System configuration with a very good value for money - HD video tutorial

In this tutorial we will go to the store to buy a system is one online store.

Configuring a system must be made taking into account many factors, first of all components must be in the current generation, which is to be built on the latest technology to avoid premature aging.

Often in our stores are trying to sell our moral aging components, they attract us with a printer or keyboard gift we thrust on moral expired products.

A few days ago I had the opportunity to see a large hyper purchased from a small market and I was not surprised when I opened the cover and saw a motherboard built around a 945g chipset from Intel, the chipset has existed quite large and obviously can not meet the current requirements. All received the same person at the gift shop and a printer, he was excited by the printer but did not know that he has just bought a carrion system, then I wonder why he goes bad system that has just bought.

Many people do not even know what components they have in the computer, they say they have an "ultrapro" system.

You have to understand that a computer is not like a TV or a refrigerator, the computer is a unit made up of several components with "personality", those components do not matter the "ultrapro" case.

Manufacturers stick on the back of the computer and some seals that do not we see what crap they put them there parts.

Besides when you are hurt you have to go with him in his arms to her, why not just go with the faulty component?

Make sure the system will do, do not trust friends mediocre best researched you with your mind, go on test sites where you can find reviews on the components you want to purchase.

Investigate before you throw money, just have not stolen that money, you must get as much for the money.

The system that I set myself today have a guide, if you can change here and there but basically I would advise you not to remove too much of the system, even if the change would be good to make up, not give up quality for price.

Take care where the money goes!

Cristian Cismaru


Get the Flash Player to see the video.


Related Tutorials



About Cristian Cismaru

I like everything related to IT&C, I like to share the experience and information I accumulate every day.
Learn as you learn!

Comments

  1. jemavi said

    greeting cards for Cristi tutorial.
    but we have a problem how do BIOS is hard to do?

    I try to make a youtube type site. I'm not as in PCs but if you do not risk anything you want to keep hosting my PC as a PC-hour stay in the socket I need a good cooling I thought I'd make them one hydrogen-5- 10 degree can cause the procesador?

  2. @jemavi: Take it easy man.
    Firstly the bios i do not have to do anything that is already there in the face.
    The site held at your home, I think it is a good idea in the first place does not have a guaranteed bandwidth for such a site.
    I advise you to start on a server hosting starts at 3 subscription per month, I think you will pay only the current 3 more per month.
    When will increase by site move a virtual server and one for the final.
    About cool stuff you do not know where the hydrogen concluded, I have not heard of cooling hydrogen, can you meant fluid or freon Azoty honestly think you do not need cooling so radical, such a system cooling can be used only by users with a very high overclock esperienta for a short period.
    In servrul need anything, no sophisticated cooling to servers often opt for semi-passive cooling, that the processor is a passive cooler blowing more fans, in case you break down a ventilator others remain finctioneaza That is called redundancy and word order when it comes to servers, the server must have redundancy for all to hard disk, power, fans, net connection.

  3. Hello, I want to congratulate you for tutorial.Este beautifully done, details about each component.

  4. navzar said

    Hello, congratulations for tutorial, I like to give details about each component. but a sg question: when you bought the motherboard, in the basket you had 2 quantities, is it a mistake or… ..

  5. navzar said

    aolooooo nonsense what are they :)), now you see k at the end you rectified… I didn't notice… .sorry;)), good luck

  6. jemavi said

    Cristi, I have a question if you want to help me with a small response.
    temperature memory card is 66 * C when starting up pc stop it nor climb nor decreases.

    air has enough fans are made correctly.

    that would be the problem is the temperature, are designed to work in temperature so?

    I have not tried it yet either but once I changed recently and I installed everest Procesadora measure for temperature.

    this gives me

    Temperatures
    37 ° C Motherboard (99 ° F)
    CPU 25 ° C (77 ° F)
    MCP 66 ° C (147 ° F)
    Aux 29 ° C (84 ° F)

  7. Very well done tutorial, maybe in the near future find out more details about each component separately!

  8. dumitru32 said

    very interesting topic you've achieved, I think it would be wrong to present something we hardwire and further. Good luck!

  9. CORLEONE said

    Hello friend Cristi, is super but please I do one about SQL injectabin :)) SUCCESS

  10. @jemavi: There's nothing to worry about, you look good temperatures.
    If you do not have to overclock worries, additional fans do not have any reason your install.

  11. @CORLEONEHi Corleone, I do not know what does the tutorial to SQL injection.
    I do not think she'll realize such a tutorial.

  12. Cristi250 said

    Congratulations cristi-admin you some exceptional and interesting tutorials. Especially I liked the tutorial very much and I have learned some very interesting things that help me when I will buy a new PC! Nultumesc encoded and do a great job.

  13. Andrew said

    Yeah, but you got a price about Maricel. The other tutorial was relatively similar for all pockets.
    I still am just 2 fans on the motherboard and the power it should May I ask any one?

  14. @Andrew: Do not go overboard with fans, if you have a good airflow in the case is OK.
    For modern housings, there must be 1-2 fans in the front that put fresh air in the housing and one in the back that together with the source draws the heated air.
    All carcases new sources is positioned at the bottom that can hold cold as the bottom of the casing is cooler air.
    If the source is cold it will not shift fan so loud and so will be quieter.
    Besides cooling and quiet you need to have the PC.
    If you want a quiet and cool PC must have a case as you can not get good performance and quiet operation with ron 80 skeleton, and they are good but for limited periods.

  15. haosss said

    bv Cristi…. honestly I was not interested in the tutorial already having 2 systems, but you amaze me more and more with your patience> [all kinds of details, etc.….] >> if you want <<<…. I vash ask you to do more tutorials with several lesser known programs but which are very useful… like NLite d kre I had only heard from you on the site… much bft still…

  16. Andrei Lucian said

    you had a tutorial with a program that opened files with the .nfo extension… what was it called?

  17. Adrian said

    @Andrei Lucian: Type up to search Damn nfo… you can open them with the right click on the file then open with notepad 😉

  18. Sal would like to help me with something on the video card min.
    I have a plate 6200 LGA in everest tells me I 64 mb (turbo Chacha 256 mb) I'd like to help me do the 256. I loat last draivar from them on my site .and all a bit wacky moves fifa 08 (800 game details in low resolution gave somewhat leam to move da moves reloare) I overclokato with nTune to 500 mhz and 620 basu from memory and move a tad bn than normal. ajutatima and something plssss min. thank you very much

  19. Andrei Lucian said

    but like with notepad + +

  20. haosss said

    @ Andrey lucian:
    bai ADRIAN wanted to help you dak nuti like use something else or don't try …… anyway I don't want to make a controversy ………
    success….

