introduce smartphone MAC MAC introduce merge.Oare if my smartphone (LG P500) will go?
That please help me!
Case solved !!!
Thank mati helped !!!
Wireless is the best !!
The manual gives example only PPPoE. That does not necessarily mean you have this type of connection. It is very possible to have static IP. But you have net PC when you connected to the router? If you have a connection with Static IP, you have to look in Control Panel \ Network and Internet \ Network and Sharing Center. To the left of Change adapter settings. You go in there and right-click the network card Properties. Double-click Internet Protocol Version 4. Here you will appear IP, Subnet Mask and Default Gateway. You'll need to configure your router. That's only if you Static IP connection. If you leave a mess id for help.
If you did not net connected PC cable to the router, enter nothing MAC smartphone, because for sure you should have no wireless.
I searched on the internet than on the type of connection from Akta. MAC is connection-based. So your computer's MAC registered in the Akta. So you have to clone MAC network card from the computer, so as to be identical to the router. If you can not handle, let a messenger id.
Florin doing that in this video: http://screenr.com/G8qs
Regards for tutorial. After I copied my MAC work.
This router is normal when you are connected to cable (lan) with 11 mb download when connected to wireless download with 2 mb? desacrca these speeds on torrent. I did several tests with different torrents and speed always differs very much so. thank you
Yes, it is a normal data transmission radio Waves will never be as healthy as the wired (wired). There may be interference from other appliances under the house, counts and channels through which the transmission and reception of packets and signal strength and quality of the network card that has your laptop. It may be that enjoyable one wireless laptop to be not very good which often drop packages.
I have a small problem: once every few days the net is interrupted, both wireless and cable. Both on the laptop and on the PC it calls me "Unidentified Network", if I try to access the router from a browser it gives me an error. If I unplug it and put it back in, it works fine.
Hello, I have a rugaminte from you. I bought this router installed and I say well I think. I connect the laptop that I did settings and phone, with the other laptop but I can not connect, I tried in every way and nothing I say something like that access is limited. Please can you help me solve the problem, do not understand why you can not connect and the other laptop. Thank you very much and I hope you can help me.
Hello
I got a wireless routter tl-w740n my question is how can restrict Internet for some of the network, have
7 and windows
ubuntu (beginner lvl)
PS you are your most countries.
"How do I restrict the net for some" doesn't tell us anything clearly. Be more explicit, what exactly do you want to do or happen?
Who are some that? have access to the network? harassing you? or you want to restrict access and to what exactly?
I gave the password to the router 2 friends of mine and at one point went hard foate internet came fratemi-u scanned something (nustiu the program) and found several neighbors Connect, and get disconnected but wants to tell me how did I know and I
you are the best
We do not know what router you got but in the days ahead I write a tutorial about how we can secure router and how can we prevent the infiltration of other users in the network, as we realize if someone is connected to our network and are connected as we can block access to our network.
I'm still waiting for this tutorial…
Hello, I did configurations, all well and good
The software is installed perfectly (after I struggled some time :)) lucky I found this tutorial)
I wish to inform you that we have exactly the same router.
I am interested to a smartphone see it from the phone (wirelessu) .. as I connect all well and good, good etc .. The signal
Just do not go after the net ... I do not know what to do, as already desperate ... after that I struggled to install it now do I bother to go Addicted to your phone, what can I do? simply does not load pages on the net .. no android market anything .. Thanks in advance
As a second password must put data and password from the net modem.Incearca not so.
I don't have the password on the net 🙂…
Sunreti ultrasuperhipermega MOST COUNTRIES
I want to thank you for all the tutorials so far, are very useful
I'd like a tutorial how to make the internet from lan only Macs that I want. Wr741 router with DD-WRT on it
Good evening.
I got a router of this, encountered the following problem. I set goes well, but after a restart, stop going. If bag CD's autoconfiguration, when you reach the stage of verifying the connection, recovers and works well alone. Whenever give restart, this phenomenon happens. If you do not restart, it works well. What could have? Mention that is brand new.
Ajutatima and me please! How to configure router if I azest net neighborhood? If you can step someone explain to me in order that I'm not good! thank you very much!
Hi!
I also bought this router, I connected it by cable to a computer with Windows XP and to a wireless laptop with Windows 7. On the desktop it works relatively OK as if without a router (maybe a little worse) but on the laptop the big problem is load fff hard internet pages - even a simple google search is a problem… on you tube the clips go a few seconds after which I have to wait… I have it for 2 days and I don't know what to do with it ..
I configured something wrong? is conflict between desktop / router / laptop?
What could be the problem? or especially solve? Help me plsss
Thank you in advance!
But even know what kind of Internet connection do you use? PPPoE? Static IP? Dynamic IP? Usually providers district use of Static IP connections, but can not be sure as your connection is of this type. About Static IP connection type has spoken, even it posted a little video tutorial above and a very good AdrianGudus (fasting from November 19 2011, 16: 06). If you do not know the type of connection, let a messenger ID.
How can I unsubscribe from this ocomentariu? I mean not to receive mail notification when posting this comment?
Thanks nice tutorial. Today its acquisition and I am such a router and I configured very easily. It connects to it wirelessly, any device I tried: laptop, desktop telephone. A question I please: I had the laptop through LAN speed somewhere around 90Mb; Now, through wireless and 50Mb have somewhere between 65; It is normal or not is something configured right? Thank you.
A beautiful day.
The speed depends on the wireless network card device that connects to the router. If the network card should have standard N rate should be close to the speed wired.
