Hi friends, in this video tutorial I will show how to make a connection type bridge, it uses us to draw from one computer to another net when we can not connect on the latter network.
We make the bridge connection between network cards on the same computer, in conclusion the computer that "yes" clearly must have at least two network cards in order to bridge.
We can do a bridge connection to the wired network card with wired wireless or wired.
Wireless-wireless bridge can be done by using a router and an access point.
In the tutorial you'll see that it's easy to make a connection type bridge.
Many of us have written the comments box on the contact page and we've asked him to do a tutorial on this subject, for one reason or another not everyone has the router but has a second PC that they want him law the net. The bridge is necessary when we do not have the router when we can not connect to a wireless network than with your laptop or when you need to draw the net for a console or a television and we have no router. With a little imagination you will see that the bridge can be used in many more cases.
If you want to make a wireless-wireless bridge you need a router and an access point, our colleague Dan realized tutorial Configure wireless connection between a router and an access pointIt will help in configuring a wireless bridge.
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 800 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.Instructions for use videotutorial.ro
Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !
by Cristian Cismaru
View Comments (74)
I not really understand. What thread out of your laptop? Type of cable type RJ2 45 heads as you did in the previous tutorial? I mean jack RJ45 enter one piece and one piece jack laptop RJ45 enter the desktop?
Yes, you guessed correctly.
Between Laptop and Desktop is an absolutely normal net cable (not crossover), just like we did in the last tutorial.
https://www.videotutorial.ro/?p=9145
Hello Cristi, Can I have some advice, I have a motherboard old socket 462 (A) to which I voltage correct 2,5V the memories, replace, to have 2,5V I 3,3V and does not turn to enter the BIOS, just It starts so simply does not illuminate anything, monitor, keyboard NumLock light, is dead. If memory piuiee them out long after and etc. What do you think would be any problem after motherboard voltage regulator, as the board had gone Test win on it and worked it second time has not started to hurt something in it. I still have those two boards just do not have the correct tension has 2,5V on 3,3V and those memories just does not show bios. You advise me? If you do not throw it, get after it and ready Condes.
Has anyone ever told you, you reset the BIOS.
By the way, what do you need capacitors that old, do collection?
It would be great to do a tutorial how to do file sharing high speed cable or UTP net ie without router and PC and laptop ex numa. and if you do you could do and between xp and windows to 8 7 or so by UTP
tineo all so super tutorial
Hello Cristi, super tutorial, but I'd like you can a tutorial about crossover because I have an older computer and I'd like to copy all pictures of him and to the new computer does not have ATA I only SATA and from what I have read so far is You can connected computers with a crossover thread but not really understood so well what I have to do that work. Thank you in advance.
But if we net from RDS and ethernet port is busy this would mean that more buy a network card? And to have the other computer net would mean first computer to keep open continuously?
Well no, not understand visitor who told me no, it's more complicated than it has to correct voltage memory 2,5V the memories I have 3,3V and not start doing nothing spins from the CPU cooler and so remain. On it is an AMD Duron to 750mhz and regulatory starts the memories are not cold, and those from the processor are hot, do not go I 2,5V voltage to be understood more clearly from what can be? I still have all the 2 462 ASRock boards one and another on 478 socket and so I 2,5V 3,3V and so I will not start spinning just doing nothing, no nothing piu. It's like you hold down the Reset button on the housing so as. So I 2,5V voltage from a masseur memories of 2,5V Pinu and I look 3,3V has burned, maybe you know, if they make out all condesatorii (sources, other motherboard, etc.)
Nobody even knows what may be the northbridge, and any regulator has 3.3V 2.5V not as it should be normal, any capacitor something, Cristi really do not know what may have? BIOS automatically reset has no battery, as I removed it was dead 0.48V :)) does not turn on the BIOS nothing appears on the screen, she spins the processor cooler and remains so, regulators are cold ice, only those from the processor are hot little, and would be a problem it on wiring in the area where it northbridge is more yellow so has a different color than cablujul normal which it was hot harm the northbridge but I said she once worked with Windows and has not started. ((
How old is the motherboard?
Mainboard nor mine was a friend and gave me a said that he took i5 and he was also not enter back at him on the team viewer to him anymore updates, scans, and so on so it goes
I also have NOT from him, so two more tiles that same buba has one socket 478 ASROCK, and another Albatron socket 939 DDR 1 normal and so do not leave, do not light up in bios but not beeping not anything so just sit spins from the CPU cooler, so. So Cristi me to the bank to have my memories out 2.5V and that does not happen we 3.3V something but do not know what's broken. But excuse me as commuri box filled with problems. but that's my need to solve.
Cristi does not go on about Google AdSense tutorial ??
I shook my mistake and I remembered that he has no further.
Your tutorials very useful, can I learn more and do what my heart wants to appeal to your home without aid
Itrebare:
Can I make this connection between a PC and a TV (data cable) If YES, how is it done?