  21. Robert said

    Hello Cristi. Very good tutorial, I am a systems engineer and did a good job. I entertain some opinions and even ask them questions that your users, but no one is born learned. Regarding the configuration found on my desk Horizon 22 inch tv tuner is very good, the company where I work have sold hundreds of models and nobody came with problems. I put a little above the chapter MSI motherboards, and guarantees mean that the problems they face every day, all fan ATI, Intel, etc. are so to say with slight differences. Regarding the source that you chose is a good one, do not argue, I recommend Fortron, cooler master or Chieftec even more strange that hipro model name but extraordinarily good and say that based on tests, measuring voltages and freceventele Oscillation. It's a balanced, very good for a home user so to speak. I congratulate the team have come up with a new idea that good and I think it helps a lot of people when they need an answer.

  22. @RobertThanks for the review, we are happy to have with us specialists who appreciate our work.
    Are you still waiting for you by us, even when you're gonna amendments made.

  23. Fanibu said

    @Andrei Lucian: Open with wordpad

  24. Cristi250 said

    I have a question: What is good to buy the parts 1 PC. let's go to stores to look or 2. to order on the net all we need?
    And one more thing: If I order a product from the internet, let's say it comes to my house and I give them the money then or how… or do I give money from the card something?

    Thank you in advance !

  25. Andrew said

    Bravo..a great tutorial..only I STILL are scared by the thought that the most expensive piece is… SOURCE 🙂

  26. Adrian said

    @Cristi250: I got my pc through emag… you can do as you want, or buy them online or from the store, but from stores they are a little more expensive and it is not known if you can find what you want to get, I know as at eMag if you buy worth 10 million you are provided with free transport !! If not, for transport you give around 200 thousand old lei, now it depends on the policy of each store / site ... it depends on where you buy. I took it from eMag and I am satisfied, I had no problems with anything! The choice is yours!

  27. Cornel said

    Honestly, I follow your site daily. I like ff a lot. My experience in computers is much above average (I have been working as a programmer for 5 years and as a PC technician for 7 years - 3 employees and 4 on my own), but I really like what you do. Not everyone is equally good and even if the details sometimes become annoying, many use what you say. I ended up in the situation of not wanting to bother with all the beginners and when possible I give them addresses on your site about their problems.

    But, one thing would be useful: make a forum for your loved ones, where people can ask pessimistic questions that have nothing to do with the current topic. For example, here they found out that they want a sql injection tutorial, only the comments related to the current topics should be kept, and the rest on the forum! It would be even easier to search, it would be even more structured… For example it could be a column about “What tutorial would you like us to do…”. (By the way: if someone is so "strong" as to try SQL injection, to look on the net that it's full of fun… either in Romanian or in English.)

    Again congratulations, and I hope to continue as before.
    Carcotasii not than not visiting the site.

    Cornel A.

  28. Fanibu said

    @Cornel: Dear Cornel… I didn't understand anything from your CV… ”My experience in computers is much above average (I have been working as a programmer for 5 years and as a PC technician for 7 years - 3 employees and 4 on my own)”… etc.
    I also have a request… don't talk on the net anymore… that is, don't hit the water on the tap, besides the subject.
    The tutorial tries to clarify those who want to buy a new PC… about how much money they need… how to save on the choice of components… how to get performance with little money and not face on I do not know what forum.
    PS… .What Carcotasi? the ones from Prima TV?
    I think you're funny… about all sorts of nonsense NO?

  29. Cristi250 said

    Thanks for the tip Adrian. Thanks much help

  30. Marius 512 said

    What do you mean to have the motherboard 4 alimentare.Unde phases have to watch to see that the specification of a plate?

  31. @Marius 512: You have looked closely at the tutorial, if you forget them you'd have realized.
    Tutorials attentive folks because they contain a lot of information, do not scroll as movies, these are not movies.
    These video tutorials contain information highly compressed and therefore may contain something important every second.

  32. hi a very good tutorial luck still expect a tutorial advertising sites in general if you gain something from it

  33. viorelpicu said

    @AdrianHi Adrian,
    I'm facing another problem:
    I'm from Resita and do not mind the shipping fee regardless of the store (are aprox.apropiate value), but the problem is when capoteaza a component, you have to send in Bucharest wait long enough, ENSP phones (I understand that in situations that boys are not too prompt) chetuiti money, etc.Parca I'd be tempted to buy components in Resita, sure cca.10% more expensive but in case of failure of a component in my sight I got them all day and I can argue with them viu.Si in one case and in the other we stand with Warranty (system I install it myself, to see what I sent to my order), will say that I am not the job and because of that a component has failed or not?. AVRE your opinion on scurt.Cu esteem for the whole team.

  34. Marius 512 said

    I looked closely, but with a ram and 128 440 calculatorla MHz Katmai, a sound before the picture is blocked. It's good to 20 mil.Deocamdata system but if you would like to recommend something I even used that to run well tutorialele.Nu are gamer so strng 20 mil.ce temporary system to recommend?

  35. Cornel said

    @ Fanibu
    Dear Mr. Fanibu:

    1 - From my "CV" you had to understand 2 things:
    - a - I have experience as a PC technician (this means not only that I know how to sell computers, but that I know how to repair them) - in 7 years of teaching I have encountered "some" configurations and problems related to this, and I know how to appreciate a HW configuration done correctly;
    - b - I have 5 years of experience as a programmer, this means that I can give a humble opinion about a program that is worthwhile and one that is not.

    2 - I would greatly appreciate if you could give me an exact answer (clear and concise) what fable you saw in my comment and I promise I will apologize publicly if you are right.

    3 - From the connection you made between the term “carcotas” used by me (which exists in DEX) and the TV show, I can conclude the following sure fact: during the day you watch TV, and in the evening you go in and make hilarious comments on the site. hate that allows this.
    - When I mentioned carcotasi, I was referring to those people who enter the site (and there are enough - I follow the site for a long time), who enter and find all kinds of chichite: that you have vb too fast, that of in fact, the program you presented doesn't make 2 bucks, stuff like that. Those who do not know how to present a different point of view in a high and pertinent way, are called carcotasi, or in the popular libation "Gica Contra". The kind of people who sit with their hands in their pockets puff when someone tries to do a good thing.

    I'd be thrilled if Mr. Cristi would validate my comment and if you would be published, so do not try to cause offense to anyone, but to justify what I wanted to say first.

    Once again congratulations to the site and I promise I will follow closely, but it will be my last comment to not allow other children to mock what I say.

    Much continued success.

    Cornel A.

  36. Adrian said

    @Cornel: I don't think that Mr. Fanibu wanted to offend you, but only to "emphasize" more subtly the fact that it is irrelevant that you have a certain experience… adik… and I can say that I am from CISCO who will believe me? But this is not the role of comments to say how much we have in the field or how much we have studied but to give opinions to share with others the knowledge we have, and share suggestions, answers, problems, it is less important that you are a doctor or not experience because these can't be tested here anyway! None of you made a mistake but it was misinterpreted, and please don't start a "dispute" here because it doesn't make sense! Let's share our experience and not just say we have it or not! I don't think that someone who comes to you to repair or configure their PC will ask for a diploma or ask you what experience you have in the field !!