I have a MSI CR620-616XEU. Features such as these:
Network:
10/100
wireless:
802.11 b / g / n.
I'll double check.
Thank you very much.
Hello. If I may, I would like to ask you what settings do I do this router to access an IP camera on the net from the outside? I resolved to mention that can access the camera via wireless net from RDS have dynamic IP and peruse this before I was using static IP router and access to Romtelecom IP allocated from anywhere. At the moment I do not know what settings should be done and what IP to access it. Thank you. A beautiful day.
Hello. I mean I own this warless and I am very happy with it. But I have a problem. I have 3 laptops and 3 PCs. I mean, warless doesn't work on all laptops. But the wired internet only on one computer on the other 2 computers shows me 100Mb ip dns all but I don't have internet… So mise counts on the network but I don't have net only on 1 only singur What should I do to have the other 2 internet . thank you very much. Please help me. Hello.
I have a router Telecom Italia fail to connect to the internet from Romtelecom I put to him but does not connect automatically ip looking but nothing to put ip ip manually initial and final ip ruteru is alice gate
I have a laptop and 2 desktop-uri.Pe Besides I also have a Samsung Galaxy Fit) My question is my phone can see your Wireless him?
PS What distance wireless transmitter.
What do you think about this Router
-> http://www.emag.ro/routere_wireless/router-wireless-d-link-dir-300-4xrj45–pDIR-300
I myself router TP-LINK TL-WR340G. My Internet is the Clicknet and I SpeedTouch modem. When I bought my head knocked 2 days and finally started. Two days stopped working .. (From phone conectiunea see wi-fi, I connect to it, but it's not the Internet) Tell me some briefly several times what they should do to go. My Conectiunea looks like this: http://postimage.org/image/k2aqk7n4j/ and it worked perfectly until now 2 days.
Thank you
I dig this hugely a router but fail to connect to miss Cable leptop go I reinstalled many times but nothing .. :( .. what i do ????
Hello Cristi.
First I want to thank you and the team for their effort.
The problem lies in the way urmator..routerul is extraordinary especially at this money but I thousand torrents limits the speed cam jumatate..cu Internet cable directly into the computer put on the 11mb download / s and the router bit with 5,5 mb / s (not to mention the wireless cable). It became quite annoying problem considering that is the 3 century router which is like phases.
Maybe you can help me with some advice on asta..mentionez that is rds fiberlink2 provider with guaranteed bandwidth, static ip. I followed all the steps in the tutorial but it seems that speed did not influence anything.
Thank you
Try the settings in this tutorial: Increase the speed of download, upload and number of connections in uTorrent
You can find it with the search box on the top right. I also shot with 11 MB using the same router and even through the browser, I posted the prints on the Facebook page. The same provider, the same type of subscription only as a dynamic ip…
is there any difference between this router TL-WR741ND presented? besides the fact that the antenna is detachable?
Hello. I have this router connected to the internet rds… with cable I download with 10-12 MB but via wireless only with 2-2,6 MB. I would like to know how I should configure it to be able to download at a higher speed. On the speedtest site it shows me: by cable 95-100 Mbps and by wireless 20-22 Mbps. I read Radu's comment and he writes that he can download with 5,5 Mb. I would like to know how I can configure the router so that I can reach a better speed. Thank you
Unfortunately I mentioned that through the cable I have the download 5.5 mb..by wireless I have about 2,5 mb download..but this also depends on the network card of the laptop which mine is very weak considering that on iphone I download with almost 4 mb..I say it's not the router's fault… it's because of the laptop's network card which probably doesn't support "N speed" and can't download at the maximum power that wireless offers.
If I am wrong please correct me Cristi :)
You're right Radu, no matter how good your router, if you have a network card weaker. On wireless G (54Mbps) can download a maximum of 6,4 MB per second, this course if everything goes perfectly and the signal is maximum.
Thanks for answer. I hurried to read… I think the only solution is to change the wireless card of the laptop or put one via USB. Thanks for information. For everything to be perfect and the maximum signal, what should I do?
We recently passed subscription 120mb fiber power from the ups and wonder yes router it would face because my router me old do foodie ie net of moves worse than before and the lights on he began to flicker but out netul router perfume moves much better than before.
Hello!
Recently I purchased a wireless router TL-WR740N and I have some problems with it that sounds like this: I bought Sun, I installed it, I did settings in 2 minutes and went up during the day Thursday laptop when I indicate an exclamation point and can no longer navigate. I mention that LEDs go, blinks at the wirelass and one that is plugged into the PC, the wheel is on the right circle flashes and also stay lit all the time. If I give back to the router restart (black button) recovers and we signal for several hours, but afterwards and I worry. I tried to reinstall drivers version of wireless settings, but it did not help anything. If you help me I would be very grateful. Thank you
I also had this problem and gave me serious trouble until I gave her the hac ..
1. enter the control panel (I'm back to windows 7) network and sharing center -> change adapter seting and gai enable wireless and set a default connection to the old network made by you,
2. verify password and ID are written as if-need (RDS)
3. make sure you entered your router genetar
OS are you using? ubuntu linux have?
if you have the opportunity to ask for help there team wiewer a friend
# Square windows XP SP I 2. Last night I did a reboot and now go, not done me problems. It is possible to be blocked because I wanted the router at about 5 degrees C?
Hello guys. I also bought this router and it causes me problems when I try to insert the ip… the ip bag, after the subnet mask bag and after the default gateway bag and when I save it it gives me an error… ”Error code: 5007
Bad gateway for WAN IP, please input another one. ”… A friend of mine had a similar problem on another router and said he solved the problem with a firmware update… do you think it would be a solution for me too ?
