Hi friends, this tutorial will show you how to do it online for peace bios update Gigabyte, the update will be done in Windows using the @ Bios is very user friendly.
Last time I showed you how to update the bios with the help of a floppy, unfortunately not everyone has a floppy, even the support for the floppy is on the verge of extinction, that's why I decided to present you the easy version, the version that many are wary, I don't understand why a company like Gigabyte doesn't download a tool that could create motherboard problems, but you know how it is, some are harder to adapt…
The @ Bios utility is super simple, you don't need too much experience to understand it, the trick is to be patient, the update process can be unclear sometimes (during the check, when downloading the update), some users might be tempted to give up, it is not recommended because the bios update is not a game, without bios the motherboard is dead. @ Bios is a precise application, it doesn't start flashing if it's not all right, a carefully made utility, we just flash the bios….
With the @ Bios BIOS update can do on the net, yes you heard right, no need to download a BIOS image before even application can do that, our application will check the BIOS version after our basic plate.
Before writing the image on the chip, we can save the old version to be sure it is even recommended to do this, especially as only takes a few seconds.
After the BIOS update you must restart your PC careful when setting IDE / AHCI after update BIOS settings are reset to factory parameters, that will work in SATA IDE mode, AHCI if you had set before the update, shall immediately enter the BIOS and set AHCI again because Windows will not start.
If you want to introduce new UEFI BIOS from Gigabyte, please write to me in the comments box.
Remember, if you have suggestions, complaints or additions do not hesitate to write in the comments box, de-also if you met the comments box a user has a problem and you can help him, do not hesitate to do it, the only way we can do this place better, see the comments box!
On the comments box trying to get somewhat on the subject so other visitors can offer a tutorial + comments relevant comments may be extra support for user errors, or desire to learn.
Before asking a question try looking through the comments oldest, most times there already answered your question.
Use more categories at the top of the site and the search engine from the right corner to quickly get to what you are interested, we have over 700 tutorials that cover almost every genre of software, we have realized, I you just have to search for them and watch them.Instructions for use videotutorial.ro
Search Engine.
If for example you have a problem with Yahoo Messenger, you can enter in our search engine terms like Yahoo, Mess, Messenger, id mess, multimess problem messenger, messenger error, etc., you will see that you will have a choice.Categories.
If you use category drop-down, they find the bar under Home categories: Office, Graphic-Design, Hardware, Internet, Multimedia, Security, System, Storage, Backup, under these categories are organized sub-categories and sub-sub -categorii, that's a more accurate filtering. To find something related to Yahoo Messenger using the categories you can lead the category:InternetThere will open other subcategories where you choose Voice-ChatFrom there you can go on the subcategory YahooFinally, with these filters will arrive on a page where the only items related to Yahoo Messenger or Yahoo Mail.Archives.
On the page Archives You can find all our tutorials organized beautiful days saptameni, months and years.
Everything is logical, just follow the logic.
Enjoy !
by Cristian Cismaru
About Cristian Cismaru
It is not recommended to do the windows update any motherboard because you can spoil even the BIOS. I happened with a GIGABYTE motherboard, can not remember what model it was, but I know I had an Intel Core2Duo. I did update with "@ BIOS". The board has dual bios, and when I wanted to watch if the update was done, I saw that on the AMIBIOS not changed. It was the stock that came with the motherboard.
If you update the bios on GIGABYTE motherboards have very carefully, because the files are downloaded from the server BIOS Chinese or Japanese, and might download an incomplete bios and a bios flash look corrupt.
If you buy one buy ASUS motherboard that has the function "BIOS Flashback". With this function you can ui flash even if corrupted BIOS from a USB stick with no processor, branched or video card.
Need source USB stick with BIOS file. Press the button and the BIOS update is ready.
Make sure you do if you are not sure you do, or why update the BIOS to wake the computer nebootabil!
if you do and you better ASROCK asrok
It would be helpful if you could do a tutorial on the new GIGABYTE UEFI, so we see the new BIOS and load time of Windows.
About how to update BIOS using a floppy disk or a stick tutorial already exists. You can find the SEARCH box in the sidebar, top right
I got a Gigabyte GA-HA65M-D2H-B3 rev. 1.0 H61 chip and I intend to take a series ATI Radeon 7000 someday. Most likely would have recommended a BIOS update, but until then I think it is time. I also have a small problem i3-2120 processor that does not even fix the 3,3 GHz frequency. I fixed 99,8 MHz FSB CPU instead of 100 MHz and thus having 33x multiplication, CPU frequency only goes up to 3292,5 3300 MHz MHz instead. My source is not just a pan, a source Chieftec Smart GPS 400W 400 and therefore I do not have to think about it. I do not mind that the frequency is slightly lower as needed, but I want to know if a BIOS update might influence this in any way.