  37. Adrian said

    @Cornel: It would have been much better to give an answer to Mr. marius 512 who commented on you and needs advice than to give "course" to discussions or "small stings" from another user!

  38. haosss said

    @ Adrian:
    I refrain from saying how many CVs, but it would be better to let other admins or people from the site administration to "extinguish" these small conflicts.

    POLEMIK not want to do.

    BFT

  39. Adrian said

    @haosss: If you think I like to bite my bag that I can not do, you are wrong, are moderator and please search for the word moderator then give me advice and I reproached me my bag! How do you know my rights or not on this site?

  40. Cornel said

    @ Adrian:

    <>

    Adriane, I hope you understand that if I said what I said about my experience, as Mr Robert:

    <>

    I made it my ration diplomas, but I wanted to say that: I have a little background in what they do and especially in the field where I did the initial review.

    So here it matter that would not know the doctor, but if it's one when someone comes and says:

    - Hi! I am a bricklayer by trade; I just got my computer the other day, so I'm not very good at it, but I think you're right about what you say in tutorial X.

    and quite another thing when someone comes and says:

    - Hi! I am a computer engineer, I finished college and master's degree, I have 7 years of experience in PC service and 5 years of experience in programming and I think you did a quality tutorial.

    If experience counts, the weight in mind, then what does it matter? The relationship with Basescu?

    And as PC repair, you take your PC to a shoemaker for repair (or let's say a lawyer, not me wrong) not seen tracing his life?

    What do you think? Adriane, in case you did not notice, I will appreciate just work, and that as a man working in the field. Frankly, I'm terribly sorry that I ever expressed opinion on this and I solemnly promise that I will do, whatever response you give me, but not so easy to throw mud left and right, until the read carefully what you write someone. If you keep the one, even daily girl. Out of curiosity, what college you're done? How many years work in computers?

    I'd like, please see the message that is posted on site and are more lightly, whatever you give replies.

  41. Adrian said

    @Cornel: We just explained above that it doesn't matter what experience you have, when you give a comment here, because no one can prove if you are telling the truth or lying, I can say that I don't believe you… and maybe others will say the same! !! Behind a monitor you can be anyone, it is not valid only in this case but for most, let's give useful advice and leave aside the fact that we worked for NASa or BilGates… above user who really is undeserved still didn't help you !!! Although you claim in 2 that you have a lot of experience… ok and what good is it if you don't help another one? Do you think that the fact that you have experience helps me in any way? We would do better and prove something than to punch each other in the chest for 5 years and for 7 years working with PCs PC I would appreciate more the involvement of users and not praise !!! Self-praise is known not to smell good, Giving some good advice means that you are really in the field and you know or that you have a certain experience without having to explain to someone or tell them who you are !!! Fanibu gave a lot of advice here and never boasted that he has been in this guild for I don't know how many years !! I'm not taking anyone's side but let's do it not to brag !!! As I said above, it would have been different to give an answer to marius 512 than to follow my words or those of Fanibu !! I guarantee you that I am impartial and do not care about either Fanibu or you.

  42. Fanibu said

    @Cornel: Allegorical fable is a brief story, usually in verse, in which the author, personifying animals, plants and things satirizes some morals, skills, attitudes and mistakes in order to correct them. It has the following structure: the actual story and moral. Figure of speech is personification.
    Hence:
    "I have come to the point where I don't want to bother with all the beginners and when I can I can give them addresses on your site about their problems."

    "But one thing would be useful: make a forum for your loved ones, where people can ask pessimistic questions that have nothing to do with the current topic. For example, here they found out that they want a sql injection tutorial, only the comments related to the current topics should be kept, and the rest on the forum! It would be even easier to search, it would be even more structured… For example it could be a column about “What tutorial would you like us to do…”. (By the way: if someone is so "strong" as to try SQL injection, to look on the net that it's full of fun… either in Romanian or in English.)
    The only thing they don't have is to not visit the site. "

    Since we did not want and do not want ever to bring prjudicii this site that hosts us, I have a habit apologize if I was a bit harsh in characterization.
    Adrian is right in what he says above.
    Let's not flaunting studies, preparation or CVs or Tree, but to be humble, ask questions as everyone knows and those who can give answers or comment to.
    Please come back to the site (don't get upset too fast… of course I'm kidding)
    and do what we all do… we collaborate and we are friends
    Please send-positive.
    PS That's how I made a lot of friends… "arguing" and then reconciling. I never do it with malice and often I'm really sorry. It's not good to play with human feelings and soul.
    Now get to work as it cools website.

  43. tutoriaal Kandi a lot about power point, please tell me pls

  44. Yeah! Dear dear lady !! Beyond, it was cheaper !!… .And with the controversies..You're done with these nonsense!

  45. haosss said

    @ Adrian:
    1. I said "I DON'T WANT TO MAKE A CONTROVERSY"
    2. I said for most of the conflicts that take place because you are the main character…
    3. I said k to intervene another ADMIN or ADMINISTRATOR ptr k I knew that in turn Cornel itzi will give a reply… DC? Because most users already have 2,3 comments, they have seen other tutorials on the site, by default and comments, mostly…. reading the comments sut all sorts of conflicts in which you defend u and you see kd few times you are right…. >>> from here they also have the audacity… <<
    4. Do you appear in many conflicts? ptr k many t provoke [like AEROSOL], and u instead of leaving with their comments d nimik ANSWER THE CHALLENGES, or from many comments SUBINTZELEGI UK WOULD BE NUSH HOW….
    5. I know what function you gave to a certain comment of a tutorial [I don't know exactly which one] in which LUCIANGL said that you are admin…
    6. I said it would be better if you didn't intervene u mai. it was an opinion, not an order…
    7. I didn't want it to be understood that you understood u…
    8.I didn't want to offend you so you understood ha
    9.I really appreciate your work even though you think I'm a parasite on the site
    10. I hope the topic can be closed here…

    BFT

  46. marius said

    Hello! Now that we have bought all the components you don't show us how to assemble them :))…
    It would be cool to make a tutorial on installing a PC, not for. me but for others that certainly needed.
    Tutorial 10+… of all beauty.

  47. beb3_mykk said

    Lume LUmee we should share our opinions not brag k we have 20 years of experience in… pc..trb to share with others we were not born learned ..CI WE LEARN… .with we all know something and we can share them ..opinions. opinions and much more etc..ORICUm 10 for tutorial..still ..kam expensive for some: D although it's a great system !!!!

  48. Stefanhellzone said

    hi a very bun.Eu tutorial are beginner and do not really understand what he wanted to say Christ as the ram 1200 frequency can be gotten only by means overclok overclock.Ce?