I looked for a newer firmware on the site at tp-link and it seems that the only one they have on the site is the same as the one on my router… what can I do in this situation?
I want a router with a USB tutorial on what do you think of it: 450Mpbs Wireless N Router TP-LINK TL-WR2543ND .I want a new router and USB port pate to be accessed from the network.
Hi, I watched carefully videotutorialele about routers that I felt searing or useful. I still much to you actually request a recommendation if possible to a wireless router (any money or router brand) very good that can be easily configured in Windows 7 / 64 bit (I have an Asus laptop G73jw) and want to connect the router to a network-5 7 computer (laptop) to run very well. Mam look and caught my attention-WR1043ND TL / TL 2543ND. Some seem too expensive for what it offers so mother thought something good optimal and can be from ANY brand but I have experience.
Do not reset frequently especially when I can Shari power goes to fillme etc at high speed and everything needed to go perfect.
Thank you
And how you want to feed it if it happens to fall stream? Battery AG-13?
PS I do not know if you realize, but serious foul Romanian language whenever you can.
Hello! AM net of NextGen and I have a router whierless Model: SWR-N150 Serioux.
I want to make my own server counter strike and entered the port The default settings of the router to make forwordin.Am really succeeded, but when I want to connect to the server from the public that he type with 94. . . not the one who offers routeru million since other friends to connect to the server paote merege only if I get myself one with the IPU 192.168 ... Please help me! .I read and I documented logic should go and not I go I have no clue.
for power problems I knew they were UPS, there was something like holding the power for half an hour, looking for a piece of it, but to be something of quality, and at speed (router) and other wonders I knew that class N it's the best, you will get about 2,5 mb download speed (wireless), now it also matters what net subscription you have: speeds, limits, type. ...
Good evening. I own this router that I connected to a modem from rds. My subscription is 100 mb, fiberlink subscription. I have a laptop with wireless card b / g. If I use the cable internet I get 100 mb or about 100, so I download with 10MB / s. The problem comes when I enter via wifi. the speed is 23 mb and I download with 2,3MB / s. Download data is estimated… Someone who has this router and laptop with the same b / g technology, let me know what speed it catches on wifi. I also tried to connect from a samsung galaxy with N technology and on the phone I only get 13 mb and 1,3MB / s download. Are these download speeds normal? Do you have bigger ones?
I got myself a router Dasta today I can say I 2 storey house with little signal in all casi and easy reference to your tutorial on the CD was set puts him name and password pam pam net were not so complicated totorial can make a cd and I did in a minute
Until yesterday I had a router tp link wr941nd. I tried the firmware update, I received the confirmation but I didn't wait for the refresh. I gave the refresh manually and it doesn't work. In the tutorial from 05.09.2011 "Installing DD-WRT" I found that I can retrieve (maybe) the router by entering the addresses manually. I will try. In the meantime I bought a tl-wr740n Ver 4.0. Go. My question is how do I switch to IPv6? I have internet from RDS. It seems I would not try methods with routers ( I blocked two, one of them maybe I'll get it back) and I'm interested in how to proceed with Windows 7 64 bit OS?
Hello Cristi and I can clarify for me what are powerline adapters and if you can do a tutorial on them and I'd like to know more about this technology as from what I read on the net I can lamuri.MULTUMESC
a router that is stupid
Who knows which version you hit you, are multiple revisions of this router. I usually I kind of 2 years and I have never tricked you say though I had enough power failure.
if this occurs you a UPS I have no problems with mine and it's the same model
I also own this model of router and power outages in the area where I live are quite common, but I never had to reset the settings. Anyway, in your case the simplest solution would be to back up the settings, and if you happen to lose the settings after power shocks just give Restore to the settings and that's it 😀 To back up you go to the browser ( 192.168.1.1) and go to System Tools -> Backup & Restore
I have another model, model TL-WR841ND, and not know how to enable the router to work on laptop and I install from the CD given to me buying routeru's (my laptop has wireless). Be because the laptop I have windows xp and windows not 7? (because I heard that the router is compatible only with Windows 7).
Who told you this is an "expert" in the field of networking 🙂 It's very stupid. Routers are independent of the operating systems of the devices that connect to them. Routers have their own mini operating system. So it doesn't matter what operating system the computers / laptops / phones / tablets that connect to the router have. But did you search your laptop for the wireless network you set up? You found it? Did you try to connect to her? Maybe the network card is not activated in the laptop or maybe the driver for the wireless card is not installed?
straw router driver is installed, but it just denegasit, installs and configures everything, but simply is nowhere to be found simply not find him anywhere.
@Ion Do not see what you put Comment
Bogdan think you do not have drivers for the motherboard or network device drivers for wireless connection,
Right click My Computer, click Manage, click Device Manager and see the Network Adapter Driver Update liseste.Se may lack online.
Bogdan, I am wondering if you have installed drivers for the laptop's wireless card. You live and I say the driver of the router. Which driver, man? As a router, as I've explained, it is independent of the operating system of the computer. Do what you said Ion last comment, he knows what he says (compared to you). If the driver is installed on the network card, you have to look your wireless network and to connect to it. The laptop does not connect so crazy any wireless network that finds.
I installed the network card
I managed to connect, the problem was that I had no wireless network driver I thought you meant the network driver laptopului.oricum Thank you very much.
Hello I got myself yesterday and router works fine.
But I have a question I go to the router and internet fiun in another town?
