VIDEOTUTORIAL.RO

View Comments (27)

• what kind of film that is filmed darkening the square so to speak? and not for the world tota solution if you have linux distribution is based ain order that tells you pb with rami

• and for me it automatically chooses legacy or uefi. I don't have to change my CV. I have UEFI bios

• Hello! I also have a problem with my laptop and if you find a solution, please do a tutorial. I installed Windows 10 on SSD (Samsung 840 Evo) + drivers, etc. When I reconnect the HDD back, Windows does not the HDD sees it, than the Bios sees it. The SDS is formatted GPT and the HDD is MBR. I tried to install Windows 7, and on 7 after I finish the installation and reconnect the hard disk- The laptop has no problem, instead the 10 jumps on the damblaua and he doesn't see it, neither in Device Manager, nor in Disk Management, nor in the command line, nowhere ... Until 2 days ago it was going well and with 10 installed in UEFI mode, and the hard disk very well, everything works. Now it doesn't want any color with 10, because I installed it for trial and in legacy mode and in vain. I rubbed it today many times , yes with 7, yes with 10. In Windows 7 it works, in Windows 10 no, Yes I even installed it and with the had-disk connected to see, I thought that if I only leave the ssd during the installation , maybe he recovers, in vain! What would be the bug and how can I fix it. The phase is that I don't want to go to the hard drive because I have important things on it. Where can I post the video to see exactly what is happening?

• try a bios update

• I have been using memtest for over 5-6 years.
  I already knew the schedule. One pass is enough, you don't need more (if you put your PC in service, I don't think it will last for hours just to test a poor memory).
  This program never disappointed me. I consider the program essential for any IT troubleshooter. If you work in the IT field (in service) you can't miss a memtest; if you clearly miss it in vain you work.

• CICA few Rewriting me .. I knew that RAM can be written to infinity. Since there are capacitor charging and download diodes do not flash. Infine .. but do not think I need to say more still do not think mise approve this comment

• I didn't pay much attention to the pass ... when testing memories. I was watching how much% tested from EA ... sometimes it gave me error when it was nearing the end. SO the program must be allowed to test for some time. Yes in about 15 to 20 minutes if something goes wrong.

• @ Dan
  E volatile memory, is why they load and unload whatever.

  Cristi.

  With this software you can't identify if 2 memories are 100% compatible with each other, I say if they are a different series or manufacturer. It is another similar application as a test method.

• Dan who is the personality who responded to the comment with my nickname?

• Very good tutorials and how many.
  You can do a tutorial on how CHDK on Canon cameras.
  Thank you.

• Hello, I would need help: I ​​ran the memtest program and after 30 seconds my computer shuts down, should the processor become hot? I mention that I have an amd athlon processor overclocked to amd phenom (not by me) stock cooler and the thermal paste has not been changed (so the paste is 4 years old). In fact, such crashes were the reason why I ran a memtest. And to put you even more in the fog when I start the computer often does not want to boot in windows or it crashes, it works hard, rarely when it feels like going fast at first (I also checked the hard drive with cristaldiskinfo and it tells me that ii good) although I noticed that when I turn on the computer and want to boot in windows the red light on the case often goes out and stays like that (obviously the boot process is blocked) (please excuse me but I forgot what it means these two light bulbs the one with the red cylinder and the one with the green light I know that one is from the hard drive or processor). I apologize for the inconvenience and the description is a bit unclear. Thank you !

• It is possible to restart due to overheating or even because memories.

• Thank you, we are replacing paste to the processor and I still buy a ram plate.

• so I don't understand anything anymore ... today I got the ram memory, a kingston of 4gb ddr3 at 1600mhz cl11 (the memory that is on the computer and that gave me the headache is zeppelin of 4gb ddr3 at 1333 mhz, the board the basic is asrock 880gm it supports 1333 mhz without overclock and up to 2100 or something like overclock, and it also supports dual channel). I put the new memory (kingston) together with the old one, I let it start and nothing boots. I take out the old one and let the new one boot, and I try the other way around and it boots like that (with the old one in single channel). I'm thinking of resetting his bios, said and done I removed the battery, I moved that cover over the other contacts, I put it back and I put the new memory alone (single channel), it boots perfectly, then I give it to run memtest and I leave it for an hour, after a step and a half I got bored and considering that it ran perfectly I closed the test. I go on, I stay on youtube, etc., and I see that it works, I stop it and put it back next to the new memory on the old one, again, no movement from the computer. I remove the new memory and leave the old one, it boots (the right ones don't like the new one), but this time it also runs a memtest, passes the first pass and no error. In this case, what do I do, considering that the memories don't want to work together. Although that's how I knew, that's what the people I bought from told me that it has to work only because these new memories don't work. to go to the frequency of 1600 but to 1333. Thank you in advance!

• Did you check that Max Bandwidth to be the same? This is also the reason why it does not start with both memories installed.
  Speaking of CL that, with the lower the amount of both memory is faster.

• zeppelin 4 gb ddr3 1333mhz cl9 ZE-ddr3- 4G1333b (hold many info about it)
  kingston ValueRam 4 gb ddr3 1600mhz CL11 srx8 low profile [# 523669 | KVR16N11S8 / 4].
  Start by running together, boots and 8 gb recognize my window, I am.uitat and AMD overdrive and bios and thousands admits to 1333 MHz dual channel, just like this morning when I gave it a test run 6% in memtest stopped on the computer (setup was this: cele.doua memory in dual channel and overclock the CPU (the release of a core of the phenom athlon)). Now I reset the BIOS, CPU normal as I left the factory, and I gave him to run memtest, are 30% and I do not have an error

• I forgot to tell you that in the upper left memtest under cpu clk are L1 cahe and L2 cache. L1 row to show me 128k 38737 mb / s (old memory zeppelin) and L2 shows me 512k 17245 mb / s down below them Scriri Memory 8191M 4292 mb / s (new kingston memory)

• ready to solve the problem is the processor, because averclockului heats up and stops, we found that because every time you run the memtest with shock settings closes, and every time I run continuously without going oc. I'm sorry to bother you !

• I apologize for posts elsewhere, and I now go back and put overclock settings. Tomorrow let him appear in memtest and if something's not right post, I hope I do not become too insistent. Once again thank you!

• Anybody knows about about how many hours you gotta let you go?

• That's exactly what I was thinking: about how long does it last? I think it depends on the configuration but I was still thinking about a landmark ...