  49. Adrian said

    @Stefanhellzone: Read the comments above I explained odataaaaaaaaa.CITITI BROTHERS comment before posting CAD YOUR EYES WILL IF YOU READ AND some text!

  50. Adrian said

    @Stefanhellzone: Overclock mean strain components to get extra performance! An overclock is achieved by changing frequency and numai.Sunt not overclock sites give tutorials on someone else to look? Write up the search in the right Overclock hit enter and you will find them!

  51. Stefanhellzone said

    ms Adrian, if you could enlighten ChaCha's what is used in court?

  52. Cristi says in tutorial dak frequently change the video card in the game somehow sacadeaza cv where to change these settings? for k have a good video card and FIFA source 09 I sacadeaza more

  53. Andrew said

    Hello I want and can dak him an ID or email address of Mr. Robert and Mr. cornmel, thank you!

  54. Cristi you said in the tutorial that you can change settings on the video card of frequency or CV… as I had to do in case I change those frames there because I have a pretty good board and it still drops in my fifa 09

  55. Adrian said

    @Dany: Write up the search in the right nVidia or nVidia video card overclock or just overclock! To make a good overclock you need a good source strong!

  56. Yes give u should not do not understand where to set my overclock nush dl video card there said Cristi freq or how when I bought k dak sacadeaza you a little something to get into the panel and set the video card do not need overclock

  57. Adrian said

    @Dany: What do you still overclock is called! To access these settings in the video card nVidia nTune you need! or you would like to change and it must watch tutorial overclock nVidia video card, if you do not understand your response asa.Acelasi stick with it will give him or Boby Cristi!

  58. Fanibu said

    @Cristi-admin: Fans are also waiting for Camtasia settings and winSPC

  59. Stefanhellzone said

    would be best if you could do a tutorial on installing components and cablurilor.Multi not know where to put some cables.

  60. Ion aas said

    asdasdasd

  61. I did a yum blog, please Tell me if it is good crist this blog, thank you to all the team for your videotutorialele Comment depre let my blog http://fileextra09.wordpress.com

  62. viorelpicu said

    Hello Cristi-admin
    I watched the tutorial again and I went on FAME and I got some confusion:
    -The choice of the optical unit, namely Filter by interface: IDE, E-IDE, PATA, SATA, S-ATA.Care is the difference between SATA and S-ATA E-IDE and between IDE and PATA.Stiu as parallel ATA PATA and SATA is serial ATA and that they are current in my urma.Dilema you have to choose my DVD-RW and not know what to choose SATA or S-ATA.
    -When choosing components worth keeping in mind for the EMAG nr.de stars and comments accompanying the product of different users?. (For ex.dvd rw chosen by you in the tutorial has 3 stars and many dislike about it)
    You are so cool and thank ptr.tot you do for us novices.
    I salute you and I a short answer from you or any competent person.

  63. bogdan said

    mai..asteptam..deastea..cu..bani..pe..net hard ... .......

  64. viorelpicu said

    ptr.cristi admin
    probably my questions will seem puierile again but I still insist:
    I have an Asus motherboard with bus 5 p1333kpl I and I is enough, instead I pick frecv.ram to 1066 (supplier says it can by OC)
    -I 1066 ram (kingston ddr2 1066 / 2g
    -I CPU e5200 and I want to raise the FSB from native 800 1066
    -Going to get a source 450w sirtec Active PFC with a casing fan 80m foxcon
    I know I have a motherboard super modest but with time I hope I refocus altceva.Intrebarea is: This OC is a rough shag as you say, or something decent limits without too much overload the system (in this case that pb recognize that it may be one of the worst business)
    Thanks and Regards wait raspuns.Va welcome.

  65. viorelpicu said

    Returning to the previous post and this: I want to get in line to 1066.Cer too much?

  66. @viorelpicu: Unfortunately I do not think that memory would support change if it is a memory overclock, overclock memories have on them coolere passive aluminum or copper (rarely) too, must have performance chips that have a certain flexibility, memories overclock are slightly more expensive than normal memories.
    I have an Adata XPG Extreme Edition 800x even before this I had a chit 800 + XPG Extreme Edition, although the difference does not seem large (800x round. 800 +) Please believe me that is huge difference between them.
    But back to your case, if you do not overclock I think I feel a difference in everyday use and in my opinion the risks are bigger than the benefits in this case.
    A good overclock involves raising the CPU frequency, memory, FSB, and of course setting proper voltages for each one, that to achieve stability.
    You can still try to overclock but do be prepared to reset the BIOS whenever necessary, reset the BIOS is done by removing the battery from the motherboard, of course with the system disconnected from the network.
    If you do not start some settings and not worry PC simply be reset bios and ready, then you can start again with overclock.
    First of all you should make a backup and everything important on your hard disk including the operating system.
    Overclocking is not easy but it is an operation that can provide satisfaction for enthusiasts, often the performance is very high, you can get up to 80-90% with air cooling systems without high costs, you need a good source, processor with potential, stable motherboard and a mature bios, memories with "elasticity" in overclocking, this does not necessarily mean expensive components.
    When you overclock you take some risks and that is why many are reluctant to give advice or guidance.
    No other PC does not match and therefore not fit overclock settings from one configuration to another.
    SUCCESS.

  67. Tigrutzu said

    Very useful tutorial as usual cristi doing the best tutorial tutorials expect that about songs like that are very useful, bravo!

  68. viorelpicu said

    @Cristi-admin: Thanks Cristi pt.raspuns.Cred I leave them as they are default.M OC would be tempted because I forgot to specific memory is that smart you're talking about, that Kingston 2gb / 1066mhz / hiperX, CL5, radiator on it.
    And one more question: What is dual channel or 2x1gb 1x2gb favorite and why? In a tutorial telling him that dual channel manufacturer tested and mated parameters midwife to work in close identici.Mai there are other advantages? 1x2gb I walk because my board has only 2 memory slots and I wish I can be the case when you can put another 2gb (identical to existing ones). Sincerely and respectfully.

  69. covimarius said

    Hello! Mr. Admin Cristi can you help me with something please…
    I put in my plan to buy a new system because the old one I do
    Figures.
    I found something on the internet and in my opinion it seems a good system:
    I'd like you to tell me if it's a good system ..and if I can play recent games…

    Processor:
    Manufacturer: INTEL
    Socket: 775
    Type: Quad Core 2
    Model: Q6700
    Processor frequency (GHz): 2.66
    Front Side Bus (FSB) (MHz): 1066

    Memory:
    Type: DDR 2
    Capacity (MB): 2048
    Maximum Capacity (MB): 4096
    Frequency (MHz): 667

    Hard Disk:
    Interface: SATA
    Capacity (GB): 320
    Speed ​​(RPM): 7200

    Videos:
    Type: PCI-Express
    Processor: ATI
    Model: Radeon HD 4350
    Memory Capacity (MB): 512
    Memory Type: Dedicated

    Audio:
    Type: Integrated

    Optical Drive:
    Type: DVD-RW DL

    And a source as indicated above 400 W? For proper functioning of the system?