(A colleague at school rather stay away from home and still have net from the router on the phone)
This model has national coverage. I had to buy moldelul TL-WR666XXX. ;)) Now let's be serious: there's stupid what you say. How to have access to the internet in another locality from the router at home? Maybe your colleague connected to a hot-spot / router near the school or even the router school. In the big cities they are placed hot-spots with free Internet access in parks, cafes, hotels etc. However, routers have a limited range of action. Some reach up to 300 meters in the open, any obstacle decreasing range.
Hi! I myself have connected the router to which 3 laptops. At 2 of them is no problem with the connection, but one that connects show, appears to have excellent signal but not going netul, the signal remains indents yellow triangle. What can I do in this situation? thank you in advance
salutary a question of logout butonu not find the setup page where the routeului?
salll
if you have static ip it can to make it dynamic? I mean if I connect a wired PC
has fluctuated protection outage and lightning?
Hello, I have a router just like this but I have a problem with it ...
Il bag in socket, connect the plug on the net (internet cable, IP), connect another cable to the router and the PC then when I walk on http://192.168.1.1 it doesn't enter me, it shows me exactly how I would like to enter on Google for example, zike that it can't connect, I reset the router with a SEWING NEEDLE but nothing, it still doesn't want to enter…. Are you telling me what to do ??? to know what I'm throwing at him 🙁
Are you sure that the cable used to connect the PC to the router is good, do not interrupt somewhere?
Internet cable jack is inserted into the blue of the router and the PC can be entered in any of the yellow plugs 4
I resolved, but I have given several times on a website that says the router and I went on that interface: D
hello I've got a router like the one in the presentation, just as I can not put password on it, I tried all the variations there was security, do not go any anything I put my wirless connection block, please tell me to me that is the problem if you know, thank you!
I have a router tl-wr740n and failing to get on the router http://192.168.1.1/ with installation cd get somewhere says: detect failed netwoek adapter has not been found.please ENSURE you have installed a network adapter, and it is enabled.mentionez I rcs-rdc.de Internet to torment me two days, and baby laugh at me [manzeste] thank .va.
Florin… also try 192.168.0.1 or see that on the cards you received in the box it says to insert a link
tplinklogin.net come here and throw admin user and password
Adrian… .thank you very much.in fact it was 192.168.0.1 and not 192.168.1.1 I went to tplinklogin.net and solved it. The child is happy! Thanks and good luck.
with pleasure… I'm glad I was able to help you
Adrian… I know that you are not allowed to download the video tutorials from videotutorial.ro, but are you allowed to download your video tutorials from youtube.com? Thank you! I am waiting for an answer.
I need a hand!
On topic ...
I offered by Orange internet. I use a Huawei modem 220.
Now ... I encountered the following problem: I have a computer (PC), a tablet and a few calls. Besides PC all have WiFi. If all other PC's on the net have.
If you stick your SIM in a phone, however, all net, less PS.
I took a TP-LINK router WR740N but no USB plug so it goes. I got a new gadget TP-LINK TL-WN723N and do not know how to make him "spread" netul from PC or receive it on the phone all through wi-fi .:
It can be stated from the beginning; I installed Windows PC 7.
I can not change anything in settings!
The IP address that we received is 192.168.137.1 and can not be changed :-(.
Connectify Hotspot nor I failed. The program has changed! Not willing to give 140 of (dollars or euros) for the program.
Good. I have a problem, I 50 RDS internet from a laptop lenovo Mb g550 when he was a SpeedTest Connector Cable I-48 50 about mb I bought a TL-WR740N I made the connection as shown in the tutorial and now top speed is max 20 mb wirelessly, why so much limited in tutorial not see almost no difference to decrease speed. What could be the problem to me. Thanks
Hello!
I broke the laptop network card and having the option of a NIC currently usb I thought it would be ok option of purchasing a wireless router. (laptop has wireless built-functional). I bought exactly this model of router today and unfortunately I can not install. I say that not found adaptet network. I think it's because the network card (wired). otherwise how do I install? I have an internet stick from rds.
thank you
Hello, I have a question about controlling bandwidth to the router tp-link. Edimax router and before I had when setting a limit on such 32 mb port, that port went with 32 mb matter even if you stop using one router to another port. TP-LINK to see that does not happen so (at least mine) and even after I set ip port that is not slowing at all, go all to the fullest. My question is if somehow this technology has advanced QoS and reduce your speed to the port that I just set in just moments that most users unload using a network router and then incaraca. Dca not it mean that your router has a problem, it's the 841ND v8 the last firmware
Hello ... .se this router can set on / off at a certain time?
thank you in advance
It can configure and ROMTELECOM?
Nu
It depends on the internet package you have… provides more details and we will clarify
You driver wireless network card installed in the laptop's operating system? Turned wireless card? On most netbooks and notebooks, there is a hotkey that activates and deactivates the wireless.
Wireless internet speed is not the same as cable, especially if your laptop uses old wireless technologies. You also need to consider a superficial configuration on your part of your wireless network. It may not be properly secured and your neighbors may be connecting to your wireless connection, and then bandwidth is automatically shared with all network users. About securing a wireless connection has already been discussed in another tutorial here on the site. Type in the SEARCH box in the upper right sidebar: "secure wireless connection" press the enter key and you will find the tutorial.
Most likely you have misconfigured router and network connection in wireless.
We already have tutorials on the site about "setting up a wireless connection in the router" or "setting up the internet connection in the router". You will find them using the SEARCH box in the top right sidebar.
Thank you! I'll check!
