Hi friends, this video tutorial will present a method to update firmware samsung optical drive (TSST Corp), this operation will be done in the operating system is a fairly simple job.
Update firmware is necessary to update some features that did not exist at time of product on the market or to correct some bugs, these bugs can occur because of very rapid launching products on the market or because immature firmware versions.
Many of you may have noticed the unit's optics some small problems, for example a few years ago my optical drive ASUS DVD-RW burn, but DVD + RW, the problem we solve it through a firmware update at the DVD RW optical drive.
The method presented in this video tutorial is valid for Samsung optical drives but the procedure may be similar (not identical) for several models, from different manufacturers, Samsung optical drives are recognized by Device Manager as "TSST Corp", do not be surprised if you do not see any inscription with the Samsung brand, even though you bought Samsung.
For complete safety throughout the firmware update, it is advisable to use a backup source for UPS (Uninterruptible Power Supply), if you know that you have problems with power supply, if you do not have problems with power is not it is absolutely necessary to use a UPS, however it does not take long to update the firmware of the optical drive.
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
Enjoy !
View Comments (40)
Hello Cristi,
I have a dvd-rw samsung sh-s182d that after a normal function of a 2 years (service and casual with a computer CD-RW for CD) appeared the following phenomenon: write CDs and DVDs but not May read (on other DVD go read) Do you have any opinion in this regard? intampla.L What could I put on another pc and the same unit.
CRISTI thank you for everything you do. you are what resembles cen-leader in the field of tiching.
Cristi: see can you do a tutorial about seagate hdd firmware update :)
Can do and see a Seagate HDD 320gb or a Wester Digital Caviar Green Deal 500gb am interested firewall updates
Thank you for your advice and if possible a small tutorial about Asus ODD firmware update.
I have a problem with my dvd-rw because when boot cd is a lot of noise that make them think that leads to the firmware update will fix the situation?
Cristi tutorials thanks for all you do. If you have time and do a tutorial and update BIOS. Thank you!
It's been a long time since this tutorial you want !!! Did you get so tired of typing up in the "Search on videotutorial.ro ..." box on the right: bios update and then enter ????
Congratulations for the tutorial, it was quite detailed :)
I did update the firmware after him and everything went perfect.
As you said it would be better if you do the firmware update tutorials on various products.
Best Wishes,
Cristi M.
ms long, I have a question for a driver cd for lg yum could give iauw site where you can sal
Hi there!
I don't know, I think with joy, about the novel - this tutorial - I have encountered a situation these days and I want to know if anyone else has been hit by it and what could be ..
Specifically, I receive a PC that says it would have a potentially defective hard drive, because at installation it gives "insufficient space", 20gb hard drive. I put it in the optical drive ... / partitiona, hardul.Acel cd only I did it, it's relatively new and it worked on all my PCs so far..but on this one, it doesn't boot..Well, the optical drive will be taken, I'll take another one Hiren and I try to boot ... the same thing, I mean nothing..I take out all the cables, boards, I only leave the DVD and I try to boot .. nothing..I think, it may be a bios virus that I've been hearing about..and I quickly make a floppy disk and update the bios ... after which I try to boot from the cd again..nothing..I changed a few optical drives, the IDE / SATA controllers, and nothing..In the end, I put that cd in another pc, it didn't open the cd at all and I conclude that the cd failed and I was trying to boot from it..even if there weren't many reasons for the failure, it was new, written at low speed ..
Another anomaly was that I started on a powermax floppy, hard drive and I visited, but the tests and trying to low level format, gave me the hardware is irreparably damaged and must be replaced .. I tried their utility and dedicated from Seagate, the same lucru.Vreau to mention that I especially PowerMax revived dozens of hard drives regardless of brand ..
Using another optical drive, I booted xpsp3, I ignored errors and installed, but I accidentally put the system on D instead of C..Ok, I install once again I say..and believing that so many Attempts something happened and it works..I try to boot the same sp3, but from the optical drive of the pc..and what to do..change the optical drives quickly, I put the one I installed again, and the same..no it still works..Having the impression of "deja-vu" .. I check the cd with sp3 on another pc..and it doesn't see it at all..as well as the one with hiren before..Ok also because these cds were from same company, I said that maybe they may have broken down maybe I kept them warm or they are of poor quality, and I also tried sp2 ... which in my optical drive booted, put in the original optical drive, did not went, put it in my unit and it still didn't work ,,, so this experience "cost" me 3 CDs ..
I mention that I put the DVD w7 on the original unit has booted but did not go further
after restart never booted nor any w7, but another surprise .. check dvd drive is still valid ..
And I mention that I looked to see if the drive in question scratched the CDs but no, they are in "perfect condition", only they can no longer be read ..: D
So in conclusion somehow that unit destroys CDs .. but how? What could it be? a defect or virus to activate write and overwrite cd?'s possible?
Yes it is possible, and should not necessarily be a virus! It is possible that the optical drive is defective have been damaged, hit, smashed, shattered, and have suffered a shock or that have shoved a broken CD and CD deformations to be moved or dezacsat laser beam focusing lens making the laser focus and concentration them to be higher than normal when reading and thus remove or simply burn the data are on CD.
I checked w7 dvd .. and go, so the guy did not crashed .. it seems to be selectively destroy only cd dvd.Ar not deserve a firmware update? Of course if you say mechanical failure, nothing but him fix ..
It's hard to believe that a shock might increase the power range, usually opposite happens ..