    Thank you and if you can wait what

    Thank you

  70. @covimarius: You didn't say anything about the motherboard !!! Everything seems fine to me but the video card seems a bit weak… If you want a gaming system you have to have a good video card, you put in the hard work, you threw yourself at almost the hardest, and you left video card a bit weak in my opinion !! Get an ATI 4650 1G 128 bit, or an ATI 4830 that did a tutorial !!

  71. I could not help but be felicit..sunteti extraordinari..bravo, I've seen the tutorial and is very very good, full of tips, made by a person who really cares about those who do not have with elected components. thank you for your hard work, more

  72. Irina G. said

    Good evening!

    I apologize if my comment is pointless, and it was advisable to ask this question elsewhere. I followed the tutorial because I want to buy a new computer. I tried to follow as much as possible components specified, but the budget does not allow me, so I had to make small changes to the source and housing. I insist that I want to use my computer mainly for gaming, but for small graphics processing and programming. I want to know if the system changed, as in specifications below is compatibil.Va thanks!

    Intel Pentium Dual-Core E5200 2.5GHz Socket 775, Box
    -Memory Kingmax FBGA 2GB DDR2-800 PC6400 Mars.
    -HDD Western Digital 640GB, 7200RPM, 16MB, SATA2
    -Gigabyte-DS43L EP3 Socket 775
    -Source Sirtec 430W, ATX2.2, passive PFC
    -Case Spire SP-7090B Blackfin without source
    -Video Card HIS ATI Radeon HD 4830, 512MB, DDR3, 256bit, PCI-E
    Samsung DVD-RW

  73. @Irina G.:
    Yes it is a pretty good but you can not rely on it as can run the latest games that you can play at a high resolution (eg, 1680 1050) and detailed to the max.
    If I were you I would go to a single processor and I choose E7400 that you can buy it at a price-450 460 (more expensive than E £ 200 5200) lei and choose one source as 500w that will not cost you more than £ 200
    I personally prefer to buy myself a more powerful processor and I get a very inexpensive housing
    I'd rather buy a shell lei 50 60-and when you have more money to buy myself a good one and when I can afford to lose 50 lei (old cover)
    If you give up a case to make a saving of £ 100
    The difference processor (200 lei) + difference source (35lei proposed by me) = £ 235
    235 (difference) - 100 lei (cheap case proposed by me) = 135
    That will need to make a financial effort 135 ron but I have a PC that you can rely on your future remains to change case or if it bothers you too much you can stay with her.
    The decision is yours and I hope you understand what I meant and that I could be useful
    We are still waiting for you and we hope you stay with "videotutorial.ro"

  74. Irina G. said

    @ Boby-admin:
    Thanks for the information provided. Following your advice I came to this configuration:

    -Intel Duo E2 Core7400 2.8GHz, 775 socket, box
    -Memory Kingmax FBGA 2GB DDR2-800 PC6400 Mars.
    -HDD Western Digital 640GB, 7200RPM, 16MB, SATA2
    -Gigabyte-DS43L EP3 Socket 775
    -Source Sirtec 500W, 2.2 ATX, active PFC
    -Case ATX FOXCONN MidleTower 80mm / CS Silver-Black TLA-776 without source
    -Video Card HIS ATI Radeon HD 4830, 512MB, DDR3, 256bit, PCI-E
    Samsung DVD-RW

    I have one question, kind of stupid. I'll have a problem fitting in housing supply? (Keeping in mind that the source preciseaza ATX2.2). If everything else is ok I have to place my order to those in emag.Iti thanks.

  75. @Irina G.:
    I'm glad I've been helpful and that you take this decision reached
    You'll see it's gonna be a lightning calculator and will not feel sorry for the additional investment that you do
    In connection with the source should not worry because it is compatible with housing
    Congratulations on your decision and stick with videotutorial.ro

  76. very good tutorial .. I understand that the motherboard is not very good for overclocking .. can someone recommend me one that would be good for Overclocking?

  77. @Mihai:
    Why do you want to overclock?
    If Christ presented a motherboard over Romania now needs to buy this board
    He just wanted to show how we can buy a pc if you have a smaller budget and I will give you an idea.
    Tell me what your budget and your promise to do a configuration.

  78. I do not want to buy this board, I want another performance-just so!

  79. marian said

    Hello everyone. I would like you to help me with the purchase of a new PC. I proposed to buy the motherboard gigabyte ep31 ds3l or gigabyte ga ep31 ud3l an intel pentium dual core e2200 processor a video card you have radeon hd 4650 and a source of 500w KME ATX \ P4 PK500 (around 150 ron) quite praised although it's relatively cheap, two ram memories of 1 gb each… and from the old pc I would keep the hard drive and the optical drive maybe even the case ..now let me tell you the configuration I have now (note that it's a pc taken from carrefour some time ago) ecs p4m890t-m motherboard nvidia geforce 7100 gs proc pt4 3.00 ghz 512 ram video card and a 400w source (from the intex case) also please note that I want to configure a better pc with but also with less money and I chose the parts I want to buy in relation to the performance of those chosen by Mr. Christ in the tutorial but also with my price and budget… if you have better suggestions do not be shy .. but I do not have a budget than that which totals the skin mentioned adik around 750 le Let's say… by the way I have another perplexity: the processor chosen by my hand is better than the one I already have because I consulted some sites and the one I have seems to me to have performances relatively close to the one I wanted to I buy… ps it's the coolest site I've entered and I think we each have something to learn from here, especially me who watched over 30% of the tutorials.

  80. Adrian said

    @marian: I recommend you as a processor with 5200 E400 cost thousands more than E2200, you recommend it especially if you take a plate DS31L EP3 I got this board!