Hello! First are specialist in networking so I hope I do inteles.Am purchased a TP-Link TL-WR740N. I installed it but my laptop does not vede.Sau my router signal spreads because, from what I read, the 3 century led flash which should not happen. The first time I installed it I saw at the open network after I installed it again, not see him. I hope you can help me because I bought a tablet and the little conecta.Multumesc not be anticipated.
Check in the web interface of the router (enter the address 192.168.1.1 in a web browser) in the section Wireless -> Wireless Settings to check the options “Enable Wireless Router Radio”, respectively “Enable SSID Broadcast”. The first must be checked. The second one does not have to be checked, but if it is unchecked, your wireless network will be hidden. It's a little more complicated to connect to it. And as you say that you are not an expert in networking, you better tick that option as well.
Thank you !
I have a little problem with this router. When open sopcast shortly I have net. In the router settings appears connected but can not access any page, and that takes a long time to recover. That after some resets
I have a problem: I replaced the old router that I had a Qubs (went very well, but it was a little outdated and I want to put it in another location), with a new model TP-LINK TL-WR841N , I mention the RDS net fiber and are in Bucharest, it's worth, I put the new router configured glancing at your tutorials, but I did not go all the settings to connect on wireless on laptop (cable goes, there goes wireless) smartphone goes on, but not working on the laptop; mention that I tried to clone the MAC Address without cloning, sees newly created wireless network, but when connected to it, after entering, I immediately appears unidentified network; mention that I chose WPA security / WPA2, version WPA2-PSK and AES encryption!
please tell me where I'm wrong?
thank you!
Hi, I write that he type 192.168.1.1, gives me his bag name and password, admin bag and I reset the admin page to the bag and give name and password does not say anything
This means that the data entered is incorrect. Try to just put "admin" in the username and password leave the box blank.
If it still doesn't work, get in touch with those who last configured your router. Another solution is to hold down the hole in the back of the router for 10 seconds and write "reset"
If you do this, the router will lose all the settings you have and will return to the factory.
Default username and password may be different from router to router for this reason we recommend reading the instruction manual that comes with it. If you do not have the manual, you can find in pdf format on the website of the manufacturer.
SAD WHEN THE RESET ROUTER MUST BE ON OR OFF PUTONUL II THE SAD?
What does logic tell you? Since that's a button, it's more than obvious that the router needs to have power when you do this, so it needs to be powered on and off. I haven't heard of a mechanical router, not even a semi-mechanical one.
Please quit posting comments capital letters. I see you everywhere you post and posting in capital letters will not be answered faster.
I wrote that I was capitalized for the tablet and ms, I solved
WDS Bridging - can you do a short tutorial about it? THX
I also have a wireless router and a TP-LINK TL-WR740ND is hard Connects to wireless wind WIND XP and 7 5 m distance and not have good signal to pre wireless.
what can I do ?
I set myself a wireless router TP-LINK TL-WR740N and when I walk on the phone on Google or any other website does not work, appears to me as if I had interethnic but if you get into app facebook, messenger, mail or any other application that uses the internet go. From what to be and how to fix? Thank you.
I gave him 69 Lei in Auchan and are amazed by him
Hello, I bought myself this router and I have a misunderstanding with him when I connect the wireless laptop is connect with 54mb / s, before I connect via LAN and the connection was 100mb / s, what wirelessly connects only 54? I mention that the rds and internet router model TL-WR740N verse. 4.23 with firmware ver. 120320.
Thank you in advance !
Adrian,
Pretty please, if you can, to do a tutorial on how to do a mail server at home (from head to tail, that is to install software, to setup email addresses). I've tried what I found on the net and I do not iese.Eventual, if possible, even ask you for something like that. I think it would be more interested.
Yes, a mail server should be interesting, and I'll try to see what I found on the net and if they manage to do it
The software I got from the website indicated in videotutorial but a version lower, not too would recommend this upgrade because we had problmeme with wirless site after upgrade, CAN I wanted to return to the software initially I was not aware of what I've downloaded brick-look, now stand there. I understood that I could do it with a serial cable for Nokia, but we had time.
Good evening,
I have a question about this router. I entered the TP-LINK website and there are still three firmware updates (verse 3, 4 vers.2-updates)). My question is: To upgrade to version 4 -Last update, I must do and other updates? Or do I upgrade directly to the latest update from version 4 2 version (without 3)?
For Georgica.
No, you can proceed to update the firmware without probleme.Totusi ulti if your router is without problems not update it. I updated my firmware and everything was changing IP mia brought to 192.168.1.1 to 192.168.0.1.Daca though you do, s the cable do not have all the wireles.Mentionez me a TP-LINK ..
Attention, if your router is 3 version can not only use firmware version of the router 3.Vezi on which version it is.
Can you telling me how you did the upgrade?
I took off site 4 firmware and tried to make him upgrade (of course before I gave factory reset). It gave me an error like that would be good update site. You took from elsewhere firmware? Or possibly send me and address me [email protected] Your firmware?
I answer you and me, please.
Thanks for the reply !
Yes, I checked myself and indeed protocol is as you say 802.11g. Can anything be done, to connect with a higher speed, or I have no chance?
If your laptop does not know than g, you have no chance. If rouetrul is set to g and n laptop knows when the router passes on the car and go for sure.
I hope I have been clear.
Sorry to bother.
You tell me what settings I need to do to be able to use the ODC?
How could I do a firmware upgrade TP-LINK TL-WR740N I version:
- Firmware Version: 3.12.7 build 101230 Rel.40167n.
- Hardware version: WR740N v3.00000000, and I would like to upgrade it to version 4, can you help me with a tutorial?
Thank you.