Yours sincerely! I have a gigabit card sochet AM3 the problem is that I do not have to see her again on the box it came packaged on the site although the board has 3 revizii.Am review dates are currently available to find the 'speccy' which has the tutorial on the site but did not help in the sense asta.Ce can understand from this? drop a BIOS update in this case?
My first computer was an IBM 5150! And I've had almost 25 computers so far. Nobody uses floppy disks anymore, they can't be found in the store either… The price of a floppy is more expensive than a CD-R or DVD-R. I know how to update the bios, and I did more than 100x… And not just from the floppy disks on the old motherboards that were new in their time. The bios could also be updated by changing the ROM Chip bios manually…
I know what I'm talking about… I'm not that stupid… I had 100 motherboards, which I received for free from a friend who is a geek, who buys components in his computer every year several times ...
I also have a small problem: when I turn on the computer, I wait for it to load and when "welcome" appears, something appears to me and I have to give "Reslove now" or it loads another 5 seconds where it says "Reslove leater". If it can help me someone what can I do to get rid of this !!! Thank you
March of interest and me new BIOS from GIGABYTE
I got a HP bios win 7 preinstalled and I can delete the OS Windows 7.se? I tried to change to linux or bsd (to replace OS) but I had no problems, so I'm back on windoz.ce can do to remove that thing operating system di bios?
What you say is not too clear, I would ask you to enter the BIOS where you say that Windows appears 7 (never heard it) and make a picture with a camera phone or even then to get on tinypic.com for example and give comments here on the link in the box 4
However I suggest you write in the box top right SEARCH: How do I remove partitions that can not be erased, press the Enter key and you will find the tutorial.
Please look at it head-tail, I'm sure it will help and will clarify
In your place I would make an image / clone after the partition you have on Windows 7 (it's original and it's a shame for it….)
Because site update BIOS with the @ BIOS on a Gigabyte motherboard EP43-S3L rev.1.0, the BIOS has not started.
I recommend you do not update your BIOS with @ BIOS.
You specify the motherboard revision appears noted in an edge. Bafta.
Yes I specified revision, as I wrote it rev.1.0.
The revision is also noted on the motherboard on the PCB. Open the cover of the unit and look in its corners with a flashlight to see what it says. You should find it written on one of the corners or under the Chipset (in some cases) "Rev: 2.0"
What you have there you have a Free Dos installed, you can't have windows 7 in bios installed 🙂, on hdd I think. When you can't find the OS installed on your HDD, boot that uncle of "windows 7" as you call it.
Absolutely not bother with anything, do not worry.
Christ Happy Easter to all!
Slut Cristi
I have intrebare.Stiu that is not related to the tutorial but in the past you made a tutorial about Speccy.
I had no problems with it but now when I open it I no longer see any information about the processor video card etc, instead I see a message in orange: Can not initialise SPC dll.L I reinstalled but nothing!
What do you think needs to be done or what is the problem?
Cristi I tried to follow tutorials on smartphones Samsung GT-S6102 and can not be seen like that than, filmed with a camera capture. I tried to install a flash player but not anymore. Do the right thing or simply can not be viewed?
Is there a similar application for foxconnon motherboards? Please if you can do a tutorial about foxconnon boards.
What if when doing a BIOS update / revision blackout occurs?
Cristi Hello!
I don't know what else to do because I simply get "flashing bios failed" every time. I followed the tutorial head on. I tried on all servers, windowsu is newly installed on a new pc (windows 7 x64), and I just can't.
Motherboard is a Gigabyte-d75v b3 1.0 with bios rev f3 and I update the f4.
If you have an idea forward. Thank you!
I did it and I didn't suffer anything but I looked in Everest and it shows me "Suggestion the system BIOS is older than 2 years. Update its content if necessary" I did exactly as in the tutorial and something else, I have the revision 2.0 and on the website in the tutorial when it found my card it said revision 2.x. What's the difference? Is there a problem? I did it and everything works fine but nothing changed in the bios and in everst it says what I put in up. Thank you
Hi, I really need the link to the video with "flash bios" - floppy / floppy ..