  81. marian said

    ok. I still have a specific question: I saw on some motherboards that they are campable with proc pentium d (this is the abbreviation for pentium dual core somehow? I did not understand what is the phase) and the video card per acre I chose what do you think adriane? is it good if we look for rap quality, price and source? I'm waiting for others to answer… whoever is invited..especially if they have used or are using these components

  82. Hi Cristi. Please help me with something if you want. I have an I7 system with Intel Core I7 920 processor, Gigabyte x58,6gb Ram OCZ motherboard, XfX Gtx285,3 Tb HDD video card…. I need a very good source to power my current system. I work in 3ds Max, Maya 2008, Cinema 4d, and I also make 3d renderings. I want to tell you that I have a source that can't handle it, it's about the 620w Corsair which if I put the system at work in what I mentioned above restarts. If you have any idea about a very good source please help me. I have 700-800 Ron available at the moment. I am waiting for your answer. Thank you very much. Goodbye

  83. Regards
    I'd like to help please for buying a laptop until 500 euro, about the Miata recommend the process be the motherboard and the video card, please
    a good day

  84. Hello
    Very practical and useful site.
    I would however what about purchasing a system that we designed. Precizes I format system I found on the website of the DC shop. They offer guarantee their stores across the country.
    - ASUS M4A78 motherboard, AMD 770, AM2 / AM2 + / AM3, 4xDual channel DDR2 1200 (OC), 1xPCIEXP16x, 2xPCIEXP1x, 8CH, Gigabit LAN, SATAII, RAID 0, 1, 0 + 1, JBOD, eSATA, ATA133, 2000/5200 MTs, ATX
    - AMD AM3 PhenomII X4 810, 2600Mhz, Cache 6MB, 95W, 45nm, QUAD CORE, BOX
    - Memory KINGSTON KHX8500D2K2 / 4G DDR2 KIT 2GB (2x2GB) 1066MHz CL5, HyperX
    - ASUS EN9600GT / HTDI / 1G video card, GEFORCE 9600GT, PCI EXPRESS 2.0, 1 GB DDR3, 650 / 1800MHz, 256BIT, 2xDVI, HDTV / HDCP, TVO, DVI to HDMI Adapter, Glaciator Fansink
    - HDD (HARD DISK) 500 GB WESTERN DIGITAL, 7200RPM, SATAII, 32MB / AA, CAVIAR GREEN
    - ASUS DVDX / + RW OPTICAL UNIT 20XDVD-R, 6XDVD-RW, 20XDVD + R, 8XDVD + RW, 12XDVD + / -R DL, 12XDVD-RAM, SATA, 2MB BUFFER, LIGHT SCRIBE, RETAIL, BLACK + WHITE
    - THERMALTAKE VB6000SNS SWING HOUSING, SILVER, SECC, 2xUSB 2.0, IEEE1394, AUDIO PORTS, 2x 12CM FAN REAR / FRONT, no SOURCE
    - SEASONIC SS-500ET SOURCE, 500W, 12CM FAN, ACTIVE PFC, 80PLUS (WITH POWER CABLE)
    A good day

  85. Bogdan-designes said

    Daka cre2 I buy an Intel duo d 8400 and I amd cooler I work? or by change and cooleru?

  86. Bogdan-designes: Daka cre2 I buy an Intel duo d 8400 and I amd cooler I work? or by change and cooleru?

    In the first place by knowing that if you have a motherboard with AMD to Intel you need you put a different motherboard for motherboards with AMD proc otherwise soket and cards with Intel proc soket otherwise not You can use the cooler for AMD proc from Intel, I said, if your motherboard has the AMD proc to put your intel you need a different motherboard

  87. Bogdan-designes:
    Daka cre2 I buy an Intel duo d 8400 and I amd cooler I work? or by change and cooleru?

    Salut.Nu go radiator as the core duo 2 yours goes a heatsink from AMD, at least because if you sink socket ului.Dar your specific Intel (socket cooler 775) and you have fan on it, then great care and attention you put a fan but be somewhat functional.

  88. Very useful. While next videotutorial? Of the some time has passed, we have changed stocks, prices, technology etc..

  89. Sallu would like an opinion about video card HIS ATI Radeon HD 4670, 1024MB, DDR3, 128bit, HDMI, PCI-E is good or look for another???

  90. cosminSallu would like an opinion about video card HIS ATI Radeon HD 4670, 1024MB, DDR3, 128bit, HDMI, PCI-Iit is good or look for another???

    cosmine takes an ATI Radeon HD 4850… it's the difference in many things to it… it's much more successful than 4670.

  91. Very satisfied! I wanted to vote for 5 stars but do not know where? Maybe that's why people do not vote. And now concrete: if doing a tutorial = how you promised (in my opinion 3 months, monthly is too often) and AMD do it bro! We got the MSI Gigabyte fan because of you, but may be required on some tutorials exactly that: why not MSI or Gigabyte and Abit? Why Samsung and not LG or Asus? Why not Seagate and Western Digital? And to put you in difficulty: Why Intel and not AMD?
    PS yet how to vote?

  92. ValigwVery satisfied! I wanted to vote for 5 stars but do not know where? Maybe that's why people do not vote. And now concrete: if doing a tutorial = how you promised (in my opinion 3 months, monthly is too often) and AMD do it bro! We got the MSI Gigabyte fan because of you, but may be required on some tutorials exactly that: why not MSI or Gigabyte and Abit? Why Samsung and not LG or Asus? Why not Seagate and Western Digital? And to put you in difficulty: Why Intel and not AMD?
    PS yet how to vote?

    Up above the title as the number of hits you 5 stars if you give us 5 5 stars click on the stars and so on.

  93. Cristi I and I keep wondering if I can put DDR memory ddr2

  94. mihaiCristi I and I keep wondering if I can put DDR memory ddr2

    Known as the DDR is not compatible with DDR1 DDR2 and vice versa, do not fit in any slot, neither the frequency nor the voltage.
    DDR1 is different DDR2 and DDR3, also no DDR2 memory does not match DDR3 although there are motherboards that supports DDR2 and DDR3, for example my base plate has slots DDR4 and 2 2 DDR3 slots, a GigaByte motherboard thirst EP35C-DS3R.

  95. I have a question: You said in the tutorial that you can put 2 PCI-Express video cards can do the same luru and AGP and if so I 2 Nividia FX video cards and other 5500 256 one of 128 know but I am so weak able to put them both on the motherboard?

  96. ddr2 to pass from ddr1 to be changed? thank

    • yfmaza: To pass from ddr2 ddr1 to be changed? Thank  

      I don't see why you would switch from ddr2 to ddr1 when ddr2 are newer, newer generation… Anyway you can't make this switch unless you change the motherboard.

  97. did not read the question carefully. yfmaza: to pass from ddr2 ddr1 to be changed?
    only if the motherboard does not even take me that long.

    • yfmaza: Did not read the question carefully. yfmaza: to pass from ddr2 ddr1 to be changed?
      only if the motherboard does not even take me that long.  

      Dude, you put a question 2 pear in peri 2 I've answered. Day fleshed out what you want to do it because we are not Nostradamus, do not guess people's minds not predict the future!

      DDR1, respectively DDR2 DDR3 are plates RAM. Again, I do not see why you go from DDR2 to DDR1 when DDR2's newer generation and more efficient! What are you doing? detailing!! If your motherboard has memory slots DDR2 DDR1 can not put memories. To use memory DDR1 have to buy a motherboard that has memory slots DDR1

  98. offf I have ram ddr1 memory and I want to install ddr2.I know they are not compatible and I was wondering what other components I need to change in order to use ddr2…

    • yfmaza: Offf ddr1 RAM and I want to put my ddr2.stiu not ask what components are compatible and need to change so I can use ddr2 ...  