I recently purchased this router, I installed on a desktop that has installed xp black edition, I used easy setup, configured ok ...., but the desktop not connecting although I show active connection and the tablet and phone have signal ful but I also do not conecteaza.Internetul him from romtelecom SpeedTouch modem, router interface I went and I tried out with quick setup, I checked the cables, we mounted cable modem and the router wan slot on cable drive ... I do not know what to do ... can someone help me? After config.diagnosticul look like;
warn FTP (Passive): Error connecting to 12029 http://ftp.microsoft.com: A connection with the server Could not Be décidées
warn HTTP: Error connecting to 12007 http://www.hotmail.com: The server name or address Could not Be resolved
warn HTTPS: Error connecting to 12029 http://www.microsoft.com: A connection with the server Could not Be décidées
I and I have the same router. If you want to purchase, you make an excellent choice. I use a PPPoE connection from RDS, go razor!
I recommend it.
Congratulations to Christ tutorial.
Hello .Azi I bought myself a router (TP-link WR1043ND) .After 20 minute updates did not go wirless.Am DD-WRT and no longer mg nimik.Am shoved back cd to install it and says no RDS was detected routerul.Folosesc PPOE .No know what to May fac.Putin help them? MS
Hello!
I have a big problem with a Tp-link router model WR841, namely, the router is mounted by the Bulgarian network which has expanded to Romania-Giurgiu "NETWORX".
The problem is that I can not access the administration page has changed since this router firmware with another modified them.
If you have an idea how to vr can access admin page without knowing the username and password I would be very grateful.
A… .about the server ip is 172.16.1.1 maybe it will help you with something.
Thank you in advance
Hello,
I have a problem with a router TL-WR1042nd, l.am configured all well and good, go netul, wireless everything, what bothers me is k can not change his IP (LAN IP). Dak when I try to change IP's WAN port cable internet gives me the following error:
Error code: 5008
WAN and LAN IP address IP address Can not be in the same subnet. Please input Another IP address.
He removed the cable and can change its IP address without any problem. But when inserted and cable internet resets to the default address. Example: The default address of the router is 192.168.0.1 I change it in 192.168.1.11.
That is because ????
Thank you!!!
TP-LINK TL-WR841N or TRENDnet TEW-300BR N731 Home?
What is more convenient / strong? Can someone help me with some advice? : D. Thank you in advance!
Hello, I have a problem with enlightened minds :). There is a Tp link router like the one above, a laptop with XP that connects to WI Fi with Intel Proset wireless utility, another laptop with WIN 7 with normal WI Fi connection from WIN and other gadgets like tablets and phones occasionally . The problem is that when I connect for the first time (when reinstalling the system or after connecting to another wi-fi network) the laptop with XP to WI-FI asks me to put the PIN of the router without password and user after which I only have the laptop with XP and the others cannot connect in any way (only the password and user are required to PIN). I searched, I researched…. Please help me what to do to not reset the password when I put the pin to the laptop with xp (or maybe it's another cause). I mention that if I reset the router then the password and user ADMIN - ADMIN go to the others. Thank you very much for your help.
Many ask, few respond
for Jencik
Create a network to connect with password [VPA2-PSK security] with no pin.
After you create a functional, enter the router and reserve IP addresses for all devices connected to the router you especially PC uri.Uite here as rezrva addresses:
http://picturepush.com/public/12459919
If you have various problems related to IT, enter this site and "ask" for answers:
http://intreaba.videotutorial.ro/
Hi, I bought a TP-LINK TL-WR1042ND, I configured RDS connect and 5 minutes after my local area connection occurs with yellow exclamation mark, and it does not connect anything to the Internet. I've got a TP-Link router (another model) that works perfectly and I put the router in another room with cable WR1042ND old router and just do it. Help!
Hi I have a problem when I try to connect with laptopu asks me a pin that is on the back of the router if you stick that pin on laptop only I go I connect your phone to your tablet nothing tell me some what to do wirless any mention that I want to connect it asks me to help pin on me by email and spunetimi what did GRT
Can you tell me how do port forward to staying with the ODC active? I have a router TP-LINK TL-WR740N
Hello everybody.
First of all I want to thank Cristi for this presentation of the TP-LINK TL-WR740N router, I am very satisfied with it, only I suffered a small problem, I could not enter the router's address (192.168… blah blah) from any browser, only from the phone I could access the router's address. I reinstalled the windows, good luck with the ghost image, I restarted the router, I did everything I could and no results. The problem solved in the end was by uninstalling the antivirus, I had a NOD32 5 that blocked my access to the router address.
I posted this, can anyone happen to you and not to waste time like I did.
Cristi Thankyou again for this site.
Much respect.
I have a TP-LINK TL-WR740N and it downloads after torrent with a maximum of 1-2mb / s… when I had the cable connected directly to the laptop I download with 7-8mb / s. please help. i myself increase the download speed. thank you!
hello can you help me I'm not going to get the one with admin admin ip menegement
Hi, I also took this wireless router today, I installed it, after several attempts, and finally I was able to connect my sister's phone to the router, but instead, when I google the computer, it doesn't work and I wonder why? I have netu from upc cable, scientific modem atlanta 2203, I put cable from modem to router and I put the computer to the router, in one of the ethernet ports on the back of the router, I want to be able to connect to a laptop that has of course wireless, I also connected to that, but it said "no internet access": ((I'm urgently waiting for some help
Hello Adrian. I congratulate you for the tutorial.
