Hello friends, this tutorial will show you how to change a source where one replace the old one or simply make a new and must assemble source.
Motherboards desktop source (PSU) have to connect the two connectors, the first connector is ATX 20 or 24, depending on the age of the motherboard, older boards have connector ATX 20 pin and the us have ATX + 20 4. The second connector to be inserted into the motherboard CPU power is on, this connector can be 4 or 8 pin, depending on the age of the motherboard, older motherboards (or entry level) have 4 pin connectors.
After I connected the motherboard, and other components must supply such as video card, optical drive, hard disk, SSD, etc. A good source has connectors dedicated video card and SATA, unless you have this, you can use adapters from Molex (5V + 12V) PCI Experess (12V) or from Molex to SATA (5V), Molex website is 4 conductors, two black (mass), one red (5v) and one yellow (12v), depending on what use Molex adapter site can help. My recommendation would be to use these adapters only temporary.
Operation of changing source is not complicated, just patience and attention.
An operation that keeps the air flow in the cabinet, but the issue is cable management. It's about laying cables through the housing so as not to be impeded airflow for better cooling vital components. A housing with an interior wiring clogged air flow will be weak and thus a faulty cooling components.
When it comes to cable management, carcass quality matters a lot, famous producers (Antec, Corsair, LianLi, Thermaltake, Chieftec, etc.) facilitates mounting and cable arrangement so we can have a very good cable management with minimum effort.
Even a cheap housing, a resourceful man can do good work, that you and imaginative than cable lengths and of course the source.
This tutorial is part of a series of tutorials dedicated to installing hardware components that includes these video tutorials:
How to mount a CPU cooler and RAM on the motherboard
The difference between a good and a poor source, connectors, noise and cold start sources
If you do not already have a good source, you can follow this tutorial dedicated achitionarii a source:
Buyer's Guide, how we choose the source computer
Before you plunge watch closely tutorial, beware of components and parts on the motherboard, some may be sensitive, too careful jacks sata of hard disk drives or optical drives, these jacks are very sensitive and can break very quickly, especially if you draw a sATA cable attached.
Above all, empower yourself with patience.
Good luck with that !
.................................... ..
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 700 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.Instructions for use videotutorial.ro
Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !
by Cristian Cismaru
View Comments (36)
Congratulations tutorial, Cristi! Would have to show how to make a Wire Management, or leave many cables disposed of there and not give good air circulation in the cabinet.
I noticed that source that you took it off was a Delux even have the courage to yourself a similar source in such a PC?
Delux site I mounted 2-3 days before (temporarily), normally system that functioned with a source Fortron Epsilon of 500W unfortunately fan it made an unbearable noise and anyway Vori to ask him another source, quieter now do not even realize you turn on your PC.
I will speak about cable management on these tutorials, it is generally difficult to do so without a good source and a well designed casing.
Each PC has in other parts, placed in different ways and does not know if someone will use a tutorial specifically for cable management.
With a little imagination you can hide cables to great art, no matter what shell you.
I saw a few months ago live a corsair housing and cable did not see any when I opened the lid, one that deserves a system configured 10, the truth is that the housing Corsair had done almost all the work.
http://www.corsair.com/pc-cases/obsidian-series-pc-case/obsidian-series-800d.html
Check this out!
Cables source (positioned below) come immediately behind the right pane and go where you need them.
Yes, you're right about a tutorial related to arranging cables, housings vary from one user to another, but it's worth something to present concepts related to this topic. I own a housing Segotep G2R Raynor and I can say pretty much helped me inclination such housing for cable management, source pity that we do not have the cable sleeve, but I do not mind the future may have to buy another.
useful for many, but it would have been more useful if you have shown us how to make jumpers, this really would have been a great help, however, and many thanks! :)
Follow the front panel and mounting community with close up and explanations, that for hobbyists.
Yes, you're right about arranging cables, housings vary from one user to another. I personally own a casing modest (it is a Segotep Raynor G2R) helped me a lot when it came to Wire Management, shame that I sleeve cables from the source, but I do not mind, you more layout .
I am glad that this site exists. It's much easier to understand how to work with a program or how to mount a video source if explain unless someone explain in writing.
Thanks for boys tutorials. We salute.
Thanks to you now I know in addition to what type of components to head (due to the realization of numerous giduri hardware) and now you know you mount but I optimize my system because VIDEOTUTORIAL site! THANK YOU for everything you do! :)
Very good ... But I would like to ask if it's not good for me to have a case with the source positioned down ???
It depends on preference and budget, often carcasses are more expensive because the source below the standard out of the box and everything comes out is more expensive.
At a cabinet source below need to have a good source, the cheap cables were too short to get them back.
If the body is not quality source positioned below will fill quickly with dust.
What has this configuration unit (cpu, gpu, ram etc)?
7 i2600 Intel, Nvidia GTX 460, 4 GB RAM
I just love guides like this, the ones filmed with the camera, you don't see much like that in Romanian, most of them are in English and those are few (not that those are not good, but it's different when you see a compatriot of yours doing -a). When you make another change to the system, e.g. changing the source do not hesitate to make a tutorial, I personally like to watch, being passionate about these things. We are also waiting for hardware guides, and maybe also unboxings (because we don't have much of them in Romania either) or reviews of what components you have bought before (or anything else related to this world of IT). I also want to set up a system (on paper that I will buy when I have the money). What I want to ask you is: For an Intel Core i5 processor, and the rest of the high-performance components, would the motherboard be good: Asrock H67M motherboard, socket 1155? I should look for the brand or the features, because it has almost everything I need (future proof). One more question because you are good at sources: For the above components plus a nice 4Gb ram, a 3, 1 Tb sata hard drive, and a Solid-State Drive (SSD) SSD Corsair Force GT 2.5 "60GB, SATA, CSSD- F60GBGT-BK, plus the case with a cooler and all kinds of lights, and at the moment not, but in the future maybe the most persormant video card, what source would you recommend me? I know it's an important component, but it doesn't let my heart I give more than 200 (250 with heart constraints) on a source, so I ask you.Thanks in advance, please 2 sentences to answer me (yes / no to the motherboard, and a source there at random get rid of me :)) and keep it up!
Depending on the video card that you purchase, you can look OCZ ZS Series after a Cooler Master GX 550W or 450W. That base plate is pretty crowded, alternatives such as Gigabyte GA-PH67-DS3-B3 or ASRock H61iCafe. I can say if you like overclocking will need to purchase a motherboard chipset P67 (disallows IGPU) or Z68 (OC + IGPU).
I never understood why Roman is ...
We want to have ... to be strong but not to spend ... we want to keep but not to give a lot of money, we want to be strong but if possible without high costs ...
There is no such thing! Do you want to fly to Mars? You need a super rocket, that's clear .... if not, than to do the job halfway or get lost halfway or never get to the end or where you left off, then go "on hand "of cheap improvisations, on the hand of chicks and so on ... you will only get headaches, frustrations and ugly carpses from a physical point of view and that will give you a restlessness and from a mental point of view.
If you want the best PC but do not want to give money to a healthy source drive you, then you want to you that you will buy power from the moon in a month and more to lose than you earn.
Grade 10 for the tutorial and for the site, it's very useful .... I'm waiting for a tutorial for connecting those many and thin cables: power, restart, led hdd, led power, I really struggled to find the right combination when I changed the source, no now I don't have an LED for hdd, because I didn't find it ... I managed to do it for power and restart.