      So you can go from the DDR1 DDR2 only need to change the motherboard but you have to account for the new motherboard have the same socket (processor) and watch and what video card you have (if AGP or PCI Express)
      If you want some advice I recommend you do not change a motherboard just to pass the DDR 2 because they do not feel an extra high performance
      If you have a motherboard that supports memory DDR1 suspect that any processor or video card are not too powerful, and then you will need to buy an older motherboard that is compatible with the rest of the computer componenteleor
      I recommend you save money and change your whole system so you do not waste money and not to invest in a dead technology

  99. Thank you very much, boby-admin

  100. ION LIONTE said

    ajutatima varog! Unfortunately to me this videotutorial is descide and go about 12 min.poate anyone help me with advice 1 Thank you!

    • ION LIONTE: Ajutatima varog! Unfortunately to me this videotutorial is descide and go about 12 min.poate anyone help me with advice 1 Thank you!  

      It's from your net of intra and you privestele morning and when the network and the Internet in general is more stink crowded or late at night, to me go all the way! RDS and I met and I am your problem a few days but I see now fixed. The problem is that RDS although they still can not afford selling subscriptions Having a network structure that is based very crowded and yet they still sell ... without increase or stay out extra servers. In almost all the country's problems with RDS, Bucharest people leave them on the ends are wholesale termination, because people are unhappy with the response time in browsing and very low speed during peak hours. It's not the website as saying that, to me tutorial go to the end.

  101. ION LIONTE said

    Mr. ADRIAN Thanks for your advice. Unfortunately I AM NET from Romtelecom and is not the best. I will try tonight very late MAYBE I fail SANSA.DACA MORE THOSE WHO launched a petition can and want to help me send me printrun COMMENT CODE NAME AND MAIN COMPOMPONENTE THEM PROPUNNE DL TUTORIAL Christ. Best regards and thanks ION OF CORNU PRAHOVA.LA LIONTE years and Happy Holidays to all!

  102. Why can not entirely follow tutorials?

  103. I tried to follow the System Setup with very good quality-price ratio - HD video tutorial and at one point appeared to stop Riplay.Am Repeat and had the same result.

  104. lionte ion said

    Gentlemen thank you for advice and help. Today I received MAIL THIS TUTORIAL.M I enjoyed very much. Unfortunately AMERS ONLY 5,5MIN.TOT Today we had a visit from TELECOM FOR LOW SPEED net of the applicant. AM CIRCA 3.5 Mbit / sec PREZENT.DUPA degree they said that over 4 Mbit NOT SUSTINE.ASTEA said DV ask ANY WHICH ARE GOOD AND WILL give me an email with the NAME OF TECHNICAL AND PROPOSED CODE OF DL Christ. Closed at ALL wishing a warm HAPPY BIRTHDAY!, Healthy and prosper VA! WITH SELF LIONTE ION

  105. and I wish you happy holidays, good health and as high speed net.Sunteti best of tutorialisti, I learned a lot from you and will be incontinuare EMIL 1

  106. I give just going to follow my tutorial 15 minutes and stops ..but he's 50 minutes ..dc not work?

  107. lionte ion said

    last night after I received by e-mail from "anonymous" this tutorial I managed to see it in its entirety. I THANK THESE WAYS TO THOSE WHO COULD AND WANTED TO HELP ME. I WANT A GOOD YEAR FULL OF ACHIEVEMENTS. WITH RESPECT LIONTE ION FROM CORNU PRAHOVA!

  108. have configured the EMAG, but are quite expensive. Here's a PC configurator working with multiple companies, it's hard but you have to understand at all. good even to get an idea of ​​what you want and how much it would cost.

  109. I have an older cakcualator January and I want them conponenru new and I want to know if I can put a Intel Pentium ® Dual Core E5300, 2.6GHz Socket 775, Box and Asus Nvidia vedeo placaa GF9500GT, 512MB, DDR3, 128Bit, DVI, a PCI-E motherboard ECS guard P4M890T-M (V1.0) and if not what do you recommend for 500 lei

    • bordan21: I have an older cakcualator January and I want them conponenru new and I want to know if I can put a Intel Pentium ® Dual Core E5300, 2.6GHz Socket 775, Box and Asus Nvidia vedeo placaa GF9500GT, 512MB, DDR3, 128Bit, DVI PCI-E on a plate guard P4M890T-M ECS (V1.0) and if not what do you recommend for 500 lei  

      Please in the future when you leave comments to make the "magnificent" effort to write Romanian and normal and to leave the "vocabulary" of messenger for messenger and your friends.
      In order for you to put that processor on your older PC, you need the motherboard of the "older" PC, which you say will have the socket for the 775 processor because the E5300 processor is on the 775 socket and if the motherboard the base does not have this socket you will not be able to mount the processor on it! You look nice with everest about which we have tutorial, if your board has socket 775 for processor. You can find the tutorial by typing it up in the “Search on videotutorial.ro…” box at the top right: everest, enter it and you will find it.

    • bordan21: I have an older cakcualator January and I want them conponenru new and I want to know if I can put a Intel Pentium ® Dual Core E5300, 2.6GHz Socket 775, Box and Asus Nvidia vedeo placaa GF9500GT, 512MB, DDR3, 128Bit, DVI PCI-E on a plate guard P4M890T-M ECS (V1.0) and if not what do you recommend for 500 lei  Cite me

      in the end you put the processor… and I want to put it on yes I don't know if it supports it ???. ???

  110. mariusrap91 said

    Sal Cristi. I would also like to make a computer from pieces, only the central unit to cost 500-550 euros. Can you help me with all the "stuff" I have to buy? Please help me a lot. Shawl

  111. The motherboard has socket 775 but writes that supports manual says it supports dual core.Imi: 2 core duo, pentium d, pentium and celeron d 4

  112. that's why when tutorials are you?

  113. I have a question… is there any difference between "dual core" and "core 2 duo"?

  114. to give .. and which is better? : P

    • Cristi250 said

      Sergiu: A da .. and which is better? : P  

      Well they're both good but 2 core duo is a little higher than it has dual core cache penteru higher FSB higher, and a higher performance.

  115. matter if it's dual core or core duo 2 when you mount

  116. Costy97 said

    From what I saw in the video, motherboard was

  117. Alin L. said

    Hi, can you give me some advice on a new computer configuration that gives new upgradeable over time? Price not to exceed £ 1000 and .. more desktop use, I do not play, possibly later many a counter strike game, a game that not eating who knows what resources. I also want to be silent

  118. Hi First of all I want to congratulate you for the tutorial, it was very helpful for me to decide what I want from my next PC. After seeing it, I said "ready, I found what I need" so I went to the website of eMAG, to order my PC, but surprise .. they do not have much in stock the pieces you listed. Do you think you can leave me a reply with a few substitutes? I would like the price to be somewhere around 1.800 RON. Thank you very much.