I want to ask you how it happens that at the beginning I was downloading with 7.5-8.5 mb/s from the internet via wifi (Model No. TL-WR841N / TL-WR841ND) is from TP LINK and now after I restored the factory, I download with 5-6 mb/s. It's somehow about the Mode that I have on 11N only, Channel Width: AUTO
Channel: 6
Max Tx Rate: 300 Mb / s
Use Zorin OS 6.2 LTS (Ubuntu LTS 12.04).
RDS 50 Mb / s
Lenovo B580 i5.
PS. I also tried 11N and mix (bgn) only, Channel Width: 40, and around me… it's full of wi-fi signals
Channel: 6 and others… .test… .same problem; to be an interference due to channel width 40, stay in the block.
I don't know if you will see this comm… it is important for others and not only for me.
All the best!
We blend and I mean this router wireless.Vreau helped me a lot this tutorial.L have configured a minute and jumatate.Iti thanks for the tutorial and good luck further.
I want to buy a wireless adapter high power exactly 48dBi. Are dangerous to the body where it wifi power?
What is the limit of wireless radiation? How dBi?
ETSI on 2,4 5,5 GHz GHz respectively, does not allow higher powers 100mw (erp) pt. Europe. What sayest thou of 48 dBi represents an output of approx. 40 KW. Do not plant something for wi-fi, marketing is advertising.
Cristi I have a problem with a router tp-link tl1042nd I configured using the cd I have chosen ppoe rds
I went there and password from rds useru
But I have a problem I do not know whether to blame him or I am or I did something right but my PC goes blocks and hop that goes along with pc locked pomesc me can not do anything but to give restart and take from head and block my pc and so on ..
What can I do?
You deleted RDS connection from PC?
If you deleted the connection, try to modify the MTU.
Do a deep dive is recommended values RDS network MTU.
Yes I deleted the old connection and I did exactly that toturialul Adrian
I will try and see what MTU fix
I changed the mtu to 1480 1492 as I have found that it recommended for rds
Yes if you will give me and the issues are?
Hey guys, welcome Christ.
I got this router for about 2 years, and I recently decided to download some movies with uTorrent. The problem is that cable-8 10 download MB / s If you download the Tp Link, I go 250 kb max. What will it be?
Is there a setting? Or must always out jacks, and always rub network card?
Sincerely, I wish you a nice evening and a happy new year.
Waiting for an answer to my question, if you please.
Staycu, I also faced this problem. You must set utorrent to open its own port for download / upload. Enter utorrent -> Options -> Preferences -> Connection and check “Enable UPnP port mapping”, “Enable NAT-PMP port mapping” and “Add Windows Firewall exception”. It should work for you, if you have not disabled UPnP in the router settings, which is enabled by default. If it still doesn't work, tell me to tell you what setting to make on the router. Normally it should work like this. Success!
u change the comet bit-torrent with that one he knows what to făcut.U-torrent I've ever seen is blacklisted as mining program as started
SALL, I have queries, we internet private company, is distributed 2 house computer via router tp link from this, go 3 cables to 2 2 tracing Optibox other to receiver., All internet connection ok . but when I connect the receiver dreambox control center program, I do not connect the receiver, the receiver is set to static ip network recognizes, given the yahoo ping shows loss 0. understand not need the server [default password, admin]??? Thank response.
I bought the same router that you present in the tutorial… The problem is that, after installing it, which was done successfully, it does not allow me to access the internet! Is it possible that I did something wrong?
Hi everyone, I have been working on this router for a while now, but for a few months now it has been "squeaking"
I connected the phone to wi-fi and after-5 10 desconecteaza min is the wi-fi and you can not connect it no longer sees (must give restart the router) on / off or not working. 4 I v130529 version ( last) without dd-wrt.Am tried 2 phones (bb 9320,9360 os7) but the same problem with the older model bb os 8900 5 was not nciio problem
The channel is set to automatic, I tried to put it on "9" mode: bgn mixed, unfortunately it doesn't work at all, I tried to see everything going and be stable so that it doesn't disconnect anymore. wpa2 + aes
I ask those who know or what they have faced this "problem" and have resolved to answer
thank you in advance
a good day
Hello! I have a TP-LINK router as in the tutorial. I connected to WIFI laptop and it works ok, but a Nokia e72-phone can not play youtube videos youtube.Pe other routers play only on my riuterul nu.Stie someone what settings should be made in Rouerie I go to youtube? Will I have to change the router or can fix the settings? Thanks in advance!
Hello I have a router and I Serioux China 2 weeks to put a password on wifi. I watched this video many times but my router menu is different than its menu in the video. and even fail to put the password. because not only find WPA2-PSK WPA2 and when I try to put password WPA2 laptop can not connect and I'm an X appears in the lower right as there were no internet connection. I'm sure I'm wrong somewhere, so I beseech you to help me. my email address is [email protected] thank you in advance
hello, I installed OpenWRT on wr740n with International v4.24 version works without apparent problems with Barrier Breaker Snapshot and we happened next thing: do not light up the LED 3 from him and not see network or laptop or phone, do not know what I do, iam given reset but nothing
Hello .. I am writing in hopes that you can help me about this router tl wr 740n! Problem is that I can not connect my smartphone to the wireless network and do not know why .. please tell me what steps should be taken for connect your phone to the wireless network thanks a pleasant day!
Is this a samsung phone?
Try to put the router on channel 6.