I tried to flash with 'bios flash' which was on the CD on the p4m900-m4 board .. and it gave me an error .. now I can no longer enter the bios / windows .. and I think that if I try to flash again with floppy I would solve the problem -_-
anyone post the link to the video guy, please
thank you in advance
Hello Christ isti
Congratulations with the tutorial… I kiar dak nam Gigabyte, I have ECS, I understand what is the trick of operation. I called you with a problem. Christ I have a video card asus en8800gts (ASUS NVIDIA 8800 GTS 320mb / 320bit and what to see. 2 weeks I inked the PC (PC consisting of: ECS GeForce 7050 mm v2.0 rev 2.0 board, AMD Athlon 64 4800+ 2.5 Ghz Dual Core processor, 4 gb ddr2 (800mhz) hdd 320 gb) and aqm about 5 days I gave the road again. What can you see, my video card, the parka was dead… it didn't give a signal anymore, but it works, and aqm works, that is, it enters the current, it heats up, the collar behaves normally. about 3 times, I changed 3 operating systems about 6 times (twice WIN XP, 1 time WIN VISTA 3 times WIN &) I thought ke from the system. but not. The nasty part is that with it put socket, my pc starts on the integrated board with the signal, but GEFORCE 8800 gts, it doesn't want to. Please call me to try another board as I don't know where. I thought that the socket was taken from home and in vain I try. Yes, neah, that my manager appears in the default like this: 3D Video Controller. CODE ERROR 28. I searched for the code, I found the explanation (one stupid0 = the driver is NOT installed, well and mm how do I install it, when I start the installation software and don't see the board (that's what happens). AND I think I'm crazy. I don't even know what the hell to do…. I'm waiting for an answer
Hi Cristi, how do I upgrade the BIOS if motherboard nvidia nforce mcp2, I followed the tutorial how to open pc 'in the double-click or keyboard and I have the 2 Options in BIOS .. I `m thinking if she do I upgrade bios The options that appears. Thank you very much for your help
Hello
I recently purchased a dual core Pentium D 925 3.0Ghz / 4M / 800 / socket LGA 775
I pulled an old Celeron processor and I did update the bios now hangs
or restarts the keyboard buttons and 1234 789 56 butoanela not go go
can someone help me?
Pentium D dual core 925 3.0Ghz / 4M / 800 / socket LGA 775
http://www.cpu-world.com/CPUs/Pentium_D/Intel-Pentium%20D%20925%20HH80553PG0804MN%20(BX80553925).html
Motherboard: GA-945PL-S3P
http://www.gigabyte.com.ro/products/product-page.aspx?pid=2541#ov
Hi Cristi… Just like you have a gigabyte socket 775 motherboard but another model, namely GA-G31M-ES2L rev.1.1
I would like to do a bios update because I will buy a new Intel Core 2 Duo E8400 processor and I think that on the current version of the bios dating from 2008 when I have a pc it will not work… But I followed your tutorial exactly but not for me find the utility @ Bios… I only find these 2 programs: Xpress Recovery2 and Easy Energy Saver… So better try to update the bios by the stick method because I don't floopy? I'm waiting for an answer thanks!
I have a problem with the motherboard… when I try to put a dvd, hdd any change cuts me 3 times as if it was my fault ram memory but I tried ram memory on another pc and it works perfectly… I tried to update at the bios and I woke up with an error 🙁
"Http://xx.ucoz.com/bios.bmp"
I made a print screen to see what error yes…
mention that recovers motherboard and use. do a stage: sometimes when I open it shows me the name plate as buteaza in windows and screen remains black. all this in less than a second when normally done little 20 seconds.
although asi think it's the video card that I have built asi try a bios update maybe that's the problem
ps I motherboard: gigabyte m61sme-s2 rev 2.1
After the BIOS update you must restart your PC careful when setting IDE / AHCI after update BIOS settings are reset to factory settings, that will work in SATA IDE mode if you were set to AHCI before the update, must immediately enter the bios and set AHCI again because Windows will not start. Mention that hold this motherboard I update the bios, I tried to set my back goes AHCI but it gives me an error and will not but if you leave the windows buteaza IDE working properly ie buteaza
Cristi Hello!
I have a Gigabyte motherboard Z77 D3H. Version of BIOS (Dual UEFI BIOS) is F18 / 21.08.2012.
Looking back on Gigabyte I noticed that, in the meantime appeared 2 F21 and improved versions F22 and F23 Beta version. I would ask you to tell me whether it is appropriate to do up-date and if done with a particular program, or install, simply download the file on the net?
Thank you!
hello. I have a gigabyte g1 assasin 2 motherboard and I had to flash the bios with the latest 12w version as if to work with the i7 4820k processor. before seeing your tutorial which is very useful among others. I did the same things .he asked me to reboot and no longer boots my windos. it stays a bit on the image with the options to enter the bios after which a black screen with a dash on the top left. The strange thing is that I can't enter the bios. I can't do anything anymore. if you know what I can do to fix the "mistake" I would be grateful… !!!!! is it something irreparable or can you flash directly on the motherboard with a floppy ??? THANK YOU….!!!!!!
I followed the steps sal site shows me modelu the chipset gigabyte adica780g but give modelu call from motherboard GA-780T-D3L can help me to look elsewhere ?? overhaul the chipset is 00