    Regards, Alexandru Ion.

    • AlexHi I first congratulate you for the tutorial, I was one I `great help to me to decide what I want my next PC. After you `ve seen, I said," Okay, I found what I need "so I went on the site of the eMAG` to `me` l PSC order, but surprise .. do not have in stock the parts you have listed you `. k you can leave me a reply with some substitutes? I want the price to be somewhere in 1.800 ron. Thanks frumos.Cu regards, Alexandru Ion.  

      you can do this and you showed in the tutorial you need to have out what to look like and category filter products emag.ro. Emag is not the only online store. You can search the component specified in the tutorial and other online stores. Writing Google: onliine computer stores or online computer stores.

      Or all the EMAG find another video card / processor / motherboard made by another manufacturer but have the same specs or similar to those specified in the tutorial. Do not be so comfortable in thinking. I do not need and will make one work for you.

  119. rogv you explain to me pci express ways are 3 2.0 x16 PCI Express, PCI Express 2.1 x16, PCI Express x16.nu you could do a short tutorial for that I messed with pleasure, I woke CSA is longer . be loved! do a good job

  120. tibyarad: Explain to me you are rogv PCI Express PCI Express 3 2.0 ways x16, 2.1 x16 PCI Express, PCI Express x16.nu you could do a short tutorial for that I messed with pleasure, I woke CSA's lung.fi loved! do a good job  

    To never get tangled, beautiful look at our tutorial on Everest, a utility that tells you everything about your PC including what kind of PCI slot. Write up in the search box to the right of the black border: Everest Ultimate Edition to overclock download installation and setup, you enter, watch the tutorial then you will know what you and the PCI video card to look.

  121. Ok, thanks a lot. I just do not do anything stupid in terms of compatibility of parts ..

    Keep up the good work.

  122. a question. Cooler does not need it? Or we do not heat processors?

    • Adrian admin said

      Cipri: A question. Cooler does not need it? Or we do not heat processors?  

      You know what processor box? If not, I recommend you, if you looked at this tutorial, you forget yourself again but this time without having to rewind it if you want to know what about the cooler.

  123. Video card said

    go to the motherboard video card DDR2 DDR3 and vice versa?

  124. Cristi know that I have opened a source that was burnt and I changed what had burned and wrote on it 450W deastea I mean NO-NAME sources they call cracker and when I opened it was a transformer that wrote him 180W housing and written sources which have 450W hear that 450W :)) and inside it says max 180W to see for yourself the twisted more :)) Good day Cristi

  125. I burned 4 sources in 2 months…: D

  126. Good afternoon. This system cd / dvd room and floppy disk? thanks
    Goodbye

  127. Valentin serbanescu said

    Hello!
    I have a problem that I face for some time.
    I have a PC a little old-fashioned, of the 2007 and want to enhance his performance a little.
    I thought about buying a video card and RAM. There are not experienced because I have a very early age [15ani], so I thought I could get a little help from you.
    I have an Intel (R) Pentium (R) CPU 4 3.06GHz (2 CPUs)
    ASRock 775XFire-VSTA
    Asus Extreme AX550 Series: 512 Mb MHz 400 128-bit DDR2
    RAM: Kingmax DDRII, 533MHz, 512 MB

    I repeat, I would like to buy a ram memory in addition to the existing one [2 gb-> maximum 200 ron], and a video card [maximum 270 rom], but I don't know which one and I don't know which one fits.
    Waiting for some advice.
    Thank you in advance!

  128. Exactly the same pc I configured 2 years ago :))), + from emag: X brings it to your home, anyway the tutorial is very interesting and useful for everyone…
    my pc:
    1x HDD Western Digital Caviar SE16 500GB, 7200rpm, 16MB, SATA2
    1x Intel Pentium Dual-Core E5300, 2.6GHz Socket 775, Box
    Sapphire ATI Radeon video card 1x HD4850 512MB GDDR3 256bit, Dual DVI / TVO, HDMI, HDTV, PCI-E
    Corsair Dual Channel Kit TWIN1X 2x 2x2048MB DDR2, 800MHz 2
    1x Case ATX FOXCONN MidleTower 80mm / CS TSAA-861 without source
    Source 1x Sirtec 430W, ATX2.2, passive PFC
    1x Sony Dual Layer DVD-RW 24x, SATA, black, bulk
    1x Gigabyte EP45-UD3LR Socket 775
    1x HORIZON 2206SW LCD Monitor, 22 ″, wide

  129. I Sall and I need a dak information is poate.am a Biostar P4M900M7 and I PROCESORU INTEL DUAL CORE CURRENT E2180 and I want to switch to an Intel 2 IDEA DUO E7600.AVETI COMPATIBLE DAK DAK's MERGE put on my plate BAZA.MULTUMESC wait for response

    • AdrianGudus said

      ovidiu: Sall am and I need a dak information is poate.am a Biostar P4M900M7 and I PROCESORU INTEL DUAL CORE CURRENT E2180 and I want to switch to an Intel 2 E7600.AVETI IDEA DUO E COMPATIBLE DAK DAK MERGE put on my plate BAZA.MULTUMESC wait for response  

      You can achizitina quiet processor, it is supported by your motherboard since it is based on the same soket 775 1066 and has a FSB of your motherboard supported by the

  130. I have a computer that starts when disconnections wants more from him after I checked the hard drive voltage, power, video card, and I think are good motherboard is the problem and maybe you can help me with some troubleshooting or changing her opinions with other highest-performance and of course compatible with the motherboard is ga-m55s-s3 gigayte v1 am2 socket chipset AMD Athlon nforce550 64 2000mhz

    • AdrianGudus said

      nicu: I have a computer that starts when disconnections wants more from him after I checked the hard drive voltage, power, video card, and I think are good motherboard is the problem and maybe you can help me with some troubleshooting opinions or change them to another of less Efficiency and of course compatibilacu gigayte system board is ga-m55s-s3 v1 am2 socket chipset AMD Athlon nforce550 64 2000mhz  

      Given what was said in the tutorial video above, you can search for a single motherboard, just to be a little careful soket and future FSB supported by the motherboard. Go to Emag or any other store of IT products, and search using the filters AM2 soket processor as mentioned in the tutorial video and see that they have your CPU FSB supported

  131. I also have a question… if I have a dual processor can I put it on a motherboard that had 1 single processor? Do you need another motherboard? to be able to mount a dualcore CPU?

  132. constantin ulariu said

    Cristi
    Please make a KILLER VIRUS ULTRA videotutorial about UVK
    Thanks>

  133. ady marius said

    God, what time has passed? I remember that I made the first pc in pieces, learning from this tutorial what to buy and assembling it at the same time.

Speak Your Mind

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.