I also have problems with this router. I want to configure it on a PC win xp.cu cd tells me that "no network adapter has been found" or "unplugged cable" to the network card (an X) and I can not continue the installation. the manual doesn't let me (with 192.168… ..) it tells me I'm not net on the laptop I managed to make the wirelessu work manually (with the cd it blocked me again at some checks I was doing) but I didn't get it by cable. (when I put the cable on the board the light comes on so it's good). -here and with CD and manual but I still didn't have a cable network. so why can't i do anything from pc? I have net from rds.thanks !!
If you read the Similar Articles section below the video tutorial, you would come across "How to make RDS connection and wireless internet settings in a router" written in red. A single click on that link took you directly to the tutorial you need!
I solved in sf !!! it was from the network card I had to tick ip there to appear internet getaway at the local con area. and only AFTER that he let me enter the router page but not with 192.168.1.1 but with 192.168.0.1… and the CD went after that. ms anyway advice
Hello, I have a problem with the router tp link wr740n, after you install it and check the router gives me an error failed to router settings checked why?
Hi, I got a tp link 740 n wr, good, just as I had cable rds 96-97 mbs now I 40-42 tp link! Why?
Hello! I also have a problem, I also took the TP-LINK router and unfortunately I took it in Polska in Polish and I hit the language there but it doesn't work to use the arrow to change the language… what can I do 🙂 ????
hello..I also have a problem with the router… my net works but after about 10 minutes the phone stays connected with full signed but no longer loads anything… I turn off the router and turn it on and it works bn and about 10 min
Hello
I have a small problem with this router: when I write in cmd “ipconfig” it shows me the ip with 192 …… and if I write on google myip it shows me the one with 79 …… How do I show this ip 79… .. and in cmd when i write ipconfig (i want to open a game server and i can't because it doesn't see good ip) i did portfw and in vain
Thank you
You did wrong port forwarding.
If you want the traffic to flow through the cheese to the PC with the server, activate DMZ for the ip on the PC, the one with 192.168….
the DMZ Host IP Address IP ala pass with 192 ??
looks like I write in cmd http://imgur.com/NqRvYMY
And so look at me after we did the port forwarding http://imgur.com/eGkafXo
on my ip site it shows me that I have 79.116.7… ..I want to show it everywhere
The router must have an IP assigned by DHCP running on the Service Router.
You can not use the same IP on the PC and the router.
Now router has public IP and PC has an IP assigned to the router.
If you enable the DMZ will send all traffic coming towards you on the PC where you have that server.
If problems persist, disable the Windows firewall.
Windows irewall site is off
I did everything you said above and when I start the server it sees ip with 192… .and it doesn't work, the idea was to see the one with 79… ..
but to understand that the router can not do something
PS: and those from RDS will not make me static ip so I let my hand
See some servers using multiple ports.
Try doing port forwarding and port 80, 8080, 443.
It is possible that these bandits from RDS to block some ports that make too much traffic, such as when 25 port for email. In some areas the companies and individuals who have personal email domain and can not access your email through your email client, and must do all sorts of tricks with unloaded into the Gmail account to read email.
What they said, than to invest in modern systems to combat spam traffic generated by better close the port and ready 25. Like I give myself atomic bomb in the terrace in summer, when mosquitoes bother me.
The phase is that if I plug the cable directly into the computer, I don't have to deal with the ip anymore, the server sees the good one (the one with 79), I did port forwarding for port 27015, that's what I need, but the router assigns it to me. that ip with 192… I thought I could somehow "fool" to see only one ip with the one with 79… that appears on myip
Hi, I do not know where to look and who to address. I would like to make a configuration to a tplink 740n, so when you connect me to wifi and then open a web page, defend a web page that I want to defend and then through this page to me Provide Internet access. Can someone help me? He anticipated me.
I did not understand exactly what you want to do. So you have a router. When you're connected to WiFi and browser you open the first page that appears to be one of your choice (eg videotutorial.ro)? If so, you can do it in your browser settings.
Hi!
I have a problem. I have a rooter tp link and sometime long ago I changed user passwords and network to make safe and unfortunately I forgot where I data and writing. Please reset Ajutama how they find me on my own rooter. thank you in advance
hello Cristi, for 2 days I have been struggling with all kinds of settings on the net and it doesn't work out for me, what do I really want !. wireless model TL-WR882n (tplink) I connected them to each other and it's ok I have wireless at home on my laptop or any smart phone. What I fail is that I fail to become connectable on torrent sites and therefore I can not upload properly or almost not at all, so if I unplug the wireleess modem I manage to become connectable… .what to do or what to set to both modems to appear connectable for torrents and especially on mxyz! utorrent. Thanks in advance and I'm waiting for an answer!
Enable UPnP on both devices.
I did and so I activated upnp, already when I look at upnp from tp link it shows me that the port I have on utorrent is enable at tp link, but when I check on the torrent site they still appear unconectable, I don't know what to say I think somewhere there is a conflict, what I saw the difference was that the IPs were different. I didn't go to dmz…. I don't know if it would help with anything !!
Hello cristi
I am a "devourer" of tutorials. From you I learned to manage on a PC, with you I installed the first windows and all. Now I have a small problem and I can not figure it out. I have a TP router -LINK-TL-WR841N and I can't make the connection anymore. The WAN stick is (lights up) orange which is not ok. What's the problem? I mention that, directly through the modem, the internet (rcs-rds) works correctly. It is clear that it is not because of the router, because I bought another one and at the first connection it shows me the same thing. Please help me. I ask too much if your answer can be sent by e-mail.
Respect and respect ………………… andrei
I also took this router but unfortunately it leaves the wireless signal to be desired or I don't know I can configure it… it is certain that I have to come with the phone next to the router to be able to enter the net, already from about 4 m it doesn't pick up signal wireles